testa presentation

“Company

S.p.a.”

The importance of the last step:

the inspection of the fabric,

the packing of the roll and the quality

Via Crema,8\C – 24050 Zanica (Bg) Italy -Tel. +39 035-670.444

Fax +39 035-670.450 – E mail:info@testa.it – www.testaspa.it

Testa Spa has been

UNI-EN-ISO 9001

attested starting from

1999 and the 95 % of

Testa’s suppliers are

ISO 9000 attested.

Inspection machines:

Packing machines:

Introductions for printing machines: -Reggiani - Stork

- Buser - Zimmer

Our production range

• For raw fabrics

• For finishing

•For rolls

-Simple machinery

-Full automatic machinery

Cutting plan

Introductions for printing machines

1 tirante brace

2 rullo allargatore enlarging roller

3 freno brake

4 rullo folle free roller

5 rullo motorizzato driven roller

6 aspo shaking roller

7 ballerino-compensatore compensator

8 fotocellula photocell

9 ruote per movimentazione wheels for moving

10 dispositivo di centratura centring device

11 tappeto relax fabric relaxing belt

12 entrata da piccolo rotolo comandato input by driven small roll

13 tagliacuce cutting-sewing machine

14

quadro elettrico electrical panel

entrata da grosso rotolo svolgimento assiale

15

input by big roll with axial unwinding

Introductions for printing machines from lap,

small and big driven rolls

Packing machine La Petite

La Petite

The machine allows longitudinal and lateral roll

closing on the same packing station:

longitudinal by thermo fusion welding, lateral

one by thermo retraction.

Plastic winding around the roll is perfectly

sticked, as well as lateral closing.

This machine has a special device, which

reads automatically roll diameter to decide

hot-blowing time and quantity of plastic to

be used.

Packing speed: about 1-1,5 roll per minute.

Packing machine with manual

loading and automatic down-

loading of the roll

Packing machine with rolls

loading by a driven

accumulation table.

Packing machine La Petite

Automatic packing machine La Petite

Fully automatic packing machine La Petite, for rolls coming from line,

equipped with vertical labelling, and tilting devices

Packing machine Speedy 2000 series 1 ÷4

Speedy models to pack up to 3 rolls per minute, mainly indicated for rolls

coming from conveyor line.

•Type of longitudinal closure: by thermo-welding (both La Petite and

Speedy)

Thermo-welding Ultrasonic Clips “Caramel”

closing thermoretractable

system

Difference between La Petite and Speedy

Production: -La Petite about 1-1,5 rolls per minute

-Speedy about 3 rolls per minute

•Type of lateral closures: mod. La Petite only by thermo retractable

system, mod. Speedy by:

This machine allows longitudinal and lateral roll closing by

two different stations: first for longitudinal closure by

thermo fusion welding, lateral one by thermo retraction

closing. Additionally if requested can be integrated in the

middle position with flock cut

Packing machines Spedy 2000 series 1 ÷4

Mod. 111 Basic

Inspection machine with winding unit

behind the operator

Inspecting and rolling machines

Fabric inlets from lap with

motorized relaxing belt or small

driven roll

Mod. 111 Eureka Basic

When packing unit is included

Very compact system

Inspecting, rolling and packing machines

Inspecting – Rolling – Packing machines series Eureka

Mod. 111 Eureka 2

It allows the cutting of the fault, seam or sample in lap.

Fault map is created.

No cut is performed.

Automatic optimalised cutting system

1 Fabric is inspected

Fabric is inspected from big roll

(A-frame) to big roll.

The inspection can be:

•Traditional: with operator •Automatic: with camera

Automatic optimalised cutting system

Result is the fault map

From the fault map data and the user supplied

parameters, the software creates an optimised cutting

plan.

Target of the optimisation is to obtain

the maximum amount of first quality

fabric saving from min. 1,5% up to

max. 3% of first choice fabric

2 Optimalization of the cutting system

Automatic optimalised cutting system

Automatic optimised cutting system

The software calculates one or more (similar) cutting solutions,

that are stored in memory.

There is also the possibility to manually modify the cutting plan

3 Automatic execution of the cutting plan

Automatic optimised cutting system

Eureka machines, controlled by computer, are able to wind at 300 mt

per min., pack and label the fabric automatically, without any need of

operators , carrying out the cutting plan previously processed during the

optimization stage.

We are sure that our machines will meet your complete

approval.

Thank you for your attention

Testa s.p.a

Bukit Cimanggu City Blok G3 No. 6, Bogor 16166 – Indonesia

Phone : +62 251 7536 757

Fax : +62 251 7536 744

Email : dharmatek@tracsworld.com