4. referencias

Universidad Autónoma de Nuevo León

Curado Interno Mejorado (VERDiCT)

REFERENCIAS BIBLIOGR

Universidad Autónoma de Nuevo León – Facultad de Ingeniería Civil


REFERENCIAS BIBLIOGR ÁFICAS

Facultad de Ingeniería Civil

ÁFICAS



1) Bentz, Dale P,et al. “VERDICT; viscosity enhancer reducing diffusion

in concrete technology ; a new approach to decreasing transport concrete, concrete international, 2009.

2) Steven H. Kosmatka, Beatrix Kerkhoff, an William C. Panarese “Diseño y control de Mezclas de Concreto”. S.l.: Portland Cement Association, 2004

3) Taylor F .“Chemistry of cement” 1era Ed. Urmo. 1971

4) A. M. Neville; "Properties of Concrete", Fourth Edition, Wiley, 1996

5) P. Kumar Mehta and Paulo J. M. Monteiro ; "Concrete: Microestructure, Properties and Materials", Indian Edition, Indian Concrete Institute, 1999;

6) Askeland Donald et. al, “ciencia e ingeniería de los materiales”,4ed McGraw-Hill, 2001.

7) APASCO, Manual técnico ”Manual de construcción de apasco”,

Holcim,2004

8) ACI 318-05 Reglamento de concreto para uso estructural

9) Aitcin, Pierre Claude, ”concreto de alto desempeño”, E&FN SPON, 2006.

10) Lynam, C.G. 1-139, s.l. : Oxford University Press, London, UK, 1934. “Growth and movement in Portland Cement Concrete".

11) M. Suzuki, M. Seddik Meddah, R. Sato. Use of porous ceramic waste aggregates for internal curing of high-performance concrete. 373-381, s.l.: Cement and Concrete Research, Vol. 39.

12) ACI 116R. Reglamento del American concrete Institute

13) ACI 212-3R. Reglamento del American concrete Institute

14) IMCYC Aditivos para el concreto, ACI,1993

15) Basf Chemical Company , ficha técnica del uso del aditivo reductor

de la contracción. 2010

16) Richard Morin , Gilbert Haddad an Pierre Claude Aitcin, Crack – Free 2. High performance. 2002.

17) San Juan-Barbudo, Miguel-Angel, Castro-Borges, Pedro , “Acción

de los agentes químicos y físicos del concreto “ IMCYC, 2001.



18) Corral, José Toirac., 2004. Patología de la construcción grietas y fisuras en obras de hormigón; origen y prevención; Ciencia y Sociedad. 72-114, Republica Dominicana : Instituto tecnológico de Santo Domingo, Vols. 29, número 001.

19) Ei-ichi Tazawa, Shingo Miyazama and Tetsuruou Kasai ., 1995,

“Chemical shrinkage and autogenous shrinkage of hydrating cement paste”. 288-292, s.l. : Cement and Concrete Research , 1995, Vol. 25 No.2.

20) Hoam Lam “Effects of internal curing methods on restrained shrinkage and permeability, Portland Cement Association Research & Development Information Serial No. 2620.

21) Tazawa EI. Technical committee., 1999. Autogenous shrinkage of

concrete. report., London : s.n.

22) T.C. Powers, T.L. Brownyard., 1948 Studies of the physical properties of hardened Portland cement paste. Chicago : Research Laboratories of the Portland cement Association, Vol. Bulletin 22.

23) Richard Morin, Gilbert Haddad and Pierre Claude Aït cin, Crack-

Free. 2002. High-Performance Concrete Structures

24) IMCYC., 2008 Construcción y Tecnología. 35-36, s.l. : Vol. 246.

25) ACI 224-01. Control de fisuración de estructuras de concreto . 12-13, s.l.

26) O.M. Jensen, P.F. Hansen., 2001. Water-entrained cement-based materials: I. Principle and theoretical background. 647-654, s.l. : Cement and Concrete Research, Vol. 31.

27) Bentz, Dale P. et al. “capitalizing on self-desiccation for autogenous distribution of chemical admixtures , procceding of the 4th international seminar on self desiccation and its importance in concrete technology (ed) B. Persson, Dale Bentz & L.O. Nilson, pp.189-196,2005.

28) Bentz D.P, Snyder K.A;Cass,L.C; Peltz,L.A. ,”Doubling the service life of concrete structures , I. Reducing mobility using nanoscale viscosity modifiers, CCC, Vol.30,8,pp.674-678,2008.

29) Kovler Konstantin, O.M Jensen “internal curing of concrete” State of the art report RILEM TC 196-ICC, 2007.

30) Bentz, Dale P. et al. “Water movement during internal curing”

Concrete international, pp (40-45) October, 2006.

