ficha vlb212

8/9/2019 Ficha Vlb212

1/10

www.valbony.com [email protected] 52 (33) 3637 8976

L I V E S T A G EO N

V L B

2 1 2

SISTEMA LINEAL UNISSON VLB212

El VLB-212 es un sistema lineal compacto pero poderoso, para los amantes del sistema pasivo, diseado para

aquellos que gustan de una excelente presin sonora y un control total.

Optimo en todas sus partes, equilibrado y verstil en su uso. Al fabricarlo pensamos primero en calidad que eneconoma, pero logramos ambas.

8/9/2019 Ficha Vlb212

2/10

www.valbony.com [email protected] 52- (33) 3637 8976Belisario Dominguez 3993-1 Huentitn el alto Guadalajara, Jalisc,o Mxico CP:44390


UNI SONS

CARACTERSTICAS La caja acstica del VLB212 est fabricada con un exclusivo sistema de ensambleencajonado cortado con precisin en ROUTER CNC las cuales pasan al rea de armado, pegado, engrapado,clavado y atornillado a mano bajo rigurosos lineamientos de calidad, formando una pieza slida y fuerte.

DIFUSOR : Difusor de 6" instalado de aluminio de guas-hondas para driver salida de 1 1/4""

TERMINADO: color negro a 3 capas. Este material es el numero 1 en terminados de alta calidad,mejorando la gran acstica de nuestros bafles y dandole una extraordinaria durabilidad y resistencia al uso eintemperie. Un terminado de clase mundial. Es el material ms resistente conocido en el mercadoLos frentes estn protegidos con lmina de metal perforado y pintura electrosttica, recubiertos de porofleximpermeable.

RIGGING : Los herrajes estn diseados para dar al sistema lineal todas las posibilidades de coberturasolicitadas para cada necesidad. Barrenos calculados y exactos para un montaje fcil y seguro, CON 0, 1.5 , 3,4.5, 6 7.5. Pernos activos con sistema de seguridad fabricados por nosotros. Los herrajes estn recubiertos depintura electrosttica del mismo color de la caja acstica. Los proyectos pueden surgir desde 4 cajas acsticashasta 16 por lado. (Ver ficha tcnica del boomper VLB212)

COMPONENTES: 2 bocinas 12" y un driver 3" (no incluidos) con conectores NL4 perfectamente utilizable enmontajes de mediana necesidad a grandes eventos

DIMENSIONES: 87cm de ancho. 32cm de alto 45cm de fondo.

PESO: 22.2kg (sin componentes)

:

POLIUREA

Cobertura horizontal: 120. Cobertura vertical: depende del ngulo elegido

SISTEMA LINEAL VLB212

8/9/2019 Ficha Vlb212

3/10



SISTEMA LINEAL VLB212

VISTA LATERALVISTA FRONTAL

ISOMETRICO

VISTA SUPERIOR

UNI SONS

NOTA: Algunos elementos han sido omitidos a propsito para proteger propiedad intelectual.

24.5cm 32cm

45cm

87cm

8/9/2019 Ficha Vlb212

4/10


UNI SONS

GRADOS DE POSICIONAMIENTO EN LINEARRAY

DIAGRAMA DE CONEXIN

B O C I N A

I Z Q U I E R D A ( + )

B O C I N A

I Z Q U I E R D A ( + )

B O C I N A

D E R E C H A ( + )

B O C I N A

D E R E C H A ( + )

1+

1-2-

2+

1+

1-2-

2+

VLB- 212

CABLE ROJO ( + )CABLE NEGRO ( - )

8 OHMS A G U D O ( - )

A G U D O ( + )

8/9/2019 Ficha Vlb212

5/10

Ultra light loudspeaker (3.83 kg. 8.43 lb.) 3 (77 mm.) voice coil High sensitivity: 96 dB High performance neodymium magnet system Half the weight than a conventional ferrite model Large Xmax: 5 mm. Extra vented magnetic structure Designed for extremely compact woofer applications

12LW30/N

GENERAL DESCRIPTION

KEY FEATURES

This 12 bass loudspeaker has been designed to achieve a very light loudspeaker with superior technical specifications. Thus,the magnetic system incorporates a high energy neodymium magnet, reducing the total mass of the unit to less than 50% of aconventional ferrite model. Moreover, the heat dissipation has been improved with the use of extra-cooling. The 12LW30/Nincorporates a 3 voice coil made with high quality materials: round copper wire with high temperature bonding strength andpolyimide former. The 12LW30/N is highly recommended for those woofer applications that require a light and small loudspeakerwith excellent technical specifications.

