historial de versiones - belge.com.br
TRANSCRIPT
Historial de Versiones
Actualizado: 18/10/2021
23 años de innovación
continua
¡Simuladores ProModel siempre a la vanguardia!!
Desarrollo continuo para garantizar a nuestros clientes siempre el
simulador más potente, flexible y amigable.
Pionero en permitir integraciones (OLE / Active X/ MSOffice / bases de
datos)
Índice INTRODUCCIÓN...........................................................................................................................................4
10.9.112 (October 2021)............................................................................................................................6
10.8.81 (August 2021)..................................................................................................................................6
10.7.53 (June 2021)......................................................................................................................................6
10.6.36 (May 2021).......................................................................................................................................6
10.5.2.3726 (March 2021)...........................................................................................................................6
10.5.0.3688 Release | December 2020.................................................................................................7
10.4.2.3678 Release | October 2020......................................................................................................7
10.4.0.3594 (July 2020)................................................................................................................................7
10.3.1.3536 (April 2020)...............................................................................................................................8
10.3.0.3502 (February 2020)......................................................................................................................8
2018 SP3 (October 2019) – 10.2.0.3428..................................................................................................8
2018 SP2 (August 2019) – 10.1.2.3366.....................................................................................................9
2018 SP1 (May 2019) – 10.0.1.3260..........................................................................................................9
2018 (December 2017) – 10.0.0.3218.....................................................................................................9
2016 SP1 (November 2016) – 9.3.1.2081..............................................................................................10
2016 (June 2016) – 9.3.0.2051.................................................................................................................12
2014 SP3 (March 2016) – 9.2.2.1900......................................................................................................12
2014 SP2 (January 2015) – 9.2.0.1860...................................................................................................13
2014 SP1 (September 2014) – 9.1.1.1658.............................................................................................13
ProModel 2014 release (June 2014) – 9.1.0.1639..............................................................................14
2011 SP4 (November 2012) – 8.6.2.1036..............................................................................................17
2011 SP3 (April 2012) – 8.6.1.996............................................................................................................18
2011 SP2 (December 2011) – 8.6.0.963................................................................................................19
2011 SP1 (June 2011) – 8.5.1.858............................................................................................................21
ProModel 2011 release (May 2011) – 8.5.0.847.................................................................................22
2010 SP2 (March 2011) – 8.1.0.623........................................................................................................24
2010 SP1 (January 2011) – 8.0.1.566.....................................................................................................25
ProModel 2010 release (November 2010) – 8.0.0.557....................................................................26
7.5.5.374 (November 2009)....................................................................................................................29
7.5.4.373 (August 2009)...........................................................................................................................29
7.5.3.364 (April 2009)................................................................................................................................29
7.5.2.317 (February 2009).......................................................................................................................30
7.5.1.308 (November 2008)...................................................................................................................31
7.5 Release (August 2008).....................................................................................................................32
7.0.12.243 (September 2007)................................................................................................................36
7.0.11.241 (May 2007).............................................................................................................................36
7.0.10.228 (December 2006).................................................................................................................37
7.0.9.227 (September 2006)...................................................................................................................37
7.0.8.225 (August 2006)...........................................................................................................................38
7.0.6.216 (June 2006)................................................................................................................................38
7.0.5.207 (May 2006).................................................................................................................................38
7.0.4.201 (April 2006).................................................................................................................................39
7.0.3.198 (March 2006).............................................................................................................................40
7.0.0.194 (February 2006).........................................................................................................................40
7.0 Release (January 2006) – 7.0.0.191................................................................................................40
6.2.1.130 (June 2005)................................................................................................................................43
6.2.1.127 (May 2005).................................................................................................................................43
6.2.0.118 (February 2005).........................................................................................................................43
6.2.0.117 (January 2005)..........................................................................................................................43
6.2.0.115 (November 2004).....................................................................................................................43
6.2.0.96 (Maintenance Release, August 2004).................................................................................43
6.1.47 (Maintenance Release, January 2004)..................................................................................43
6.1.41 (Maintenance Release, September 2003)............................................................................44
6.0 Features (Released April 2003).......................................................................................................44
2002 (5.0) Features (released April 2002)...........................................................................................45
2001 (4.5) Features (released April 2001)...........................................................................................45
4.21 and 4.22 Features (released second half of 1999)................................................................46
4.2 Features (released first half of 1999).............................................................................................46
4.1 Features (released October 1998)................................................................................................46
INTRODUCCIÓN
Promodel es líder mundial en el sector del modelado, simulación y optimización de
procesos de negocio, ofreciendo soluciones especialmente desarrolladas para
diferentes sectores, tales como:
• Industria (fabricación o procesos continuos);
• Logística;
• Servicios (bancos, transporte, etc.);
• Salud (hospitales, laboratorios).
Principales productos de BELGE / Promodel Corp .:
Con versión en español
ProModel es un simulador de procesos de eventos discretos para aplicaciones de
fabricación y logística. Potente en la planificación y mejora de los sistemas de
producción. Con mucha precisión, genera modelos computacionales que configuran
la logística o la fabricación digital. Realiza potentes análisis predictivos y es indispensable
en la planificación y la toma de decisiones.
Pruebe nuevas ideas sin interrumpir su operación actual.
Verifica la capacidad real del sistema, prevé el uso de los recursos, mejora los procesos,
identifica los cuellos de botella y cómo afrontarlos adecuadamente.
Con versión en español
Similar a ProModel, pero centrado en aplicaciones sanitarias.
Nos permite hacer virtual el hospital, la clínica o el laboratorio.
Experimentar con diferentes estrategias para lograr mejores resultados para los pacientes,
mejorando los niveles de servicio, tales como: tiempo de estadía (LOS), tiempo hasta la
primera cita, entre otros.
ProModel ofrece 3 tipos de licencias, sus diferencias se muestran en la siguiente tabla:
Licencia Demo – Run Time Silver
Licencia ProModel Student
Licencia ProModel Full
Tabla comparativa de licencias ProModel
BELGE Consultoria es líder del mercado en el segmento de Simulación en Sudamérica y
como distribuidor exclusivo de Promodel en Brasil desde 1994 informa aquí la historia de
estas versiones.
Hemos brindado excelentes servicios al gran grupo de nuestros clientes, a través de
soporte técnico, capacitación y coaching en estas poderosas herramientas /
tecnologías. Para obtener más información, visite los enlaces a continuación.
• Realización de proyectos de consultoría a medida:
https://www.belge.com.br/consultoria_esp.php
• Venta de simuladores ProModel y formación orientada a herramientas:
https://www.belge.com.br/promodel_esp.php|
https://www.belge.com.br/cursos_esp.php
Hemos sido el líder del mercado en simulación de sistemas durante 25 años:
o Lista de clientes de Belge:
https://www.belge.com.br/clientes_esp.php
• Conoce algunos de nuestros casos de éxito:
https://www.belge.com.br/indlog_esp.php
10.9.112 (October 2021)
Enhancements and Improvements Output Viewer COM enhancements:
Output Viewer with exporting Time Series of variables where the correct date format was not formatted
correctly upon COM export
Output Viewer had missing datapoints resolved - upon export through COM there was a missing data
point.
Navigating from Background Graphics issues resolved: This was an issue introduced when models are
protected modules access is not available.
Default Graphics Library is now set to PROMODEL.GLB.
Upgraded LIBXL for PMServer - this update handles IF functions better with regard to arrays.
10.8.81 (August 2021)
Enhancements and Improvements Added all new student models for new edition of “Simulation Using ProModel”
Regular bug fixes.
10.7.53 (June 2021)
Enhancements and Improvements Improved issues reported with cranes associated with scheduled resources
Regular bug fixes.
10.6.36 (May 2021)
Enhancements and Improvements Improved Scenario grids
Improved window section focus
Improved Subroutine module stability
Grid Blank Out resolved
Caret selection stability improvements
Tabbing stability issue improvements
Logic tool tips improvements to display more intelligently
Entity spot graphic in the grid improved view
Improved Issues with model protection
Improvements to dynamic plots
OV viewer issues with resource name length improved
Regular bug fixes.
10.5.2.3726 (March 2021)
Enhancements and Improvements Moved General Information to the Home Ribbon
Improvements with Write statements
Routing bounding box enhancements
Shift Carryover improvements
Downtime grid stability improvements
Subroutine stability improvements
Improved crane stability
Improvements to Graphic Editor
ProGraphic stability for 64 bit Excel
Regular bug fixes.
10.5.0.3688 Release | December 2020
Enhancements and Improvements Background color changes while panning during simulation
Auto Orientation for Entities graphics while on conveyors
Entities by default now rotate based on the orientation of the conveyor settings Widthwise (right side of
the entity graphic) or lengthwise (top of the entity graphic).
Runtime errors improvements.
Regular bug fixes.
10.4.2.3678 Release | October 2020
Enhancements and Improvements Licensing improvements from COM
Resolved issues with SaveAs related to COM
Improvements to COM command abilities
Statistic collection stability enhancements
Scenario manager display issues resolved
Resolved Model Print text issues.
Improvements regarding Save and SaveAs related to ProModel.INI
Licensing Stability improvements
Regular bug fixes.
10.4.0.3594 (July 2020)
Enhancements
System Functions DistanceTraveled() - Returns the distance traveled of a resource; and its unit/s.
Bug Fixes and Improvements Save As improvements.
Dynamic Plot enhancements.
Tank creation improvements.
Conveyor stability improvements.
Graphic Editor stability improvements.
Additional language support with licensing.
Support for Minitab 19.
Improvements with Model Collaborator opening the model after saving.
Regular bug fixes.
10.3.1.3536 (April 2020)
Bug Fixes and Improvements
Improved Error logging
Improved array import stability
Enhancements to licensing stability
Resolved ability to disable shift in right-click menu
Stability with hotkey improved.
10.3.0.3502 (February 2020)
Enhancements
Licensing All customers that are current on Maintenance and Support contracts will simply install the software on
their machine and create a user account which they will then log in with. The new licensing will allow the
following:
Improve the ability to move from machine to machine without termination of license.
Give ability to check out a license and go offline
Enhance network license capability
No license software or hardware is now required to reside or be maintained on a server.
Office 64 bit support Office 32 bit and 64 bit are now supported for import/export, as well as ActiveX.
Bug Fixes and Improvements Shift Carryover improvements
Resolved issues with scenario manager
Array export sheet naming issues
Regular bug fixes
2018 SP3 (October 2019) – 10.2.0.3428
Enhancements
Entity Spot Enhancements Entity Spots now will resize based on the zoom percent of the model. Drastically improving scaling
ability.
Background Graphic to Scale With the Background Graphic to Scale option in the Insert Ribbon, you can select a background
image, including DWG (requires AutoCAD® to be installed on your machine).
The image can be zoomed in and out, and panned to find the correct section of the model
that you want to place markers on to indicate distance and grid units desired. The image will
be placed in the model as the background scaled accordingly to your specifications.
Unique Graphic Libraries Each model will now have the ability to have a unique Graphic Library located in the same directory
as the model is stored.
Bug Fixes and Improvements Additional grid stability improvements
Macro stability improvements
Enhancements to Array properties
Improvements to Contextual Help
Regular bug fixes
2018 SP2 (August 2019) – 10.1.2.3366
Enhancements
System Functions
ScenarioName() - Returns current scenario name when the function is invoked in logic; providing
ability for more custom reporting.
SysClock() - Returns the System Date and Time when the function is invoked in logic.
Bug Fixes and Improvements Resolved logic window stability
Shift carryover improvements
Auto Update improvements.
Grid stability improvements
File save stability improvements
Regular bug fixes
2018 SP1 (May 2019) – 10.0.1.3260
Enhancements Macros use able in Array import/export fields. Macros can replace File, Sheet, and Cells; users can
now experiment with import and exported arrays by changing the macro scenario parameters.
Bug Fixes and Improvements Resolved logic window issues with compiling
Subroutine improvements and stability
Shift carryover improvements
Regular bug fixes
2018 (December 2017) – 10.0.0.3218
Features
Ribbon UI The traditional menus and toolbars have been replaced with a fluent Ribbon bar like the one you find in
Microsoft Office applications. The new Ribbon makes it easier to access the various modules and features
within the application and better facilitate touch screen and high-resolution devices.
Docking Windows Windows are now docked within the new workspace interface, which means that when you adjust the
size of one window, the others automatically resize accordingly. Say goodbye to overlapping windows.
You can also stack windows on top of each other and quickly access them from their respective tab thus
saving valuable view space.
Right-Click Context Menus Context menus are available in every table and accessible by right-clicking in any field within that table.
For example, you will be able to quickly delete, insert or move a record with a simple right-click of the
mouse. The right-click context menus in Background graphics are improved and provide new access to
editing other modeling elements such as locations and variables.
Quick Access Toolbar Add highly used ribbon buttons to the Quick Access toolbar (located in the upper left corner of the
application) for fast and easy access to the program functionality they provide.
Window Persistence Tired of leaving a module only to return and have to reopen its sub-windows? In this new release, all
windows persist! If you leave one module for another (e.g. to create a new global variable), when you
return to that module, all its previously open windows will be reopened.
Single Background Graphics Mode No more discussion or decision on whether to go to Front of Grid or Behind Grid mode when creating
background graphics. You simply just go to Background Graphics for editing images. Create shapes, add
text and import pictures through the new Insert ribbon.
Recent Model List The list of recently opened models in the File application menu has been expanded from five to up to 19.
Pin your favorite model files to the top of the list and hover over any model name to reveal the full path
to the model.
Enhancements New and updated hotkeys for fast access to key modules and application features.
