v971d_4_2_2d onda

5/21/2018 V971D_4_2_2D Onda

1/15

Tips: (vidi stranu 8 /http://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-

working-play-store-google-apps-root-explorer.html)

Please carefully read the end of this tutorial , and then hands ! ! !

Brush preparation:

1 , please use the desktop computer WinXP or Win7 (32 -bit) systems , and turn off antivirus software

( part of the anti-virus software will likely upgrade tool in a virus file false documents , and directly

delete ) .

2, the computer 's USB interface can not be occupied by other devices , if your computer is also

connected with a USB keyboard or mouse , you need to do first before you can brush set as follows :

1 ) Right My Computer, select Device Manager, open the Universal Serial Bus controllers

2 ) , select "USB Root Hub", right click and select Properties , then on the pop-up menu of the tab to

switch to the "Power Management" in this column , remove the " Allow the computer to turn off this

device to save power " in front of the check mark
http://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-working-play-store-google-apps-root-explorer.htmlhttp://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-working-play-store-google-apps-root-explorer.htmlhttp://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-working-play-store-google-apps-root-explorer.htmlhttp://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-working-play-store-google-apps-root-explorer.htmlhttp://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-working-play-store-google-apps-root-explorer.htmlhttp://www.androidtablets.net/forum/onda-tablet-forum/51340-new-root-full-working-play-store-google-apps-root-explorer.html

5/21/2018 V971D_4_2_2D Onda

2/15

3 ) , on the computer all the "USB Root Hub" entries need to be a step in the operation, exit the

Device Manager after the completion .

3 , please put the USB cable connected to the host computer 's rear USB port.

Procedure :

1 , unzip the downloaded firmware package , generate the corresponding folder. As shown in V971D

example:

2, open the unzipped folder ( as shown below is V971D models, for example ) , and double-click to

enter the USB-Burning-tool-SPI catalog

3 , find the icon and double-click to open , as shown below :

5/21/2018 V971D_4_2_2D Onda

3/15

4 , click on the upper left corner of the tool configuration - > Import upgrade file option, choose to

upgrade the firmware package ( Note: This firmware package is above the second step directory zip

format file , select the file directly , as shown in V971 dual-core . firmware for example ) .

5 , choose a good after firmware interface as shown below, at the bottom of the tool will display the

firmware load information :

6 , flat first off ( if you are unsure what state the machine can short press the reset button to force

shutdown ) , then press and hold the Home key ( there is a small house on the key icon ) and hold ,

5/21/2018 V971D_4_2_2D Onda

4/15

and then connected to the computer via a USB cable , to be after the battery icon appears on the

screen , press the power button to boot , press the power button is probably about four seconds ,

then release the power button and the Home key . If this is the first brush , then lower right corner of

the computer will pop up a small window prompt the discovery of new hardware and install the

driver asked . ( Note : the same computer to install the driver only when the first brush machine

operation ; When Brush again , no need to repeat the installation drive , you can skip directly to step

10 below . )

7 , the next step is to install the driver , please release the power button and the Home key , and in

the pop-up window, select Item 2: Install from a list or specific location ...

8 , click Next button to specify the path to the driver folder in the folder

5/21/2018 V971D_4_2_2D Onda

5/15

9 , continue to click the Next button to complete the installation of the driver.

Special note: Only the driver is successfully installed , the upgrade tool can recognize the device.

10 In this case, the upgrade tool will automatically recognize the device , as shown below:

5/21/2018 V971D_4_2_2D Onda

6/15

Special note:

1 , the upgrade tool available a total of eight ports , shown here is my first one occupied ports ,

different computers to identify corresponding to the location may not be the same, no need to worry

, as long as the equipment is found on the line.

2 , you can only upgrade a machine , can not simultaneously upgrade multiple machines.

3, if the same recognition to the two devices do not control, continue to the next step 11 operation.

11 , after the equipment is found , click on the right button to start the upgrade of

the plate .

12 , upgrade a machine probably takes about 5-10 minutes , after the completion of the following

figure , above the blue progress bar shows 100% , following port position display color is green ,

which means that the upgrade was successful.

5/21/2018 V971D_4_2_2D Onda

7/15

13 , click Tools on the right of the stop button. Then the machine is turned off , and after pulling off

the USB interface to manually boot.

Note:

1 , back up player and storing useful data before the upgrade , if the machine is inserted TF card ,

please pull out the TF card ;

2 , Please read this carefully before upgrading, there is a risk Brush , improper operation player can

not use , need to contact the Office Depot purchase for maintenance treatment ;

3, if the brush machine fails, a short flat reset button click , and then start again from step 6

operation .

5/21/2018 V971D_4_2_2D Onda

8/15

How to update V971 and V711 to Android

4.1.1 (JellyBean)8 Replies

Onda has changed the way dual-core tablets update to Update 1.5.5 and Update 2.0 (Android4.1.1 (Jelly Bean)). This is different from the first method of update previously released (Update1.4 and 1.5).Here is how you do it now. This is valid for both V971 and V711.

