grasas lubricantes de alto rendimiento high...

Download GRASAS LUBRICANTES DE ALTO RENDIMIENTO HIGH …noticiasdeferreteria.es/catalogos/lubricantes-brugarolas_grasas... · Las grasas lubricantes de BRUGAROLAS, S .A. han sido formuladas

If you can't read please download the document

Upload: donga

Post on 10-Feb-2018

247 views

Category:

Documents


2 download

TRANSCRIPT

  • GRASAS LUBRICANTES DE ALTO RENDIMIENTO

    HIGH PERFORMANCELUBRICATING GREASES

  • Las grasas lubricantes de BRUGAROLAS, S .A. han sido

    formuladas partiendo del anlisis de problemas concretos, a

    los que se han dado soluciones adecuadas.

    Nuestros laboratorios han desarrollado productos especficos

    para garantizar un ALTO RENDIMIENTO en situaciones

    diferentes. Esta es la razn de la amplitud de opciones que

    BRUGAROLAS, S.A., pone en sus manos; productos

    fabricados bajo los mas estrictos controles de calidad y

    respetando las actuales exigencias sobre bio-compatibilidad y

    eco-toxicidad, relativas a los productos lubricantes.

    En la documentacin adjunta les ofrecemos informacin

    sobre la GAMA de GRASAS LUBRICANTES "AGUILA" y

    "BESLUX". Esta informacin puede ser ampliada consultado

    la correspondiente Hoja Tcnica del producto.

    BRUGAROLAS S.A. respalda esta gama con el Departamento

    de I+D de grasas lubricantes, responsable de la constante

    optimizacin y desarrollo de este tipo de productos.

    BRUGAROLAS, S.A. pone a su disposicin su experimentado

    equipo de especialistas para analizar cualquier situacin

    concreta y su capacidad de creacin de productos "a medida",

    en caso necesario, para solucionar sus problemas de

    lubricacin, problemas de desgastes y roturas prematuras,

    as como racionalizacin de las grasas empleadas, etc.

    No dude en consultarnos y encontraremos la solucin ms

    idnea para su problema.

    The lubricating greases manufactured by BRUGAROLAS, S.A.

    have been formulated starting from the analysis of concrete

    problems, that have been solved with proper solutions.

    Our labs. have developed specific products to ensure a HIGH

    PERFORMANCE in different situations. This is why

    BRUBAROLAS, S.A. brings you many options to allow your

    choice, with products manufactured under the most severe

    quality controls, respecting the present requirements

    regarding Bio-Compatibility and Eco-Toxicity, in the

    lubricants.

    In the attached documentation we give you information on

    the "AGUILA" and "BESLUX" RANGES OF LUBRICATING

    GREASES. This information may be extended by consulting

    ths product THECNICAL DATA SHEET (TDS).

    BRUGAROLAS, S.A. supports this range by our I+D

    department, responsible of the constant optimization and

    developpement of such products type.

    BRUGAROLAS, S.A offers you our well experienced

    specialist's team that will precede to analysis each case and

    our capacity to create a "Taylor made" product, if necessary, to

    solve your lubrication problems, wear problems, early

    breakages, and rationalization of used greases. etc

    Do not doubt to consult as and we will find the most suitable

    solution to your problem.

    GRASAS LUBRICANTESDE ALTO RENDIEMIENTO

    HIGH PERFORMANCELUBICATING GREASES

  • La consistencia de las grasas se mide con el Ensayo de

    penetracin, y se mide con el Penetrmetro

    Este ensayo consiste en dejar que un cono, de peso y

    dimensiones estndar, penetre en el seno de la grasa, a 25

    C, por la accin de su propio peso, durante 5 segundos. Este

    ensayo est definido por la norma ISO-DIN 2137. El resultado

    de ensayo se mide en "dcimas de milmetro" (mm x 0,1)

    Es muy importante que el ensayo se realice a 25 C, pues la

    "dureza" de la grasa vara con la temperatura y si no es as,

    podemos obtener valores errneos.

    El N.L.G.I. (Nacional Lubricants and Greases Intitute)

    clasifica las grasas en "grados de consistencia" segn el valor

    de su penetracin. La tabla adjunta nos muestra la relacin

    entre los grados de consistencia y su correspondiente

    intervalo de penetracin.

    The consistency of greases is measured by the Penetration

    test, with the "Penetrometer"

    The test basically is to allow a cone, with standard weight and

    dimensions; penetrate inside the grease, at 25 C, by its own

    weight, during 5 seconds. This test is defined by ISO-DIN

    2137 standard. The results are measured in tenth of

    millimetre (mm x 0,1)

    It is very important to make the test at 25 C, because the

    "hardness" of the grease changes with the temperature and, if

    not, we can obtain incorrect values

    The N.L.G.I. (National Lubricants and Greases Institute),

    .classifies the greases on "Consistency degrees". The attached

    table shows the relation between consistency degree and its

    corresponding penetration interval.

    CLASIFICACIN DE LASGRASAS SEGN SUCONSISTENCIA

    GREASESCLASSIFICATION AS PERITS CONSISTENCY

    C s N G P t s O 2 (mm 0lass N I P o s DIN I 2 7 )

    2 Para estas penetraciones hay que usar un cono especial de metal Hender.For these penetrations is necessery to use a special cone, made on "metal Hender".

    2 2 222 2

    4 175/205 Las siguientes penetraciones ya no se usan.5 130/160 The following penetrations are not used.6 85/115

  • GRASAS AGUILAAGUILA GREASES

    GRASAS CALCICAS / ANHYDROUS CALCIUM GREASES

    Grasas Clcicas basadas en aceite mineral muy untuosas y anticorrosivas; muy resistentes al agua para engrase general desuperficies metlicas, articulaciones y chasis.

    GRASAS LITICO-CALCICAS ESPECIALES / SPECIAL LITHIUM-CALCIUM GREASES

    Grasas de jabn de litio-calcio, con aceites especiales, para aplicaciones especiales.

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo

    G A RMIGRAS 82 2 265/295 Sinttico / Synthetic >130C -60/110C

    G A 400/0 0

    0

    345/365

    345/365

    Mineral

    Mineral

    >130C

    G A 410 1 310/340 Mineral >130C

    G A 420 2 265/295 Mineral >135C

    G A 420/3 3 220/250 Mineral >135C

    G A JET 70 2 265/295 Semi-Sinttico/ >145C -10/110C

    Alto poder sellante y adherente. Resistente a la Atmsfera marina. Velocidades medias /bajas.

    2 265/295 Mineral > 140C -50/110C (125)

    00 400/430 Mineral > 115C -50/110C

    ANHIDRAS

    Calcium greases based on mineral oil very unctuous and anticorrosive; a very good water resistance for general lubrication of metallic surfaces, frames and carbodies

    Grasas de alta capacidad lubricante y anticorrosiva. Lub mecanismos de baja temperatura.*G.A. N 31 Cumple la norma - Renault 03.08.200-31 - Factor de velocidad (Dn)= 6x10

    Outstanding lubricating and anticorrosive properties. Mechanisms operating at low temp.*G.A n 31 Meets - Renault specification 03.08.200-31 - Speed factor (Dn)=6x10

    Calcium-lithium soap greases, with special oils, for special applications.

    Grasa especial de base sinttica, para muy bajas temperaturas. Especial para Automocin y Armamento.Cumple la norma MIL-G-10924 DEF STAN D 91-27/3, cdigo OTAN G-403.Special grease, synthetic based for very low Temp. Special for military Cars& weapons.Meets specification MIL-G-10924-D, DEF STAN D 91-27/3, cdigo NATO G-403.