FREQUENCY RESPONSE AND DISTORTION CURVES

PREDICTED LOW FREQUENCY RESPONSE

Note: on axis frequency response measured with loudspeaker standingon infinite baffle in anechoic chamber, 1w @ 1m.

Note: Bass-reflex cabinet, Vb=50 l, fb=40 Hz

FREE AIR IMPEDANCE CURVE

12LW30/N Nd LW30 S e r i e s

POWER COMPRESSION LOSSES

Note: These losses are calculated from a five minutes AES power testapplying band limited pink noise (25-1200 Hz). The loudspeaker is free-airstanding.

0

1

2

3

4

5

6

50 150 250 350 450

Power (W)

d B

8/9/2019 Ficha Vlb212

6/10

12LW30/N

MOUNTING INFORMATION

TECHNICAL SPECIFICATIONS DIMENSION DRAWINGS

MATERIALS

Nominal diameterRated impedanceMinimum impedancePower capacity *Program powerSensitivityFrequency rangeRecom. enclosure vol.Voice coil diameterMagnetic assembly weightBL factor

Moving massVoice coil lengthAir gap heightX damage (peak to peak)

300 mm. 12 in.8 ohms.

7.1 ohms.450 w AES

900 w96 dB 2.83v @ 1m @ 2

35 - 5000 Hz20 / 70 l 0.7 / 2.5 ft. 3

77 mm. 3 in.3.13 kg. 6.88 lb.

17.9 N / A

0.066 kg.17 mm.8 mm.

30 mm.

Overall diameterBolt circle diameterBaffle cutout diameter:- Front mount- Rear mount

DepthVolume displaced by driverNet weightShipping weight

312 mm. 12.28 in.294.5 mm. 11.59 in.

277.5 mm. 10.93 in.280 mm. 11.02 in.

147 mm. 5.79 in.4 l 0.11 ft. 3

3.83 kg. 8.43 lb.4.53 kg. 9.97 lb.

Resonant frequency, fsD.C. Voice coil resistance, ReMechanical Quality Factor, QmsElectrical Quality Factor, QesTotal Quality Factor, Qts

Equivalent Air Volume to Cms, VasMechanical Compliance, CmsMechanical Resistance, RmsEfficiency, o (%)Effective Surface Area, Sd (m 2)Maximum Displacement, XmaxDisplacement Volume, VdVoice Coil Inductance, Le @ 1 kHz

38 Hz6.1 ohms.

6.60.3

0.29

109 l267 m / N2.4 kg / s

20.0540 m 2

5 mm.268 cm 3

1.4 mH

Voice coil: round copper wire with high temperaturebonding strength. Polyimide former able to withstandhigh temperatures.

Cone: high stiffness paper cone. Surround: treated cloth to assure good retaining of

elasticity in despite of continuing use.

Spider: cotton spider. Metal parts: anti-corrosion coated to resist

aggressive environmental conditions. Basket: specially designed die cast aluminium bas-

ket to avoid disturbing resonances. Magnet: high energy neodymium magnet.

12LW30/N

a c s t i c a b e y m a , s . a .

Polgono Industrial Moncada II C/. Pont Sec, 1c 46113 MONCADA - Valencia (Spain) Tel. ( 34 ) 96 130 13 75 Fax ( 34 ) 96 130 15 07 http://www.beyma.com E-mail: [email protected]

Nd LW30 S e r i e s

Notes:

*The power capacity is determined according to AES2-1984 (r2003) standard.Program power is defined as the transducers ability to handle normal music program material.

**T-S parameters are measured after an exercise period using a preconditioning power test.The measurements are carried out with a velocity-current laser transducer and will refle ct the long

term parameters (once the loudspeaker has been working for a short period of time).