Super Tooltips appear revealing hotkeys and help snippets when hovering over ribbon buttons, and
selecting F1 opens online context help for the given button.
Variable labels can be quickly created using the hotkey Ctrl+T and then clicking on the Layout.
SimRunner Input Factors have been expanded beyond the previous limit of 500.
Simultaneously run an optimization in SimRunner and continue editing your model.
Conveniently cycle through all open windows using Ctrl+Tab.
Name-Index Numbers are displayed in right-click context menus.
Selecting Continuous Trace now opens a window and begins tracing (like Step Trace Events).
When exporting your model to a text file, you are now prompted whether or not to open it right
away.
Fixes In some cases, a location was not able to go down for a Usage downtime if an earlier Usage
downtime had preempted one of the location’s previous Shift downtimes at some point.
Includes Output Viewer 4.5.3.1260 containing the following fixes:
“Failed to Export” error appeared when attempting to export Time Series data to Excel.
2016 SP1 (November 2016) – 9.3.1.2081
Features
Resource Distance Traveled Statistics
The distance your resources travel over the course of a simulation is now collected and reported in
Output Viewer. It is displayed as Total Distance Traveled in Resource Summary reports and tracks the
overall travel distance for individual units.
In-Process Resource Utilization Statistics Access the utilization of your resources at any time during simulation. Using the newly modified
PercentUtil() function, you can find out the utilization of individual units of a resource or a summary of all
units of a given resource type. This allows you to make dynamic logical decisions or write out custom
statistics to a CSV or Excel file.
Identify Captured Resource Units In addition to determining which resource you’ve captured, you can now find out the specific unit of that
resource as well. With the new OwnedResourceUnit() function, you can get the unit number of any
resource owned by an entity. This is useful when collecting custom resource statistics at the individual
unit level.
Quickly Access Element Definitions Have you ever been writing or viewing logic, and wanted to quickly see the definition (or details) of a
specific subroutine, array, location, etc.? Well, now you can! Simply highlight that model element in logic,
press the F12 key, and you will be taken to that element’s specific record in its edit table. For example, if
you highlight a subroutine name in logic and press F12, you will be taken to its exact record in the
Subroutine table.
Programmatic Export of Statistics The statistical results of your simulation runs can be programmatically accessed through a new API to
Output Viewer. You can get the raw data, down to the individual replication, or have it summarized or
grouped (just like in Output Viewer) prior to accessing it. Either way, you can access your results, for
example to load into Excel or a database, for analysis outside of Output Viewer.
Enhancements When exporting Array data at the end of simulation, the replication number is no longer written out
in the Excel Sheet name if “Export after final replication only” is checked.
Minitab version 17.3 is now supported.
Fixes After saving and closing a model, upon reopening it the Build menu would sometimes be disabled and
prevent access to the model elements needed to build the model.
Stat::Fit was crashing when attempting to execute an AutoFit for some customers.
In some cases, during installation, the Setup would fail saying that Sentinel drivers could not install.
Intellisense was not coming up when attempting to specify the 2nd dimension of an array being
assigned to a local variable.
ProGraphic.xls was not creating a graphics library.
Output Viewer would open at the end of simulation, along with Minitab, even though it was
unchecked in Simulation Options.
If Process Simulator 2016 was installed before ProModel 2016, the product licenses would be invalid.
3D Animator would throw an error when attempting to create a package file.
2016 (June 2016) – 9.3.0.2051
Features
Simplified Single Click Installation and Licensing Enter your Serial Number and Email address and click Install. Nothing more to do as the software is
installed and licensed without further action.
Intellisense Optional If you like to enter your model logic freely, in your own format and without prompts, you can turn off the
Intellisense feature and write your logic however you like.
Shift Carryover and Grouped Entities Resources that entities capture prior to grouping, and any that the grouped entity subsequently captures,
can be pulled off shift and replenished through this shift carryover capability. The grouped entity will only
resume processing once all resources have been replaced.
Failed Arrival Statistics for Ordered Entities Previously, only explicitly defined entity Arrivals automatically collected stats when failing to arrive (due
to a lack of available capacity). Now, you can individually control which entity-location Order statement
reports when it fails to arrive at its ordered location.
Fixes Performing a search within a Logic window would sometimes cause the application to crash.
The font and font size for the Trace text were small and difficult to read.
Entering some unique text in the Notes window of the Variables table, would cause the application to
crash.
Using the Expression Builder to enter a value in the Variation or Offset field in the First Time dialog of
the Arrivals table, would crash the application after the dialog was closed.
Text in an “Unable to simulate model” error message was being cut off.
Includes Output Viewer 4.5.1.1226 containing the following fixes:
Negative x axis values were being displayed in Time Plot charts for simulation results with a Warmup
period and Grouping set to None for the chart.
2014 SP3 (March 2016) – 9.2.2.1900
Microsoft Compatibility This release supports Windows 10 and Office 2016 (32-bit).
Fixes Various user interface elements should appear better under different Windows DPI settings.
GetResRate function was not being allowed in Subroutine Logic. The function is allowed in Operation
and Move logic so it should only be checked when in context from where the subroutine is called.
A crash would occur in a specific situation with cranes in a model.
The first record listed in the External Files table would be switched to be a Shift type when the model
was simulated.
Includes Output Viewer 4.5.1.1225 containing the following fixes:
“Index was out of range” error occurred when Grouping of None was selected for a Location State
report.
In Spanish and Portuguese versions, no stats were showing up in the Entity, Resource and Location
Cost tables.
In Spanish and Portuguese versions, Location Summary table values were being converted improperly
to another time unit.
The x axis discrete labels on a Histogram chart were displaying negative values when the Bar Width
was defined with a number less than 1.
The decimal precision of values displayed for some bars in a Histogram would exceed the user
defined precision when the Bar Width was set to less than 0.17.
2014 SP2 (January 2015) – 9.2.0.1860
Features
SharePoint Connection Collaborating with your team while maintaining the integrity of the data driving the model just got easier.
You can now store your external files in SharePoint 2010 or 2013 and simply reference them in your
models. This includes Excel files used in Array Import and Export, Entity Location, and External Arrival files
and text or CSV files used in Read and Write statements. SharePoint allows you to control who on your
team has read or write access to the data and ensures the most up-to-date data set no matter where your
models are simulated.
Multi-View Runner Tired of switching between views of your model during simulation to catch glimpses of activity in various
sections? Why not be able to always keep your dashboard of variables in view while following an entity
through the system? Well, now you can! Multi-View Runner allows you to configure up to 4 different
views per monitor and designate which one will be displayed in each view window. This is also great for
presentations in a group setting where you can simultaneously highlight different portions of your model
by zooming in and displaying each on separate monitors.
Fixes Windows system memory was not being freed properly for models that contained EMF image files,
which would continue to increase each time the model was loaded.
A crash would occur after a shift carryover was initiated in a unique case where multiple units of a
resource were re-captured and the entity continued to the next statement in logic when it should
have waited for additional resources to be captured prior to moving on.
Initiating a Save As on models that contained a period “.” in the name and also output results (with a
.pmov), would cause Output Viewer to crash upon attempting to view the results of the new model.
Running an optimization in SimRunner on a model that had Model Instructions defined would cause
the Model Instructions window to open at the start of each new experiment.
Compiling a macro in a specific model caused the compiler to get stuck in an infinite loop.
Upgrading an existing installation of the program to a new version, in some cases, would fail saying
that it needed SQL Native Client x64 prerequisite installed.
2014 SP1 (September 2014) – 9.1.1.1658
Fixes Auto-update was not checking for new updates to the software.
An array would fail to import if a prior array had already imported from the same Excel file and it was
set to Keep the data between replications whereas the current array was set to Clear.
In some cases, exporting array data to Excel was not working.
Not all lines of logic in a Logic window would print.
Model merge was producing an error and failing to merge.
Output path in Simulation Options was not retaining any path entered.
If the first array was disabled from importing from a file, any subsequent arrays importing from that
same file would not import.
In the Portuguese version, observation-based variables were being reported as time weighted in
results.
Context section of Debug window was overlapping the Logic section if the computer font settings
were set to higher than 100%.
“Internal Error: Resource state mismatched” error was occurring for a model with multiple cranes in
the same network.
In some cases the Debug window was not showing the line of code being highlighted (it was scrolled
out of view).
Importing a WMF image as a background graphic or into a graphics library would make the
transparency areas of the image white.
Includes Output Viewer 4.5.1.1206 containing the following enhancements and fixes:
On a Turkish Windows OS, statistics for entities and locations were not displaying in Output Viewer.
Entity Cost table was incorrectly labeled Entity States.
ProModel 2014 release (June 2014) – 9.1.0.1639
Features
New Logic Windows New logic windows have been implemented to help you build your logic faster, easily verify it and more
clearly understand it. Color has been added to visually distinguish your statements and functions,
comments, and strings. You can even change the colors and font of the logic windows to customize them
as you like. To encourage good formatting, auto-indentation for blocks of logic and begin-end brackets
has been added. Every line of logic is numbered to quickly locate areas of your code during verification
and troubleshooting. These new capabilities help better visualize your logic while Intellisense and the
Syntax Guide help you build it faster.
Intellisense Intellisense is what it sounds like; an intelligent list of all logic elements that pops up as you define your
logic so you can quickly write it. Isn’t that what you thought it was? J. This list of elements appears as you
type and includes all the statements, functions, locations, entities, resources, variables, attributes, arrays,
distributions, etc…basically everything you need to write logic. And the beautiful thing is, you don’t have
to remember exact names. As you start typing, the list essentially filters and highlights the element name
that begins with the characters you typed. If the highlighted element is the one you want, select tab,
space, or enter and that name will be committed to your logic. Fast and easy!
Syntax Guide After a statement or function is added to your logic, a tooltip will appear displaying the syntax for the
statement or function with all its possible options. No need to remember what is required or take time to
look it up in Help; the Syntax Guide will appear and show you. This saves you time and keeps you focused
on your logic.
Debug Window Expanded View Along with new Logic windows, the Debug window has been improved to show more than three lines of
logic! As you step from line to line, you can scroll and see the entire window of logic and can anticipate
where it will go next and understand where it has come from.
Probability Field Flexibility Varying probabilities for rework, line balancing, patient flow, etc. is now easier than ever to setup and
include in scenario analysis. Simply add macros in your routing probability fields and define them as
scenario parameters! Also, initialize and manage your routing probabilities through an array import.
New Resource Search Type A new way to choose how entities capture resource units is by First Available. This search type gives
priority to units 1, 2, 3, etc. in that order, which ensures that only the maximum number of units needed
at any one point during the simulation is all that is ever utilized. This gives you the ability to run your
model in a pseudo unconstrained scenario and determine exactly how many units you need to complete
the work defined in your system.
Model Instructions Document your models, provide instructions on how to run them, and even explain what the results mean
through utilizing images and links to online content. All this can be included in a rich text formatted (RTF)
document and added as Model Instructions. Whenever your model is opened, the Model Instructions
window will appear, displaying the contents of your document. From this window, scenarios can be
simulated or the window can be dismissed allowing the user to explore model.
Getting Started Panel With the new Getting Started panel, you have immediate access to demo models, a quickstart video,
training resources, online help, the ProModel Support team, and a whole host of How To videos. It’s easy
to find since it will be the first thing you see when you start up the application.
New Demo Models New demo models have been added and some of our previous demos have been refreshed to include
new graphic libraries, model instructions, and updated logic. View the list of our demo models by clicking
on the Demos button in the Getting Started panel.
New Graphic Libraries The ProModel and MedModel default graphic libraries have been updated with enhanced metafile (EMF)
images. These scale nicely giving you crisp, clear images no matter what zoom level you are at. All the
demo models have been recreated with EMF images as well.
How To Videos Our Support team has been hard at work creating short How To videos to aid our customers in modeling
techniques and other useful tips about how to use our products. We have brought all these videos
together and organized them into one place for you to search and access. Simply click on the How To
Videos button in the Getting Started panel to access them.
Now in Spanish!
ProModel has been translated into the Spanish language. First, run the installation in the Spanish
language in order to ensure all supporting files are included. And then, if your Windows language settings
are in Spanish, ProModel will also run in Spanish.
Enhancements All supported graphic formats can now be rotated and flipped.
Organize logic using the new #region and #endregion statements, which allow you to collapse whole
sections of logic.
The Views panel can be set to display at the start of simulation by checking the option in the
Simulation Options dialog.
Array import using Excel has been optimized to populate data faster when the same file is used to
initialize several arrays.
Strings written out to text files using Write and Writeline statements now have the quotes removed.
Fixes Changing an entity spot to an alignment spot in the Graphic Editor while the layout was zoomed
other than 100% would cause the alignment spot to be drawn in a different spot.
After adding an entity spot to a graphic in the Graphic Editor, you could only move the entity once.
Fixed a couple issues related to shift carryover, one of which prevented a resource from being freed
in a Move With Then Free statement if that resource was preempted to go on a break before arriving
to fulfill a move assignment from another resource that had been preempted for shift carryover.
If an entity was renamed to an entity that had no graphic defined, the application would crash if the
renamed entity then attempted to move with a resource.
Error flagging an undefined entity when reading an external arrival file now lists the row number in
the file where the invalid entity is located.
In some cases, the application would crash if the array import details did not specify an end cell.
The move time was being ignored in the statement “Move With <resource> For <time> Then Free” if
the resource was already owned by the entity.
If a file was open in Excel when the model attempted to export data to it at the end of the simulation,
no data would be exported and the user would not be alerted. We now display a message.