    Outstanding sealing capacity and adherence. Sea environtment resistant. Medium/low speed.

    Product NLGI Penetration Base Oil Drop Point Working Temperature

    Product NLGI Penetration Base Oil Drop Point Working Temperature

    Product NLGI Penetration Base Oil Drop Point Working Temperature

    G N.A -20/90C

    -20/90C

    -20/90C

    -20/90C

    -20/90C

    G.A. N31

    G.A. N31/00

    G ICA EP 2 2 265/295 Mineral min 180C -20/120C

    Semi-Synthetic

    5

    5

    GRASAS CLCICAS ESPECIALES /

    GRASAS CLCICAS CONVENCIONALES / CALCIUM CONVENTIONAL GREASES

    SPECIAL CALCIUM GREASES

  • GRASA CALCICO ANHIDRAS GRAFITADAS / GRAPHITATED ANHYDROUS-CALCIUM GREASES

    Grasas ltico-clcicas con grafito, con alto poder lubricante. Para mecanismos sometidos a altas cargas y esfuerzos de choque.Especiales para lubricacin de ferrocarriles.

    ojabart ed arutarepmeTatoG otnuPesaB etiecAnicartenePIGLNotcudorP

    G C D 00 400/430 Mineral N.A. -10/90C

    G C D 0 335/385 Mineral 100C -10/90C

    G C D 1 310/340 Mineral 140C -10/90C

    G C D 2 2 265/285 Mineral 140C -10/90C

    G C D 3 220/250 Mineral 140C -10/90C

    GRASAS LITICAS MULTIFUNCIONALES Y ANTIDESGASTE / LITHIUM MULTI PURPOSE & ANTIWEAR GREASES

    Grasas de litio y aceite mineral, para la lubricacin de rodamientos trabajando en condiciones normales de carga ytemperatura. Alta capacidad antioxidante y anticorrosiva. Resistentes al agua.

    Lithium greases, based on mineral oil, for Bearings lubrication working under normal conditions of load and temperature.Outstanding antioxidant and anticorrosive properties. Water resistant.

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo ColorProduct NLGI Penetration Base Oil Drop Point Working Temperature Colour

    G 1 310/340 Mineral 175C -20/120C Marrn Oscuro/Dark Brown

    G 2 265/295 Mineral 180C -20/120C Marrn Oscuro/Dark Brown

    G 3 220/250 Mineral 180C -20/120C Marrn Oscuro/Dark Brown

    G 0 355/385 Mineral 170C -30/120C Marrn Claro/Light Brown

    G 1 310/340 Mineral 175C -30/120C Marrn Claro/Light Brown

    G 2 265/295 Mineral 180C -30/120C Marrn Claro/Light Brown

    G 3 220/250 Mineral 180C -30/120C Marrn Claro/Light Brown

    G N 800/TF (*) 2 265/295 Mineral 180C -30/120C Beige/ Beige

    2 265/295 Mineral 180C -30/120C Marrn Oscuro/Dark Brown

    t nt t ( para rodamientos de bolas, rodillos y agujas en camiones y autocares.Cumple la norma t y la especificacin militar D G .

    s for balls, rollers, needles and bearings of trucks and buses.Meets type B and military standard 0

    GRASAS LITICAS / LITHIUM GREASES

    2 2 265/295 Sinttico/Synthetic 190C -40/120C

    Grasa especial para bajas temperaturas. Lubricacin equipos automvil. Norma TRW 2Special low Temp. grease. Car parts lubrication, meets TRW standard S 82.

    (*) Contiene PTFE(*) F

    Cumple especificacin ADIF

    Product NLGI Penetration Base Oil Drop Point Working Temperature

    Calcium-Lithium greases with graphite, high lubrication capacity. For mechanisms submitted high load and strong shock-stress. Specially intended for Rail-Ways lubrication. Meet ADIF specification.

  • GRASAS LITICAS EXTREMA PRESION (E.P.) / LITHIUM EXTREME PRESURE (E.P.)GREASES

    Grasas de litio y aceite mineral, con aditivos E.P. para lubricacin de mecanismos y rodamientos que trabajen atemperaturas y cargas elevadas. Excelente resistencia al agua.

    Mineral oil based lithium greases with E.P. additives for lubrication of loaded mechanisms and bearings working at hightemperature end load. Excellent water resistance.

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo Carga SoldaduraProduct NLGI Penetration Base Oil Drop Point Working Temperature Welding Load

    G N 0 355/385 Mineral 175C -20/120C >400 Kgf

    G N 1 310/340 Mineral 175C -20/120C >400 Kgf

    G N 2 2 265/295 Mineral 180C -20/120C >400 Kgf

    3 220/250 Mineral 180C -20/120C >400 Kgf

    0000 490/520 Mineral N.A.

    N.A.

    N.A.

    N.A.

    -20/120C >250 Kgf

    G N 0 000 445/475 Mineral -20/120C >250 Kgf

    G N 00 400/430 Mineral -20/120C >250 Kgf

    G N 0 355/385 Mineral 170C -25/120C >250 Kgf

    G N 1 310/340 Mineral 175C -25/120C >250 Kgf

    G N 2 2 265/295 Mineral 180C -25/120C >250 Kgf

    G N 3 220/250 Mineral 180C -25/120C >250 Kgf

    G 00 400/430 Mineral -20/125C >300 Kgf

    G 0 355/385 Mineral >165C -20/125C >300 Kgf

    G 1 310/340 Mineral 160C -20/125C >300 Kgf

    G 2 2 265/295 Mineral 185C -20/125C >340 Kgf

    G 3 220/250 Mineral >185C -20/125C >340 Kgf

    G A 1/2 270/300 Mineral > 185C -20/120 (140)

    (140)

    (140)

    C >340 Kgf

    G A 0 355/385 Mineral >170C -20/120C >340 Kgf

    G A 2/3 260/280 Mineral > 185 -20/120C >340 Kgf

    El tipo G N 850 EP 2 cumple la norma NISSAN NES 5065 t po NWB 2G N 850 EP-2 meets NISSAN standard NES 5065 NWB-2 type

    GRASAS LITICAS E.P. CON BISULFURO DE MOLIBDENO / LITHIUM E.P.GREASES WITH MOLIBDENUM BISULPHIDE

    Grasas de litio con aditivos E.P., antidesgaste, antioxidantes, anticorrosivos y lubricantes slidos, (Bisulfuro deMolibdeno), para la lubricacin de mecanismos y rodamientos sometidos a cargas muy elevadas y esfuerzos de choque.

    Lithium greases with E.P., antiwear, antioxidant, antirust additives and solid lubricants (Molibdenum bisulphide) forlubrication of mechanisms and bearings exposed to very high loads and shock stresses.

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo Carga SoldaduraProduct NLGI Penetration Base Oil Drop Point Working Temperature Welding Load

    G 2 265/295 Mineral >180C -20/120C (140C) 400 Kgf

    G O 1 310/340 Mineral >175C -20/120C (140C) >300 Kgf

    G O 2 265/295 Mineral >180C -20/120C (140C) >300 Kgf

    G O 3 220/250 Mineral >180C -20/120C (140C) >300 Kgf

    G U 2 265/295 Mineral >185C -30/120C (140C

    (140C)

    (145C)

    (145C)

    ) >350 Kgf

    G 2 2 265/295 Mineral >180C -25/140C >400 Kgf

    G 0 355/385 Mineral >175C -25/130C >350 Kgf

    G 1 310/340 Mineral >180C -25/130C >350 Kgf

    G 2 2 265/295 Mineral >180C -25/130C >350 Kgf

    2 N

    AURE EH-0 GREEN

    AUREA EH 2 GREEN

    G N 70 EP 3

    GRASAS LITIC0-CALCICAS EXTREMA PRESION (E.P) / LITHIUM-CALCIUM EP GREASES

  • Grasas inorgnicas, sin punto de gota, para aplicaciones especiales en altas o muy bajas temperaturas.

