vÆlvulas arco, s.l. avda. del cid, 8 ref. ct102 made in spain · 2019-10-21 · by gost – russia...
TRANSCRIPT
VÆlvulas ARCO, s.l.Avda. del Cid, 846134 Foios (Valencia - Espaæa)
Nacional:tel.: +34 - 96 149 94 30fax: +34 - 96 149 96 09e.mail:[email protected]
www.valvulasarco.com
Export:tel.: +34 - 96 149 94 29fax: +34 - 96 149 94 28e.mail:[email protected]
Empresa
certificada
ISO 9001
por TUV MS...
Company
certified
ISO 9001
by TUV MS...
MADE IN EUROPE
A - 8 0 L U X E
METAL HANDLE
Ref. CT102 MADE IN SPAIN
Audit visits are performed once or twice a year by each Certification
Body to ensure that our Quality Assurance System can lead us to
reach customer satisfaction in the basis of ISO 9001:2000.
The following marks, and approval certificates are granted to
A-80 series.
SCOPE
A-80 LUXE series are quarter angle brass ball valves designed
for being connected to water pipe system.
As the granted certification shows, the quality materials tests
done to our valves allows them for being in permanent contact
with drinking water.
FEATURES
Body
It�s one piece made, avoiding any leak outwards.
Its higher mechanical resistance is achieved due to its design
and the high quality of the brass used in its manufacture.
The chrome plated surface finishing provides a great resistance
to corrosion conditions in long term installation.
End thread connections are according to ISO 228.
Stem and shut off
To obtain guaranteed leak tightness with a good performance,
we have patented different systems.
Stem and shut off are one piece made.
Supporting clip
Made of POM, is tested and certified to work in contact either
with drinking or hot water.
Designed and manufactured to guarantee the repeatability of the
compression against the shut-off.
Leak tightness system
The leak tightness of the A-80 series is the result of more than
30 years of testing and improvement. The internal and external
shape of this valve is not arbitrary, it�s the result of many tests
and its strongest point.
Handle
Made of injected ZAMAK, with a nickel plus chrome surface
finish to guarantee the best corrosion resistance and a perfect
surface appearance.
SERVICE CONDITIONS
-Operating pressure up to 16 bar [230 psi]. During test installation
can be pressured up to 25 bar [360 psi].
-Service temperature from 0”C [32”F], excluding frost, to 90”C
[194”F].
MATERIALS
Brass Rod
All brass components complies with the European Alloys standards.
-EN 12420: Forged Brass Products
-EN 12164: Copper and Copper Alloys � Brass rod for machined
parts
-EN 12165: Copper and Copper Alloys � Brass rod for stamped
parts.
NBR
All O-rings are made of NBR. This NBR is tested and certified
by recognised institutes to be used in drinking water supply
systems.
POM
The POM used for the injection of the supporting clip,
has been tested by recognised institutes to be used in drinking
water supply systems.
TESTS & CERTIFICATIONS
Hundreds of samples have been tested, by laboratories around
the world, in order to check their compliance with different
countries Standards and their performance and resistance
requirements.
A - 8 0 L U X EMETAL HANDLE
by SAI-GLOBAL - Australia
by CSA INTERNATIONAL - Canada
by IAPMO, R&T � USA
by GOST � Russia
by CTPC - Romania
by TSU - Slovenia
by PZH - Poland
by INSTAL - Poland
by KIWA � The Netherlands
by CRECEP and IRH - France
by AFNOR/ AFNOR - France
A-80 LUXE
LP740 1/2�M x 3/8� 10
LP730 1/2�M x 1/2�M
MADE IN SPAIN