use and maintenance manual - mv agusta club schweiz · 3.1 location of controls and instruments 38...

Use and maintenance manual

- 2 -

Il presente Manuale di uso e manutenzione è disponibile nelle edizioni in lingua sotto specificate:This Manual is available in the languages listed below:Le présent livret d’utilisation et d’entretien est disponible dans les éditions rédigées dans les languesspécifiées ci-dessous:Die vorliegende Bedienungs- und Wartungsanleitung ist in folgenden Sprachen erhältlich:Las ediciones del presente manual de uso y mantenimiento están disponibles en los siguientes idiomas:

Edition Italienne

Edition Anglaise

Edition Française

Edition Allemande

Edition Espagnole

Edition USA

8000A0960

8A00A0960

8B00A0960

8C00A0960

8D00A0960

8000A0961

Edición en Italiano

Edición en Inglés

Edición en Francés

Edición en Alemán

Edición en Español

Edición USA

Italienische Ausgabe

Englische Ausgabe

Französische Ausgabe

Deutsche Ausgabe

Spanische Ausgabe

USA Ausgabe

Codice/Code/CodeBestell-Nr./Código

Edizione Italiana

Edizione Inglese

Edizione Francese

Edizione Tedesca

Edizione Spagnola

Edizione USA

Italian Edition

English Edition

French Edition

German Edition

Spanish Edition

USA Edition

- 3 -

Dear Customer,

We wish to thank you for your preference and congratulate you on purchasing your new F4 SPR.Your choice is a reward for the passionate effort our technicians have put into giving the F4 SPR func-tional and aesthetic characteristics that place it above the finest motorcycles currently available on themarket, making it an exclusive and sought-after item.If, from a purely technical standpoint, the F4 SPR represents an internationally recognized point of ref-erence on account of the innumerable innovations it introduces, its sleek, timeless design wonderfullycombines a glorious past with the new millennium.The combination of these elements, which was made possible by love of detail, passion, and the desireto realize a technically and aesthetically superior motorcycle, allows the F4 SPR to soar above passingfashions, giving it the privilege of being considered a unique item.This booklet contains useful information on the periodic maintenance operations that are needed to keepthe vehicle in full working order and maintain the warranty coverage.

For further information, please feel free to contact our Customer Care Service.

Have a good time!MV AgustaClaudio Castiglioni Chairman

- 4 -

chap. Subjects covered page

1 GENERAL INFORMATION 101.1 Purpose of the manual 101.2 Symbols 111.3 Warranty Booklet and Service Coupons 121.4 Identification data 132 SAFETY INFORMATION 202.1 Safety 202.1.1 Note on tampering 202.1.2 Safety rules 212.1.3 Installing accessories 232.1.4 Vehicle load 252.1.5 Modifications 262.1.6 Competitions 262.1.7 Recommendations for safe riding 272.1.8 Protective clothing 302.1.9 Suggestions against theft 312.2 Safety labels - Location 322.3 Safety - Visual and acoustic signals 373 CONTROLS AND INSTRUMENTS 383.1 Location of controls and instruments 383.2 Sidestand 393.3 Handlebar controls, left side 40


3.4 Handlebar controls, right side 423.5 Ignition switch and steering lock 453.6 Gear lever 473.7 Instruments and warning lights 483.7.1 Warning lights 493.7.2 Multifunction display 50

4 OPERATION 514.1 Using the motorcycle 514.2 Running-in 524.3 Starting the engine 544.4 Selecting and setting the display functions 564.4.1 Selecting the display functions 574.4.2 Setting the measurement units 594.4.3 Resetting the trip mileage counters 624.4.4 Setting the clock 654.4.5 Chronometer 67

4.5 Refuelling 76

4.6 Glove compartment 77

4.7 Parking the motorcycle 784.8 Preriding checks 80

4.9 Riding 82

CONTENTS

- 5 -

CONTENTS


5 ADJUSTMENTS 83

5.1 List of adjustments 835.2 Table of adjustments 855.3 Adjusting the front brake lever 865.4 Adjusting the clutch lever 865.5 Adjusting the rearview mirrors 875.6 Adjusting the steering damper 875.7 Adjusting the front suspension 885.7.1 Spring preload 895.7.2 Rebound damper (front suspension) 895.7.3 Compression damper (front suspension) 905.8 Adjusting the rear suspension 905.8.1 Rebound damper (rear suspension) 925.8.2 High speed compression damper

(rear suspension) 92

5.8.3 Low speed compression damper(rear suspension) 92

5.9. Headlight adjustment 93

6 MAINTENANCE 946.1 Tables of scheduled maintenance and

checks 94


6.2 Tools and accessories supplied 104

6.3 Table of lubricants and fluids 105

6.4 Removing/fitting the right-hand side

fairing 106

6.5 Checking the engine oil level 108

6.5.1 Topping up the engine oil level 109

6.6 Checking the coolant level 111

6.6.1 Topping up the coolant level 112

6.7 Checking the wear of the brake pads 114

6.8 Checking the brake fluid level 115

6.9 Checking the clutch fluid level 117

6.10 Checking and replacing the tyres 118

6.11 Checking and lubricating the drive chain 123

6.12 Checking the idle speed 127

6.13 Replacing parts - General information 128

6.13.1 Replacing the fuses 128

6.13.2 Replacing the low beam bulb 131

6.13.3 Replacing the high beam bulb 132

6.13.4 Replacing the front turn indicator bulbs 133

6.13.5 Replacing the rear turn indicator bulbs 134

- 6 -


6.13.6 Replacing the rear light and brake lightbulb 135

6.13.7 Replacing the license plate light bulb 1366.14 Battery 1376.15 Cleaning the motorcycle 139

6.16 Prolonged inactivity 141

7 TROUBLESHOOTING FLOW CHART 1427.1 Engine problems 1427.2 Electrical equipment problems 147

8 TECHNICAL INFORMATION 1508.1 Motorcycle overview 1508.1.1 Front brake circuit 1528.1.2 Rear brake circuit 1538.1.3 Clutch circuit 1548.1.4 Engine lubrication 1558.1.5 Coolant circuit 1568.1.6 Fuel system 1578.2 Specifications 1588.3 Carbon components 1658.4 Accessories 1668.5 Clothing 167

CONTENTS

- 7 -

INDEX

Accessories 166– installation 23Adjustments– clutch lever 86– front brake lever 86– front suspension 88– headlight 93– rear suspension 90– rearview mirrors 87– steering damper 87– table 85

A

Battery 137Brakes– fluid level, check 115– front brake circuit 152– front brake lever, adjustment 86– pads, wear check 114– rear brake circuit 153Bulbs, replacement of– front turn indicators 133– high beam 132– license plate light 136– low beam 131– rear light and brake light 135– rear turn indicators 134

B

Damper– compression (front suspension) 90– compression (rear suspension) 92– rebound (front suspension) 89– rebound (rear suspension) 92Display, multifunction 50– selecting functions 57– setting measurement units 59

D

Carbon components 165Chain– check 123– lubrication 125Cleaning the motorcycle 139Clutch– circuit 154– fluid level, check 117– lever, adjustment 86Competitions 26Controls and instruments, location 38Coolant– level, check 111– circuit 156– topping up 112

C

- 8 -

INDEX

Electrical equipment, troubleshooting 147Engine– lubrication 155– oil level, check 108– oil level, topping up 109– serial number 13– starting 54– troubleshooting 142

Handlebar controls– left side 40– right side 42Headlight, adjustment 93– high beam, bulb replacement 132– low beam, bulb replacement 131

H

E

Fuel system 157Fuses, replacement 128

F

GGear lever 47Glove compartment 77

Identification data 13Idle speed, check 127Ignition switch and steering lock 45Instruments and warning lights 48

Maintenance and checks, tables 94Motorcycle overview 150

M

I

LLevels– brake fluid 115– clutch fluid 117– coolant 111– engine oil 108License plate light, bulb replacement 136Location of controls and instruments 38Lubricants and fluids, table 105

Parking 78Preriding checks 80Prolonged inactivity 141Purpose of manual 10

P

- 9 -

INDEX

Rear light and brake light,bulb replacement 135Rearview mirrors, adjustment 87Refuelling 76Replacing parts, general information 128Running-in 52

R

Safety 20– labels, location 32– recommendations for safe riding 27– rules 21– visual and acoustic signals 37Scheduled maintenance tables 94Side fairing, right-hand,removal/refitting 106Sidestand 39Specifications 158Spring preload 89Steering damper, adjustment 87Suspensions– front, adjustment 88– rear, adjustment 90Symbols 11

S

Tampering, note 20Tools and accessories supplied 104Topping up– coolant 112– engine oil 109Troubleshooting flow chart– electrical equipment 147– engine 142Turn indicators– front, bulb replacement 133– rear, bulb replacement 134Tyres, check 118– puncturing 119– replacement 120

T

Vehicle– identification number 13– load 25– modifications 26

V

Warning lights 49Warranty– Booklet, Service Coupons and Dealers’

Guide 12

W

- 10 -

GENERAL INFORMATION 1

11.1. Purpose of the manual

In addition to providing directions on operation and mainte-nance, this manual contains important information about gen-eral safety: READ THE MANUAL OVER CAREFULLYBEFORE FIRST USING THE MOTORCYCLE.