    Inorganic greases, without droping Point for special applications, high t emp. or very low temp.

    Producto NLGI Penetracin Aceite Base Temperatura de trabajoProduct NLGI Penetration Base Oil Working Temperature

    G N V S

    G UNIVERSA H-2

    C051/01-lareniM592/5622

    C051/01-lareniM582/5522/3

    G N V S 2 265/295 Mineral alta viscosidad/High viscosity mineral -10/150C

    GRASAS INORGNICAS / INORGANIC GREASES

    G UNIVERSA 6 1/2 280/300 Sinttico/Synthetic -50/130C

    G RMIBR S BT 2 2 265/295 Sinttico/Synthetic -55/180C

    Cumple la norma MI G 81 322 G, para lubricacin de accesorios de helicpteros Meets the MI G 81 322 G, for helicopters accessories lubrication

    Grasas de litio complejo con aceite mineral. Alta capacidad lubricante y buena resistencia al agua. Adecuadas para altastemperaturas, altas cargas o altas velocidades.

    Lithium complex greases, mineral oil based with high lubrication capacity and water resistance, Suitable for hightemperature, heavy loads or high speeds.

    GRASAS DE LITIO COMPLEJO / LITHIUM COMPLEX GREASES

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajoProduct NLGI Penetration Base Oil Drop Point Working Temperature

    G P 1 310/340 Mineral >240C -20/150C

    G P 2 265/295 Mineral >245C -20/150C

    G P 3 220/250 Mineral >250C -20/150C

    G X /2 1/2 290/310 Mineral >240C -20/150C

    G X /2 1/2 300/330 Mineral >240C -20/150C

    G X N 00 2 265/295 Mineral >260C -30/160C

    2 3 Z 2/3 245/265 Mineral >280C -30/150C

    >245C -35/150C X 2 B 2 265/295 Semisinttico/

    G A AR IGRAS 40 2 265/295 Sinttico/Syntheti

    Semi-Synthetic

    c >250C -55/160 (180)C

    Cumple la norma I PFR 09 G2 GM NAT 4eets MI PFR 10924 G standard.

    Grasas basadas en aceite mineral, con muy buenas propiedades lubricantes y anticorrosivas. Altamente resistentes alagua. Su alta bombeabilidad las hace muy adecuadas para sistemas de engrase centralizados de gran longitud(Siderurgia, etc.).

    Greases mineral oil based, with very good lubricating and anticorrosive properties. Very high water resistance.Outstanding pumpabilit, it's very suitable for large centralized greasing systems.(Steel industry, etc.).

    GRASAS DE ALUMINIO COMPLEJO / ALUMINIUM COMPLEX GREASES

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo Lub SolidosProduct NLGI Penetration Base Oil Drop Point Working Temperature Solid Lub

    1/2 290/310 Semisinttico/Semi-Synthetic 250C -10/160C (180C) Azul/Blue

    G X 1 310/340 Mineral Viscoso/Mineral Viscous 240C -15/160C (180C) NO

    G X 2 2 265/295 Mineral Viscoso/Mineral Viscous 250C -15/160C (180C) NO

    G X / 0/1 340/360 Mineral Viscoso/Mineral Viscous 250C -15/160C (180C) Grafito/Graphite

    G X / 1/2 285/300 Mineral Viscoso/Mineral Viscous 250C -15/160C (180C) Grafito/Graphite

    2 265/295 Semisinttico/Semi-Synthetic 250C -10/160C (180C) Azul/Blue

  • Gama de grasas basadas en aceite mineral, con alta resistencia a la Oxidacin; contienen aditivos antioxidantes queaseguran una alto rendimiento a temperaturas elevadas. Altamente resistente al agua, son tambin muy bombeables.

    Range mineral oil greases with high resistance to oxidation; contains antioxidant additives to provide high efficiency underhigh temperatures. Highly water resistance and pumpability

    ojabart ed arutarepmeTatoG otnuPesaB etiecAnicartenePIGLNotcudorPerutarepmeT gnikroWtnioP porDliO esaBnoitartenePIGLNtcudorP

    ojabart ed arutarepmeTatoG otnuPesaB etiecAnicartenePIGLNotcudorPerutarepmeT gnikroWtnioP porDliO esaBnoitartenePIGLNtcudorP

    GRASAS CALCIO COMPLEJO / CALCIUM COMPLEX GREASES

    siliG.A.BESSIL range are cone greases with different thickening agent, for a wide extreme range of temperatures, very high and/or very low. Water resistant

    GRASAS DE SILICONA / SILICONE GREASE

    Producto NLGI Penetracin Espesante Punto Gota Temperatura de trabajo ObservacionesProduct NLGI Penetration Thixckener Drop Point Working Temperature Remarks

    G BESSI 20 2/3 250/280 Inorgnico/Inorganic

    Inorgnico/Inorganic

    >300C

    >300C -45/180C

    -50/180C

    Uso Alimenticio/G BESSI 25 2/32/3

    250/280220/240

    Inorgnico/Inorganic >300C -50/180C Food Grade

    2 2 265/295 Jabn Li/Li Soap >205C -40/200C

    Grasa especial para lubricacin contactos metal con plastico, elastmeros y caucho.Special grease for metal contact with plastic, elastomer and rubber lubrications.

    VARIOS / MISCELANEOUS

    Producto NLGI Penetracin Aceite Base Espesante Punto Gota Temperatura de trabajoerutarepmeT gnikroWtnioP porDrenekcxihTliO esaBnoitartenePIGLNtcudorP

    G P EX 20 200/0 0 355/385 Mineral 240C -25/150C

    G P EX 20 200/1 1 310/340 Mineral 250C -25/150C

    G P EX 20 200/1 2 1/2 290/310 Mineral 250C -25/150C

    G P EX 20 200/2 2 265/295 Mineral 250C -25/150C

    G N 782 00 400/430 Mineral Jabn Li/Li soap 170C -25/120C

    Grasa de Litio especial para cosechadoras de algodn tipo I.H - Cumple la norma John Deere CO OR VERDE.Special Lithium grease for cotton harvesters Machines I.H Type - Lubrication meets John Deere standard GREEN CO OR.

    G BESMO Y SR 1/2 270/310 Mineral Jabn Li/Li soap 180C -35/135C

    C S2 Grasa especial para la lubricacin de juntas homocinticas (tipo bolas). Compatible con gomas y elastmeros.W M S2 Special grease for CV joints lubrication (Ball type) Compatible with rubber and elastomers.

    G VI M 00/ 00/000 425/455 Mineral Jabn Li/Li soap N.A -30/120C

    Especial para de ferrocarriles, Vias y pestaas de ruedas. Alto contenido en grafito. Special for Railways. Rail-profile and Wheels flange lubrication. High graphite content .

    G VI S M 2/G 2 265/295 Mineral Jabn Ca/Ca Soap 135C -20/90C

    Contiene slidos lubricantes.Especial para la lubricacin de cables de acero, as como mecanismos deslizantes, en ferrocarriles.Contain lubricant solids. Special grease for wire rope and any sliding mechanisms in Railways.

