lo 5-3895-385-13

8/3/2019 LO 5-3895-385-13

1/20

LO 5-3895-385-13

Card 1 of 18

LUBRICATION ORDERFOR

BITUMINOUS MATERIAL PAVING MACHINE (BMPM)(NSN 3895-01-577-2425)

MODEL 8816MCAGEC (58785)

EIC: 6IO

References: TM 5-3895-385-10, TM 5-3895-385-23, and TM 5-3895-385-24P

REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS

You can help improve this publication. If you find any errors, or if you would like to recommend any

improvements to the procedures in this publication, please let us know. The preferred method is tosubmit your DA Form 2028 (Recommended Changes to Publications and Blank Forms) through theInternet on the TACOM Unique Logistics Support Applications (TULSA) Web site. The Internet address ishttps://tulsa.tacom.army.mil. Access to all applications requires CAC authentication, and you mustcomplete the Access Request form the first time you use it. The DA Form 2028 is located under theTULSA Applications on the left-hand navigation bar. Fill out the form and click on SUBMIT. Using thisform on the TULSA Web site will enable us to respond more quickly to your comments and to better manage the DA Form 2028 program. You may also mail, e-mail, or fax your comments or DA Form 2028directly to the U.S. Army TACOM Life Cycle Management Command. The postal mail address is U.S.Army TACOM Life Cycle Management Command, ATTN: AMSTA-LCL-MPP/ TECH PUBS, MS 727, 6501E. 11 Mile Road, Warren, MI 48397-5000. The e-mail address is [email protected] fax number is DSN 786-1856 or Commercial (586) 282-1856. A reply will be furnished to you.

DISTRIBUTION STATEMENT A Approved for public release; distribution is unlimited.NOTICE A copy of this lubrication order will remain with the equipment at all times; instructions contained

herein are mandatory.

HEADQUARTERS, DEPARTMENT OF THE ARMY28 NOVEMBER 2011

8/3/2019 LO 5-3895-385-13

2/20

LO 5-3895-385-13

Card 2 of 18

GENERAL

This Lubrication Order (LO) is for operator or field maintenance. The localized views (LV A LV AG) illustrate thespecific lubrication items on the Bituminous Material Paving Machine (BMPM). Lube intervals (on-condition or hardtime) are based on normal operation. Lube more during constant use and less during inactive periods. Use

correct grade of lubricant for seasonal temperature expected.Engine, transmission, and hydraulic system oil filters shall be changed:

a) When they are contaminated or known to be clogged.

b) At prescribed hard time intervals.

Clean all fittings and areas around lubrication points with dry cleaning solvent or equivalent before lubricatingequipment. After lubrication, wipe off excess oil or grease to prevent accumulation of foreign matter.

Before you start your lube service:

ALWAYS

a) Clean grease fittings before lubrication.

b) Use the lubrication order as your guide.NEVER

a) Use wrong type/grade grease.

b) Use too much lubricant.

Army Oil Analysis Program (AOAP) Sampling Statement

This BMPM is not enrolled in the AOAP. HARDTIME INTERVALS APPLY.

Warranty Hardtime Statement

For equipment under manufacturers warranty, hardtime oil service intervals shall be followed. Intervals shall beshortened if lubricants are known to be contaminated or if operation is under adverse conditions such as longer than usual operating hours, extended idling periods, extreme dust, etc.

8/3/2019 LO 5-3895-385-13

3/20

LO 5-3895-385-13

Card 3 of 18

Explanation of Interval Symbols

Table. 1 Maintenance Level Symbols

Symbol Maintenance Level

C Crew

F Field

H Below Depot

L Specialized Repair

D Depot

Table. 2 Man Hours

Interval Man-Hours

10 1.0

100 4.0

250 2.0

500 16.0

Table 3. Lubricant Table for Engine

ITEM TEMPERATURERANGE

LUBRICANT MIL.SYMBOL (NATO

CODE)SPECIFICATION CAPACITY INTERVAL

1 0F to +120F(+18C to +49C)

OE/HDO-15/40(SAE 15W-40)MIL-PRF-2104

12 qt (11.35 L) 500 hrs

8/3/2019 LO 5-3895-385-13

4/20

8/3/2019 LO 5-3895-385-13

5/20

LO 5-3895-385-13

Card 5 of 18

Table 7. Lubricant Table for Cooling System


LUBRICANT MIL.

SYMBOL (NATOCODE)SPECIFICATION CAPACITY INTERVAL

1 -10F to +120F(-23C to +49C)

CID-A-A-52624(Type I)

12 qt (11.35 L) 500 hrs

Table 8. Lubricant Table for Track Drive Torque Hub




1 -10F to +120F(-23C to +49C)

GO-80/90(SAE 80W-90)MIL-PRF-2105

32 oz (0.355 L)each

100 hrs

Table 9. Lubricant Table for Conveyor Torque Hub




1 -10F to +120F(-23C to +49C)

GO-80/90(SAE 80W-90)MIL-PRF-2105

0.625 qt (0.59 L) 10 hrs

8/3/2019 LO 5-3895-385-13

6/20

LO 5-3895-385-13

Card 6 of 18

Table 10. Lubricant Table for Conveyor Drive Chain Assemblies


LUBRICANT MIL.