The manual describes the model with the maximum equip-ment at print time.

This manual must be considered as a part of your motorcycle.It must always be kept in the glove compartment, and it mustbe included with the vehicle even if this one is sold back toanother owner.

- 11 -


11.2. Symbols

Sections of text that are particularly important in terms of personal safety or possible damage to themotorcycle are marked with the following symbols:

Danger - Failure to observe these prescriptions, even in part, may pose a serious hazardto the driver’s and other people’s safety.

Caution - Failure to observe these prescriptions, even in part, may result in damage to themotorcycle.

The following symbols give an indication of who is supposed to perform the different adjustments and/ormaintenance operations:

Information on operations that can be carried out by the user.

Information on operations that must be carried out only by authorized personnel.

The following symbols are used to provide further information:

The “ ” symbol points out the requirement to use a tool or a special equipment inorder to correctly perform the described operation.

§ The “ § ” symbol refers the reader to the chapter identified by the number that follows.

- 12 -


11.3. Warranty Booklet and Service Coupons

Besides this Use and Maintenance Manual, the vehicle isaccompanied by the following documents: a Warranty Bookletcontaining a Warranty and Pre-Delivery Certificate and recom-mended service coupons, and the MV Agusta Dealers’ Guide.

IMPORTANTThe copy of the Warranty and Pre-Delivery Certificate to besent to MV Agusta must be filled in by the dealer and returnedto the factory within 10 days from the date of registration.

Every time the vehicle is serviced by a dealer, the user mustproduce the Warranty Booklet so that the dealer can fill in theservice coupon and return it to MV Agusta within 10 days fromthe date of the servicing.

- 13 -


1

1.4. Identification data

1) vehicle identification number2) engine serial number3) homologation data

Motorcycle identificationThe motorcycle is identified by the vehicle identi-fication number. When placing orders for spareparts, in addiction to this number, you may be

required to provide the engine serial number andthe key identification.

We recommend writing down the main numbersin the spaces provided below.

FRAME No.:

ENGINE No.:

2) engine serial number

1) vehicle identification number 3) homologation data

- 14 -


1

ZCG F4 01 AA Y V 000000

Manufacturer’s Letter Code

Motorcycle model

Progressive vehicle number

Here below you can find a description of a vehicle identification number:

The vehicle identification number must be provided each time you need to contact the MV AgustaTechnical Assistance Service, in order to guarantee the traceability of your motorcycle.

- 15 -


1Motorcycle key identificationA key is supplied in duplicate for both the ignition and allthe locks. Keep the duplicate in a safe place.

When placing orders for spare keys, you may be requi-red to provide the key identification number. We recom-mend writing down this number in the space providedbelow:

KEY No.:

key identification number

- 16 -


1

10 911

8 7

6

5 4 3 2

1

-17 -


1

1. - Front fairing;2. - Left-hand rearview mirror;3. - Right-hand rearview mirror;4. - Air box;5. - Fuel tank;6. - Tail section;7. - Fuel tank left-hand side fairing;

8. - Fuel tank right-hand side fairing;9. - Left-hand side fairing;10.- Right-hand side fairing;11.- Undercowl:

Black Painting - CRC 1951-6(Code PPG ∗0036/1 + Code PPG ∗0036/2)

Bodywork parts reference coloursBodywork parts are painted with the following reference colours:

- 18 -


1

12

14

15 16

17 18

13

- 19 -


1

12.- FrameMetal Bronze Painting(Code Palinal 211E144)

13.- Front wheel rimAluminium Grey Painting(Code Sebino 35204189) +Clear Painting(Code Sebino 35209052)

14.- Rear wheel rimAluminium Grey Painting(Code Sebino 35204189) +Clear Painting(Code Sebino 35209052)

15.- Right-hand electrical equipment coverBlack Painting - CRC 1951-6(Code Palinal 211E357)

16.- Left-hand electrical equipment coverBlack Painting - CRC 1951-6(Code Palinal 211E357)

17.- Right-hand rearview mirror standMetal Bronze Painting(Code Palinal 211E144)

18.- Left-hand rearview mirror standMetal Bronze Painting(Code Palinal 211E144)

Frame parts reference coloursFrame parts are painted with the following reference colours:

- 20 -

SAFETY INFORMATION 2

2

2.1. Safety

2.1.1. NOTE ON TAMPERING

Tampering with the noise control system is pro-hibited. In particular, the law prohibits the follow-ing acts:1. The removal or rendering inoperative, other

than for purposes of maintenance, repair, orreplacement, of any device or element ofdesign incorporated into any new vehicle for thepurpose of noise control prior to its sale or deliv-ery to the ultimate purchaser or while it is in use.

2. The use of the vehicle after such device or ele-ment of design has been removed or renderedinoperative.

Acts presumed to constitute tampering include:1. The removal or piercing of the exhaust

silencer, the diaphragm, the manifolds, or anyother components involved in the transmissionof exhaust gases.

2. The removal or piercing of any part of theintake system.

3. Poor maintenance.4. The replacement of any movable parts of the

vehicle or of any intake or exhaust compo-nents with parts or components other thanthose prescribed by the manufacturer.

NOTEIf you notice a progressive increase of the noiselevel of your motorcycle, MV Agusta recommendsto have your noise control system controlled andif necessary replaced.Otherwise, riding with a defective muffler cansubject you to the penalties prescribed by stateand local provisions.

- 21 -


2

2.1.2. SAFETY RULES

IMPORTANT: READ BEFORE USE

Before riding, carefully read this manual so asto familiarize yourself with the controls, character-istics, working and limits of the motorcycle. Themanual is aimed at providing information on someof all the possible techniques and methodsrequired for safe riding.

Do not attach a sidecar, a trailer or any otheraccessory to the motorcycle. Failure to observethis warning may make the vehicle unstable andcause serious accidents.

To ensure maximum reliability and maintainthe vehicle in perfect working order, it is essentialto perform the servicing detailed in the ScheduledMaintenance Table and to follow all the instruc-tions provided in this manual. For further infor-mation, speak with your dealer, who will have thenecessary technical skills and information toassist you.

MV Agusta continually strives to improve thequality of all of its motorcycles. Therefore, modifi-cations that improve the performance of the bikeare made as soon as they are developed.Therefore, your motorcycle may not be describedexactly by the illustrations and text contained inthis manual.

If you find difficulties in understanding any pic-ture or information contained in this manual, con-tact your MV Agusta dealer to obtain the neces-sary explanations.

If you find difficulties in reading any informationcontained in this manual, contact your MV Agustadealer.

In order to avoid compromising handling andstability of your motorcycle, you should obey thefollowing warnings:

• do not attach any object to the vehicle;• do not remove any part and/or component;• do not modify the vehicle in any way;• do not wear garments that could adversely

affect control and handling of the motorcycle.

- 22 -


2

Do not ride this motorcycle if you do not pos-sess a regular driving licence. Failure to heed thiswarning constitutes a breach of the HighwayCode, besides posing a serious hazard to the dri-ver’s and other people’s safety.

Do not try to service or repair this motorcycle ifyou do not possess the necessary skills.

Motorcycle riding demands your completeattention. Do not ride if you are ill, in poor physi-cal condition, or because of worry, etc., unable toconcentrate on the task at hand.

Always wear a helmet, even on short rides.Always wear suitable clothes, especially when

travelling by night (e.g. garments with fluorescentbands).

When refuelling, switch off the engine andrefrain from smoking.

When refuelling, stay away from the vehicle toavoid inhaling harmful fumes. Should the fuelcome into contact with the skin or clothes, imme-diately wash with water and change the contami-nated garments.

Since petrol is highly flammable, avoid spillingthe fuel onto the tank and the exhaust pipes whenrefuelling.

Do not start the engine in closed places.Exhaust gases are toxic and can quickly saturatethe air and cause fainting or even death.

Before starting the engine in a closed place,ensure that the area is well ventilated.

When travelling during the day, use the low beam.While the vehicle is in motion, always rest the

feet on the specially designed supports.While riding, always keep both hands on the

handlebars.Park the vehicle where it is unlikely to be

bumped into or damaged. Even slight or involun-tary bumps can cause the vehicle to topple over,with subsequent risk of serious harm to people orchildren.

To prevent the vehicle from tipping over, neverpark it on soft or uneven ground, nor on asphaltstrongly heated by the sun.

- 23 -


2

Engine and exhaust pipes become very hotduring riding. Always park your motorcycle wherepeople or children can not easily reach theseparts, in order to avoid serious burns.