    La Gama G.A. BESSIL son Grasas de Silicona, con diversos espesantes, para temperaturas de trabajo extremas, muy altasy/o muy bajas. Resistentes al agua.

    M Y M 2 265/295 Mineral Jabon Li/Li soap > 180C -20/135C

    G 2 1/2 290/310 -10/150C

    2 265/295 -25/150CG X

    Mineral >250CMineral >250C

  • Incluimos a continuacin una gama de productos con alto contenido en slidos, empleados bsicamente como r , para aquellas condiciones de trabajo tan especiales que no permiten el uso de lubricantes convencionales

    (aceites o grasas).

    We include a range of products with high content in solid lubricants, basically used as a z a l r ca s for a sospecial working conditions that it does not permit to use a conventional lubricants (oil or grease).

    PASTAS DE MONTAJE / ASSEMBLY PASTES

    Producto Penetracin Aceite Base Color Temperatura de trabajo SolidosProduct Penetration Base Oil Colour Working Temperature Solids

    Producto NLGI Penetracin Aceite Bas Punto Gota Temperatura de trabajoProduct NLGI Penetration Base Oil Drop Point Working Temperature

    G 8 N.A. (>500) Mineral Cobrizo/Copperish Hasta/Till 1100CGrafito y Polvo CuG 260/290 Mineral Cobrizo/Copperish Hasta/Till 1100C Graphite & Cu powder

    Grafito y Polvo CuGraphite & Cu powder

    O 310/340 Mineral oil+LiSoap Black-greyish -20 /450C 60% MoS2

    Viscosmetro Rotacional/Roto-viscosimeter

    1 310/340 Mineral >185C -20C/150C C

  • GRASAS BESLUXBESLUX GREASES

    Gama de grasas complejas de Aluminio, basadas en aceite mineral, que se caracterizan por su gran bombeabilidad yexcelente comportamiento frente a la temperatura.

    Grasas de excelente capacidad anticorrosivo, muy resistente al agua y a altas cargas. Estabilidad al trabajo mecnico.

    Range of Aluminium complex greases, mineral oil based, main characteristic is: high pumpability and outstanding

    Excellent anticorrosive capacity, high water resistance, very high load capacity and high mechanical working stability.

    behaviour against temperature.

    GRASAS COMPLEJAS DE ALUMINO / ALUMINIUM COMPLEX GREASES

    GRASAS SULFONATO DE CALCIO / CALCIUM SULPHONATE GREASES

    G S X 000 445/475 Mineral N.A.

    N.A.

    -40/100C

    G S X 00 400/430 Mineral -20/150C

    Grasas extra fluidas para lubricacin por bao (carter cerrado) y circulacin, en circuito cerrado.Extra fluid greases for bath (gea r-box) and closed circuit.

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo ObservacionesProduct NLGI Penetration Base Oil Drop Point Working Temperature Remarks

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo Carga SoldaduraProduct NLGI Penetration Base Oil Drop Point Working Temperature Welding Load

    X M 1 310/340 Mineral 230C -20/150C

    G S X C / 2 265/295 Mineral 250C -10/160C Azul Metlico/Metalic Blue

    G X / 1 310/340 Mineral 240C -10/160 (180)

    (180)

    C Azul Oscuro/Dark Blue

    G X 2/ 2 265/295 Mineral 250C -10/160C Azul Oscuro/Dark Blue

    Grasas formuladas con aceites minerales de muy alta viscosidad Muy filantes.Greases formulated wih Extra-High viscosity mineral.oil. Extra Tacky.

    Gama de grasas complejas de Bario que se caracterizan por su gran resistencia al agua y a los agentes qumicos, su grancapacidad de soporte de carga y excelente comportamiento frente a las altas temperaturas.

    Range of Barium complex greases which main characteristic is its high water and chemical agents resistance, its highload carrying capacity and outstanding behaviour to high temperature.

    GRASAS COMPLEJAS DE BARIO / BARIUM COMPLEX GREASES

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo ObservacionesProduct NLGI Penetration Base Oil Drop Point Working Temperature Remarks

    G S X 2 2 265/290 Mineral 220C -15/150C Altas Cargas/High Loads

    G S X 2/1 290/310 Mineral 220C -15/150C

    G S X 2 265/285 Mineral 220C -15/150C

    G S X 2 2/1 280/310 Mineral 220C -15/150C Blanca/White

    G S X 2 265/290 Mineral 220C -15/150 (170)C Adherente/Adherent

    X /S 2 265/295 Sinttico 220C -50/150C

    Especial para rodamientos de agujas y otros mecanismos a muy alta velocidad. Factor Velocidad (Dn)= 10 .Special for needle bearings and other mechanisms working at very high speed. Speed factor (Dn)=10

    6

    6

    .

    G BES UX SU P EX M 2/P US

    X

    G BES UX SU P EX H-1/2P US

    X O 00

    G BES UX P EX BAR EH 1/2 G

    G S X X B / G

    2 265/295 Mineral >270C -15/160C >600

    2 265/295 Mineral >270C -15/160C >700

    1/2 280/310 Mineral >270C -15/160C >700

    00 400/430 Mineral >270C -15/160C >500

    1/2 290/310 Semisinttico 220C -15/150C

    1/2 290/310 Semisinttico 220C -15/150C

    Altas Cargas/High Loads

    Alta Velocidad/High Speed

    Altas Cargas/High Loads

    Lub Slidos/ Solid Lub

    Lub Slidos/ Solid Lub

  • Gama de Grasas complejas de litio con gran estabilidad mecnica y trmica. Para ser usadas en rodamientossobrecargados y que trabajen a altas temperaturas.

    Lithium Complex greases range with high mechanical and thermal stability. To be used on very heavy loaded bearings andworking at high temperature.

    GRASAS COMPLEJAS DE LITIO / LITHIUM COMPLEX GREASES

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo ObservacionesProduct NLGI Penetration Base Oil Drop Point Working Temperature Remarks

    S X X 2 2 265/295 Mineral 240C -10/150C

    S X X 2/G 2 265/295 Mineral 260C -20/150C con grafito/with graphite

    S X X 2 265/295 Mineral 240C -15/150C

    S X X /G 1 310/340 Mineral 240C -15/150C con grafito/with graphite

    S X X /G 2 265/295 Mineral 240C -15/150C con grafito/with graphite

    S X 2 1/2 290/320 Sinttico/Synthetic 250C -40/180C Alta Viscosidad/High Viscosity

    S X 2 1/2 290/320 Sinttico/Synthetic 250C -40/180C

    G S UX 2 2 265/295 Sinttico/Synthetic 250C -30/18

    (170)

    0C Altas Temp./High Temp.

    G S UX 2 265/295 Sinttico/Synthetic 240C -55/150C Alta Velocidad/High Speed

    Gama de Grasas complejas de sodio, de altas prestaciones, basadas en aceite mineral, adherentes y fibrosas (de fibralarga), para mecanismos sometidos a altas velocidades y fuertes cargas. Contiene Bisulfuro de molibdeno, lo que leconfiere propiedades de lubricacin de emergencia.

    High performance sodium complex greases, mineral oil based, adherents and fibrous (long fibres), for mechanismsoperating at high speed and heavy loads. Contains Molibdenum Bisulphide, providing emergency lubrication properties.

