aditivador 2

8/6/2019 Aditivador 2

1/4

The 600 Series system offers single or multiple additive injectionat flow rates typically found in aviation refuelers, hydrant systems,heating oil delivery trucks and water treatment vehicles. Theunique positive displacement drive responds precisely to changes

in product volume even at very low flow rates. Like all Hammondsinjection systems, the 600 dispenses precise quantities of additiveat a continuous rate, eliminating the slugging effect typicallyfound in meter pulsed injectors. The additive is injected justahead of the driver, providing complete, consistent additive blend-ing

SPECIFICATIONS: Flooded suction required

Number of additives: 1 Std. Up to 4 Optional

3 Victaulic connections standard (other connectionsavailable, consult factory for details)

Injection ratios: 0-4000 PPM depending upon applica-tion

10-200 GPM continuous operation

10-300 GPM intermittent operation

Product temperature range:- -40- +250 F

Maximum product line pressure: 150 PSI

MATERIALS OF CONSTRUCTION:

Hard anodized aluminum or carbon steel

Metering pump: All wetted parts 300 seriesstainless steel

Elastomers: Aflas, Viton & Teflon

Mechanical Seal: Carbon on ceramic

The model 600 is a completely self-contained unit that offers totally unassisted injection. Product meters and pulsarsare not required allowing a simple and economical installation that provides the customer with guaranteed precision

blending of their additive time after time.

www.hammondscos.com.

Hammonds Technical Services

15760 West Hardy Road

Suite 400

Houston TX 77060

Phone-(800) 582-4224 Fax (281) 847-1857

ADDITI

VE

INJEC

TION

MODEL 600REFUELER AND HYDRANTINJECTOR

Product viscosities: To 10,000 SSU

Fuels, oils, additives, and liquid gases Duty cycle: Intermittent

Smart monitoring package available


2/4

HA M M ONDS TE CHNICA L S E RVICE S

MODEL 600 FLUID POWERED MOTORMODEL 600 FLUID POWERED MOTOR

Standard Equipment:

600 Series fluid motor Hard anodized aluminum housing 3 Victaulic connections Hammonds 1S injection pump delivering ratios to 1400 PPM All stainless steel wetted parts Adjustable while running calibration abilities Non-blocking vent/inject diversion valve Teflon elastomers on injection pump Stainless steel check valves Built-in injection point with check valve up stream of turbine

Graduated calibration bottle White acrylic enamel paint

Optional Equipment:

3 Victaulic clamps (pair)3 x 2 Victaulic reducer clamps (pair)3 NTT aluminum truck flanges (pair)3 x 4 150# reduction connections5 gallon pail mounting bracket6 gallon stainless steel additive tankDesiccant dryer replacementStandard sight flow assembly5 gallon siphon tube assembly

55 gallon siphon tube assembly5-SF sight flow indicator for 5 gallon pail55-SF sight flow indicator for 55 gallon drumSingle or dual remote panel assembly: includes the following:

Mounting bracket with multi-port selector valveStandard sight flow indicator5 gallon siphon tube assembly60 feet 3/8 Synflex tubing

Suction calibration gauge:SCG112 (1x 12) for use with dye, Stadis 450 etc.SCG206 (2x 6) for use with neat Stadis 450, corrosion inhibitor, etc.SCG212 (2 x 12) for use with BioborJF, FIZZY etc.SCG314 (3x 14) for use with FIZZY.

SCG1212 (12x12) for use with high flow capacity applicationsSecurity covers for calibration dials

MODEL 600-1S Injector


3/4

HA M M ONDS TE CHNICA L S E RVICE S

MODEL 600 INJECTOR PUMP OPTIONSMODEL 600 INJECTOR PUMP OPTIONS

Performance Statement: PPM ratings are based on 100% volumetric efficiencies and maximum strokesettings of each fluid end and size. Hammonds recommends for continuous duty applications, no

more than 50% of these maximums be utilized. For intermittent duty, no more than 80% of thesemaximums be utilized.

Total Operation in 24 hours: 0-7 Hours/Intermittent 8+ Hours/Continuous

Single AdditiveInjection Ratio Pump ModelTo 350 PPM 1P7To 1500 PPM 1STo 2000 PPM 1MTo 3500 PPM 2MTo 4000 PPM 1L

To 5000 PPM 2L

Dual AdditivesFirst additive to 1500 PPM. Second additive as followsInjection Ratio Pump ModelTo 350 PPM 1S-1P7To 1500 PPM 1S-1STo 2000 PPM 1S-1MTo 4000 PPM 1S-1L

First additive to 2000 PPM. Second additive as followsInjection Ratio Pump Model

To 350 PPM 1M-1P7To 1500 PPM 1M-1STo 2000 PPM 1M-1MTo 4000 PPM 1M-1L

First additive to 4000 PPM. Second additive as followsInjection Ratio Pump ModelTo 350 PPM 1L-1P7To 1500 PPM 1L-1STo 2000 PPM 1L-1MTo 4000 PPM 1L-1L

Note: The standard production Model 600 is available with a total of one output shaftthat will carry a maximum of two fluid ends in any combination of sizes, either single ordual additives as detailed above. Special units are available for injection of more thantwo additives. For information on custom Model 600 systems with dual output shaftsand/or secondary gear reduction, contact the factory.


4/4

RP-1SINGLE ADDITIVE

RE

MOTE

OP

ERATING

PANELS

www.hammondscos.com.

Hammonds Technical Services

15760 West Hardy Road

Suite 400

Houston TX 77060

Phone-(800) 582-4224 Fax (281) 847-1857

MODEL RP-1

Remote operating capability for one additive

5-way selector valve for Inject, Off, Calibrate and Bleed

Heavy steel panel for mounting on horizontal or verticalsurface

Suction Sight Flow Indicator

Suction Strainer

All necessary stainless fittings and 60 feet of 3/8 high

density Synflex tubing (stainless available at extra cost)

Siphon tube for FIZZY 5 Gallon Container

PUT CONTROLS CLOSE TO THE OPERATORIt is not always convenient to install the injector closeto meters, hose reels and other operating controls.The Remote Panel keeps operating and calibration

controls within easy reach of the operator and withineasy sight for those customers who want verificationof injected additive.

PROOF OF INJECTIONUnique with Hammonds injectors, our exclusive SightFlow Indicators allow visual proof that additive is beingdrawn into the system. Unlike some who use floatingballs and propellers that can indicate fluid movementbut not necessarily injection

STANDARD FEATURES:

Sight Flow Indicator

Inject / Off / Calibrate / Bleed controls

Suction strainer 16 oz. calibration bottle

All necessary tubing and fittings

Siphon tube for 5 Gallon FIZZY pail

Line pressure simulation valve for the most accurate calibration tests

OPTIONS:

Lockable covers

Custom labeling

Additive injection flashing light

All stainless steel tubing

aditivador 2

Documents