Do not cover your motorcycle with a canvassoon afterwards riding. Before covering yourmotorcycle, wait until the engine and the exhaustpipes have thoroughly cooled.

If your motorcycle has been involved in anaccident, check all levers, wires, hoses, brakecalipers and other main parts for damage. Do notuse the vehicle if you detect a damage that couldadversely affect safety. Have all the main partschecked by an authorized MV Agusta dealer, inorder to verify the absence of defects and/or

damages that the owner could not be able todetect.

2.1.3. INSTALLING ACCESSORIES

MV Agusta provides a range of accessories spe-cially designed for your vehicle. It is essential thatthese accessories are installed by an MV Agustadealer.

WARNINGUse only MV Agusta original acces-sories. The use of non-genuine acces-sories can make the vehicle unsafe byreducing its handling, stability and theeffectiveness of the braking system. Forthis reason, the installation of any non-genuine accessory makes the warrantynull and void and relieves MV Agusta ofall responsibility.

Parts at high temperature

- 24 -


2

Every time you apply accessories that affectthe weight and/or the aerodynamic characteristicsof your motorcycle, they must be assembled on itslower side and near to its center, as much as it ispossible. The brackets and the anchor bolts mustbe carefully checked after the assembling, toensure a stable framework and an unmovablesupport for the accessory. In fact, an eventualbreaking of these stands could cause dangeroussituations during riding.

Verify that the assembling of the accessoriesdoes not cause a reduction of the minimum groundclearance and of the inclination of your motorcy-cle. Moreover, verify that the assembling of theaccessories does not cause any interference withthe handling of the steering system, with the travelof the suspensions and/or with the movement ofany other component involved in driving.

Any accessory positioned on the handlebar oron the front fork can reduce the handling andadversely affect the stability of the vehicle.

Therefore, the choice of the accessories shouldbe accurate and restricted to components of lightweight and small dimensions only.

Your motorcycle could undergo lightening orother instability effects in case of wind blowingsideways and transversely; this may also happenwhen your motorcycle runs into or it is overtakenby vehicles of great dimensions. Under these con-ditions, the accessories adversely affect your dri-ving safety, especially if they are incorrectlyassembled or of the wrong type. It is thereforenecessary to pay great attention in choosing andassembling any accessory.

Some accessories force the rider to drive in anunnatural position. This may obviously restrictyour freedom of movement and cause loss of con-trol of the vehicle.

Additional electric accessories can cause anoverload of the electrical system of your motorcy-cle; this could damage the wires, causing dangerof short circuit and electric shock.

- 25 -


2

2.1.4. VEHICLE LOAD

This motorcycle is designed for use by the rideronly. To use the vehicle in complete safety andrespect of the Highway Code provisions, it isessential not to exceed the maximum weight ofthe motorcycle, which corresponds to 325 kg.This value comes out from the sum of the follow-ing weights, according to the European standardCEE 92/61:

• weight of the motorcycle;• weight of the driver;• weight of the load and all the accessories.

WARNING: Since the load can stronglyaffect handling, braking, performanceand safety characteristics of yourmotorcycle, you should always keep inmind the following warnings.• NEVER OVERLOAD YOUR MOTOR-CYCLE! Driving an overloaded motorcy-cle can cause damage to the tyres, lossof control of the vehicle and serious

injury. Verify that the total weight (inclu-ding the weight of the motorcycle, thedriver, the load and all the accessories)does not exceed the maximum loadvalues specified for your vehicle.• Never carry any incorrectly fastenedobject on your motorcycle, because itcould move from its position during riding.• Steadily fasten the heaviest objects nearthe center of the motorcycle, and equallydivide the load on both sides of the vehicle.• Do not insert any object or accessoryin the spaces on the frame trellis, inorder to avoid interferring with themovable parts of the motorcycle.• Before riding, always check the wearand the pressure of the tyres.• Adjust the suspensions according tothe load.• Even if the motorcycle is correctlyloaded, drive with caution and neverexceed 130 km/h when you carry a load.

- 26 -


2

2.1.5. MODIFICATIONS

MV Agusta suggests neither to remove any origi-nal device, nor to modify the motorcycle in anyway that could change its shape or its working.

WARNINGAny modifications made to the vehicle(e.g. alteration and/or removal of com-ponents) can make the vehicle unsafe orunlawful. MV Agusta cannot be heldresponsible for any damage to peopleand objects subsequent to eventualmodifications made to the original con-ditions of your motorcycle. Modifyingthe vehicle immediately voids the war-ranty and relieves MV Agusta of allresponsibility.

2.1.6. COMPETITIONS

WARNINGRiding the vehicle in competitionsrequires considerable skill and experi-ence as well as an accurate setup of themotorcycle.

MV Agusta has designed a number of specialcomponents for use in competitions and/or sport-ing events. The use of such components is strict-ly limited to areas closed to traffic. Failure toobserve this restriction constitutes a breach of theHighway Code for which MV Agusta cannot beheld responsible.

- 27 -


2

2.1.7. RECOMMENDATIONS FOR SAFE RID-ING

Besides being a means of transport, your motor-cycle is a source of recreation and excitement.However, the configuration of the vehicle does notexclude a certain amount of risk. To ensure maxi-mum safety, in addition to scrupulously observingthe warnings and instructions provided in the pre-vious paragraphs, it is essential to take a fewadditional precautions.In particular:

Before starting offFollow all the directions given in the section “PRE-RIDING CHECKS”. Conduct an overall check ofall safety-related aspects of the motorcycle.

Familiarizing with the vehicleThe rider’s ability and his mechanical skills formthe basis of riding safety. It is advisable to practiseriding in areas without traffic until you havebecome familiar with the vehicle and its controls.

Being aware of one’s limitsWhen riding, never exceed your limits nor thoseimposed by law. Being aware of your limits andacting accordingly will help you avoid accidents.

Adverse weather conditionsBe very careful when riding in adverse weatherconditions. On wet roads, for example, the brak-ing distance increases as a result of reduced tyretraction. It is therefore necessary to travel at mod-erate speed and avoid abrupt braking and accel-eration. Pay particular attention when riding onslippery surfaces such as road markings, man-holes, level crossings, bridges, gratings, etc.Considering that a motorcycle cannot provide thesame degree of shock protection as a motor vehi-cle, it is essential to adopt a “defensive” riding atti-tude, particularly in the adverse weather condi-tions described above.

- 28 -


2

Keeping even one foot or hand away fromtheir designed supports could cause loss of con-trol of the vehicle and increase the risk of acci-dents. Always keep both hands on the handlebarsand both feet on the footrests during riding.

Change gears as necessary to ensure that theproper gear ratio is chosen in all riding conditions,allowing the engine to run at optimum speed at alltimes. Avoid high gear ratios when travelling atreduced speed (excessively low rpm) as well aslow gear ratios when travelling at high speed(excessively high rpm).

Always operate the clutch system when youchange gear, in order to avoid damage of theengine, of the gearbox and of the transmission.These components have not been designed totake the shocking stress caused by the forcedcoupling of a gear.

Do not keep the clutch disengaged for a longtime during riding, unless you have to changegear. Failure to heed this warning may lead to the

overheating and to the abnormal wear of the clut-ch components.

When rapid acceleration is required (e.g. whenpassing), select a lower gear to obtain betteracceleration.

When the motorcycle is being ridden at highspeed, gearing down several times in rapid suc-cession can cause the engine to overspeed. As aresult, the rear wheel may lock, causing loss ofcontrol of the vehicle, as well as damage to theengine and transmission.

When riding down long hills, reduce the speedof your motorcycle by closing the throttle andusing a low gear ratio to take advantage of enginebraking. Use the front and rear brakes as little aspossible to maintain your speed, in order to pre-vent brake overheating and fade.

Special attention should be given to the brakingsystem, which plays a key role in ensuring safety.When braking, always take account of the speed ofthe vehicle and the condition of the road surface.

- 29 -


2

The braking action should always be applied gen-tly and gradually to both wheels.Performing this operation and, more in general,riding the vehicle always requires the utmostcare. Therefore, caution should be exercised byall users, and in particular by inexperienced rid-ers.

When you make a turn, avoid sudden braking.Failure to observe this warning could lead to thesliding of the wheels and the loss of control of thevehicle. Always operate the brakes before startinga turn.

When you are laterally blown by a sudden gustof wind (as it may happen when you’re overtakenby a vehicle of great dimensions, when you comeout of a tunnel or when you’re driving in a hillyzone), you could lose control of the vehicle. Whiledriving under the above mentioned conditions,reduce your speed and be careful to avoidsideways gusts of wind.

Maintain a safe distance behind vehicles infront of you and adjust your speed to the weatherand traffic conditions. Remember that, as yourbike picks up speed, stopping distances increaseand the motorcycle becomes more difficult to con-trol. In any case, never exceed the speed limitsimposed by the Highway Code.