    GRASAS COMPLEJAS DE SODIO / SODIUM COMPLEX GREASES

    senoicavresbOojabart ed arutarepmeTatoG otnuPesaB etiecAnicartenePIGLNotcudorPskrameRerutarepmeT gnikroWtnioP porDliO esaBnoitartenePIGLNtcudorP

    G BES UX P EX NA M 2 BM 2 265/295 Mineral 240C -10/150C MoS2 (MOLY)

    Especial para lubricacin de motores elctricos y ventiladores.Special for electric motors and fans lubrication.

    G BES UX P EX NA H 3/BM 3 220/250 Mineral 230C -10/160C MoS2 (MOLY)

    Especialmente formuladas para lubricacin de grifos y vlvulas de gas. C t B s lf M l b ( S2)Specially intended for gas taps and valves lubrication. C a s M l s l ("MO Y") ( M S2)

    G S U X 2

    X X 2 G

    G BES UX IP EX 1/2 STF

    G BES UX P EX H 2 VT

    G BE UX P EX M BM

    2 265/295 Mineral >220C -20/150C

    2 265/295 Mineral >240C -15/150C

    2 265/295 Mineral >240C -10/150C

    2 265/295 Mineral >240C -20/150C

    1/2 290/320 Sinttico/Synthetic>250C -40/180C

    Hom.KOMATSU/KOMATSU app

    Altas Cargas/High Loads

    Altas Cargas/High LoadsAltas Temp./HighTemp.

    PTFE

  • GRASAS DE POLIUREA / POLIUREA GREASES

    Grasas de altas prestaciones y larga vida, para trabajar con altas temperaturas altas cargas y en presencia de agua.

    High performace greases, long life, intended ror working with high temperatures, loads and with water.

    Remarks

    Semi-Synthetic

    erutarepmeT gnikroWtnioP porDliO esaBnoitartenePIGLNtcudorP

    G S X M 0 355/385 Mineral >220C -20/150C

    G S X M 1 310/340 Mineral >220C -20/150C

    G S X M 2 1/2 290/310 Mineral >220C -20/150C

    G S X M 2 2 265/295 Mineral >220C -20/150C

    G BES UX KO P EX H / 1/2 300/320 >270C -20/150C

    S X O X 0/1 340/360 Sinttico/Synthetic >250C -50/180C color Azul/ colorBlue

    colorBlueS X O X 2 255/295 Sinttico/Synthetic >250C -50/180C color Azul/

    G BES UX KO P EX H 00 1/2 290/310 S

    Semi-Sinttico

    inttico/Synthetic >220C -15/135C

    S X KO X 2 2 265/295 Sinttico/Synthetic >250C -20/20 (220)0C

    G S UX O X M 2 1/2 280/320 Sinttico/Synthetic 270C -40/180C PTFE

    Cumple la norma e h DT G0 7 T p BMeets D 0

    GRASAS INORGANICAS / INORGANIC GREASES

    Gama de grasas inorgnicas para aplicacin a altas temperaturas. Carecen de punto de gota, por lo que nunca se funden,por esto se las llama tambien "grasas infusibles".

    Inorganic greases range for high temperature application. They have not dropping point, that means never melts. They arealso called "non melting" greases.

    GRASAS SIN JABON METALICO / GREASES WITHOUT METALIC SOAP

    Grasas especiales formuladas sin jabn metlico, para trabajar a altas temperaturas. Se dividen en dos grandes grupos: c r .

    Special greases formulated without metalic soap, for working at high temperatures. Can be divided in two different groups:c r s o .

    Producto NLGI Penetracin Aceite Base Temperatura de trabajo Lubricantes SolidosProduct NLGI Penetration Base Oil Working Temperature Solid Lubricants

    S X 2 275/295 Sinttico/Synthetic -35/20 (220)

    (220)

    0C MoS2 (MOLY)

    X 2 275/295 Sinttico/Synthetic -35/200C MoS2 (MOLY)

    (180)

    2 265/295 Mineral >220C -10/150CG B KO P EX H 2/BS

    G B X KO X 2

    G S U

    G.BESLUX KOMPLEX DPH LT-2

    2 265/295 Sinttico/Synthetic -20C/230C Si

    2 265/295 Sinttico/Synthetic -45C/180C No

    1 310/340 Semisinttico/Semi-Synthetic -45C/180C No

    Producto

    Producto

    ProductNLGI Penetracin Aceite Base Temperatura Trabajo Lub. Slido

    NLGI Penetracin Aceite Base Punto Gota T Observacionesemperatura Trabajo

    NLGI Penetration Base Oil Working Temperature Solid Lub.

    Product

    G S 2

    X K X

    2 265/295 Sinttico/Synthetic -40C/200C PTFE

    1 310/340 Semisinttico/ Semi-Synthetic >250C -20C/160C

    Grasa de base sinttica con alto contenidos en PTFE, con excelentes propiedades antioxidante, antidesgaste y anticorrosivo. Color verde. Synthetic based grease with high content of PTFE, excellent properties: antioxidant, antiwear and anticorrosion.Green color.

    Grasa especial para rodamientos de colada continua de acero. Special grease for steel continuos casting.

    NLGI Penetracin Aceite Base Punto Gota Temperatura TrabajoNLGI Penetration Base Oil Drop Point Working Temperature

    Producto

  • GRASAS DE SILICONA PARA RODAMIENTOS / SILICONE GREASES FOR BEARINGS

    GRASAS DE SILICONA / SILICONE GREASES

    Gama de grasas de silicona, con distintos espesantes, de alta estabilidad qumica y trmica para trabajar en un ampliorango de temperaturas, tanto muy bajas como muy elevadas.

    Range of Silicone greases with different thickeners, high thermal and mechanical stability, to operate in a widerange of working temperatures, from very low to very high temperatures.

    Producto NLGI Penetracin Espesante Puntos Gota Temperatura de trabajo ObservacionesProduct NLGI Penetration Thickener Drop Point Working Temperature Remarks

    G BES UX BESSI 2 2 265/295 Jabn Li/Li Soap 2> 00C -73/180C Marfil/Ivory

    S X SS 2 2 265/295 Li Complex >250C -40/220C Marrn/Brown

    S X SS 2/ 1/2 280/310 Li Complex >250C -50/250C MoS2 (MOLY)

    GRASAS INORGANICAS DE SILICONA, PARA GRIFERIA, NSF H1, APROBADAS POR WCRSSILICONE INORGANIC GREASES FOR TAP WATER LUBRICATION, NSF H1, APPROVED BY WCRS

    ojabart ed arutarepmeTetnasepsEnicartenePIGLNotcudorPerutarepmeT gnikroWrenekcihTnoitartenePIGLNtcudorP

    G S X SS 000 445/475

    400/430

    310/340

    210/220

    PTFE -50/180C

    G S X SS 00 PTFE+Silica -45/180C

    G S X SS 1 Silica -40/200C

    G S X SS 3 PTFE+Silica -35/200C

    Grasas infusibles (sin punto de gota) basadas en . Excelente comportamiento a altastemperaturas y cargas elevadas. Resistentes a agentes qumicos, cidos y lcalis, agua y vapor. Para la lubricacin derodamientos de ruedas de transportadores y vagonetas de hornos, mecanismos expuestos al Oxigeno y/o en contacto concidos, lcalis, disolventes, gasoleos, fuel-oils, etc. Muy larga vida en condiciones de trabajo muy agresivas.

    Non melting greases (not melting point) based on r r s . Excellent behaviour to hightemperatures and heavy loads. Resistant to chemical agents, acids and alkalis, water and vapour. Lubrication of thebearings of the wheels in conveyors and furnace wagons, mechanisms in contact with oxygen, acids, alkalis, solvents, gas-oil, fuel-oil, etc. Long life in extreme aggressive working conditions.