THIELE-SMALL PARAMETERS **

8/9/2019 Ficha Vlb212

7/10

CP-755Nd/Al HIGH FREQUENCY COMPRESSION DRIVER


TECHNICAL SPECIFICATIONS

MATERIALS

GENERAL DESCRIPTION

Throat diameterRated impedanceMinimum impedanceD.C. ResistancePower capacity *

Program power

Sensitivity **

Frequency rangeRecommended crossoverVoice coil diameterMagnetic assembly weightFlux densityBL factor

36 mm. 1.4 in.8 ohms

7.3 ohms @ 3.5 kHz5.5 ohms

60 w AES above 0.8 kHz80 w AES above 1.5 kHz

120 w above 0.8 kHz160 w above 1.5 kHz

112 dB 1 w @ 1mcoupled to TD-565 horn

0.6 - 20 kHz800 Hz or higher (12 dB/oct. min.)

72.2 mm. 2.87 in.2.7 kg. 5.94 lb.

2.2 T11.5 N/A

Overall diameterDepthMounting

Net weightShipping weight

145 mm. 5.70 in.65 mm. 2.56 in.

Four M6 threaded holes, 90 apart on101.6 mm (4 in.) diameter circle.Mounting hardware is supplied.

2.96 kg. 6.51 lb.3.21 kg. 7.06 lb.

Diaphragm: aluminium. Voice coil: edgewound aluminium ribbon wire. Voice coil former: kapton. Magnet: neodymium.

This high frequency compression driver features a composite structure diaphragm. It has a Mylar surround to provide damping andavoid resonant peaks typical of metal surrounds. The dome is made of pure aluminium, with its unique mechanical properties.This diaphragm combined with a new optimized phasing-plug and a copper ring, results in an extremely smoothed and extended highfrequency response.

CP-755Nd/Al

DIMENSION DRAWINGS



Note: on axis frequency response measured coupled to TD-565horn in anechoic chamber, 1w @ 1m.



Notes:

*The power capacity is determined according to AES2-1984 (r2003) standard.Program power is defined as the transducers ability to handle normal music program material.**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.

0 4 9

8/9/2019 Ficha Vlb212

8/10

CP-755Ti HIGH FREQUENCY COMPRESSION DRIVER


TECHNICAL SPECIFICATIONS

MATERIALS

GENERAL DESCRIPTION

Throat diameterRated impedanceMinimum impedanceD.C. ResistancePower capacity

Program power

Sensitivity

Frequency rangeRecommended crossoverVoice coil diameterMagnetic assembly weightFlux densityBL factor

36 mm. 1.4 in.8 ohms

7.3 ohms @ 3.5 kHz5.5 ohms

70 w AES above 0.8 kHz90 w AES above 1.5 kHz

140 w above 0.8 kHz180 w above 1.5 kHz

110 dB 1 w @ 1mcoupled to TD-565 horn

0.6 - 20 kHz800 Hz or higher (12 dB/oct. min.)

72.2 mm. 2.87 in.6.5 kg. 14.33 lb.

1.875 T10 N/A

Overall diameterDepthMounting

Net weightShipping weight

192 mm. 7.56 in.78 mm. 3.07 in.

Four M6 threaded holes, 90 apart on101.6 mm (4 in.) diameter circle.Mounting hardware is supplied.

6.75 kg. 14.85 lb.7 kg. 15.4 lb.

Diaphragm: titanium. Voice coil: edgewound aluminium ribbon wire. Voice coil former: kapton. Magnet: ferrite.

This high frequency compression driver features a composite structure diaphragm. It has a Mylar surround to provide damping andavoid resonant peaks typical of metal surrounds. The dome is made of pure titanium, with its unique mechanical properties.This diaphragm combined with a new optimized phasing-plug and a copper ring, results in an extremely smoothed and extended highfrequency response.

CP-755Ti

DIMENSION DRAWINGS






Notes:

*The power capacity is determined according to AES2-1984 (r2003) standard.Program power is defined as the transducers ability to handle normal music program material.**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.