When travelling during the day keep the lowbeam on, in order to be better seen by other roadusers.

It is strictly forbidden to drink alcoholic bever-ages or take drugs before riding. Even very smallamounts of these substances adversely affect therider’s ability to control the vehicle.

- 30 -


2

2.1.8. PROTECTIVE CLOTHING

Helmet wearing is compulsory under the HighwayCode. Helmet is the most important part in thebiker’s protective clothing, because it protects himfrom head injury in the event of an accident.Always fasten your helmet properly and securely.If you wear an open-face helmet, also wear gog-gles. Without a protective shield, in fact, windracing on your face during driving could reduceyour visual capacity, increasing the risk of acci-dents.

WARNINGFailure to wear a helmet increases therisk of serious injury or even death inthe event of an accident. Make sure thatyou always wear an approved helmetduring driving. If you wear an open-facehelmet, also wear protective glasses.

Always wear suitable protective clothing. In par-ticular, the following items should be worn:

A close fitting jacket, made of tough materialand easy to fasten.

Supple, reinforced gloves providing both sen-sitivity and protection.

Strong, close-fitting trousers covering the legscompletely.

Soft, reinforced boots providing both sensitivi-ty and protection.

The items mentioned above are available fromany specialized shop.

We recommend buying brightly coloured clothes,as they make the rider easier to see at night andin the fog.

In any case, the clothes must allow completefreedom of movement and not hamper the rider inany way. In addition, they must have no looseparts capable of catching in the control levers, thefootrests, the wheels, the drive chain, etc., inorder to avoid dangerous situations.

- 31 -


2

WARNINGProtective clothes do not afford com-plete protection against the risk of per-sonal injury in the event of an accident.It is therefore essential not be deceivedby the false sense of security that youmight perceive by wearing protectiveclothing. When riding, always adopt acautious attitude and follow the recom-mendations given in the previous para-graphs.

2.1.9. SUGGESTIONS AGAINST THEFT

1. Every time you park your motorcycle, operatethe steering lock and remove the ignition key(see § 3.5.).

2. Park your motorcycle in a closed garage everytime it is possible.

3. Install a good quality anti-theft device on yourvehicle.

4. Always keep up to date the registration data ofyour motorcycle.

5. Write down your name, address and phonenumber in the spaces provided down below,and always keep this owner’s manual insidethe glove compartment of your motorcycle(see § 4.6.). This is very important, because astolen motorcycle can be subsequently identi-fied by reading the informations written in themanual found inside it.

NAME:

ADDRESS:

PHONE NUMBER:

- 32 -


2

2.2. Safety Labels - Location

1 - Windscreen warning2 - Steering damper3 - Unleaded petrol4 - Battery warning5 - Tyre pressure6 - Rear wheel hub warning7 - Chain adjustment

NOTEThe labels in the following pagesdo not appear in their real size. Ifyou find difficulties in under-standing any of these labels,contact an authorized MV Agustadealer.

7 65

INFORMAZIONI IMPORTANTI

PNEUMATICI PIRELLI PNEUMATICI MICHELINANT. 2.2 Kg/cm 32 psi2

POST.2.4 Kg/cm 35 psi2ANT. 2.5 Kg/cm 36 psi2

POST.2.3 Kg/cm 33 psi2

1 2 3

4

ATTENZIONE - WARNING

CUPOLINO CON FUNZIONE AERODINAMICA,NON GUARDARE ATTRAVERSOIL VETRINO DURANTE LA MARCIA. LA NON OSSERVANZA DI QUESTOAVVISO POTREBBE CAUSARE SERIE CONSEGUENZE ALLE PERSONE.WINDSCREEN HAS AERODYNAMIC FUNCTION ONLY, DO NOT LOOKT H R O U G H I T W H I L E R I D I N G . FA I L U R E T O R E S P E C T T H I SCOULD CAUSE SERIOUS BODILY HARM.


VERIFICARE, PRIMA DI OGNI PARTENZA, LA REGOLAZIONE DELL'AMMORTIZZATORE DI STERZO.

UTILIZZARE SOLO BENZINA VERDE 95 - 98 R.O.N.BEFORE EVERY START, CHECK THE STEERING DAMPER SETTING.

USE ONLY UNLEADED GASOLINE 95 - 98 R.O.N.PRIMA DELL'USO, LEGGERE ATTENTAMENTE IL MANUALE DI USO E MANUTENZIONE.BEFORE USING, READ CAREFULLY THE OWNER'S MANUAL.

- 33 -


2ATTENZIONE - WARNING

CUPOLINO CON FUNZIONE AERODINAMICA,NON GUARDARE ATTRAVERSOIL VETRINO DURANTE LA MARCIA. LA NON OSSERVANZA DI QUESTOAVVISO POTREBBE CAUSARE SERIE CONSEGUENZE ALLE PERSONE.WINDSCREEN HAS AERODYNAMIC FUNCTION ONLY, DO NOT LOOKT H R O U G H I T W H I L E R I D I N G . FA I L U R E T O R E S P E C T T H I SCOULD CAUSE SERIOUS BODILY HARM.


VERIFICARE, PRIMA DI OGNI PARTENZA, LA REGOLAZIONE DELL'AMMORTIZZATORE DI STERZO.

UTILIZZARE SOLO BENZINA VERDE 95 - 98 R.O.N.BEFORE EVERY START, CHECK THE STEERING DAMPER SETTING.

USE ONLY UNLEADED GASOLINE 95 - 98 R.O.N.PRIMA DELL'USO, LEGGERE ATTENTAMENTE IL MANUALE DI USO E MANUTENZIONE.BEFORE USING, READ CAREFULLY THE OWNER'S MANUAL.

1. ADHESIVE LABEL

WINDSCREEN WARNING

2. ADHESIVE LABEL

STEERING DAMPER

- 34 -


2

4. ADHESIVE LABEL

BATTERY WARNING

3. ADHESIVE LABEL

UNLEADED PETROL

- 35 -


2

6. ADHESIVE LABEL

REAR WHEEL HUBWARNING

INFORMAZIONI IMPORTANTI

PNEUMATICI PIRELLI PNEUMATICI MICHELINANT. 2.2 Kg/cm 32 psi2

POST.2.4 Kg/cm 35 psi2ANT. 2.5 Kg/cm 36 psi2

POST.2.3 Kg/cm 33 psi2

5. ADHESIVE LABEL

TYRE PRESSURE

- 36 -


2

7. ADHESIVE LABEL

CHAIN ADJUSTMENT

- 37 -


2

2.3. Safety - Visual and acousticsignals

Before each ride, it is essential toverify the operation of the visualand acoustic signals.

Turn indicators (§3.3.)

Parking light, low and high

beams (§3.3.)

Parking light (§3.3.) and brake light

(lights up operating the brakes)

Horn (§3.3.)

Turn indicators (§3.3.)

Plate light (lights up when parking

lights are turned on)

- 38 -

CONTROLS AND INSTRUMENTS 3

3

3.1. Location of controls and instruments

Instruments and warning lights (§ 3.7)

Clutch lever (§ 5.1)

Rearview mirror (§ 5.1)

Left handlebar electrical controls (§ 3.3)

Fuel tank cap (§ 4.5)

Gear lever (§ 3.6 and § 5.1)

Sidestand (§ 3.2)

Ignition switch and steering lock (§ 3.5)

Footrest (§ 5.1)

Rearview mirror (§ 5.1)

Front brake lever (§ 5.1)

Throttle twist grip (§ 3.4)

Rear brake lever (§ 5.1)

Footrest (§ 5.1)

Right handlebar

electrical controls (§ 3.4)

Left side Right side

- 39 -


3

3.2. Sidestand

The sidestand is equipped with asafety switch that prevents themotorcycle from moving off whilethe stand is down.If the rider attempts to engage thegears while the engine is runningand the stand is down, the switchautomatically turns off the engineby cutting the current supply.If the motorcycle is parked (side-stand down) and the gears areengaged, the switch prevents theengine from being started, therebyavoiding the risk of accidentally top-pling the vehicle.

Sidestand

Dual return spring

Safety switch

- 40 -


3

3.3. Handlebar controls, left side

High beam flasher buttonPress the button repeatedly.

Low/high beam buttonButton not pressed in : low beamButton pressed in : high beam

Turn indicator switchShifting the lever to the left or right switches on the leftor right turn indicators. The switch then returns to thecentral position. Press to turn off the indicators.

Horn buttonPress to operate the warning horn.

Clutch leverMove towards/away from the handgrip torelease/engage the clutch.

- 41 -


3

High beam flasher buttonIt is used to attract the attention of other road users in case of danger. When the high beam is on, thefunction is inactive.

Low/high beam buttonUnder normal conditions, the low beam is on. The high beam can be switched on by pressing the but-ton when allowed by the traffic and road conditions.

Turn indicator switchIt is used to show the rider’s intention to change direction or lane.