    GRASAS PERFLUORADAS / PERFLUORINATED GREASES

    ojabart ed arutarepmeTatoG ed otnuPetnasepsEnicartenePIGLNotcudorPerutarepmeT gnikroWtnioP porDrenekcihTnoitartenePIGLNtcudorP

    S X O 1 310/340 PTFE N.A. -37/260C

    S X O 2 2 265/295 PTFE N.A. -25/260C

    S X O 2 2/3 245/265 PTFE N.A. -25/260C

    S X OR 3 220/250 PTFE N.A. -25/260C

    Especial para lubricar cadenas en instalaciones de Cataforesis.Special for Chains lubrication in Cataphoresis Plants.

    G BES UX F UOR HT 2 2 265/295 Silica N.A. -25/2

    (280)

    (280)

    (280)

    (280)

    (300)80C

    Producto

    UX S S

    Product NLGI Penetracin Aceite Base Punto Gota Temperatura de Trabajo Observaciones

    1 310/340 Silicona >300C -50/250C Contiene PTFE

    NLGI Penetration Base Oil Drop Point Working Temperature Remarks

  • Grasas fabricadas con de alta capacidad lubricante y que dan un valor del 80% o superior, en el test debio-degradabilidad 33 93.

    Greases manufactured with , high lubrication capacity and a value of 80% or higher on thebiodegradability test .

    GRASAS BIODEGRADABLES / BIODEGRADABLE GREASES

    G S X O 1 310/340 Jabn de Li /li Soap Ester Nat. -30/80C con grafito/with graphite

    con grafito/with graphite

    senoicavresbOojabart ed arutarepmeTAceite baseetnasepsEnicartenePIGLNotcudorPskrameRerutarepmeT gnikroWBase OilrenekcihTnoitartenePIGLNtcudorP

    GRASAS BESLUX PARA LA INDUSTRIA ALIMENTICIA / BESLUX GREASES FOR FOOD INDUSTRY

    Gama de grasas blancas alimenticias, especialmente formuladas para su uso en ind. alimenticias y farmaceuticas, en puntoscon riesgo de contacto accidental con los productos elaborados (alimentos, bebidas, medicamentos, etc) o sus envases.Estn en la lista de lubricantes aprobados por el NS como S .PARA MAS INFORMACIN SOLICITE NUESTRO CATALOGO "LUBRICANTES ESPECIALES PARA LA IND. ALIMENTICIA".

    Range of Food grade White greases, for Food and Drugs industry intended to be used wherever is risk of incidental contactbetween the elaborated products (food, drinks, drugs, etc) or its packages.Included on the S list of approved lubricants as .FOR MORE INFORMATION, ASK FOR OUR LEAFLET "SPECIAL LUBRICANTS FOR FOOD INDUSTRY".

    GR. BESLUX PARA USOS Y APLICACIONES ESPECIALES / BESLUX GR. FOR SPECIAL USE AND APPLICATION

    ojabart ed arutarepmeTatoG sotnuPetnasepsEesaB etiecAnicartenePIGLNotcudorPerutarepmeT gnikroWtnioP porDrenekcihTliO esaBnoitartenePIGLNtcudorP

    G S X 00 400/430 Aceite Blanco Al-Complejo 200C -20/130C

    G S X 0 355/385 White Oil Al-Complex 220C -20/130C

    G S X 1 310/340 Aceite Blanco Al-Complejo 240C -20/130C

    G S X 2 2 265/295 White Oil Al-Complex 250C -20/130

    (150)

    (150)

    (150)

    C

    Grasas de uso general para rodamientos y mecanismos trabajando en condiciones normales.General purpose greases for bearings and mechanisms working at normal conditions.

    X X / 2 250/280 Sinttico/Synthetic Inorgnico/Inorganic N.A. -40/180C (200)

    Con PTFE/With PTFE

    X X 2 265/295 Semi-Sinttico Al-Complejo 250C -20/150CSemi-Synthetic Al-Complex

    Grasa grado alimenticio para mecanismos sometidos a cargas extremas. P t b c t s .Special food grade grease for mechanisms under extremely heavy loads . o c .

    G X X /3 2/3 250/280 Sinttico/Synthetic Al-Complejo 250C -40/180C

    G X X / 1/2 290/310 Sinttico/Synthetic Al-Complex 240C -40/180C

    G S X X 2 265/295 Sinttico/Synthetic Jabn Ca/Ca Soap >130C -70/100C

    Grasa especial para muy bajas temperatures Lubricacin general de tneles de congelacin.Special grease for very low temperatures lubrication. General lubrication of freezing lines.

    X D G 2 265/295 Ac. Blanco/White Oil Inorgnico/Inorganic N.A. -15/120C

    Grasa infusible para lubricacin de rodamientos y uso general. Color blanco.Non melting grease for bearings lubrication and general use. Whitish Colour.

    G BES UX BIOGRE SE M 2 HT 2 265/295 Jabn Li/Li Soap Ester Nat.

    Ester Nat.

    Ester Nat.

    Sint.

    Sint.

    -30C/80C con grafito/

    -25C/80C con grafito/

    -25/120C

    G X O 0 00 400/430 Jabn Li/Li Soap Ester Nat. -20/120C

    G BESLUX BIOGREASE M-000/G

    X S 0

    G BES UX BIOR IL M 000

    G L X

    000 445/475 Inorgnico/Inorganic with graphite

    000 445/475 Inorgnico/Inorganic with graphite

    000 400/500 Inorgnico/Inorganic -30C/180C con grafito/with graphite

    000 445/475 Jabn Li/Li Soap -40C/80C sin slidos/without solid

    X X 0

    G BES UX C P EX M 000 ATOX

    G BES UX PRESS I SX

    00 400/430 Sinttico/Synthetic Al-Complejo/Al-Complex >220C -50/120C

    000 445/475 Semisint./Semi-Synth. Complejo/Complex ND -20/130C

    2/1 290/320 Sinttico/Synthetic Sulfonato Ca/Ca Sulphonate >270C -30/180C

  • GRASAS "BESLUX CROWN" PARA ENGRANAJES ABIERTOS / "BESLUX CROWN" GREASES FOR OPEN GEARS

    "G. BESLUX CROWN" es una gama de productos especialmente formulados para la lubricacin de engranajes abiertos ycoronas dentadas, en la industria del cemento, siderurgia, minera y qumicas en general. Son una gama de grasasalumnico-complejas con alto contenido en grafito de alta calidad. Las distintas grasas que componen esta linea cubrentanto la lubricacin por pulverizacin como por circulacin o bao. La linea comprende los siguientes productos:

    "G. BESLUX CROWN" is a range of products specially formulated for open gear and crown's lubrication, on cementindustry, steel industry, mining and chemicals. The different products of this range are Aluminium complex greases withhigh qualituy graphite high content. The different products of this range can be used on spray lubrication systems andon circulation or deeping lubrication systems. The Line includes the following products:

    NOICARAPERN/OICAMIRPMI.CALUCRIC o OABNOICAZIREVLUPotcudorP.LUCRIC ro GNIPEED.BUL YARPStcudorP LUB MANUAL

    Rodaje Servicio Rodaje Servicio PRIMING/ REPARINGRunning-in Service Running-in Service MANUAL LUB

    S X XX X XXX

    G BE UX CROWN H 0 XX S X XX X XX

    G BE UX CROWN H 500 P U XX S X XX X XXXXX

    G BES UX CROWN M F UID X XX S X U U X XX X U XX

    G BES UX CROWN RPR XXXXX

    XXX

    XX=Muy adecuado/Very suitable X=Tambin adecuado/Also suitable

    PARA INFORMACIN MAS DETALLADA. SOLICITE NUESTRO CATALOGO " BESLUXCROWN, LUBRICANTES PARA ENGRANAJES ABIERTOS.FOR MORE INFORMATION, ASK FOR OUR LEAFLET "BESLUX CROWN,LUBRICANTS FOR OPEN GEARS"

    S X Y SG X W VY G BES UX CROWN WHITE EH 2

  • GRASAS BESLUX SEGUN NORMAS / BESLUX GREASES ACCORDING TO STANDARDS

    Detallamos a continuacin una serie de grasas fabricadas segn las normas de fabricantes de vehculos y componentes.Son productos aprobados para unas aplicaciones especficas de cada fabricante, segn una norma en concreto..