A crash would occur if a tank location was created but the submodel was not merged into the model.
The Autosave interval in Tools | Options dialog was not being saved if larger than 60.
Number precision was being lost when assigning values from one expression array to another.
Simulation terminated prematurely after the first entity in an arrival immediately exited the system,
even though that arrival event had additional entities to process.
A conveyor with limited capacity was incorrectly accumulating %Wait statistics when an entity was
blocked from moving to the next conveyor because the load area was not cleared.
A crash was occurring during model translation when attempting to catch an error using an attribute
in an activated subroutine.
Fixed a shift carryover issue with dynamic resources originally captured with a Jointly Get statement
that was causing a “Usage Downtime miscarried! Module simdown.cpp line 421” error.
A crash was occurring during simulation at a multi-unit location due to available capacity not being
properly kept track of between entities en route and those actually at the multi-unit location.
Importing data into an array from a SQL 2012 database was not working.
A resource transporting an entity, both without a graphic defined, in some cases was causing the
application to crash or display “CreateCompatibleBitmap” and “SelectObject” errors.
Adding the % character in the Baseline scenario name would cause the application to crash when
simulation was initiated.
Warmup length was not changing between scenario runs if a macro was entered and used as a
scenario parameter.
“Failed to import data” error occurred when importing data into an array with exactly 700 columns of
data.
PMOV and PMCAL files would become corrupted when selecting “No” to overwrite an existing file
during Model Package installation.
“Internal Error: Wait completion event not found” due to an issue with a shift carryover.
A runtime error occurred if the frequency of a downtime was less than or equal to zero.
Some resources that took over work from other resources (due to a shift carryover), in some cases
would not return to their work after being preempted away for a break or other downtime.
A resource was not being properly freed and so the entity would produce a “resource still in use”
error upon exiting. This would occur when completing its work after the resource was preempted
away and used in another resource’s downtime logic.
A “resource can’t be freed” error would occur is a specific situation related to shift carryover and
other downtimes waiting to occur.
An “Internal Error: Preempted event type mismatched” error occurred when an entity routed to a
location with a preemptive priority (and preempted the location) while at the same time a shift
carryover attempted to interrupt the resource carrying the entity.
Model crashed while stepping through the Trace window due to an invalid internal unit reference of a
resource being used at another resource’s downtime.
Opening a model with external files in the Silver Runtime edition would sometimes give an error
stating that an external file was changed.
Includes Output Viewer 4.5.0.1205 containing the following enhancements and fixes:
When a Report tab is created by adding a new chart, the name of the Report tab is based on the chart
type added.
A Cumulative Line option has been added to Histogram charts.
Units in a Resource Usage chart were not being updated to select additional units introduced in new
scenarios. Existing PMOV files must be resaved for these changes to take effect.
New options for Tables in Output Viewer allow you to change the font and font size, bold the column
headers, and center justify the columns of data.
Log statement labels containing a dash “-“ in the name would truncate the characters to the right of
the dash.
The title of a Location State time series chart was displaying the incorrect replication number.
“ChartFX Expired” message was displayed in place of charts.
2011 SP4 (November 2012) – 8.6.2.1036
Enhancements
Upload to ProModel Cloud ProModel Cloud is our new web-based enterprise application. Upload models and then create and run
scenarios in ProModel Cloud. Scenarios are run simultaneously while the results from all models can be
compared and analyzed in one central location in Reports. Easily create report dashboards specific to your
business KPIs and share them with others. There is nothing to install as ProModel Cloud is accessed from
anywhere through an internet browser. It can be hosted on premise or in the cloud and serves as a single
unifying environment for predictive analytic collaboration across the organization.
Improvement in resource requirements analysis We now allow the number of units specified in a Use request to exceed the total number of units defined
for a given resource. This allows you to create scenarios with fewer resources than a task or activity
requires, thus effectively extending the overall time a task takes to complete. Compare these with other
scenarios of varying resource quantities and analyze the effect on the overall process initiatives.
Compatible with Windows 8 This release has been tested and verified to install and run on the Microsoft Windows 8 operating system.
Fixes The Find and the Find and Replace dialogs were launching the wrong help topic.
The Help button in the Print Layout dialog would not open the help topic.
Attempting to cancel a change to the font for a variable counter or location label would still apply the
changes.
Trying to create a model package with the Protect Model Data option checked would not work if the
Windows UAC was turned on.
“Internal Error: Resource type mismatched in simlogic:::Graphic() module. \simlogic.cpp Line 1914”
would occur if a static resource (i.e. no path network defined) with three units only had two Layout
Positions defined (i.e. Resource Points) and a Graphic statement was called to change the graphic of
the third unit.
A combination of capturing a resource through a GET, capturing two units of another resource in a
USE, and then all resources being preempted for shift carryover could produce a unique situation
where a shift carryover would not be fulfilled.
A crash would happen if two resources owned by an entity were initially unavailable to be preempted
for shift carryover and then were later preempted for shift carryover once the entity was in a
preemptable state. If only one resource resumed one of the shift carryover preemptions, the crash
would occur.
A crash could potentially happen in a unique situation where multiple resources were captured
through first a GET and then a USE, where some of the resources were preempted away while others
were preempted for shift carryover and still other resources were not yet captured.
A Microsoft Operating System update for Daylight Saving Time (see Knowledge Base article
KB2633952) prevented some models from running in the Silver Runtime version. An error would
occur stating that an external file was modified and so the model cannot be simulated.
Simulation results were not being written out to the path specified in the Simulation Options dialog.
If resources were transferred to another entity through an Ungroup or a Create Take statement, a
problem could occur later for those resources when executing a shift carryover.
Scenario manager was not accepting numbers consistently like the rest of the ProModel application.
Specifically, periods as decimals in real numbers.
Tanks were still filling and emptying even though they were on a downtime, if the tanks were
designated as the Tank_To tank in tank transfer functions.
In a certain situation while executing a shift carryover, a “Wait completion event not found” error
would occur.
A static resource (one not assigned to a path network) with no graphic selected for it would cause a
crash at simulation time if that resource had a Resource Point defined.
Includes Output Viewer 4.3.2.952 containing the following fixes: Histogram bar width and Statistics options were not being saved in the Portuguese version.
Percentile fields for Histograms were not showing up when viewing in Portuguese.
Some strings in the ribbon were coming up in English when viewing in Portuguese.
Entity states data was showing up blank if some of the entity types did not exit during simulation.
Saving a chart with a blank x-axis title caused the application to crash when opening Output Viewer.
A “Failed to Export error: Object reference not set to an instance of an object” error occurred in
some cases when exporting chart data to Excel.
Changing the model default time units caused Entity summary columns to not display.
If the pmov file somehow got corrupted it could cause the application to crash when attempting to
read the time series results file.
2011 SP3 (April 2012) – 8.6.1.996
Enhancements Shift carryover properly executes for resources captured by entities in the middle of unfulfilled logic
delay statements such as Wait Until, Accum, Combine, Group, Join, Load, and Match.
Fixes In the Brazil time zone, a change from Standard to Daylight Saving Time would cause the CalHour()
function to be off by an hour for a 24 hour period.
Resources scheduled to change shifts during the hour of a Daylight Saving Time change were off by
one hour; they either produced an hour gap or overlapped by an hour.
Resources scheduled to take a break during the hour change from Standard to Daylight Saving Time
(DST) were not coming back online again.
Scheduling a User Pause that crosses a DST change would sometimes cause the pause to occur an
hour before or after the specified time.
Breaks scheduled to occur during the “dead” hour of DST (i.e. when changing from Standard to DST,
this is the time from 2 am to 3 am that is skipped) are now ignored.
Simulation Options dialog was automatically adjusting the Calendar Date start and end times if one or
more were set during the “dead” hour of DST. Now you are prompted to change it.
Simulation Options dialog would not remain open if an error message occurred (due to an invalid
entry) after clicking OK or Run.
A resource was incorrectly being freed after a Move With (and keep) if the original resource was
preempted away for a shift carryover while traveling to fulfill the Move With.
Entities moving on a queue or conveyor with captured resources would cause a crash if the resources
were attempted to be preempted away for shift carryover.
An entity that requested 2 or more units of the same resource and was not able to capture all units,
would later cause a crash when capturing the other units if the originally captured units had been
preempted away for shift carryover.
A crash occurred in a unique situation where multiple units of the same resource were preempted
away for Shift Carryover at the same time and other units were not immediately available to fulfill the
shift carryover.
The caption in the Logic Builder for an Expression was displaying “??????”.
The caption for the message asking you if you want to copy saved reports and results during a Save
As, has been changed from a warning to more informative text.
If you opened Scenario Manager when no scenarios existed and clicked the Ok button rather than
Cancel, you were prompted that scenario results would be deleted (even though none existed).
A scenario wouldn’t appear to delete if no parameters existed.
Attempting to delete a scenario before a model is saved for the first time could lead to an application
failure.
Includes Output Viewer 4.3.1.931 containing the following fixes: When a resource utilization chart was grouped by scenario, the resource units didn’t match the
scenario displayed in the chart.
Sorting of data in charts containing scenarios with varying numbers of resource units, was not taking
into account that some scenarios may not have data for a particular unit.
Time Plot time series charts were showing incorrect x-axis label times when the model had a warmup
period and the data was being summarized.
The Entity Count time series chart was showing incorrect weekly x-axis labels when the model had a
warmup period and the data was being summarized with a weekly interval.
The Entity State chart would show the states adding up to less than 100% if any of the replications
had zero exits for the selected entity type.
2011 SP2 (December 2011) – 8.6.0.963
Enhancements Resource Shift Carryover extended to Use statement – this powerful capability, introduced in the
last release, has been expanded to include resources captured with a Use statement. It enables you
to carryover work started by a resource on one shift and continue it with another unit on the next
shift. For example, hospitals operating 24 hours a day can transfer patient care from one shift to the
next.
Output report views and results copied with new model – when saving an existing model as a
different name, if that model also has saved Output Viewer report views, you will be prompted and
given the choice to copy the saved report views and any results files with the new model name.
Charts linked in Output Viewer report views – charts are now automatically linked together if they
exist in the same report tab. This means that when you add or remove a scenario from one chart, all
other charts will have that scenario added or removed as well. Other Filter Options can also be linked
and, if desired, charts can be unlinked so that changes only apply to the selected chart.
Output Viewer Items sorted in original model order – Filter Options now show all elements in the
Items list in the order they appear in the model tables. This is now the default Item sort, however, the
list can also be sorted alphabetically.
Scenario differences highlighted – in the Scenario Manager, you can visually identify which
parameter values are different than the baseline values. Any differences are changed to a blue color
and given a bold emphasis.
Use Google SketchUp 3D graphics with 3D Animator! – Google SketchUp has thousands of free 3D
graphics. We’ve created a plug-in for SketchUp that will allow you to properly export its graphics to
3D Animator.
Move a chart and create a new Report – if you want to move an existing chart into its own new
Report tab, simply drag the chart up to the plus “+” tab and drop it there. A new Report tab will
automatically be created with your chart in the view.
External Arrival and Entity-Location files now support the .xlsm and .xlsb Excel file formats.
After installing a 3D Animator package file, you are now prompted to load the setup file.
Output Viewer and 3D Animator now have context-sensitive online help.
Fixes Location status lights would show as idle after panning during simulation.
Resources captured with a Get or Jointly Get that already arrived at the location would not initiate a
shift carryover if another one of the resources was still en route and was preempted away to go off
shift.
Incorrect reporting of %Waiting statistics for an entity if one of multiple resources captured by an
entity with a USE statement was preempted during the USE.
Output results were not being deleted when a scenario was renamed or deleted unless an Output
Viewer reports (.pmov) file existed for the model.
The Conveyor Only properties of an entity would take on the properties of a previous entity you were
editing.
A “No scenarios defined” error was encountered if attempting to simulate scenarios even though the
baseline scenario existed.
The error “Unknown class. Missing type qualifier” was encountered when opening 3D Animator if a
resource graphic was deleted in the model and then synchronized with an existing setup file (.sup).
The Search Next (F3) functionality in the Expression Search would stop working after encountering an
instance of the word in the list of locations or resources in Shift Assignments.
An entity being accumulated at a location was starting a new “accum” group (instead of associating
with an existing accum group) if it was routed to another processing record for the same location.
Context-sensitive F1 help was not invoking the online help for Initialization and Termination logic.
Online help was not coming up for Scenario Manager and Six Sigma window help buttons for
MedModel and ServiceModel products.
The online help error “404 – File or directory not found” was encountered when pressing F1 with the
Operation Logic window active.
A resource preempted away from its own downtime, would cause the application to crash if it
attempted to capture another resource after having resumed its downtime.
In some models where locations had no associated graphics, the application would crash when
moving all graphics at once.
In a specific case where a location Entry downtime also captured resources, the application would
crash if attempting to take that same location off shift.
On Windows XP, SimRunner would cause the application to terminate if the experiments or
replications produced large amounts of output data.
A “Wait completion event not found” error was occurring when a resource attempted to execute a
downtime. This was the result of multiple resources being captured by an entity and some of its
resources initiating a shift carryover while others were preempted to go off shift.
A shift carryover resource was not properly being freed if the resource it replaced on the previous
shift was preempted to go off shift as it was traveling to the entity that requested it.
The animation in 3D Animator would incorrectly resume after clicking OK to a Pause event that
contained a message.
Other windows applications would move in front of 3D Animator after browsing and selecting an
external file (e.g. a movie file).
Attempting to flood fill copy the <default> font for Labels in 3D Animator wasn’t working.