WARNINGFailure to switch the turn indicators on or off at the right time may cause an accident in thatthe other road users may draw incorrect conclusions about the direction of motion of thevehicle. Always switch on the indicators before turning or changing lanes. Then be sure toswitch off the indicators after completing the operation.

Horn buttonIt is used to attract the attention of other road users in case of danger.

Clutch leverIt engages/disengages the clutch through a hydraulically controlled device.

- 42 -


3

3.4. Handlebar controls, right side

Engine stop switchStops the engine and prevents it from being restarted.

Engine start buttonStarts the engine. To be released as soon as the engine starts.

When the engine is running, pressing the button selects the dis-play functions.

Cold start (choke) leverRotate clockwise when cold starting. After the engine has run for

a few seconds, return the lever to its original position.

Throttle twist gripRotate counterclockwise to increase engine speed.

Front brake leverPull to the lever to apply the front brake.

- 43 -


3

Engine stop switchIt is used to switch off the engine in an emergency. The ignition circuit is disabled, preventing the enginefrom being restarted. To be able to restart the engine, return the switch to its original position.

NOTEUnder normal conditions, do not use this switch to shut off the engine.

Engine start buttonIt is used to start the engine and, when the engine is running, to select the different functions of the dis-play installed on the instrument panel.

CAUTIONTo avoid damaging the electrical equipment, be sure not to hold down the button for longerthan 5 consecutive seconds.If, after some attempts, the engine does not start, refer to the chapter “TROUBLESHOOT-ING” later in this manual.

Cold start (choke) leverIt facilitates cold starting by slightly enrichening the fuel-air mixture during start-up.

NOTEThis function must remain active only for a short time depending on the engine and environ-mental temperature. As soon as the idle speed keeps the engine running, it is advisable to disa-ble the control.

- 44 -


3

Throttle twist gripIt controls the fuel-air mixture supplied to the engine, which regulates engine speed. To increase enginespeed, rotate the hand grip from its idle position counterclockwise.When cold starting (choke on), rotating the throttle twist grip clockwise fully causes the choke lever toreturn to its original position.

Front brake leverIt controls a hydraulic circuit that operates the front wheel braking system.

WARNINGIn some countries, the laws in force impose therestriction of vehicles’ engine power. Underthese conditions, the throttle twist grip of yourmotorcycle must be equipped with the mechani-cal device shown in the picture on the left. Thisdevice must neither be removed nor tampered inany way. The removal or tampering of the abovedevice leads to the following events:

• violation of the laws in force in the country inwhich you use your motorcycle;

• damage to the motorcycle;• compromising of the safety conditions;• loss of the warranty rights.

- 45 -


3

3.5. Ignition switch and steering lock

WARNINGDo not attach a ring or any other object to theignition key as they may hinder the steeringaction.

WARNINGNever attempt to change the switch functionswhile riding, as you may lose control of the vehi-cle.

The ignition switch enables and disables the electricalcircuit and the steering lock. The four positions of theswitch are described below.OFF positionAll electrical circuits are deactivated. The key can beremoved.ON positionAll electrical circuits are activated. The instruments andwarning lights perform the self-diagnostic cycle. Theengine can be started. The key cannot be removed.

CAUTIONDo not leave the key on the ONposition for a long time when theengine is not running, in order toavoid damage to the electricalparts of the motorcycle.

- 46 -


3

P (PARKING) positionTurn the key from the LOCK position to the P position.All electrical circuits are deactivated except the parkinglights. The steering is locked. The key can be removed.

CAUTIONDo not leave the key on the P position for along time, in order to avoid discharging thebattery of your motorcycle.

LOCK positionTurn the handlebar to the left or right. Press the key ingently while rotating it to the LOCK position.All electrical circuits are deactivated and the steering islocked. The key can be removed.

- 47 -


3

3.6. Gear lever

The N (neutral) position is indicated by the warning lighton the instrument panel.To change into first gear, push the lever down.To change into second gear, lift the lever up. Lifting thelever up repeatedly engages all the other gears in suc-cession up to the sixth speed.

- 48 -


3

3.7. Instruments and warning lights

The instruments and warning lights are activated by turningthe ignition switch to the ON position. After a preliminary check(approx. 7 seconds) the displayed information reflects the cur-rent general condition of the motorcycle.

Warning lights

(§3.7.1.)

SET button (§3.7.2.)

Multifunction display (§3.7.2.)

Warning light

(§3.7.1.)

Tachometer

MAX 13,600 rpm

- 49 -


3

3.7.1. Warning lights

High beam warning light (blue)Lights up when the high beam is activated.

Low beam warning light(green)

Comes on when the lowbeam is activated.

Neutral indicator (green)Lights up when the gears are in

neutral.

Turn indicator light (green)Lights up when the turn indica-

tors are activated.

Reserve fuel indicator (amber)Comes on when approximately

4 litres of fuel are left.

Battery charge indicator (red)Lights up when the alternator does not supply enoughcurrent to charge the battery.

If the indicator comes on whileriding, contact an authorized ser-vice centre.

Sidestand down warning light(red)Lights up when the sidestand isdown.

Rev limiter warning light (red)Lights up when the engine speedexceeds 13,600 rpm. The revlimiter limits the rpm to 13,900.

Engine oil pressure warning light (red)Lights up when the oil pressure is insufficient.

WARNING: If the warning light comes on whileriding, stop the motorcycle immediately. Checkand if necessary restore the oil level. If the war-ning light comes on even if the oil level is cor-rect, do not resume riding and contact an autho-rized service centre.

- 50 -


3

3.7.2. Multifunction display

SpeedometerMeasures the speed of the vehicle. The speedcan be displayed in kilometres per hour (km/h)or miles per hour (mph). The full-scale value is299 km/h (185 mph).

SET buttonPressing the button allows thesetting of the different displayfunctions. Pressing the buttonagain confirms the entered val-ues.

Pressing the SET button whilepressing the engine start buttonactivates the chronometer func-tion.

TOTAL mileage counterDisplays the total distance covered: from 0 to 99,999.9(km or mi)TRIP 1 mileage counterDisplays a first trip mileage count: from 0 to 9,999.9 (km or mi)TRIP 2 mileage counterDisplays a second trip mileage count: from 0 to 9,999.9(km or mi)ClockDisplays the time (0÷24)

ThermometerDisplays the coolant temperature in degrees centigrade(°C) or Fahrenheit (°F).The display range is 40° to 140° C (104° to 284° F):- Below 40° C (104° F) no temperature is displayed but

three blinking lines denote a verylow temperature.- Between 40° and 49° C (104°and 120° F) the temperature read-ing blinks to indicate a low tem-perature.- Between 50° and 105° C (122°and 221° F) the temperature read-ing is fixed.- Between 106° and 140° C (223°and 284° F) the temperature read-ing blinks to indicate a high tem-perature.

WARNING: If the temperature exceeds 120° C (248°F), stop the motorcycle immediately and check thecoolant level. If the coolant level is low, carefully topup the coolant, after you have allowed the engine tothoroughly cool. Never attempt to remove the coolantfiller cap when the engine is hot. If the high tempera-ture indication is given even when the coolant level iscorrect, do not resume riding and contact an authori-zed service centre (see chapter 7 “Troubleshooting”).

- 51 -

OPERATION 4

4

4.1. Using the motorcycle

This section provides the basic information needed to correctly operate the motorcycle:

- Running-in ( § 4.2. )- Starting the engine ( § 4.3. )- Selecting and setting the display functions ( § 4.4. )- Refuelling ( § 4.5. )- Glove compartment ( § 4.6. )- Parking the motorcycle ( § 4.7. )- Preriding checks ( § 4.8. )- Riding ( § 4.9. )

WARNING: The F4 SPR motorcycle shows high power and performance characteristics; therefo-re, we suggest to correctly use the clutch operation device. In particular, taking into account thespecial transmission ratio of the first two gears, we strongly recommend not to perform abruptand repeated standing starts with prolonged clutch skids. Under these conditions of use, thesubsequent temperature increase would cause a fast decay of the clutch device, with subsequentloss of efficiency and serious malfunction.

Respect and defend natural environmentEverything we do affects the whole planet as well as its resources.MV Agusta, in order to protect the interests of the community, awakens the Customers and the Technical Assistance opera-tors to use the vehicle and dispose of its replaced parts respecting the laws in force concerning environmental pollution andwaste disposal and recycling.

- 52 -

OPERATION 4

4

4.2 Running-in

CAUTIONFailure to observe the indications providedbelow can reduce performance and shortenthe life of the motorcycle.

Running-in is generally considered to apply only to theengine. In fact, it should be regarded as an essentialphase for other important parts such as the tyres, thebrakes and the drive chain. During the very first miles,adopt a relaxed riding style.

❏ 0 to 500 km (0 to 300 mi) (A)Frequently change the engine speed. If possible, preferhilly routes with gentle slopes and many bends. Avoidlong straight stretches.