SYMBOL (NATOCODE)SPECIFICATION CAPACITY INTERVAL

1 -50F to +120F(-46C to +49C)

LPS-1Chain LubricantMIL-C-23411A

N/A 10 hrs

Table 11. Lubricant Table for Auger Drive Chain Assemblies




1 -50F to +120F(-46C to +49C)


N/A 10 hrs

Table 12. Lubricant Table for Screed Crown Chain Assemblies




1 -50F to +120F(-46C to +49C)


N/A 10 hrs

8/3/2019 LO 5-3895-385-13

7/20

LO 5-3895-385-13

Card 7 of 18

Table 13. Lubricant Table for BMPM Fuel




1 -50F to +120F(-46C to +49C)

JP-8 (F-34)MIL-DTL-83133

60 gal 10 hrs

8/3/2019 LO 5-3895-385-13

8/20

LO 5-3895-385-13

Card 8 of 18

8/3/2019 LO 5-3895-385-13

9/20

8/3/2019 LO 5-3895-385-13

10/20

LO 5-3895-385-13

Card 10 of 18

8/3/2019 LO 5-3895-385-13

11/20

LO 5-3895-385-13

LOCALIZED VIEWS

Card 11 of 18

8/3/2019 LO 5-3895-385-13

12/20

8/3/2019 LO 5-3895-385-13

13/20

LO 5-3895-385-13

LOCALIZED VIEWS

Card 13 of 18

8/3/2019 LO 5-3895-385-13

14/20

LO 5-3895-385-13

LOCALIZED VIEWS

Card 14 of 18

8/3/2019 LO 5-3895-385-13

15/20

LO 5-3895-385-13

LOCALIZED VIEWS

Card 15 of 18

8/3/2019 LO 5-3895-385-13

16/20

LO 5-3895-385-13

LOCALIZED VIEWS

Card 16 of 18

8/3/2019 LO 5-3895-385-13

17/20

LO 5-3895-385-13

Card 17 of 18/Card 18 of 18 blank

NOTES:

1. Engine Oil. If engine has been running, wait10 minutes for oil to drain back into the oil

pan before checking. Oil level should bebetween the Add and Full marks on theengine oil level gage. Change engine oilevery 100 hours.

2. Engine Oil Filter . The engine oil filter should be changed with every engine oilservice.

3. Engine Coolant. Coolant level in recoverytank must be between hot and cold lines onthe side of the coolant reservoir. If no

coolant level is visible in coolant reservoir,remove radiator cap and add coolant toradiator and recovery tank. Change enginecoolant every 500 hours.

4. Hydraulic System Oil. Check the hydraulicoil level from the liquid sight indicator . Drainand fill the hydraulic tank every 500 hours.

5. Hydraulic Charge Filter. The hydrauliccharge filter is to be replaced every 250hours or whenever a complete hydraulic oilflush is performed.

6. Hydraulic Return Filter. The hydraulicreturn filter is to be replaced every 250hours or whenever a complete hydraulic oilflush is performed.

7. Drive Torque Hub. Check the torque hub oilevery 100 hours and add oil as necessary.Oil should come out from the check plug onthe torque hub. If it does not, remove the fillplug and fill torque hub. Change the oil inthe drive torque hubs every 500 hours.

8. Conveyor Torque Hub. Change the oil inthe conveyor torque hubs every 500 hours.

9. Conveyor Drive Chains. Lubricateconveyor drive chains daily with chain lube.

10. Grease Fittings. Lubricate each greasefitting In Accordance With (IAW) PreventiveMaintenance Checks and Services (PMCS).

11. Fuel Filter. Replace the fuel filter every 500hours.

12. Spin-On Fuel Filter. Replace the spin-onfuel filter every 500 hours.

13. Double Pump Drive Oil. Change the oil inthe double pump drive every 500 hours.

14. Auger Drive Chains. Lubricate auger drivechains daily with chain lube.

15. Screed Crown Chains. Lubricate screedcrown chains daily with chain lube.

8/3/2019 LO 5-3895-385-13

18/20

8/3/2019 LO 5-3895-385-13

19/20

By Order of the Secretary of the Army:

RAYMOND T. ODIERNOGeneral, United States Army

Chief of Staff

1129010

JOYCE E. MORROW Administrative Assistant to the

Secretar y of the Army

Official:

Distribution:

To be distributed in accordance with the initial distribution number (IDN) 257889requirements for LO 5-3895-385-13.

8/3/2019 LO 5-3895-385-13

20/20

PIN: 086332-000

lo 5-3895-385-13

Documents