Double-clicking a .sup file was not loading the setup file into 3D Animator if it was already open.
Copying and pasting a row of data for Background Graphics in 3D Animator was not pasting the scale
and rotation fields.
Entering a space in some fields of a 3D Animator table would clear out the subsequent values in that
row of the table.
Attempting to save a 3D Animator setup file into a non-write accessible directory, caused an
unhandled exception.
Changed the 3D Animator Navigation option label from “strafe” to “move”.
Some actions in 3D Animator would require you to select undo twice in order to undo a change.
In 3D Animator, pausing an animation and then attempting to click on the layout would cause the
application to freeze.
Flood fill copy was not working for the Graphic filename column for the tables in the Objects section
in 3D Animator. It was attempting to give the files unique names instead of copying.
Includes Output Viewer 4.3.0.924 containing the following fixes: Output results with a long warmup period (e.g. 5 months) were plotting negative time values.
The ribbon wasn’t displaying properly if the Windows 7 font text was anything other than 100%.
For Table charts, Time Unit choices in the Options section of the Filter Options panel now only display
if they are applicable to the table.
Double-clicking on an RDB file that is compressed in a ZIP file would produce an error when it
attempted to open in Output Viewer.
When adding a table, if only one scenario is selected in the Filter Options, then the table is displayed
with the scenario column hidden.
Sorting a table by clicking a column header and then changing the time units caused an exception.
Double-clicking the splitter on the Filter Options panel will collapse and expand the panel.
2011 SP1 (June 2011) – 8.5.1.858
Fixes Editing a parameter value in Scenario Manager and then scrolling right or left before committing the
change would put the Scenario Manager in a state where you couldn’t commit the change.
Array Import and Export dialog help now takes you directly their respective help topics.
A “404 – File or directory not found” error for online help was encountered when clicking the help
button in the Parameter Definitions dialog.
Scenario parameters with names that were included in other scenario parameter names (e.g. “Cycle
time Loc1” and “Cycle time Loc10”) would push changes to both parameters. Sometimes this
appeared as if parameter values were being overwritten or not saved.
Renaming scenarios in the Scenario Manager was not removing the scenario results nor updating the
scenario names for saved reports in Output Viewer.
Changing the Run Name in Simulation Options was not updating the name for saved reports in
Output Viewer.
A model built prior to version 2011 that had Model Parameters defined with any of the parameter
values set to the default macro text, would crash the application when opening the Scenario
Manager.
Saving a model as version 7.0 or 8.0 would throw an “Invalid file format” error when attempting to
open the saved model in version 7.5 or 2010.
In certain models, executing a search was not finding the search text and a search and replace would
crash the application.
On a 32-bit OS, going to the entities module when it contains no entities and then clicking on the
Layout would crash the application.
ProModel 2011 release (May 2011) – 8.5.0.847
Features Resource Shift Carryover – this powerful new capability allows you to carryover work started by a
resource on one shift and continue it with another unit of that resource on the next. For example,
manufacturing facilities that have extended task times or complex processes spanning multiple shifts
or days can easily pass work from the first to the second shift. Hospitals operating 24 hours a day can
transfer patient care from one shift to the next. Shift carryover works whether it’s one resource or
multiple resources performing a task. Each resource will independently be interrupted to go off shift
and allow resources on the next shift to resume the work. Shift carryover currently works for
resources captured by a Get, Jointly Get, and Move With statement.
New .NET Scenario Manager – the new scenario manager makes adding, modifying, and managing
your scenarios a snap. The open interface displays all of your scenarios and their parameter values in
one simple table. Each column of the table is a separate scenario where values can be quickly
compared side by side between scenarios. All of this now makes your scenario analysis more
straightforward and streamlined. (Note: RTI macros have been changed to Scenario Parameter
macros to coincide with the new Scenario Manager.)
New Output Viewer time series charts – we are excited to introduce the following new and modified
time series charts:
Location Utilization – this new chart displays utilization of locations, as a percentage of
contents versus overall capacity, over the course of the simulation run.
Resource Usage – this new chart shows how many resources were used and when over the
course of the simulation. Add a capacity line to the chart and compare the actual usage
against the maximum potential resource usage. In order for existing models to generate this
report, resources need to have Time Series selected for their statistics in the Resource edit
table.
Location State – this upgraded chart now includes the averaging of location states across
replications. It is displayed as a 100% stacked column Gantt chart over time.
Enhancements Simulate Scenarios – now you can initiate the running of your scenarios without opening the scenario
manager. Quickly simulate your scenarios by choosing Simulate Scenarios from the Simulation menu
or toolbar.
Package installation directory – when a package is installed, the suggested directory to install it into
now points to the same directory where the package file exists.
Standardized hot keys – we now use the standard hot keys Ctrl+O and Ctrl+S for File Open and File
Save actions, respectively. We also now use Ctrl+A for Select All functionality in tables and logic
windows. This means that we had to change the hot keys for accessing the Subroutines (formerly
Ctrl+S) and Arrivals (formerly Ctrl+A) modules, to be Ctrl+U and Ctrl+I, respectively.
Double-click to select element name – all element names, locations, entities, variables, subroutines,
etc., are selected when double-clicking on them in their respective edit tables. This enables quick
access for copying of the names.
Data Grouping Interval for Statistic series – when viewing the raw data for time series charts, you
can now set the grouping interval if Statistic series are added to the chart.
Pooling time series statistics – Time Plot charts now have a pooling option that allows you to
combine the values of the Items selected and display their joint average in the chart. Series for
Statistics are also automatically pooled for all items selected and show as one joint Statistic, if the
chart type has been set to stacked.
Fixes Installation was not installing the .NET 4.0 framework on Windows XP 64-bit.
In an isolated case, attempting to use the Debugger during simulation caused the application to
crash.
Merging two resources using Model Collaborator would not properly create a shift assignment for the
resulting resource (list would be blank) and cause the application to crash when simulated.
Both the Query and Stored Procedure options would be selected in the Array Imports dialog when
reopening the dialog after Stored Procedures had been chosen and saved.
The application would crash when attempting to import an external arrival file whose path and
filename exceeded 164 characters.
Normal Run was not being translated to “Execução Normal” for a model built in 7.5 or earlier and run
in 8.0. This caused saved views in 3DR to not display any data for that scenario.
Time-based path networks were not getting their shortest distance mappings properly calculated.
A Crane resource was not immediately being reclaimed if it was temporarily freed by the entity using
it (because the entity was preempted), and had started moving to a downtime node.
A memory leak was occurring when displaying a resource utilization dynamic plot.
Changing the PMCAL file for an existing Shift Assignment would appear to keep the old PMCAL file,
but was actually an issue with the table not properly refreshing to reflect the change.
Changing the Date/Time setting for the simulation clock (to show in hours, for example) would cause
the date-based functions CalHour, CalMin, CalDay, etc. to stop working.
Having “Adjust for Daylight Saving Time” checked in Simulation Options, even though it was disabled,
was incorrectly affecting simulations run in Weekly Time.
The hotkeys for changing views during simulation would not work sometimes.
Resources using an EMF graphic in a model built in 7.5, would disappear during simulation when run
in 8.0.
If the simulation ended during a warmup period, the initial value for location contents was not being
reported.
An error was thrown “Out of memory. Try reducing memory usage by simplifying your model (i.e. size
of Arrays, number of Entities, etc.) or closing other applications” when a model was loaded that had
corrupted background bitmaps.
Variable counters sometimes would not display any values during simulation until the first time the
variable changed
Includes Output Viewer 4.2.0.829 containing the following fixes: A scenario containing a period “.” in the name, wouldn’t be properly displayed in the Filter Options
panel.
Series from the Statistics list for time series charts were also being stacked when the chart type was
set as stacked.
Statistics series added to time series charts when Grouping was set to None (i.e. viewing raw
statistics), were not properly being calculated and for Entity Count charts, caused an exception.
Time plot charts wouldn’t properly display data truncation annotations if the simulation ended during
a warmup period.
Warmup period was not properly being accounted for in Entity Count time series charts when the
simulation had been run as Time Only.
Zoom capability in Histogram charts has been disabled due to a crash caused by the third-party
charting component used by Output Viewer.
The dialog for exporting chart data to Excel was not remembering the previous directory data was
exported to.
2010 SP2 (March 2011) – 8.1.0.623
Features Output Viewer 4.1 – this latest version has the following new capability:
Sort Column, Utilization, and State Charts – sort your chart data based on highest or
lowest values. State charts will even let you choose which state should be sorted.
Export Time Series Data – similar to exporting Summary data, you will be able to export
any of your time series results from any scenario to Excel.
Change Chart Type –you will be able to change the chart style from bar to line, from line
to area, from pie to doughnut, etc. Choose from several different chart style options.
Enhancements The simulation end date has been extended beyond the year 2037 to now be 2100.
The scenarios dialog allows you to select or unselect all checkboxes by pressing Shift + left-click.
Gold Runtime versions can now be updated through the Auto-update wizard.
In Output Viewer, pressing Ctrl + left-mouse click will select or deselect all items within a group
of items instead of all items in all groups, for example, in the Items list for Time Plots.
If an item name in the Filter Options pane in Output Viewer is too long that it can’t be viewed
entirely, hovering over the name displays a tooltip displaying the complete name.
In Output Viewer, a tooltip warning is displayed if entering an invalid value into the Custom
Interval Time field for a time series chart.
Histograms now display x axis labels as single values in between bars in Output Viewer instead of
a range of values, which makes the histogram easier to view and interpret.
Zooming and panning performance during model edit and simulation has been optimized.
Fixes
An "Undefined entity in the arrival file" error would occur during simulation initialization if extra
spaces were added to the entity name in the Excel file.
Opening a model and then immediately launching Output Viewer from the menu or toolbar was
not auto-loading pre-existing simulation results into Output Viewer.
Closing the Trace window by using the Trace Off menu item was not keeping the simulation
paused.
License Manager was not in the Tools menu if the application was licensed with a hardware key.
Spaces were not being allowed in the Dimensions field in the Arrays table.
If exporting array data to an XLS file, upon opening the file in Excel 2007 or 2010, a warning
message would be displayed.
The Cancel button for the Path Color dialog for Path Networks was not actually canceling.
The Graphic Editor would save changes to a graphic library file (GLB) even though the file was
marked as read only.
Includes Output Viewer 4.1.0.633 containing the following fixes:
Application crashed upon attempting to create a time series chart if the data file (RDT) was very
large (~4 GB).
When viewing individual replication data series for Histograms, if additional Statistics were
displayed they were showing for each replication rather than summarized for all reps.
Time Plots were not displaying the correct start time for Time Only and Weekly based
simulations with a warmup lasting longer than a week.
Histograms would not display negative data values.
Excel would not properly chart exported Output Viewer data due to the way it was formatted
during export.
When turning on annotations, in some cases they wouldn’t display until the chart was modified
through the Filter Options.
If a simulation had a warmup period and ran multiple replications, the Entity Count chart when
averaging the replications would incorrectly chart the data at the time the simulation started
instead of the end of the warmup period.
Changing the decimal precision for a chart’s Data Table would revert back to original precision if
a series item was added or removed from the chart through the Filter Options.
When editing a Report View title, the options in the right-click context sensitive menu (Cut, Copy,
and Paste) didn’t work.
The Filter Options pane would force the names of items to start with the initial character
capitalized and the remainder of the characters to be lower case.
A “Failed to generate filter options” error would occur upon loading Output Viewer if a variable
name and a Log stat had the same name.
Creating a Single Capacity Location Pie chart and then adding another scenario in which the
selected location is a multi-capacity location caused an error.
Resource state and Multi-Capacity Location state charts would have no title if the items selected
in the Filter had no data.
In some cases, the Node Entries – Blocked Entries Column chart could display blocked entries for
the wrong node.
2010 SP1 (January 2011) – 8.0.1.566
Fixes A Tank location contents incorrectly appeared as zero in a Time Plot chart immediately after a
warmup until a change in the contents occurred.
Sentinel USB key drivers were not being installed with the Portuguese Professional install.
In some cases a resource shift time was off by one second.
A resource wouldn’t exactly follow its assigned Calendar shift or would go off shift and not come
back on shift if a warmup time was specified for the model.
A change to the Output Path in the Simulation Options dialog was not persisting.
Status Light legend would only open and display in the primary monitor.
The error “Couldn’t save array export file <file path and name>. The file may already be in use or
may have read-only attributes” was thrown if attempting to export array data to Excel 2003.
License Manager may have crashed when accessing it if ProModel 7.5 was installed prior to
version 8.0 and was licensed with a software key.
Deleting a row in the table in the Six Sigma Configuration dialog would delete all the rows after it.
When selecting Database as the array import Source, in the Array Import File dialog, no option
was being selected by default for the “Access Data by:” option.
A scenario name with a % character would crash the application when running scenarios.
An array import error would occur if no End cell was defined in the array Excel Import dialog.
A version 7.5 model would crash upon loading in version 8.0 if a shift assignment record was
defined but no shift file was specified.
Includes Output Viewer version 4.0.1.503 containing the following fixes:
The time to load charts was optimized to be faster.
In a Time Plot chart, the averaged data point plotted immediately following a warmup period
was not being properly prorated if it did not fall exactly on the grouping interval boundary.
In a Time Plot chart, a Grouping option of None was incorrectly listed after an additional Scenario
was selected even though Replications were set to Average.
The application would generate an error or possibly crash if a saved report view contained a
Table chart with sorting options set.
Entity Count charts did not plot the starting data point on the correct day if the simulation was
run as Weekly Time and started on a Sunday.