WARNINGNew tyres must undergo a properrunning-in period to reach theircomplete efficiency. Avoid abruptacceleration, turning and brakingduring the first 100 km. Failure toobserve these prescriptions canlead to the sliding of the wheelsand the loss of control of the vehi-cle with subsequent risk of acci-dents.

- 53 -

OPERATION 4

4

❏ 500 to 1000 km (300 to 600 mi)Avoid lugging or overspeeding the engine, and varyyour speed frequently.

❏ 1000 to 2500 km (600 to 1600 mi)Higher engine performance can be demanded, but it isadvisable not to exceed the engine speed shown in thefigure.

- 54 -

OPERATION 4

4

4.3. Starting the engine

WARNINGStarting the engine in a closed place can bedangerous. Exhaust emissions contain car-bon monoxide, a colourless and odourlessgas that can lead to serious harm or evendeath when inhaled.Only start the engine outdoor, in the open air.

As you turn the ignition switch to the ON position, theinstruments and the warning lights will go through theself-diagnostic cycle; during this phase, make sure thatall the warning lights on the dashboard come on. One ofthe following conditions must be verified, in order that theignition switch system allows engine starting:– The gears are in neutral.– The gears are engaged, the clutch lever is pulledand the side stand is up.

❏ Cold startingRotate the CHOKE lever without turning the throttle

twist grip and then press the start button.

CHOKE lever

- 55 -

OPERATION 4

4

As soon as the engine starts, release the button and,after warming up the engine for a short time, return theCHOKE lever to its original position.

❏ Hot startingPress the start button without turning the throttle

twist grip.As soon as the engine starts, release the button.

CAUTION• Do not press the start button for longer than5 consecutive seconds.• Avoid warming up the engine while the vehi-cle is stationary. The subsequent engine over-heating can cause damage to the internalparts of the engine. It is advisable to bring theengine to the working temperature by ridingat reduced speed.• To ensure the maximum life of the engine,never speed up at full throttle when the engi-ne is cold.

- 56 -

OPERATION 4

4

4.4. Selecting and setting the display functions

The multifunction display allows to change some ofthe main measuring parameters and to activate thechronometer function.

The main possible operations are the following:

- Selection of the display functions:

TOTAL Mileage CounterTRIP 1 Mileage CounterTRIP 2 Mileage CounterClockChronometer

- Setting the unit of the following quantities:

SpeedMileageEngine Oil Temperature

- Resetting the trip mileage conters:

TRIP 1 Mileage CounterTRIP 2 Mileage Counter

- Setting the clock

- Activation of the chronometer function

- 57 -

OPERATION 4

4

4.4.1. Selecting the display func-tions

You can select the following functions:

• TOTAL Mileage Counter• TRIP 1 Mileage Counter• TRIP 2 Mileage Counter• Clock• Chronometer

The TOTAL, TRIP 1 and TRIP 2functions can be displayed by pres-sing the engine start button. Pressingthe button repeatedly cycles throughthe different functions. Select thedesired function.

The displaying of the chronometerfunction is shown in the followingpage.

WARNINGThe operation must be performed while the engine isrunning, the gears are in neutral, the motorcycle isstationary, and with the feet on the ground. Do not setthe display functions while riding as it may causeloss of control of the vehicle.

OPERATION 4

4

❏ Chronometer

The chronometer function can be activated onlywhen one of the following functions is selected:

• TOTAL Mileage Counter• TRIP 1 Mileage Counter• TRIP 2 Mileage Counter• Clock

Press the SET button and the engine start button atthe same time for longer than 2 seconds.

Chronometer function

The chronometer function is explained in the following paragraphs (see § 4.4.5).

- 58 -

- 59 -

OPERATION 4

4

4.4.2. Setting the measurement units

It is possible to set the measurement units of thedisplayed quantities.

WARNINGThe operation must be performed while theengine is running, the gears are in neutral, themotorcycle is stationary, and with the feet onthe ground. Do not set the display functionswhile riding as it may cause loss of control ofthe vehicle.

❏ Speedometer (Km/h - Mph)

Repeatedly press the engine start button until theTOTAL mileage counter is displayed.

Press the SET button; the speedometer unit startsblinking.

- 60 -

OPERATION 4

4

Press the engine start button to toggle betweenKm/h and Mph. Changing the speedometer unit alsochanges the units for the total and trip mileage counters.

Remember that: 1 mi = 1,609 Km

Press the SET button to confirm the speedometerunit. The thermometer unit will start blinking, indicatingthat the display is ready for the next setting.

- 61 -

OPERATION 4

4

❏ Thermometer (° C - ° F)

Press the engine start button to toggle between ° Cand ° F.

Remember that: T (°F) = 1.8 • t (°C) + 32

Press SET to confirm the temperature unit.

- 62 -

OPERATION 4

4

4.4.3. Resetting the trip mileage counters

The TRIP 1 and TRIP 2 counters can be reset as fol-lows:


Select the TRIP 1 function by pressing the enginestart button.

Press the button for longer than four seconds. TheTRIP 1 mileage will start blinking.

- 63 -

OPERATION 4

4

Pressing the button for less than four seconds setsthe mileage to zero. If, on the other hand, the button ispressed for longer than four seconds the entire resettingprocedure is cancelled.

Select the TRIP 2 function by pressing the enginestart button.

- 64 -

OPERATION 4

4

Press the engine start button for longer than fourseconds; the TRIP 2 mileage will start blinking.

Pressing the button for less than four seconds setsthe mileage to zero. If, on the other hand, the button ispressed for longer than four seconds the entire resettingprocedure is cancelled.

- 65 -

OPERATION 4

4

4.4.4. Setting the clock

It is possible to set the clock function.


Repeatedly press the engine start button until thetime is displayed.

Press the SET button – the first hour digit will startblinking.

- 66 -

OPERATION 4

4

Hold down the engine start button and release it assoon as the desired figure is displayed.

NOTETo quickly cycle through the selected digit, hold thestart button depressed for longer than two seconds.

Press SET to confirm the first hour digit and to beable to set the following digit.

Repeat the procedure to set the second hour digitand the first and second minute digits.

Press SET to confirm the time and exit the set(blinking) mode.

NOTEThe instrument panel has an integrated memorywhich retains all the parameters even when the engi-ne is not running. Except for the clock, which isreset, all the parameters are retained even when thebattery is disconnected.

- 67 -

OPERATION 4

4

4.4.5. Chronometer

The chronometer fuction can be activated only whenone of the following functions is displayed:

• TOTAL Mileage Counter• TRIP 1 Mileage Counter• TRIP 2 Mileage Counter• Clock

Press the SET button and the engine start button atthe same time for longer than 2 seconds. The chrono-meter function is activated. The digits “00:00.0” aredisplayed.


- 68 -

OPERATION 4

4

❏ Lap Time Recording

After the chronometer function has been activated, it ispossible to begin the data storing by pressing the highbeam flasher button. Performing this operation startsthe first lap time measurement.The two points between the minutes and seconds digitswill start blinking. The instrument will start measuringthe first lap time.

START

- 69 -

OPERATION 4

4

The first lap time is recorded by pressing the high beamflasher button again. At the same time, the instrumentwill start measuring the second lap time.

The first lap time is stored in the instrument memory,and it remains displayed until the next lap time is recor-ded.

LAP 01

- 70 -

OPERATION 4

4LAP 02

LAP 03

LAP - -

LAP 80-

Repeating the above mentioned operations, you recordone lap time every time you press the high beam button. The instrument can perform up to 80 consecutive recor-dings.

If the present lap time is lower than the previous one,the symbol “ – “ is displayed near the chronometerdigits.

- 71 -

OPERATION 4

4

❏ Lap Time Displaying

At the end of the lap time recording, it is possible todisplay the stored data.

NOTEMake sure not to shut off the engine. This wouldcause the loss of all the stored data.

Press the SET button for a time longer than 0.25 secand less than 2 sec.

NOTEPressing the SET button for longer than 2 secondswould cause the loss of all the stored data.

The “LAP 01” writing is displayed; after one second,the display shows the time corresponding to the firstrecorded lap.

- 72 -

OPERATION 4

4

The writing “LAP 02” is displayed by pressing the highbeam flasher button; after one second, the display showsthe time corresponding to the second recorded lap.

Repeatedly pressing the high beam flasher button,the following lap times are displayed. After the last laptime has been displayed, the display shows the first lapdata (“LAP 01”) by pressing the high beam button oncemore.

- 73 -

OPERATION 4

4

❏ Fastest Lap Time Displaying

Make sure that the display is on the lap timedisplaying mode, and that the first lap data aredisplayed (“LAP 01”).

Press the SET button for longer than 2 seconds.

NOTEPressing the SET button for less than 2 secondswould cause the exit from the lap time displayingmode.

The number of the fastest lap is displayed; after onesecond, the display shows the corresponding fastest laptime.