    Here you will find a range of greases manufactured as per cars and car-parts manufacturers. There are approvedproducts for specific applications, under specific standards.

    ojabart ed arutarepmeTatoG sotnuPetnasepsEesaB etiecAnicartenePIGLNotcudorPerutarepmeT gnikroWtnioP porDrenekcihTliO esaBnoitartenePIGLNtcudorP

    G S X 3 2 265/295 Sinttico Jabn Li 190C -55/140CSynthetic Li Soap

    Grasa especial para trabajar a muy bajas temperaturas. Cumple la n m 3 .Special grease, intended for working at very low temperatures. As C d 000.

    G S X 735 2 265/295 Semi-Sinttico Jabn Li >180C -40/125CSemi-Synthetic Li Soap

    Grasa especial con aditivos anti-oxidantes, anti-corrosivos y E.P, para trabajar a bajas temperaturas.Cumple la m V SW G 5.Special grease with Anti-corrosives, anti-oxidants and E.P. additives, for low temperatures working.

    S G V r .

    G S X 1/2 300/320 Semi-Sinttico Jabn Ca >135C -50/100CSemi-Synthetic Ca Soap

    Grasa especialmente formulada para la lubricacin de cerraduras, articulaciones y pequeos mecanismos, en un ampliorango de temperaturas de trabajo, de -50C hasta 100 C Cumple la K G V .Speciality grease intended for the lubrication of locks, joints and, small mechanisms, in a wide range of operatingtemperatures from - 50 to 100 C. Meets G s r .

    G BES UX FRIP EX 2 265/295 Sinttico Jabn Li 180C -70/130CSynthetic Li Soap

    Cumple la norma MI G 8 7B Cdi NATO G 5 .Meets standard MI 2 8 7B NAT G 54.

    G S X X 8 2 265/295 Sinttico Jabn Li 180C -55/150C

    Grasa de alto rendimiento formulada par lubricar mecanismos operando en una amplia gama de temperaturas. Lubricacinde larga duracin - Cumple las ma 778/ N M 0 N 2 ( N .High efficiency grease intended for mechanisms operated in a wide range of Temperatures. Long life lubrication - Meets

    778/A a NES M 5009 T N T 2 (NISSAN)V K WA EN T W

    G BES UX P EX 778 /B 1/2 280/310 Sinttico Jabn Li 180C -55/150CSynthetic Li Soap

    Variante de la G. BESLUX PLEX 778/A, con Bisulfuro de Molibdeno. A bad NISS N 30503 Y 9500.Same as G. BESLUX PLEX 778/A, containing Molibdenum bisulfide. A NISS N 30503 Y 9500.

    X X / 00

    Lubricante sinttico extra fluido,basado en la G. BESLUX PLEX 778/A. Especialmente formulado para la imprimacin con el lubricante en los cojinetes sinterizados, tanto de acero como de bronce.Synthetic Extra Fluid lubricant, based on G. BESLUX PLEX 778 A. It is intended for the priming lubrication of sintered bearing eitherbronze or steel.

    Caractersticas/Characteristics:

    Penetracin a -50C/Penetration at -50 : >280 Viscosidad Dinmica a 25C/Dinamic Viscosity at 25 C : 300 -450 mP.sTemperatura de Trabajo/Working Temperature : -50/180C

    G BES UX P EX RT 2 2 265/295 Semi-Sinttico Jabn Li >180C -40/100CSemi-Synthetic Li Soap

    Grasa especial para bajas temperaturas. Especialmente Indicada para lubricacin de componentes de automvil.C mpl l n m ROBERT BOSCH FT 1013 KV E0010Special grease for low temperatures. Specially intended for Car parts lubrication.M s

    M

    ROBERT BOSH s a a FT 1013 KV E0010

    S X 2 265/295 Sinttico/

    Grasa especial para lubricacin de contactos metal-plstico. Direcciones elctricas automvil. Homologado por DELPHI-TRW.

    Synthetic

    Special grease for lubrication of metal plastic contacts. Car electrical steering. Approved for DELPHI-TRW.

    Jabon Li/ Li Soap min 193C -55/150C

  • ojabart ed arutarepmeTatoG sotnuPetnasepsEesaB etiecAnicartenePIGLNotcudorPerutarepmeT gnikroWtnioP porDrenekcihTliO esaBnoitartenePIGLNtcudorP

    S X X 1 310/340 Mineral Jabn Li/Li Soap 180C -15/130 (300)C

    Con O 2 ( O Y). Grasa especial, con bisulfuro de molibdeno para lubricar mecanismos sometidos a muy fuertes cargas,esfuerzos de choque y vibraciones, como los que pueden darse en los acoplamientos tipo MAINA.With 2 ( O . Special grease with Molibdenum bisulphide intended for lubrication of mechanisms under heavy loads, shockefforts and vibrations, like can be found on MAINA type couplings.

    G S X CON C /S 3 220/250 Synthetic Li Soap 180C -65/130C

    Grasas especiales de alta estabilidad qumica y trmica, formuladas para la lubricacin y proteccin de contactos elctricos.Excelente proteccin anti-corrosiva.Special grease with high chemical and thermal stability synthetic oil, intended for lubrication and protection of electrical contacts.Outstanding anticorrosion protection.

    G S X G 3 2/3 250/280 Mineral Inorganico/Inorganic N.A. -20/140C

    Grasa especial formulada con aceites de alta estabilidad trmica y qumica para la lubricacin decontactos elctricos. ALTO CONTENIDO EN SLIDOS CONDUCTORES.Special grease with high chemical and thermal stability synthetic oil, intended for lubrication of electric contacts. HIGH CONTENT IN

    CONDUCTORS SOLIDS. .

    S X G 12. Especial para lubricacin de reductores.

    ecial, muy fluida, con b m para lubricacin y mantenimiento de cables de acero.Special very fluid grease with b sulp d , intended for lubrication and maintenance of

    Fluid grease of high load capacity FZG >12. Specially intended for gear and coupling systems.

    Wire Ropes.

    G BES UX E G 163 1/2 290/310 Semi-Sinttico Jabn Li >250C -40/150CSemi-Synthetic Li Soap

    Grasa especial para amplio rango de temperaturas de trabajo. Especialmente pensada para lubricar amortiguadores de lavadoras y componentes del automvil, frenos de mano, etc.Special grease for wide range of working temperatures. Specially intended for Washing machines Shock absorbers lubrication car components, hand brakes, ....