The Periodic Sum for Entity Count charts was not summing correctly when more than one entity
was selected in the Items filter.
Exporting Location State time series data for simulations run as Weekly time would incorrectly
log the time values as one daily earlier than the actual times.
Sometimes when viewing a report, some of the charts would be blank until you viewed a
different report and then came back to the original.
In the Format ribbon tab, clearing out the Font name and then pressing Enter would cause the
application to crash.
Upon starting the application, a “Failed to generate filter options” error occurred because a
variable had been named the same as a location time series item name.
Maximizing and restoring chart windows sometimes would cause the application to move behind
all other open application windows.
Data exported from a Histogram chart would display in Excel with some cell errors.
In some cases, zooming in on a Time Plot chart could cause the application to lock up.
For Entity Count charts, x axis labels were showing duplicated times when crossing the Daylight
Saving Time change.
In some cases exporting histogram chart data caused a “Failed to Export” error.
Increasing the font size of the Data Labels using the up arrow button in the context sensitive
Format ribbon caused the application to crash.
ProModel 2010 release (November 2010) – 8.0.0.557
Features Six Sigma Analysis with integration to Minitab – select which variable statistic you want to do a Six
Sigma analysis on in your model, run the simulation, and Minitab will automatically open and create
Capability Analysis and Capability Sixpack charts. Because the simulation data is populated in
Minitab’s spreadsheets, further Minitab tests and analysis can be performed.
Output Viewer 4.0 – developed in the latest Microsoft WPF technology, the new output viewer
simplifies the creation of views, provides quicker and more open access for modifying charts and
tables, and allows for analysis and comparison of multiple output data sources. The new user
interface follows the Microsoft fluent UI standard and uses a ribbon for providing access to all the
reporting functionality.
Independent Scenarios– coupled with the capability introduced in the new Output Viewer, you can
run new scenarios independently of each other and compare their results side by side with previously
simulated scenarios.
Calendars – definition of shifts and time off (holiday, vacation, etc.) for locations and resources is
now done using the new .NET Calendar Editor. It expands upon the previous Shift Editor and provides
a more accurate and intuitive way for scheduling resource availability.
Additional graphic formats supported – JPG, TIFF, PNG, ICO and GIF89a with transparency.
Optimized path network mapping algorithm – the method for finding the shortest path between two
nodes in a path network now uses the Floyd-Warshall algorithm. For those of you with huge path
networks, we’ve just saved you some time!
Recompile path network mappings between scenarios – path distances or times can be
modified between scenarios for comparing the effect of different resource routes.
Excel 2010 support – for Array import and external Arrival and Entity-Location files.
Online Help System – gives you access to the latest documentation…all the time.
Windows 7 Certified – release 2010 is officially compatible with Windows 7!
Enhancements Time series statistical data querying has been optimized so that data from larger RDT files can be read
and displayed in the new Output Viewer.
Scenario parameter values are included in the Simulation Info table in the Output Viewer.
Scenarios can now be enabled or disabled through a checkbox user interface element.
Hardware Key Number or Serial Number can be entered during installation and is used during the
licensing process and displayed in the Help | About dialog for easy access.
Accelerator keys have been added for Background Graphics Behind Grid (Ctrl+G) and Reset Window
Positions (Ctrl+W).
The standard “Normal Run” simulation run has been renamed to “Baseline” and can be modified
through the Simulation Options dialog.
Array import database filepath is now automatically updated when a model package is installed.
DTLength – a new system function that returns the length of an off-shift and break downtime. (DTLeft
has been changed to return the remaining length of an off-shift or break downtime.)
Fixes
In certain cases, an entity waiting for resources requested through a JOINTLY GET statement could
have captured those resources before another entity that had been waiting longer.
The CalHour and CalMin functions were not returning the proper values for replications two and
higher if they were used in the Initial Value field of variables.
Expression array would not import properly if a start cell was specified but not the end cell.
A “Usage downtime miscarried” error occurred in certain cases involving simultaneous preemptive
location downtimes.
A pending preemptive location downtime would not preempt an entity after the entity’s resources
returned from performing other tasks. The resources were performing these tasks because they had
been freed due to the entity being preempted by another event.
Routing to specific units of a multi-unit location, using the Load rule, at some point would stop
routing entities to most of the units.
An off-shift downtime was being skipped if a break downtime ran over into the off-shift period and
“Skip Res DTs if off-shift” was selected in Simulation Options.
Immediately after initiating a simulation run, the application would return back to edit mode. This
was caused by an arrival record that referenced an arrival cycle and also had variation, offset, or daily
or weekly repetition defined in the First Time arrivals dialog. Now an error message appears.
The application would crash in a specific case where a dynamic resource was captured by an entity,
the entity then moved to a location (not using the resource to perform the move) where there was
no interface for the resource at that location, and then the resource was preempted by a downtime.
A pending location Entry downtime would occur prematurely if a preemptive Usage downtime
interrupted the currently processing entity.
Reporting and Termination events were not occurring in this order: Periodic report, Warmup reset,
Termination event. This caused some inconsistencies in statistical reporting.
The application would lock up if around 64 KB of text was contained in a logic window and it was
compiled.
In certain cases with multi-unit locations, the available capacity was not properly decrementing and
thus putting a unit of the location in a state where entities would not arrive or preemption would not
occur.
Multiple Load routings to the same destination location in a routing block would cause the Loads not
to occur properly.
When running a simulation with Common Random Numbers, seed values were not properly being
reset after 200 replications.
The PercentUtil function was only returning a valid result during the warmup period if the model ran
with warmup.
In some cases, if a resource returning to an entity it was preempted away from is again preempted
before completely returning, would never return to that entity.
The application would crash if attempting to install a model package in which the fully qualified path
exceeded 252 characters. An “Unable to create file” error now occurs.
In certain cases, a JOINTLY GET statement could preempt a resource while trying to determine if it
could capture one of its requested set of resources and then capture a set of resources that did not
include the preempted resource.
The application crashed if a resource owned by a joining entity was preempted after the entity joined
the base entity and transferred the resource.
Implicitly creating an entity (utilizing a Route statement in Operation logic) would put the location in
a non-preemptable state.
The Simulation Layout window would not refresh properly if the application window was resized to
extend beyond an individual monitor’s screen resolution (i.e. extending the window across multiple
monitors).
Selecting “No” to the “Do you want to see the results?” message at the end of simulation no longer
exports array data.
If the Graphic Editor program was moved to a secondary monitor and then closed, upon reopening it
the application window size would very small.
An application crash would occur if an image was added as the second graphic for an entity when no
graphic existed for its first graphic.
Gradient fill was not being properly rendered during simulation.
The order of days listed in Weekly Time dialogs was inconsistent with the order used by the
simulation engine. Sunday was listed first when Monday should have been.
Right-clicking in the Import or Export field for an array would open the Logic Builder.
The View menu would be grayed out if the Layout window was maximized before running a
simulation.
Exporting array data to an Excel file that contains VBA code in the Workbook_Open method, for
example, would generate a “file already exists in this location” error.
An “InsertGraphicToList” error would occur if a Continue routing rule was used at a Queue location.
A runtime error was not occurring if an entity was being split into its same entity type. The resulting
split entities should be a different entity type than the entity it is splitting from.
Time-based path networks were not using the time values to determine shortest distance between
destinations.
Compiling logic that contained a User Distribution which did not add up to 100% would produce a
misleading error message about an undefined identifier.
Performing a Search or Replace would not search the array database connection strings.
If a week number greater than 52 was entered into the Simulation End week number field, the next
time the week number drop-down list was accessed, it would be blank.
A delayed routing to a specific unit of a multi-unit location by a Send, Join, or Load rule caused the
routing entity properly initiate the route but it would never actually arrive at the specific unit.
The Logic Builder now enforces the SAVE AS statement.
The RESOURCE() system function was incorrectly showing up in the Logic Builder for Node Entry,
Node Exit, Operation, Move, Arrival, and Macro logic.
Number of characters allowed in Warmup Time, Run Time, and Number of Replications fields in
Simulation Options dialog has been increased to allow for longer macro names.
Cost statistics collection is now enabled by default for new models.
Even though Cost statistics were disabled in Simulation Options, if cost statements or functions were
used in logic incomplete cost statistics would still show up in Cost tables.
Axis zoom settings were not being saved with dynamic plot configuration.
Changing the text of a label in a dynamic plot was not being saved.
Resources would remain blocked on a path network behind a node with its capacity set to one.
Specifying a resource unit as part of a dynamic plot was not being saved.
Resource Utilization of a parent resource displayed in a dynamic plot during simulation was not
graphing the correct values.
In some cases, multi-capacity locations with preemptive downtimes that got delayed (due to the
location being in a non-preemptive state) were not being preempted when they finally got into a
preemptive state.
At a multi-capacity location, if a resource was preempted away from an entity and a location
downtime was waiting to occur, the downtime would incorrectly be allowed to take the location
down even though it was in a non-preemptable state, which resulted in an application error.
During simulation, zooming in beyond a factor of 1000% was causing “CreateCompatibleBitmap”
errors.
Priorities for a Crane in a MOVE WITH statement were not being considered if the Crane had been
captured previously by the entity and then used to perform the MOVE WITH.
Merging a model with an External File specified with a relative path would be replaced with an
UNKNOWN.xxx in the resulting merged model and cause an error at runtime.
7.5.5.374 (November 2009)
Fixes In rare cases, during simulation the application would fail to find the USB key and force the
application to be closed, prompting first for a model save.
Resource State statistics were incorrect if the simulation was ended while any Resources were
blocked during travel due to the capacity of the next node in its path being full.
Data imported from files created in Excel 2007 (using the Excel Import option for Array Import) were
limited to the Excel 2003 limit of 256 columns by 65556 rows. Now with Excel 2007 files, you are only
limited by the amount of memory that your Windows Operating System can allocate.
The application crashed when the mouse cursor was moved over the Layout window if the resource
Points window was open for a static resource.
A resource per use cost was incorrectly added to an entity’s overall cost when the resource was
preempted away and then returned to resume processing the entity.
7.5.4.373 (August 2009)
Fixes Crane rail and bridge end coordinates for a Crane network were not readjusting their values when
resized even though "Recalculate path lengths when adjusted" was checked in the Options.
The application would crash during simulation after a preempted conveyor or queue came back
online and attempted to regain a resource.
The application would crash at the end of simulation if it ended when a location or resource was
executing a shift that was completely blank (i.e. no work was defined).
Includes 3DR version 2.0.14.106 containing the following fixes:
The hotkey to invoke the Histogram creation dialog was Ctrl+V and conflicted with the standard
Windows hotkey to paste contents from the Clipboard.
Failed arrival records showing zero failed arrivals no longer are included in the table.
7.5.3.364 (April 2009)
Enhancements Optimized the memory management of entities and attributes during simulation so that less memory
is needed.
Fixes If ProModel 7.5.2 was installed after Process Simulator 2009 (version 6.0), the 3DR Output Viewer
would not run properly.
In some cases, an application crash would occur if a crane attempted to pick up another entity
without moving from the position it was currently in.
In some cases, a non-preemptive resource off-shift downtime caused the application to crash when
the resource executed a USE statement before going off-shift.
A location or resource would remain on-shift when it was supposed to go off-shift. This occurred
when changing from one shift file to another if the current shift file had work defined at the time the
next shift file (in the shift list) was scheduled to start but had no work defined at that time.
The debugger would stop working for a grouped entity that did not use the AS option in the GROUP
statement.
In a specific case, an entity would not move to the end of a conveyor. This would occur if another
entity would reach the end of the conveyor and leave before the entity in question completed its
WAIT statement at the beginning of the conveyor.
Includes 3DR version 2.0.13.104 containing the following fixes:
Changing the value of the Average/Total data by period for an existing time series plot would reset
the custom zoom settings without being warned.
Placing a “:” in the name of a View prevented the saved view from being displayed and if deleted
would cause 3DR to crash.
7.5.2.317 (February 2009)
Fixes Setup statistics (found on the Setup tab of the General report in 3DR) were not being cleared at the
end of a warmup period.
Importing a background graphic with a path and filename greater than 126 characters was causing
the application to crash.
In certain cases, the Wait Until statement was not processing the entities in the same order as
previous versions.
When a Wait Until statement was used after a MOVE statement in Move Logic, the simulation would
crash.
Background text objects were disappearing when attempting to move them along with other object
types (e.g. variable counters).
In background graphics when panning using the hot keys (Ctrl + Shift + Right-click) the right-click
menu would appear upon ending the panning.
Defining arrays with more than 200 million cells was causing the application to crash when the
simulation was started.
When creating, splitting, unloading or ungrouping entities at a single capacity location (i.e. allowing
temporary multi-capacity) the status light was not in sync with what the location state over time
chart was showing in 3DR.
When creating, splitting, unloading or ungrouping entities at a single capacity location (i.e. allowing
temporary multi-capacity) the state of the location was not being consistently set. The priority for
setting the state is given to entities processing Operation logic, then to entities Blocked in routing,
and lastly to entities executing Move logic.
Batches and Periods were numbered differently if a simulation run had a warmup that was defined in
Simulation Properties versus using the Warmup statement in logic.
Includes 3DR version 2.0.12.103 containing the following fixes:
Total time in use is now collected for Resources and is reported as Work Time.
A database conversion error “File conversion error in ‘Getting Period Data’ section of the file” would
occur if a space was included at the end of the report name parameter in the REPORT AS statement.
Chart properties like the zoom or x axis time unit were being automatically reset when modifying the
chart items. Now you are prompted whether or not to reset the chart properties.