0 4 9

8/9/2019 Ficha Vlb212

9/10

High power handling (400 w AES) 3 (77 mm) copper voice coil with apical former Optimum winding length for increased linear

excursion Extended response in the medium frequency range Designed for high power woofer applications

SM112/N

GENERAL DESCRIPTION

KEY FEATURES

The design concept of this low frequency transducer arises from the need of achieve a more resistant loudspeaker that matchesthe more and more power given by ultimate amplification systems. In order to accomplish that, almost every component of thespeaker has been reconsidered. The SM-112/N incorporates a 3 voice coil made with high quality materials: copper round wirewith high temperature bonding strength and apical former. Moreover, it features a powerful magnet system with rear airventilation. All these facts result in a 12 driver with extended and smooth low-mid frequency response, reduced harmonicdistortion, good efficiency and excellent power handling (400 w AES). The SM-112/N is specially recommended for wooferapplications.


PREDICTED LOW FREQUENCY RESPONSE

Note: on axis frequency response measured with loudspeaker standingon infinite baffle in anechoic chamber, 1w @ 1m.

Note: Bass-reflex cabinet, Vb=70 l, fb=40 Hz

FREE AIR IMPEDANCE CURVE

SM112/N S M S e r i e s

POWER COMPRESSION LOSSES

Note: These losses are calculated from a five minutes AES power testapplying band limited pink noise (25-1200 Hz). The loudspeaker is free-airstanding.

1,0

2,0

3,0

4,0

5,0

50 120 190 260 330 400

Power (W)

d B

8/9/2019 Ficha Vlb212

10/10

SM112/N S M S e r i e s


TECHNICAL SPECIFICATIONS DIMENSION DRAWINGS

MATERIALS

Nominal diameterRated impedanceMinimum impedancePower capacity *Program powerSensitivityFrequency rangeRecom. enclosure vol.Voice coil diameterMagnetic assembly weightBL factor

Moving massVoice coil lengthAir gap heightX damage (peak to peak)

300 mm. 12 in.8 ohms.

7.4 ohms.400 w AES

800 w97 dB 2.83v @ 1m @ 2

35 - 4000 Hz30 / 100 l 1.06 / 3.53 ft. 3

77 mm. 3 in.4.9 kg. 10.8 lb.

17.2 N / A

0.052 kg.18 mm.7 mm.

30 mm.

Overall diameterBolt circle diameterBaffle cutout diameter:- Front mount- Rear mount

DepthVolume displaced by driverNet weightShipping weight

312 mm. 12.3 in.294.5 mm. 11.6 in.

277.5 mm. 10.9 in.280 mm. 11 in.

138 mm. 5.43 in.4.5 l 0.16 ft. 35.65 kg. 12.45 lb.

6 kg. 13.23 lb.

Resonant frequency, fsD.C. Voice coil resistance, ReMechanical Quality Factor, QmsElectrical Quality Factor, QesTotal Quality Factor, Qts

Equivalent Air Volume to Cms, VasMechanical Compliance, CmsMechanical Resistance, RmsEfficiency, o (%)Effective Surface Area, Sd (m 2)Maximum Displacement, XmaxDisplacement Volume, VdVoice Coil Inductance, Le @ 1 kHz

38 Hz6.5 ohms.

7.20.280.27

138 l327 m / N1.8 kg / s

2.60.0550 m 2

5.5 mm.300 cm 3

1.1 mH

Voice coil: copper round wire with high temperaturebonding strength. Apical former able to withstandhigh temperatures.

Cone: high stiffness paper cone. Surround: specially treated cloth surround. Spider: cotton spider. Metal parts: effective protection against corrosion. Basket: specially designed die cast aluminium bas-

ket to avoid disturbing resonances. Magnet: high Curie temperature ferrite.

SM112/N

a c s t i c a b e y m a , s . a .


Notes:

*The power capacity is determined according to AES2-1984 (r2003) standard.Program power is defined as the transducers ability to handle normal music program material.

**T-S parameters are measured after an exercise period using a preconditioning power test.The measurements are carried out with a velocity-current laser transducer and will refle ct the longterm parameters (once the loudspeaker has been working for a short period of time).

THIELE-SMALL PARAMETERS **

ficha vlb212

Documents