    G 0 00/000 430/465 Mineral Jabon Li/Li Soap ND -10/100C

    Producto NLGI Penetracin Aceite Base Punto Gota Temperatura de trabajo Carga SoldaduraProduct NLGI Penetration Base Oil Drop Point Working Temperature Welding Load

    G BES UX CAP EX EH 2 2 265/295 Mineral 250C -15/150C 450Kgf

    VARIOS / MISCELANEOUS

  • Las pastas de la gama BESLUX son una serie de productos con un alto contenido en slidos de muy alta calidad. Seemplean principalmente como pastas anti-agarrotantes y tambin como lubricante seco para aquellos mecanismos ycondiciones de trabajo que as lo requieran.

    The Beslux pastes are a range of produts with a high content on very high quality lubricating solids. They are used as anti-seize pastes and solid lubricants for those kind of mechanism and working conditions where may be required .

    PASTAS BESLUX / BESLUX PASTES

    sodiloSojabart ed arutarepmeTroloCnicartenePotcudorPsdiloSerutarepmeT gnikroWruoloCnoitartenePtcudorP

    G S X S 220/250 Blanco/White hasta/till 250C Solidos blancos especialesSpecial white solids

    G S X S U S 180/220 Negro/Black hasta/till 450C Solid Lubricant

    G X N P 2 265/295 Cobrizo Oscuro/Dark Copper hasta/till 1100C Polvo CU/Cu Powder

    Este producto (NLGI-2) cumple la norma O C 9 0 .This product (NLGI-2) pass the FORD s a a d SAM 7 .

    G BES UX TRIBOP TE / 235/265 Blanco/White -40/150C(400C) Especiales anti tribo-corrosionSpecials Anti Tribo-corrosion

    G BES UX GR FO P TE 310/340 Gris metlico/Metalic Gray -15/1180 Grafito+Al Polvo/Graphite+Al Powder

    G BES UX GR FO HT 4500/6000cPs Gris Oscuro/Dark Gray hasta/till 200C Grafito/Graphite)C054 aces .bul().csiV dleifkoorB(

    G BES UX GR FO HT P STE 300/330 Gris metlico/Metalic Gray hasta/till 200C Grafito/Graphite(dry lub. 450C)

    G BES UX NTI SEIZE PASTE 1 310/340 Cobrizo Oscuro/Dark Copper hasta/till 1100C Polvo CU/Cu Powder

    B S UX O X S 2 S

    G BES UX SINC RT PASTE 1

    B S UX C 5 S

    G S

    G BES UX TOP P STE

    300/320 Amarillo/Yellow -40/200C Slidos blancos/White solids

    310/340 Blanco/White -40/150C Slidos blancos/White solids

    290/320 Gris metlico/Metalic Gray -25/140C Slidos metlicos/ Metallic solids

    290/320 Cobrizo oscuro/Dark Copper -15/160C Slidos metlicos/Metallic solids

    290/310 Blanco/White -40/200C Slidos cermicos/Ceramic solids

  • Son muchas las variables a tener en cuanta a la hora de

    seleccionar una grasa lubricante. Podemos definir una grasa

    como una mezcla homognea y estable de tres componentes,

    el "aceite base", el "espesante", un paquete de"aditivos".

    La funcin lubricante recae en el aceite base. El espesante

    cumple una funcin portadora del aceite (a modo de esponja)

    y en algunos casos tambin acta reforzando las propiedades

    lubricantes de la grasa.

    Los aditivos utilizados optimizan el comportamiento general

    de la grasa, mejorando algunas de sus propiedades

    Los propiedades ms importantes de una grasa, que deben

    ser tenidas en cuenta a la hora de seleccionar el producto

    adecuado para una determinada aplicacin, son:

    PUNTO DE GOTA

    Es la temperatura a la que la grasa pasa de estado semi-

    slido a lquido. Depende bsicamente del espesante

    empleado.

    CONSISTENCI

    Nos da una idea de la dureza de la grasa y depende,

    bsicamente, de la cantidad de espesante.

    En otro apartado de este catlogo se expone como se mide la

    dureza (consistencia y penetracin) de una grasa

    PROPIEDADES NTIDESGASTE (AW ) Y EXTREMA

    PRESION (E P )

    Dos superficies en contacto "lmite" y en movimiento relativo

    estn sometidas a un rozamiento que produce un desgaste de

    las mismas. El ensayo de desgaste nos da idea (cualitativa)

    de la capacidad del lubricante de reducir este desgaste. Esto

    se logra con los aditivos "anti-Desgaste"

    Many variables must be taken into consideration to select a

    lubricating grease.We must define a grease as an

    homogeneous and stable mixture of three components; the

    "base oil", the thickener and a "additives" package.

    The .lubricating action is a mater of base oil. The thickener

    acts as a "carrier" of the base oil (like an sponge) and some

    times acts, also, reinforcing the lubricating properties of the

    base oils.

    The base additives used will optimise the general behaviour

    of the lubricating grease, improving some of its properties.

    The most important properties of a grease, to be consideret

    when select the most suitable product for an specific

    application are:

    DROP POINT

    Is a temperature at the grease pass from the semi solid state

    to a liquid. It basically depend of the used thickener.

    CONSISTENCY

    Give an idea about the hardness of the grease and basically

    depends of the quantity of thickener.

    In and other part of this cataloge we explain how to measure

    the hardness (Consistency and Penetration) of a grease.

    NTI WEAR ( W) ND EXTREME PRESURE (E P )

    PROPERTIES

    Two surfaces in a "limit" contact and relative movement have

    some "wear" which affects its surfaces. The "wear" test give as

    an idea (qualitative) about the capacity of lubricant to reduce

    this wear. This is obtained using "Anti Wear Additives".

    CRITERIOS GENERALES PARA LA SELECCIN DEGRASAS LUBRICANTES

    GENERAL LINES TO PROCEEDTO THE SELECTION OFLUBRICATIONG GREASES

    N Y S S P D GR C N STHE MO T IMPORTANT TEST F R UBRI TIN REA E

    Punto de Gota / Drop Point ASTM D-566 Consistencia/Penetracin / Consistency/Penetration ASTM D-217 Estabilidad a la oxidacin / Oxidation stability ASTM D-942 Perdida por evaporacin / Evaporation loss ASTM D-972 Ensayo lavado por agua / Water washout test ASTM D-1264 Proteccin anticorrosivo / Rust preventive capacity DIN 51806 Caractersticas antidesgaste / Anti-wear characteristics(Mtodo 4 bolas / Four ball test 6622-D MTSA)

    Corrosin al cobre / Copper strip corrosion ASTM D-4048 Propiedades extrema presin / Extreme pressure properties(Carga de soldadura / Welding load 932-PI)

    Estabilidad al almacenamiento / Storage stability IP-121 Prdida de aceite a alta temperatura / Oil loss at high temperature FSTM 791.321.2 Presin de fluidez / Fluidity pressure DIN 51805

  • GARO AS A

    Camino de la Riera, 36-44(Polgono Cova Solera)

    08191 RUBI (Barcelona) SPAIN

    Telfono: +34 935 883 100EXPORTSPAIN

    Fax: +34 936 976 334

    Internet: http://www.brugarolas.com

    e-mail: [email protected]

    Telfono: 935 883 100Fax: 935 883 101e-mail: [email protected]

    K V GZ.I. La Gare-B. P. 3126260 St. DONAT (FRANCE)[email protected]

    R GA O AS A A SC. so Filippo Turati, 11/C10128 TORINO (ITALIA)[email protected]

    R N A V S AN R U O A OV H WON AN IBUI O S N O O L M N O

    EDIC

    ION

    2 - E

    NERO

    /201

    1