integrando iec 61850 dentro de aplicaciones para … · integrando iec 61850 dentro de aplicaciones...
Post on 29-Jul-2018
237 Views
Preview:
TRANSCRIPT
Integrando IEC 61850 dentro de aplicaciones para Rockwell Automation
Antonio T RamírezRegional Sales Manager – Andean & Caribbean
Solución IEC-61850, Qué es?SEL hardware/software
Relé de Protección 751AArquitectura SELRápida Configuración SEL
ProSoft hardware/softwareProSoft PLX8x-EIP-61850ProSoft “Configuration Manager”
PlantPAx hardware/softwareControlLogixFactoryTalk ViewFactoryTalk Historian
Nuestra Solución a 61850
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Por qué usar IEC 61850?
Registros Modbus Objectos & variables DNP3
Register Address Description
40421 Phase B Current Angle
40422 Phase C Current Angle
40423 Phase A Neutral-Side Angle
40424 Phase B Neutral-Side Angle
40425 Phase C Neutral-Side Angle
40426 Phase A Differential Angle
40427 Phase B Differential Angle
Object 30, Var 2, Index:
Description
1 Phase B Current Angle
2 Phase C Current Angle
3 Phase A Neutral-Side Angle
4 Phase B Neutral-Side Angle
5 Phase C Neutral-Side Angle
6 Phase A Differential Angle
7 Phase B Differential Angle
Dirección de los datos/índices no es
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Modelo de Datos IEC 61850IEC 61850 usa Etiquetas Auto-Descriptivas:
Relay1/XCBR1$Health$stVal
DNP3: “Obj 30 Var 1 Index 3”Modbus: “Register 41003”
“status value”
“Health”
“Circuit Breaker 1”
DispositivoLogico
Health of Circuit
Breaker 1
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Configuración Intuitiva
Visualiza la red IEC 61850 gráficamente
Los objetos en la data son asignados automáticamente, o “drag-and-drop…”
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Configuración Intuitiva
…y automáticamente importada al RXLogix 5000
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Definiciones de reporte vía arquitectura SEL
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Modelo de datos IEC 61850…y el nombramiento se mantiene en el PLC.
No más objetos cifrados, números e índices!
RelayName/XCBR$Health$stVal
RelayName_Health_stVal
EtherNet/IP IEC 61850
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Modelo de datos IEC 61850El nombramiento en los puntos de datos es similar a la mayoría de los fabricantes en el mercado…
RelayName/XCBR$Health$stVal
Brand A Brand B Brand C Brand D
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Rockwell PAC a IEC 61850 IEDsGateway
Trabajan con EtherNet/IP basado en losPLCs / PACs de Rockwell AutomationTrabajan con todos los IEC61850 IEDs
IEC61850
Ethe
rNet
/IP
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
AOI Customizados dentro de Studio 5000
Importa los AOI dentro del Studio 5000Selecciona losAOI y configuralas etiquetasDefine el móduloPLX8x en el I/O árbol de configuración
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Plantillas PlantPAx
Existen plantillas PlantPAxdisponibles para halar todoslos datos del cliente en un archivo .cid para los equiposSELLas plantillas iguales se direccionan a los valores de la etiqueta definidas enProSoft y estas generan un “Add-On Instruction” y un tipo de datos “User-Defined”
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
Preguntas?
Si tienes dudas o te gustaría conversarde alguna aplicación específica, por favor sígueme a nuestro demo y estarédispuesto a contestar tus preguntas.
Copyright ©2015 ProSoft Technology, Inc. All rights Reserved.
top related