Batch Mean or Period names in charts (e.g. Location State) were not sorting correctly.
A “No data available” message would appear in a category chart when attempting to graph series for
<All> Periods.
For Batch Mean or Period statistical reporting, the State and Utilization reports were incorrectly
including periods in calculating the average where there was no Scheduled Time reported. This
resulted in a State chart, for example, adding up to less than 100%.
When running multiple replications, an informational/warning message will appear if data in a Time
Series chart (Time-weighted, Simple, or Counts) is truncated to match the replication with the
shortest run length. If all replications have the same run length, no data is truncated.
7.5.1.308 (November 2008)
Enhancements Zooming – Functionality for one-click zooming, zooming to a selected region, and mouse wheel
zooming has been implemented and updated in both Edit and Simulation mode.
o Ctrl + Shift + Left-click – zoom in
o Ctrl + Shift + Right-click – zoom out
o Ctrl + Shift + Left drag – draws a region (or “box”) to zoom into
o Ctrl + Shift + Mouse wheel scroll – zooms in and out
Panning – Functionality to click and drag the layout to pan to different areas of your model has been
added to Edit mode and improved in Simulation mode.
Ctrl + Shift + Right drag – pans the layout
Cursors – Dynamic changes to the mouse cursor have been made throughout the application to
provide visual feedback when you are in different modules graphically manipulating objects (such as
moving or sizing locations) or defining objects (such as path networks and routing).
Fixes The Trace option in Simulation Options has been added to the ActiveX interface as Field ID 43.
In the Portuguese version the Array Information window viewable during simulation was not
resizable.
In foreign language versions of the product, buttons in the Logic Builder were missing.
Search and Undo buttons in the Edit Logic window, which can be invoked to fix logic compiler errors
during simulation translation, were not working.
Buttons and other parts of the interface would turn black and would not reset unless the application
was restarted.
Clicking the Compile button in Initialization or Termination Logic would set the cursor to the first line
in logic rather than staying on the line it was on before compiling.
Background graphics would disappear, if Snap to Grid was turned on, when moved to the top left
corner of the Layout.
Graphics would disappear in the Graphic Editor if moved to the top left corner of the Layout.
Merging nodes in Path Networks didn’t always work.
Using the mouse scroll wheel or keyboard down arrow, several Attribute, Array, Subroutine, or Macro
records could be mistakenly created.
You could not delete the last remaining Attribute, Array, Subroutine, or Macro record.
Could not change the color of an EMF graphic after selecting it for an Entity, Resource, or Location.
In some models where an entity activated a subroutine and then executed a WAIT UNTIL statement,
the entity could mistakenly assume the attribute values of a different entity.
If multiple LOAD statements were executed at the same location (in particular, when the location
state does not change between LOAD statement executions), the IN <time> timeout value would only
be triggered for the first LOAD statement executed.
In some cases where a resource has a downtime and requests the use of another resource during the
downtime, if the captured resource is preempted away, when it returns to resume being used in the
downtime the application may have crashed.
7.5 Release (August 2008)
Features Model Collaborator – not only gives modeling teams the ability to independently work on different
sections of a more global model and then bring the individual models together to be simulated, it also
gives individual model builders a more capable model merge.
New Shift Editor – the Shift Editor has been completely rewritten in .NET. You can more quickly
define your shifts and breaks in an easier to use interface.
New Array use – Arrays can now be used to initialize the same ProModel fields that Macros have
been able to. For example, you can initialize Location capacity or Resource units with an Array! The
key is to make sure the Array data is imported from an XLS file or a database.
Enhanced LOAD statement – the LOAD statement now has a PERM option that causes the load to act
like a JOIN. Basically, entities can be permanently loaded (joined) onto a base entity. This extends
joining capability but through the LOAD statement which already had great capability with the IFF
<condition> and IN <time> options.
New Status Light state – the Waiting state now shows as yellow for single capacity locations.
Previously it would show blue, the same as Empty/Idle.
More preemption, more often – more preemption checks have been implemented such that
preemption should occur more regularly. In particular, in situations where a preemptor is initially
denied in its attempt to preempt because the preemptee is in a non-preemptable state. Once the
preemptee gets into a preemptable state, it should now check for a preemptor and be preempted in
more situations than it had been.
Simulation engine optimization – the simulation engine has been optimized to run models faster.
Results will vary depending upon the model, however in one benchmark test the model increased in
speed by over 300%.
Mouse wheel and scrolling tables – the mouse wheel will now scroll your tables! Also, when grabbing
the scroll bar to quickly move to different records (i.e. rows), the table will be dynamically refreshed
showing exactly which record you are on (previously, the table would not be updated until you
released the scroll bar).
New Check for Updates – the automatic check for updates utility has been replaced with our latest
.NET version so it is compatible with Windows Vista.
Excel 2007 files (.XLSX) are now supported.
EMF graphics supported – Graphic files of type EMF (Enhanced Meta File) can be imported into
Background Graphics and the Graphic Editor.
When importing graphics into ProModel, an “All Image Files” filter was added so that all supported
graphic types (bmp, emf, gif, pcx, wmf) could be seen when choosing a file to import.
The graphic library buttons and graphics toolbar have been updated to the Windows XP/Vista look
and feel.
Toolbar icons have been added to the menus in Windows Vista for better visual association between
menu and toolbar items.
In the First Time dialog box in the Arrivals table, the arrival time text box and Edit Arrival Time button
have been swapped for ease of use and to reduce confusion.
The LAN installation has been updated to contain the latest HASP drivers and License Manager.
The DISPLAY statement in the Logic Builder now automatically adds quotation marks.
The last Entity selected in the Tools window is persisted before exiting the Processing or Arrivals
module. Now, when returning to one of these modules, the last Entity selected remains highlighted.
Fixes A created entity (from the CREATE statement) that obtains a resource in Move Logic through a GET
statement was incorrectly setting the state of a single capacity location to Idle if the state of the
location was Waiting at the time the created entity exited the location.
When opening 3DR, a database conversion error was thrown that said, “File Conversion Error in
‘Getting Entity Activity Data’ section of the file: <filename>.rdb. Please contact technical support for
assistance.” This only occurred in MedModel and was due to an error not being caught where an
entity, defined to have no stats collected, was renamed as another entity that was defined to collect
stats.
A compiler “Invalid or incomplete expression” error with context of “Resource Quantity: Line 0” was
thrown after manually changing the units of a resource and then clicking the Add resource button to
add a resource to the layout.
If a Setup downtime required the use of a resource and that resource was preempted away, the time
the location spent waiting for the resource to return was counted as Operation instead of Waiting.
The time an entity spends waiting for a Setup downtime to complete was not being reported as
%Waiting.
Implicitly split entities (using the Quantity field in the Routing dialog) with more than one routing
record in the routing block was causing the location’s blocked time to be reported incorrectly.
At a single capacity location, if multiple entities were unloaded or ungrouped (thus temporarily
allowing additional capacity at a single capacity location), the location’s state statistics were
incorrectly collected if the entities could be routed to more than one destination location.
State Values time series plot was not showing the correct state of a location if a resource was
preempted away from the location in order to be used during another resource’s downtime.
If a dynamic resource was being used by another resource during its downtime, the Trace would
incorrectly state that the resource being used “goes down at the current position” when it should say
that it “is already available at this location”.
Entity statistics were not always being collected as %Waiting when an entity was in a preempted
state.
The right-click menu would not appear in the Graphic Editor like it does when right-clicking on
graphics in the Background Graphics module.
The Build menu would become disabled after editing a model, saving the model with a different
name using Save As, simulating, and then re-opening the original model.
“Implicit Wait” and “Implicit Move For” warnings would appear and then WAIT and MOVE FOR
statements would automatically be added during compilation to logic that contained errors.
The RAND function was sometimes returning the upper limit value and never a zero which is contrary
to the documentation. For example, if RAND(10) was specified, a 10 would sometime be returned
which is not correct.
A resource moving to be used by another resource during its downtime, was having its move time
counted towards Travel to Park statistics rather than Travel to Use.
Imported background graphics disappear if the graphic is moved to the top left corner of the layout.
The simulation would terminate without warning or error if a USE statement was found after a MOVE
statement in Move Logic. An error message explaining that a “USE statement is not allowed after the
MOVE statement” now appears.
The Logic Builder was not allowing a paste of a “Move With OwnedResource()” statement without
first providing an index number specifying a resource.
The Arrays table Disable and Persist fields could not be toggled/set by using the space bar.
The conveyor Speed and Length fields were limited in the number of characters that could be
entered. They now can handle up to 512 characters.
When changing Views or zooming while in the Locations module, the locations would scale
appropriately in size but the background would not. Similar behavior occurred in other modules.
When right-clicking in a Logic Window, the Logic Builder would appear rather than a menu with Cut,
Copy, Paste, Select All, etc. choices.
When compiling logic, the Logic Window would scroll to the top line of the logic rather than remain at
the line of logic the cursor was at beforehand.
The Tank_UpdateStats subroutine was in some cases not collecting the state statistics correctly.
The Tank_DoOperation subroutine was ignoring any downtimes defined for the tank location.
The incorrect graphic name would appear in the mouse tooltip when hovering over the buttons of
graphic library icons.
A crash would occur when importing GIF files that were created in PowerPoint. Now an error
message is displayed explaining that GIF files with transparency are not currently supported.
Changing the entity graphic in Arrival Logic using the GRAPHIC statement had no effect during
simulation until the entity moved to the next location.
If multiple entities were attempting to preempt other entities (and switch them to their preemption
logic) at a multi-capacity location and the entities were in a non-preemptive state, only the first entity
would get switched to its preemption logic (once it got into a preemptive state). The other entities
would ignore their preemptive requests.
Entities were not shown animating on their routing path if a MOVE FOR statement was included in a
subroutine and that subroutine was called from Move Logic.
A crash would occur for a model with many variable counter graphics when attempting to pan the
layout during the model translation part of simulation.
A location’s state was not properly being counted as Waiting when an entity resumed processing
(after having been preempted) and was waiting to reclaim its resource (that was automatically freed
due to the preemption).
The LocState function was returning the location’s state as Empty/Idle when it was really Waiting.
The Quantity field in the Arrival Qty dialog (where Arrival Cycles can be specified) in the Arrivals table,
only allowed 17 characters to be entered.
An error “Internal Error: Cannot find an available location unit” occurred when an entity arrives at a
multi-unit location after having preempted an entity that attempted to resume processing after
having been preempted by previous entity.
An entity was incorrectly routing to one of its three possible route destinations when that route
became available. The entity should have remained and taken the route to the destination that it had
already preempted after the entity it preempted finished executing its preemption logic.
Having a GET or USE statement in preemption logic caused a crash.
When an entity in operation at a location was preempted by another entity, the time spent in
operation by the preempting entity was being logged as Empty/Idle instead of in Operation for a Time
Plot State Values chart.
A “None of the ROUTE statements were encountered in this execution pass” error occurred when an
entity attempted to move to its destination location after having been preempted and executed its
preemption logic.
A Location’s state for the Time Plot State Values chart was not being properly logged as Waiting.
Some entities were executing their post move logic before they had finished moving to the end of an
accumulating conveyor. This was more likely to occur if a previous entity had been blocked for a
short period of time at the end of the conveyor but long enough for the next entity to stop moving
and queue up behind it.
Some entities were loading onto the front of an accumulating conveyor before there was actual space
to do so. In some situations, the animation revealed this. There was an error in the internal
calculation versus graphical representation of the load zone space.
An “Animate3.cpp” error occurred after zooming or changing Views during a simulation run where
the model had many Variable counter graphics.
The application might have crashed during a simulation where a Crane was captured by an entity and
the Crane was already at the same location the entity was at.
On Windows Vista, ProModel shortcuts were not being installed correctly into the ProModel
Solutions\ProModel directory.
DTDELAY() function used in shift or break logic was incorrectly giving an 'improper usage' error.
Location Information for ALL locations was not showing location states as Down when Called
downtimes were initiated by the DOWN statement.
The application locked up when compiling logic in any Logic window where its text exceeded ~64 KB
in size.
The Edit menu was being enabled after simulating a model even though no tables were open.
Accessing the menu caused the application to abruptly close.
The incorrect array record was being updated when selecting the import or export file.
Executing a CREATE TAKE statement in Operation Logic followed by a MOVE WITH statement using
OWNEDRESOURCE() in Move Logic would cause a crash if the resource involved was a crane.
A shift file consisting of seven 24-hr shifts (with no breaks) was causing the application to either crash
or a resource assigned to the shift to take random downtimes.
The RESOURCEUNIT() function was not properly working for the first resource listed in the Resource
table.
If a downtime at a multi-capacity location preempted a processing entity, switching it to its
preemption logic, once the entity exited the location the downtime would not occur.
The application crashed in a special circumstance when a location downtime attempted to take a
location down. This only occurred after a first preemptive downtime completed but had been initially
delayed due to an entity, which had captured the location capacity, was traveling to the location.
Once the entity arrived, it was properly switched to its preemption logic and then exited the location
allowing the first downtime to occur. Once this downtime completed, the location would appear to
come back online. However, when the second downtime attempted to take the location down, the
application would crash.
The application crashed when an entity would exit a location it had incorrectly preempted and routed
to. Having two destinations to choose from, the entity should have waited and routed to the first
destination it had preempted and had switched the occupying entity to its preemption logic.
However, while it waited for the preempted entity to complete its preemption logic, the entity
incorrectly preempted an entity at the second destination location (no preemption logic) and
promptly routed to it.