- 74 -

OPERATION 4

4

❏ Return to the Lap Time Recording mode

Pressing the SET button for longer than 0.25 secand less than 2 sec, the display returns to the lap timerecording mode. By now, you can continue your pre-vious timing session or begin a new one.

The display shows the time corresponding to the laststored lap.

NOTEWhen you return to the lap time recording mode, thedigits “00:00.0” will be displayed if no lap time hasbeen previously stored.

- 75 -

OPERATION 4

4

❏ Resetting the chronometerYou can reset the chronometer by pressing the SET but-ton for longer than 2 seconds. This operation will cancelall the previously stored data from the instrumentmemory.

NOTEOnce you cancel the previously stored data, theycannot be retrieved.Chronometer resetting can also be performed whenthe chronometer function is active. In this case, thetiming session will be stopped.

After resetting the chronometer, the digits “00:00.0” willbe displayed.

- 76 -

OPERATION 4

4

4.5. Refuelling

WARNINGPetrol and its fumes are highly toxic and flam-mable. Avoid contact and inhalation.When refuelling, switch off the engine, avoidsmoking, and keep away from flames, sparksand heat sources. Perform refuelling in theopen air or in a well ventilated area.

CAUTIONOnly use unleaded fuel with a R.O.N. octanerating of 95 or higher. The green dot on thelower side of the tank cap and the steeringdamper label upon the fuel tank serve as areminder of this.

Lift the dust cover.Insert the key into the lock, rotate it clockwise and lift

the tank cap.After refuelling, press down the tank cap while rotat-

ing the key clockwise to facilitate the locking. Thenrelease the key and remove it.

- 77 -

OPERATION 4

4

4.6. Glove compartment

Insert the key into the lock.Press the rearmost portion of the tail section

down while turning the key clockwise.Gently lift the tail section while gently pulling

backwards. Fold the tail section up over the fueltank.

WARNINGOverfilling the tank may cause the fuel to overflow as a result of the expansion due to theheat from the engine or to exposure to sunlight. Fuel spills can catch fire. The level of thefuel in the tank must never be higher than the base of the filler.

CAUTIONImmediately wipe the overflown fuel with a clean cloth, to avoid damage to the painted orplastic surfaces.

WARNINGVerify that the tank filler cap is correctly closed before using the motorcycle.

- 78 -

OPERATION 4

4

4.7. Parking the motorcycle

❑ Using the sidestand

CAUTION• Park the motorcycle safely on solidground.• On slopes, engage the first gear and parkthe vehicle so that the front wheel facesuphill. Remember to put the gear lever in theneutral position before restarting the engine.• Never leave the vehicle unattended whilethe engine key is in the dashboard.

Using your foot, lower the sidestand as far as it willgo, and then slowly tip the motorcycle toward you tobring the stand supporting foot into contact with theground’s surface.

- 79 -

OPERATION 4

4❏ Using the rear standInsert the stand pin into the rear wheelaxle hole on the left side of the motorcy-cle. Rest the stand on the ground and,pressing down on the stand, lift the vehi-cle until it reaches a stable condition.

CAUTIONThis operation is best carriedout with two people, one tosteady the motorcycle and oneto manipulate the rear stand.

WARNINGDo not sit on the vehicle when it is parked on the sidestand, as your full weight would reston the vehicle’s only support.

WARNINGBefore riding off, ensure that the sidestand warning light on the instrument panel goes out.In any case, make sure that the stand has been retracted.If you notice a malfunction of the side stand switch, have it controlled by your MV Agustadealer before using the motorcycle.

- 80 -

OPERATION 4

4

4.8. Preriding checks

WARNINGA motorcycle can be in good runningorder and then become unexpectedlyunreliable even if unused (e.g. deflationof the tyres). It is therefore important tocarry out the checks described in thetable below before each ride. A fewmoments taken to carry out these checkswill help you maintain your motorcyclesafe and in perfect working order.

BrakesCheck fluid level (§ 6.8).Check for fluid leakage.Pull lever and press pedal to check brake operation.Lubricate the lever joint, if necessary.Check pads for wear (§ 6.7.)Gear leverPress pedal to check gear operation.Lubricate the lever joint, if necessary.Engine start button / stop switchCheck operation (§ 3.4).

Clutch leverCheck fluid level (§ 6.9).Check for fluid leakage.Pull lever and check that it moves smoothly and gradually.Lubricate the lever joint, if necessary.Throttle twist gripCheck that grip rotates smoothly and returns to closedposition when released.Steering systemVerify that the operation is smooth and uniform.Check for play and loosening.Steering damperCheck adjustment (§ 5.6).Lights, visual and acoustic signalsCheck operation.TyresCheck inflating pressure and wear (§ 6.10).SuspensionsVerify that the operation is smooth and uniform.Check adjustment (§ 5.7 and § 5.8).Frame fastenersCheck tightening of all screws and nuts.Tighten them, if necessary.Drive chainCheck adjustment and lubrication (§ 6.11).

- 81 -

OPERATION 4

4

CoolantCheck level (§ 6.6).Check for leakage.Engine oilCheck level (§ 6.5).Check for leakage.FuelCheck level.Refuel, if necessary (§ 4.5).Check for fuel leakage.SidestandCheck return to stowed position.

WARNINGIf any of the above-mentioned partsshows a failure during its operation,have it controlled and repaired beforeusing the motorcycle.

- 82 -

OPERATION 4

4

4.9. Riding

Riding a motorcycle requires experience and concentration.Inexperienced riders should undergo a period of training and attend an introductory course consisting oftheoretical lessons as well as practical riding sessions in areas closed to traffic.The instructor’s advice will help the novice rider become familiar with the basics of riding safety.Relying on the advice of persons other than a qualified riding instructor, even if possessing specificknowledge, may prove to be useless or even dangerous, especially if the practical training takes placein an area open to traffic.

WARNINGWhile riding, always observe the safety prescriptions described in paragraph 2.1.7. of thismanual.

- 83 -

ADJUSTMENTS 5

5

5.1. List of adjustments

There are many adjustments that can significantlyimprove the ergonomics, geometry and safety of themotorcycle.Some of these can only be performed by skilled per-sonnel at authorized service centres.

WARNINGTo avoid losing control of the vehicle whileriding, be sure to always keep both handson the handlebars. All adjustments must beperformed when the vehicle is stationary.

- 84 -

ADJUSTMENTS 5

5

(G) Steering damper adjustment(§ 5.6)

(D) Gear lever adjustment (§ 5.2)

(L) Rear suspension adjustment(§ 5.8)

(M) Drive chainadjustment (§ 5.2)

(C) Left-hand footrestadjustment (§ 5.2)

(N) Headlightadjustment (§ 5.2)

(H) Front suspensionadjustment (§ 5.7)

(F) Rearview mirror adjustment (§ 5.5)

(A) Clutch lever adjustment (§ 5.4)

(F) Rearview mirror adjustment (§ 5.5)

(C) Right-hand footrest adjustment (§5.2.)

(E) Rear brake lever adjust-ment (§ 5.2)

(B) Front brake lever adjust-ment (§ 5.3)

- 85 -

ADJUSTMENTS 5

5

5.2. Table of adjustments

H - Front suspension adjustment: The follow-ing can be adjusted to adapt the response of thesuspension to the rider’s preference:

- spring preload (§ 5.7.1)- rebound damper (§ 5.7.2)- compression damper (§ 5.7.3)

L - Rear suspension adjustment: The followingcan be adjusted to adapt the response of the sus-pension to the rider’s preference:

- spring preload- geometry height

- rebound damper (§ 5.8.1)- high speed compression damper (§ 5.8.2)- low speed compression damper (§ 5.8.3)

M - Drive chain adjustment: To ensure safe andeffective transmission of power.

N - Headlight adjustment: To adjust the range ofthe light beam to the geometry of the motorcycle.

A - Clutch lever adjustment: Optimizes the gripto suit the rider’s needs (§ 5.4).

B - Front brake lever adjustment: Optimizesthe grip to suit the rider’s needs (§ 5.3).

C - LH and RH footrest adjustment: Optimizes theposition of the footrests to suit the rider’s needs.

D - Gear lever adjustment: Optimizes the posi-tion of the lever to suit the rider’s needs.

E - Rear brake lever adjustment: Optimizes theposition of the lever to suit the rider’s needs.

F - Rearview mirror adjustment: Optimizes theorientation of the rearview mirrors (§ 5.5).

G - Steering damper adjustment: Adjusts thesteering stiffness to the rider’s preference (§ 5.6).

- 86 -

ADJUSTMENTS 5

5

5.3. Adjusting the front brake lever

WARNINGNever perform the adjustment whileriding.

While pulling the lever to counter the action of thespring, turn the ring clockwise or counterclockwi-se to move the lever away or towards the hand-grip respectively.

5.4. Adjusting the clutch lever

WARNINGNever perform the adjustment whileriding.