Step 1:

Download the Jelly Bean update from Onda website:

V711http://file2.mydrivers.com/ondata/download/driver/oamp3/V711D/V711D_A4.1.1-1101.rar

V971http://file2.mydrivers.com/ondata/download/driver/oamp3/V971D/V971D_A4.1.1-1101.rar

Step 2:

Remove any external TF or (micro)SD card from tablet. On your Windows XP or 7 PC, unzip thedownloaded file from Onda into a folder of the same name.

Step 3:

Go into the unzipped folder and enter the USB-Burning-tool-SPI folder.

Step 4:
http://ondasg.wordpress.com/2012/11/13/how-to-update-v971-and-v711-to-android-4-1-1-jelly-bean/#commentshttp://ondasg.wordpress.com/2012/11/13/how-to-update-v971-and-v711-to-android-4-1-1-jelly-bean/#commentshttp://file2.mydrivers.com/ondata/download/driver/oamp3/V711D/V711D_A4.1.1-1101.rarhttp://file2.mydrivers.com/ondata/download/driver/oamp3/V711D/V711D_A4.1.1-1101.rarhttp://file2.mydrivers.com/ondata/download/driver/oamp3/V971D/V971D_A4.1.1-1101.rarhttp://file2.mydrivers.com/ondata/download/driver/oamp3/V971D/V971D_A4.1.1-1101.rarhttp://ondasg.files.wordpress.com/2012/11/jbu-2.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-1.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-2.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-1.jpghttp://file2.mydrivers.com/ondata/download/driver/oamp3/V971D/V971D_A4.1.1-1101.rarhttp://file2.mydrivers.com/ondata/download/driver/oamp3/V711D/V711D_A4.1.1-1101.rarhttp://ondasg.wordpress.com/2012/11/13/how-to-update-v971-and-v711-to-android-4-1-1-jelly-bean/#comments

5/21/2018 V971D_4_2_2D Onda

9/15

Find the ImageBurnTool.exe file. Double-click it to start the update tool.

Step 5:

Now you need to load the update image (folder V971D_A4.1.1-1101 ->Resource.V971D_A4.1.1 -1101.zip). Note that the image name ends with a .zip.

To load into tool, go to the top left hand corner of the tool with the character (->

), and choose the Resource file in the unzipped folder.
http://ondasg.files.wordpress.com/2012/11/jbu-3.jpg

5/21/2018 V971D_4_2_2D Onda

10/15

Step 6:
http://ondasg.files.wordpress.com/2012/11/jbu-5.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-4.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-5.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-4.jpg

5/21/2018 V971D_4_2_2D Onda

11/15

Wait for the tool to fully load the chosen image. You will see it appear in the tool as below.

Step 7:

Shut down your tablet. The next sequence is very important. Hold downthe Homebuttonbeforeconnecting you tablet to your PC using the USB cable. While stillholding down the Home button, press and hold the power button for 4 seconds. Both buttonscan be released when you see that the tool has detected the tablet. For users doing it for the firsttime, go to step 8. If you have done step 8 before, go to step 11.

Step 8:

5/21/2018 V971D_4_2_2D Onda

12/15

This step is to install the driver for the tablet. The Home and power button can be released.When you see the device driver installation appear, choose the 2nd option and click next.

Step 9:

Make sure you include the driver location of your update zip folder as a location for the system tosearch to detect the driver. Driver folder is V971D_A4.1.1-1101->USB-Burning-tool-SPI-

5/21/2018 V971D_4_2_2D Onda

13/15

>AmlogicusbBurningdriver.

Step 10:

Click next and wait for driver to be installed.

Step 11:(Make sure steps 8-10 have been done before, else update will not be successful)

5/21/2018 V971D_4_2_2D Onda

14/15

You should see the tablet as detected at this point.

Points to note:

Only 1 tablet can be updated at one time. Do not attempt to update more than 1 tablet at thesame time.If the tool detects 2 USB ports with devices even though only 1 tablet has been connected, ignoreand proceed.

Step 12:

Press the Start () button on the right side of the tool to start the update process.

Step 13:

Updating 1 tablet will take about 5-10 minutes. After it has been completed, you will see the toolas below. It should state 100% and the USB port corresponding to the tablet connection should

be green. Click on the 2nd button below the first to Stop () the tool. After doing this, the

tablet should be in shut down status and it is safe to remove the USB connection to the PC. The
http://ondasg.files.wordpress.com/2012/11/jbu-7.jpg

5/21/2018 V971D_4_2_2D Onda

15/15

tablet can be switched on and will function normally after this.

If the update fails halfway through, press the Stop button. Disconnect the tablet from USB cable.

Go to step 7 and start from there. If a message pops up asking you to do something. It should beat top left hand corner->. After clicking ok on the message, go to the path

and click on () before proceeding with the rest of step 7.

About these ads

Share this:
http://en.wordpress.com/about-these-ads/http://en.wordpress.com/about-these-ads/http://ondasg.files.wordpress.com/2012/11/jbu-13.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-12.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-13.jpghttp://ondasg.files.wordpress.com/2012/11/jbu-12.jpghttp://en.wordpress.com/about-these-ads/

v971d_4_2_2d onda

Documents