In a special situation involving multi-unit locations and the LOAD statement, an entity ultimately
arrived at the correct location unit to be loaded but upon leaving the previous location would execute
the move logic pertaining to a different location unit.
% Setup statistics were being collected as %Operation statistics if a Setup downtime was preempted
by any Scheduled downtime (clock or shift). The %Setup that occurred before the preemption was
being included as %Operation.
When using a Macro to define the Empty or Full speed of a crane resource, the Hoist speed value was
ignored and the Bridge speed was used for the Hoist speed instead.
In a complex use of the USE statement where multiple resources were being requested, the incorrect
resources were being captured.
A translation error occurred when a macro was used in the Full and Empty Speed fields of a crane
resource.
In a special case where the same resource was preempted multiple times by different accumulating
requests, the resource was captured by an entity that required an additional resource but the entity
would incorrectly proceed to execute its logic without acquiring the other resource.
If a resource was transporting an entity to a location when a preemptive downtime for the resource
occurred, the resource would not be preempted and go down when it arrived at the destination
location but would have to wait until the entity freed the resource.
A compiler error now occurs if a time value is specified in a MOVE WITH <res> FOR <time> statement
and the resource being used is a dynamic resource. “FOR” only applies to static resources.
External files selected by double-clicking the filename in the Open File dialog, could inadvertently
save the file to the wrong External File record.
In a special situation involving a GET and a USE statement, a “Wait completion event not found” error
might have appeared.
The compiler now correctly gives an error if a System function is found on the left side of any Boolean
condition in a WAIT UNTIL statement (e.g. – “<system function> = 10” or “Var1 = 1 OR <system
function> = 10”). They are only allowed on the right side of a Boolean condition in a WAIT UNTIL
(e.g. – WAIT UNTIL var1 = <system function>).
Resource State statistics were not adding up to %100 because the time designated as % Blocked in
Travel was not properly being added to either %Travel to Use and/or %Travel to Park statistics.
An “Internal error” would occur when a resource downtime was terminated (preempted) by another
resource downtime while the original downtime was attempting to GET a resource.
A Parameter button was showing up for the MOVE statement when the Logic Builder was opened
from within Move Logic.
Waiting statistics in the Entity Activity and State tables contained negative values if entities in the
model were grouped (not renamed with AS option) and then later explicitly RENAMEd while still
grouped.
A “Stack overflow pushing integer” error would occur if a MOVE WITH OWNEDRESOURCE() statement
was executed without the entity actually owning any resources.
Includes 3DR version 2.0.11.93 containing the following fixes:
When modifying chart items to add or remove series in an existing chart, the titles in the chart were
being reset to their default formatting.
When changing the decimal precision, the chart title was being reset to its default formatting.
In Windows Vista, scroll bars in reports and charts were being clipped so that they were only partially
in view.
3DR would throw an error and not load the statistics RDB file if the path and filename were longer
than 126 characters.
The Variables table was not showing up in 3DR when simulating a model having Tanks and there were
no entity arrivals defined.
Changing the name or “alias” for a chart series in a saved View was not persisting after the View was
closed, reloaded and resaved.
The starting point for bucketing values in a Counts Time Plot chart was based on the first data point in
the series rather than zero (or the warmup end time).
The line width and style of a series in an existing chart, if changed, was being reset when adding or
removing series from the chart.
Saved views were not persisting when first created (i.e. the IVD file was not generated) in the case
where 3DR was left open and a simulation was started (which triggers 3DR to be automatically
closed).
The General table in the General Report was coming up blank if a saved view contained a Failed
Arrivals table but the simulation generated no failed arrivals.
Colors were incorrectly displayed in a State Values Time Plot chart containing series from multiple
scenarios if the chart was part of a saved view and the model was re-simulated with one of the
scenarios disabled.
Downtime statistics were not being displayed for static resources that were listed before any dynamic
resources in the Resource table in ProModel
7.0.12.243 (September 2007) The number of characters allowed in the array import database Connection String and the Data
Access Command fields was not properly set to 1024 and 4096, respectively.
The automatic updates utility was broken in the 7.0.11 update.
7.0.11.241 (May 2007) The application was terminating in a situation where a WAIT UNTIL statement was used in the Move
Logic of a Load or Join routing.
Array data was not importing when running a specific replication (using the “@” symbol) with the
Persist option set to “Keep”.
Statistics generated for Resource Groups were showing a value of “-1.#IND” when the resource group
is not used or there are no resources defined in the group.
In a specific case 3DR was not being properly shut down if open at the start of a simulation.
Physical memory usage in a specific instance was not being released between scenarios.
Stored procedures could not be used in the query string field for importing data into Arrays from a
database.
The application would terminate if an entity was ORDERed to a specific unit of a multi-unit location.
In some models, scrolling up or down in the location or resource tables could cause a crash.
Attempting to have an entity MOVE ON a crane type path network, as opposed to MOVE WITH a
resource assigned to a crane network, would terminate the application.
Simulating a model before any processing records are defined caused a crash.
Importing a graphic into Background Graphics and then moving that graphic over the top left-hand
corner of the Layout, would cause the graphic to seem to disappear.
When opening the Array Import File dialog, some UI elements exclusive to the Excel import option
would be inadvertently displayed along with the Database import UI elements.
Double-clicking the cell in the array table to open the Import Array dialog would cause any modified
data not to be saved after closing the dialog upon completion of editing.
Total Entry statistics for a tank location were not being calculated correctly when using the
Tank_TransferUpTo subroutine.
In a specific situation where a dynamic resource was preempted by a break downtime, the
application might crash.
For location and resource clock downtimes, if the frequency was ever evaluated as zero no additional
occurrences of that downtime would take place.
The limit on the number of input factors allowed in SimRunner has been increased from 60 to 500.
7.0.10.228 (December 2006) An entity request for multiple resources using a JOINTLY GET statement was not being fulfilled in a
situation where the resources were not initially available but later became available.
The application was ultimately terminating due to a situation where multiple resources had been
requested through a JOINTLY GET statement but not all resources were immediately available to
fulfill the request.
The application was terminating at the start of a simulation run (during translation) when the Text
field for a Macro was left blank.
The events list in the simulation engine was not properly clearing out after each replication which
resulted in unnecessary memory accumulation.
In the Portuguese version of ProModel:
The word “Desabilitar” was misspelled as “Disabilitar”
The “Custom Trace Options” window (accessed during simulation) did not have check boxes.
Includes 3DR version 2.0.6.85 containing the following fix:
In some cases the order of variables listed was different than the order listed in ProModel.
7.0.9.227 (September 2006) Ending the simulation while the Debug window was open caused the application to crash.
The string lengths for the Array Import DB Connection and Query string fields have been extended to
1024 and 4096, respectively.
Includes 3DR version 2.0.5.84 containing the following fixes:
Warmup time was not being properly displayed for a Time Plot State Values chart.
Time Plot State Values chart was showing a Location’s state as Empty/Idle instead of Waiting while in
a JOIN, LOAD, or MOVE WITH state.
Time Series statistics for Tank Locations were listed and displayed as Simple Values instead of
Timeweighted Values.
7.0.8.225 (August 2006) Added Entity conveyor width and length to the Entity graphics data table in the ProModelData COM
interface.
An array of type integer was not appropriately populated when using database connectivity.
Animation scripts were not generated properly which caused Resources to have incorrect graphics in
3D Animator during animation.
7.0.6.216 (June 2006) If the values entered for the First Time and Frequency of an arrival were greater than half the
maximum run length, the arrival would incorrectly occur at the beginning of the simulation.
When two logic windows (e.g. Operation and Move) were open and then one was closed, the toolbar
disappeared in the window that remained open.
If a model was simulated in which a resource had a zero entered for its DT Frequency, ProModel
would crash.
ProModel would not recognize an array import/export file path if the path contained an unmapped
drive.
Variable counter graphics would display more than 2 significant digits if the value to be displayed was
extremely small (e.g. 10-14).
Background graphics would inadvertently shift to the right when clicked on.
Version 6.x models containing entity spots that were placed to the extreme far right on the layout
would disappear when the model was loaded in 7.0.
When a model was loaded and run in ProModel using the ActiveX interface, and that model had a
runtime error, the "Do you want to collect statistics" message would incorrectly appear.
Entity movements (i.e. Move For, Move On, Move With) were not being correctly generated for a
3DA animation script, which resulted in no entity animation in 3DA.
The Xsub reference model was giving a run-time error.
ProModel was incorrectly calculating some statistics for resource groups.
ProModel would crash if an entity was ordered to a multi-unit location.
Attributes were generating an error when used in an expression array.
Includes 3DR version 2.0.4.83 containing the following fixes:
Time Series State Plot was showing the time a single-capacity location was in a Waiting state as
Empty/Idle instead.
The x-axis labels would disappear when zooming in on a Histogram chart.
The top left and top center charts in the Process Simulator default view would overlap.
If there are no Failed Arrivals in the model then the Failed Arrivals tab will not be displayed.
3DR was crashing when attempting to access Time Series data from a huge RDT file (e.g. 300+ Mb).
The upper and lower confidence intervals for the statistics displayed in the Process Simulator
scoreboard in 3DR were incorrectly being calculated for computers with regional settings set to
something other than US.
3DR would unexpectedly close if a General Report was created while any other chart was maximized
within 3DR.
7.0.5.207 (May 2006) Wait Until statement did not work properly in a particular instance unless Trace was running.
If a Free <resource> statement was used in that same resource’s clock downtime logic, it caused a
crash.
Variable counters during simulation had different background colors per digit.
Modifying path network mapping information caused the application to crash.
Graphics for Locations, Entities, and Resources were missing when opening a model.
Deleting a location unit and then deleting the parent location caused a crash.
A unidirectional path mapped to go in the opposite direction caused a crash.
Snap to grid in the Graphic Editor was not working.
Canceling out of exporting a graphic within Background Graphics caused a crash.
During a SimRunner optimization ProModel crashed during random experiment numbers.
A combination of a multi-unit resource, preemptive resource DT, and preemptive location DT caused
a crash.
An array mapped to a variable that had no statistical collection and no counter defined caused a “No
ROUTE statement encountered” error.
In the RDB object model, a column header in the Locations Costing table was not properly written out
to the RDB file.
Implemented an ObjectID() system function that returns a unique ID of an entity.
Added the entity ID within the Trace during simulation.
Includes 3DR version 2.0.2.79 containing the following fixes:
A manual change to the Y-axis value of a Time Weighted Time Series Plot was not persisting in a saved
view.
Values using a comma as decimal point when the computer regional settings are defined to handle a
comma were being saved with a decimal point.
Views saved in German regional settings did not open correctly in English regional settings.
Axis range values changed in Time-weighted Time Series Plots when the time unit was set to anything
other than hours were not persisting in a saved view.
An error occurred when using a comma as a decimal in the value specified for the bar width of a Time
Series Histogram.
Changes made to chart properties were not persisting when selecting or deselecting a series element
in the Display & Alias window.
7.0.4.201 (April 2006) There was a statistical issue when an entity that was created through the ROUTE statement was later
joined to a grouped entity.
When several entities that were created by a ROUTE statement were loaded onto another entity, the
UNLOAD statement did not properly unload.
Anyone with “Power User” rights to their computer was not being prompted when an update became
available.
The Portuguese version did not have the “Trace at Start” check box in the Simulation Options dialog.
Counters for Tanks were not showing their true fill level.
Table rows would not automatically move from the bottom of the table to the top when using the
Enter key to scroll down the table, which caused the highlighted row to go out of view.
Default animation speed was set to 100 instead of 55 when creating new models
Duplicate resource or location names in the shift assignments table were causing a crash at
simulation.
Graphics | Dimension dialog in the Graphic Editor did not work.
The Universal Update was installing a network version file that is not needed.
Includes 3DR version 2.0.1.77 containing the following fixes:
Changing the position of an object (variable, entity, etc.) in its corresponding table broke any saved
views containing that object.
3DR did not load properly if it was previously closed when minimized.
“Value History” text was appended to the name of a variable if the word “Contents” was at the end of
the variable name.
A tooltip displaying “Y axis” incorrectly appeared when the mouse hovered over the X axis in the Time
Series State Plot.
State Charts did not show all percentage values when displaying Point Labels.
Graphic color on the end of a bar in a State Chart was gray.
In some cases, the order of variables listed in the General Report was inconsistent with the order in
the model.
7.0.3.198 (March 2006) Fixed a problem with a multi-unit location where the error “Internal Error: Cannot find an available
location unit” would appear during simulation in a specific situation.
Fixed a crash that occurred when a USE statement would attempt to obtain more units of a resource
than that resource actually had.
Fixed a problem where the daylight savings feature would be used when Weekly Time was selected.
Fixed a problem where incorrect resource cost was calculated when the default time unit was set to
seconds, hours or days
Fixed a crash that occurred when a resource was called on break while moving and 'Skip Res DTs
when off-shift' was checked
Added a 'Trace at Start' checkbox to Simulation Options
7.0.0.194 (February 2006) Fixed the website link on the Shortcut Panel for MedModel and ServiceModel to point to
www.promodel.com
Added a Shift Editor button on the application toolbar next to the Shift Assignment button.
Fixed an issue where the toolbar show/hide checkmark in the View menu was not persisting.
Fixed a crash with the array import if no data was present in a cell of the spreadsheet.
7.0 Release (January 2006) – 7.0.0.191
Features User Pause by Calendar Date and Weekly Time
Enable/Disable Array records
Persist or clear Array data between replications
Time series data now collected for all replications
USB LAN hardware keys now available
Relative paths (instead of full paths) can be specified for all external files (graphic library, shifts, array
xls import, read, write, etc.)