31) Lura Pietro, Bentz Dale, Konstantine Kovler ,”Pumice aggregates for internal water curing” Technical Paper



32) O.M.Jensen , P.F Hansen ,”autogenous deformation and rh-change in

perspective ,1859-1865, s.l.Cement and concrete research.2011.

33) Mustafa Shamaran, Mohamed Lachemi et al. ”internal curing of engineered cementitous composites for prevention of early age autogenous shrinkage cracking”, cement and concrete research 39,pp.893-901,2009.

34) Zhutovsky s, Kovler K, Benthur A, “efficiency of lightweight aggregates for internal curing of high strength concrete to eliminate autogenous shrinkage, Mater, strct. 35(2)97-101, 2002.

35) Henkeseifken,Castro J, Bentz Dale , “water absorption in internally

cured mortar made with water filled lightweight, aggregate, cem.concr.res.39, pp.883-892,2009.

36) Jozwiak D, Niedzwiedzka et al , “Sealing resistance of high performance concretes containing a small portion of prewetted lightweight fine aggregate, CCC 27, pp.709-715, 2005.

37) Burcu Akcay “Effects of distribution of light weight aggregates on internal curing of concrete, CCC 32, pp.611-616, 2010.

38) De la varga Igor, Castro Javier, Bentz Dale, Weiss Jason , ”Application of internal curing for mixtures containing high volumes of fly ash “ cement and concrete composites, 2012.

39) Valdez-Tamez,P.L; Duran-Herrera,A; Fajardo-San Migu el, Gerardo; Juárez-Alvarado, Cesar , “influencia de la carbonatación en morteros base cemento portland y Ceniza Volante, Ingenierías, Investigación y tecnología ; UNAM, Vol. X,1, p.31-41,2009.

40) Sulpha,P;Wong,S.F; Wee, T.H; et al, “ carbonation of concrete containing mineral admixtures journal of materials in civil engineering , ASCE,p.p.134-143,2003.

41) Kovler konstantin, Jensen O.M, “Novel techniques for concrete curing”, technical paper, Concrete international,2005

42) Kulakowski,Marlova P et. al ”Carbonation –induced reinforcement

corrosion in silica fume concrete “,construction and building materials, 23,pp189-195,2009.

43) Instituto mexicano del trasporte Angélica del Valle Moreno Tezozómoc Pérez López Miguel Martínez Madrid



44) Craeye, Bart, Geinaert Matthew,De Schutter Geert .”Super absorbing polymersas an internal curing agent for mitigation of early age cracking of high – performance concrete bridge decks, Construction and building materials, 25,pp.1-13,2011.

45) Andrade, Carmen et al , “Relation between colourimetric chloride penetration depth and charge passed in migration test of the type of standard ASTM C1202-91”CCR,29,pp.417-421,1999.

46) Dr. Ramón L. Carrasquillo, Dr. Brayan E. Barragán e t al ,2008. Tecnología del concreto sustentable; retos y tendencias, memorias.

47) Castro Javier, Keiser Lucas, et al , “Absorption and desorption properties of fine lightweight aggregate for application to internally cured concrete mixtures” CCR, 33,pp.1001-1008,2011.

48) ASTM C127 -12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate.

49) ASTM C128 -04, Método de Ensayo Normalizado para Determinar la Densidad, la Densidad Relativa (Gravedad Específica), y la Absorción de Agregados Finos

50) ASTM C138/C138M-09 Método de Ensayo Normalizado de Densidad (Peso Unitario), Rendimiento, y Contenido de Aire (Gravimétrico) del Concreto.

51) ASTM C136-06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.

52) Trujillo-Rodriguez, Raul; ”Uso de agregado ligero como medio de curado interno en concretos de alto comportamiento fabricado con puzolanas” Tesis, FIC-UANL, 2011.

53) ASTM C185-01 Standard test for air content of hydraulic cement mortar.

54) ASTM C33M-08 Standard specification for concrete aggregate.

55) ASTM C150 / C150M - 12 Standard Specification for Portland Cement

56) Cemex, “Manual Técnicos del concreto en obra” ; recurso electrónico; 2004

57) ASTM C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete.



58) Bentz, Dale P., et al. “Early Age properties of cement – based materials: I. Influence of cement finess; ASCE. J. Mat.Civ. Eng.20(7)5002-508.2008

59) ACI ”Manual del técnico para pruebas al concreto en obra” CP-1(01),2001

60) ASTM C143 Standard Test Method for Slump of Hydraulic Cement Concrete.

61) ASTM C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

62) AASHTO T277 Standard Method of Test for Rapid Determination of the Chloride Permeability of Concrete

63) ASTM C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

64) ASTM C 1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

65) DURAR, “Manual de inspección, evaluación y diagnostico de corrosión de estructuras de hormigón armado” CYTED.

4. referencias

Documents