Model package creation will retain the relative paths and folders of any external files and will create
those relative folders when the package is installed.
New HTML help system
Option to skip downtimes that occur during an off-shift period for a resource.
New software licensing wizard allowing automatic licensing using a serial number.
Expression and string array types (including import/export to Excel)
Comparison of strings in conditional logic.
Array import from a database using SQL connection string and query.
Arrays are no longer exported if the user chooses not to collect statistics at the end of a simulation.
Individual application settings for multiple user login to the same computer.
“End Simulation” option added to right-click menu during simulation.
XP themes are now supported.
The main application now has toolbars.
Logic windows have been redesigned with new toolbars and a status bar.
Tooltips showing graphic names in the Graphic Library.
PKG files can now be searched for and opened using the Open dialog.
Ctrl+H hotkey invokes the Search and Replace dialog.
ProModel will automatically check for available software updates when the application starts.
Time unit for simulation warm-up is now user-specified.
Fixes Fixed a View Text issue when the number of lines exceeded 32768.
Fixed a View Text crash when a line of macro logic is greater than 1024 characters.
Fixed some issues with closing 3DR when simulation begins.
Fixed an output problem with time series charts when clock precision is in days.
Fixed some internal memory access issues.
Fixed a GRAPHIC statement issue in move logic after a move to a conveyor.
WAIT and WAIT UNTIL statements were not being properly restricted from use in Initialization and
Termination logic.
Fixed problems with transparent counters not displaying correctly at runtime.
Optimization – changed compiler to only allocate memory for arrays during simulation translation,
not at edit time.
Fixed a View Text crash in the Processing records section.
Fixed some issues with Portuguese language version.
Fixed an issue where the transparent frame setting on variables was not persisting.
Fixed the duplication of resource records in a 3D Animator script file.
Fixed a problem with the overwrite option for animation file synchronization
Fixed a crash in Logic Builder when viewing external files.
Fixed an issue in the array dimensions field if it contained a space.
Fixed an error message that made reference to ProModel version 3.5
Fixed an issue with resource home, break, and off-shift node selection not persisting if node names
are arranged in a certain way in the path network table.
Fixed an issue with the Edit menu being enabled when you first load a model.
Fixed an issue with double-clicking a .MOD file for automatic launching of ProModel and loading of
the model if the model named contained a “-“ in it.
Fixed a crash when more then 20 dimensions are entered in the array edit table.
Fixed an issue where users with limited write access to their computers could not run ProModel.
Fixed a crash that occurred when clicking Cancel in the Debug window after selecting Global Change
and User Condition options.
Fixed an issue where costing statistics were not reset at the end of a warmup period.
Fixed an issue where extra time series statistics were being written out at the end of the simulation.
Fixed a problem where a text value was saved as a default for the Conveyor speed.
Fixed a crash when adding additional entity graphics out of sequence.
Fixed an issue with the COM interface where the Output Path contained in the Simulation Options
dialog was not being properly returned.
Fixed a problem where two View menus would appear in the application.
Fixed a crash when attempting to import a GIF file that was too large.
Fixed an issue with the Logic Builder where a Quantity button improperly appeared for a Tank
subroutine.
Fixed several issues in the Logic Builder where clicking back and forth between statement parameter
buttons would not properly reset the list of options.
Fixed a crash with the variable() function when it receives a value of 0 as a parameter.
Fixed a crash due to multiple resource downtimes with priorities in the 900 level.
Fixed a problem where a resource usage DT would cease to occur if the frequency of the DT ever
dropped lower than or equal to the duration.
Fixed an issue where macro names do not update in the conveyor speed and length fields when their
names are changed in macros table.
Fixed a problem where the TimesUsed() function doesn't compile correctly in DISPLAY statement.
Fixed a crash with a model due to an infeasible mapping constraint.
Fix an issue with daylight savings time adjustment not applying correctly to resources on shifts.
Fixed a problem with the MOVE WITH THEN FREE statement duplicating the cost of a resource.
Fixed a crash when the ENTRIES() function is used for a location whose statistics collection option is
set to None.
Fixed an issue where the cost of an entity incorrectly increases if a resource is preempted on its way
to that entity.
Fixed a crash when the ENTITY() function is used on a grouped entity that was previously routing
using a ROUTE statement.
Fixed a crash due to an arrival with the Occurrences evaluating to zero and the First Time set to
Weekly or Calendar date with either Repeat Weekly or Daily options checked.
Fixed a crash caused from a Preemption Process record not having any routing defined and the
application finding a non-preemption process record with routing.
Fixed an issue where the user-defined font did not apply to the Initialization and Termination logic
windows.
Fixed an issue with the margin in logic windows not always being consistent.
Fixed a problem where the tab key did not work in Initialization and Termination logic.
Fixed an issue where a location record would be added to the table when selecting the location table
window from the Window menu.
Fixed a crash due to a resource downtime requesting another resource not assigned to the same
path.
Fixed a crash if you try to run a simulation where an entity moves with a resource on a path network
that has only nodes and interfaces defined but path segments.
Fixed the Filtered Trace treeview icons to have a transparent background.
Fixed a statistics problem with a multi-unit location that joins an entity onto another.
Fixed a statistics problem where Average Time Waiting could show negative numbers for a conveyor
location that was preempted.
Fixed a problem where an incorrect compile error would appear if the user incorrectly used the
PROMPT statement.
Fixed issues when ProModel is displayed in a secondary monitor and messages from ProModel would
appear in the primary monitor.
Fixed a problem where ProModel uses 100% of the CPU when the simulation was paused.
Fixed a COM issue where a critical error with a model that would normally cause the simulation to
end, would be hidden and allow the simulation to continue.
Fixed a problem with the Graphic Editor where reopening it after it was viewed in a secondary
monitor would cause the application window to be really wide.
Fixed an issue where the application window would begin to flash if two blank routing records were
created.
Fixed the Output Path in Simulation Options to be automatically set to a valid path if the original path
it contained was not valid.
Fixed a memory overwrite that happens when running scenarios with macro names longer than 49
characters.
Fixed a memory overwrite issue in View Text
Optimization – changed some routines in the logic compiler that speeds up simulation.
Fixed an issue in the Logic Builder where a time option was incorrectly being added to the MOVE
statement.
Optimization – made some simulation speed improvements for some larger models.
Changed Array Import fields to accept 259 characters.
Fixed a crash due to location downtime requesting a resource and then that location being
preempted by an entity while the resource is traveling to the location.
6.2.1.130 (June 2005) o Fixed COM access to called downtime fields.
o Implemented ability to add and edit background text graphics via the COM interface.
6.2.1.127 (May 2005) Fixed an output problem with time series charts when clock precision is in days.
Implemented a LoadDefaults() COM function.
6.2.0.118 (February 2005) o Fixed INI file handling so that no default values are used until after string table has been set to proper
product.
6.2.0.117 (January 2005) Extended range of years to 2037 when running by calendar date
6.2.0.115 (November 2004) Fixed some crashes when the last resource in the table has zero units
Fix for bug #4148 - crash in arrays table.
Fix for bug #4079 – Array Import/Export table button crash
Fixed bug #6070 – crash when dragging a box around several objects on the layout.
Fix for bug #6030 – WAIT UNTIL on an array cell mapped to a variable may work differently when
trace is on or off.
6.2.0.96 (Maintenance Release, August 2004) o Generates script for 3D Animations – new checkbox has been added to the Simulation Options
window, allowing script generation to be turned on or off.
Common Random Numbers bug fix.
USB Keys! USB hardware keys are now available.
6.1.47 (Maintenance Release, January 2004) Locked graphics can no longer be moved with the arrow keys
Graphics text boxes no longer revert to Arial font for each new box
Problems resolved with array edit table fields
DOWN statement no longer allowed in the initialization logic
Output path can now exceed 128 characters
Fixed Log:SING error that was occurring when using certain statistical distributions, including
Uniform, Beta, Gamma, Pearson5, and Pearson6, evaluated to rare, non-allowed values.
Fixed Uniform distribution so that it will no longer return a value at the minimum or maximum of the
distribution range. For example, a U(.5,.5) will never return a 0 or a 1. Also added a limitation so that
the Uniform distribution cannot have a half range of 0. For example, U(1,0) is not allowed.
6.1.41 (Maintenance Release, September 2003) New daylight saving time option in Simulation Options allows the user to disable the daylight saving
time feature.
Changed Array Export so that it will not append an "R1" to the sheet name on the first replication.
The first replication will always export to the sheet name exactly as specified by the user. Any
additional replications will export with the specified sheet name with R2, R3, etc appended to the
name. If multiple scenarios are run, then the R1 will appear on the first replication.
Updated Output Viewer 3DR Help file to reflect changes to 3DR.
Fixed defect with the Graphic Editor so it no longer crashes if pathname is more than 80 characters.
Limit is now 256 characters.
Fixed defect with the Shift Editor where shifts with names exceeding 80 characters can now be saved.
Fixed defect with resource downtime & preemption.
Fixed defect with plotting time-weighted variables in 3DR.
Fixed defect with saving views in 3DR.
Fixed defects with the Array Import/Export fields.
This update also includes Hotfix 6.0.30 updates, which included the following changes and fixes:
Added Menu options to launch the License Manager and Check for Updates.
Updated ActiveX documentation, available in ActiveX.pdf file.
Fixed bug in model packages, where model packages that were created in 6.0.20 Professional
versions, which contained external files, were unable to run a simulation in Run-Time Silver versions
of the software.
Fixed bug in Model Package Association, where the default path for installing the model package was
shown as an incomplete path.
Fixed bug in Output Viewer 3DR, where Scenario Labels displayed incorrectly.
Fixed bug, where ProModel PI could not detect a stand-alone hardware key after installing ProModel
6.0.20.
6.0 Features (Released April 2003)
New & Modified Features • Custom Trace – allows users to see the trace only for particular locations or entities.
• Views Panel – a “Stay on top” view selector for easier selection of views during animation
• Common Random Numbers – when enabled, it ensures that the sequence of starting seed values for
each stream in a set of replications is identical to the starting seed values for corresponding
replications in every other scenario.
• Location Time Series Statistics – you can now plot location state information over time.
• Location Downtimes – Implemented a Location DOWN() statement to locations onto downtime based
from elsewhere n your model.
New & Modified Statements and Functions • GetReplicationNum() – Returns the replication number
• LocState() – tells you what the state of a given location is (Busy, Waiting, etc.)
• PercentOp() – tells you the current Operation % for a location
• PercentUtil() – tells you the current Utilization % for a resource
• ResourceUnit() – tells you what unit number of a resource is being utilized.
2002 (5.0) Features (released April 2002) Software Keys - Customers will now use software keys instead of hardware keys. SW Key activation
will be handled by our Tech Support Department, via email or by phone.
License Manager - Customers will be able to move their license to other computers, or "check-out"
their license to another machine for a defined period of time.
Output Viewer 3DR - We will keep the current output viewer, but allow our new and improved
Output Viewer 3DR to be set as the default stats output program. This 3DR program will
automatically convert our rdb (output file) into an idb format that is then read into the 3DR program.
This feature provides excellent new charting and plotting capabilities. Customization of default charts
and reports, etc.
Variable display settings retain formatting - Change the formatting (Variable display size) for one
variable and all successively created Variable selected for display will inherit the new display
appearance.
Change the default .glb for new models - In the past, the default graphic library (when creating a new
model) has been promod4.glb. When creating a new model, the user will have to specify their own
glb each time, or customize the provided promod4.glb with their own icons. Now the user can change
the default glb to whatever glb file they would like, and set it as the default (saved in their promod.ini
settings).
Array exports for replications - When exporting arrays to Excel spreadsheets, the user can now export
the arrays for each replication and scenario--each replication and scenario is saved to a separate
worksheet in the Excel file.
Anchored background graphics - Any background graphic can be "locked" into place so that it cannot
be accidentally moved.
Alignment function for layout graphics - Select your background graphics and align them (left, right,
centered, top, bottom, or middle) or distribute them evenly.
Zoom in a box - During simulation run, drag box around the desired zoom area and quickly zoom in to
the desired area.
Yes to All when creating model package
Graphics coordinates (x,y) - allows layout coordinates to appear in top left corner of layout screen
(can be toggled on and off). Tells the model builder the x and y coordinates of the curser location.
XLS format in addition to WK1 format - allows the direct reading of xls files for Arrival Files and Entity-
Location files. This is in addition to the archaic wk1 format that has been our standard.
Pre-translation check for path networks - At simulation run time, when the model code is compiling, a
check is done to see if the path networks have changed since the last compile. If they have not
changed, then ProModel will not recompile the path network mapping logic--this will save many
model builders a ton of time!
2001 (4.5) Features (released April 2001) Improved capability of Dynamic Plots
Simple, transferable User Interfaces
Customizable Tools Menu (add custom links to custom apps)
CalMonth() and CalYear(), CalDOM() functions
SimRunner 3.0
Power Tools
4.21 and 4.22 Features (released second half of 1999) Array Import and Export directly from Excel spreadsheets
Local Find and Replace
Undo Button (within each operation logic window)
Tank subroutines use default time units for flow rate.
Save Chart Views in the Output Viewer
4.2 Features (released first half of 1999) Dynamic Plots
Save As Excel – saves output file as an Excel spreadsheet.
Tank Logic Builder – easier to create tank logic
Model Protection
4.1 Features (released October 1998) Appointment module
Independently scheduled arrivals
24 hour on-screen clock
Resource grouping
Additional OLE capability