While pulling the lever to counter the action of thespring, turn the ring clockwise or counterclockwi-se to move the lever away or towards the hand-grip respectively.

- 87 -

ADJUSTMENTS 5

5

5.5. Adjusting the rearview mirrors

WARNINGNever perform the adjustment while riding.

Press the mirror at the points shown in the figure toadjust its position in the four directions.

5.6. Adjusting the steering damper

WARNINGNever perform the adjustment while riding.

The standard adjustment is obtained by fully rotating theknob counterclockwise. In this position the damperoffers the least resistance to the rotation of the steering.To suit the rider’s needs, the action of the damper canbe gradually increased by rotating the knob clockwise.

Adjusting knob

- 88 -

ADJUSTMENTS 5

5

5.7. Adjusting the front suspension

WARNINGIt is essential that the adjusters ofboth fork rods are adjusted to thesame position.

Springpreload

Rebounddamping

Compressiondamping

Soft

3 turns

14 clicks

12 clicks

Standard

5 turns

10 clicks

8 clicks

Stiff

7 turns

7 clicks

5 clicks

Type of geometry

Rebound damper

Spring preload

Compression damper

- 89 -

ADJUSTMENTS 5

5

5.7.1. Spring preload

The adjustment is obtained from the standardposition, which is found by fully turning the adju-sting nut counterclockwise and then clockwise(see table). Rotate clockwise to increase thespring preload or counterclockwise to decrease it.

5.7.2. Rebound damper (front suspension)

The adjustment is obtained from the standardposition, which is found by fully turning the screwclockwise and then counterclockwise (see table).Rotate clockwise to increase the damping actionor counterclockwise to decrease it.

- 90 -

ADJUSTMENTS 5

5

5.7.3. Compression damper (front suspension)

The adjustment is obtained from the standard position,which is found by fully turning the screw clockwise andthen counterclockwise (see table). Rotate clockwise toincrease the damping action or counterclockwise todecrease it.

5.8. Adjusting the rear suspension

CAUTION

When you estimatethe rear suspen-sion settings, neverpush or pull in anyway on the exhaustmufflers. Theywould be certainlydamaged.

NO NO

- 91 -

ADJUSTMENTS 5

5

WARNING: The high temperature of theexhaust pipes can cause burns. Beforeadjusting the rear suspension, shut offthe engine and wait until the exhaustpipes have thoroughly cooled.

WARNING: The rear shock absorber con-tains highly compressed gas. Do not tryto open or disassemble it in any way.

NOTE: At the moment of delivery of themotorcycle, the rear suspension is adju-sted in the standard configuration (seeenclosed table).

Rebound damper

High speed compression damper

Low speed compression damper

Rebound damper(§5.8.1.)

High speed compres-sion damper (§5.8.2.)

Low speed compres-sion damper (§5.8.3.)

Soft

24 clicks

0 clicks

18 clicks

Standard

20 clicks

0 clicks

15 clicks

Stiff

16 clicks

up to6 clicks

12 clicks

Type of geometry

- 92 -

ADJUSTMENTS 5

5

5.8.1. Rebound damper (rear suspension)

The adjustment is obtained from the standard position, which isfound by fully rotating the ring clockwise and then counter-clokwise (see table). Rotate clockwise to increase the dampingaction or counterclockwise to decrease it.

5.8.2. High speed compression damper (rear suspension)

The adjustment is obtained from the standard position, which isfound by fully rotating the screw counterclockwise and thenclockwise (see table). Rotate clockwise to increase the dampingaction or counterclockwise to decrease it.

5.8.3. Low speed compression damper (rear suspension)

The adjustment is obtained from the standard position, which isfound by fully rotating the screw clockwise and then counter-clockwise (see table). Rotate clockwise to increase the dampingaction or counterclockwise to decrease it.

- 93 -

ADJUSTMENTS 5

5

5.9. Headlight adjustmentPlace the vehicle at a distance of 10 m from a vertical wall.Make sure that the motorcycle is placed on an even horizontal surface, and that the headlight’s opticalaxis is perpendicular to the wall.The vehicle must be held in an upright position. Measure the “X” distance between the headlight centerand the ground surface, then trace a small cross on the wall at the same height.When you turn the headlight on, the upper boundary line between the dark area and the lighted areamust be at an height equal or lower than the 9/10 of the headlight center height (X).For the adjustment of the headlight, the possible adjustment range is : ±4°.

Headlight center

- 94 -

MAINTENANCE 6

6

6.1. Tables of scheduled maintenance and checks

The main periodic checks and maintenance operations areshown in the following tables. These operations are necessaryto keep the motorcycle safe and in perfect running order.

The intervals indicated in the periodic maintenance and lubri-cation tables must be intended as a general guide under nor-mal riding conditions. It could be necessary to reduce theseintervals according to the climate, the ground conditions, thegeographic position and the conditions of use.

Some of the operations can be carried out by the user, provi-ding he or she possesses the requisite skills. If unskilled, havethe operations performed by an authorized service centre.

As a rule maintenance operations must be performed whilethe motorcycle is on the rear stand after switching off the engi-ne and setting the start switch to OFF. On the contrary, whilechecking the fluid levels it is advisable to keep the motorcyclein an upright position without using the rear stand.

After the first 36,000 km (22,400 mi) the operations must beperformed at the same intervals shown in the tables.

- 95 -

MAINTENANCE 6

6

WARNING• Impropriety or lack of recommended manitenance operations can lead to an increase ofthe risk of accidents and damage to the motorcycle.• Always use genuine MV Agusta spare parts. Using non-genuine spare parts can accelera-te the wear of your motorcycle and shorten its life.• Failure to perform the recommended operations, as well as using non-genuine spareparts, makes the warranty null and void.

WARNINGIf yor motorcycle is involved in an accident, have all its main parts controlled by an autho-rized MV Agusta dealer. If necessary, you can make some provisional repairs by yourself.

WARNINGTo replace or top up the lubricants and fluids of your motorcycle, use only the productsgiven at paragraph 6.3.

Respect and defend natural environmentEverything we do affects the whole planet as well as its resources.MV Agusta, in order to protect the interests of the community, awakens the Customers and the Technical Assistance opera-tors to use the vehicle and dispose of its replaced parts respecting the laws in force concerning environmental pollution andwaste disposal and recycling.

- 96 -

MAINTENANCE 6

6

Tables of scheduled maintenance

0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery

DESCRIPTION OPERATION

km (mi) covered

Service coupon A B C D E F G

Check level Every time vehicle is used

Engine oilRenew

● ● ● ● ● ● ●

At least once a year

Engine oil filter● ● ● ● ● ● ●

Every time engine oil is changed

Check / Restore level Every time vehicle is used

Coolant Check / Restore level ● ● ● ● ● ● ● ●

Renew At least every two years

Cooling system Check for leakage ● ● ● ● ● ● ● ●

Electric fans Check operation ● ● ● ● ● ● ● ●

Valves Check / Adjust ● ● ● ●

Timing chainCheck ● ● ●

Replace ●

Replace( Use only MV Agustagenuine spare parts )

- 97 -

MAINTENANCE 6

6


0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


km (mi) covered


Timing movable shoe

Check / Replace ● ● ●

Replace●

Every time timing chain is replaced

Timing chain stretcher Check / Replace ● ● ●

Spark plugsCheck / Replace ● ● ● ●

Replace ● ● ●

Fuel filter Check / Replace ● ● ●

Throttle body Check and Adjust ● ● ● ● ● ● ●

Air filter Check / Replace ● ● ● ● ● ●

Check level Every time vehicle is used

Brakes / Clutch fluidCheck level ● ● ● ● ● ● ●

Renew●

At least every two years

- 98 -

MAINTENANCE 6

6


0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


Check operation Every time vehicle is used

Brakes / Clutch Check operation ● ● ● ● ● ● ● ●

Check lines for leakage ● ● ● ● ● ● ● ●

Brake pads Check wear Every 1000 Km (600 mi)

( front and rear ) Check / Replace ● ● ● ● ● ● ●

Fuel lines and connectionsCheck for leakage ● ● ● ● ● ● ●

Replace At least every 3 years


Throttle control Check operation ● ● ● ● ● ● ● ●

Check / Adjust play ● ● ● ● ● ● ● ●

Choke control Check operation ● ● ● ● ● ● ● ●

Flexible controls

and transmissionsCheck / Adjust ● ● ● ● ● ● ● ●

km (mi) covered


- 99 -

MAINTENANCE 6

6


0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


Check Every 1000 Km (600 mi)

Lubricate Every 1000 Km (600 mi) and after riding under the rainDrive chain

Check / Adjust ● ● ● ● ● ● ● ●

Lubricate ●

Replace ● ● ● ● ● ●

Check ●

Front sprocket / Tab washerReplace

● ● ● ● ● ●

Every time drive chain is replaced

Check ●

Rear sprocketReplace

● ● ● ● ● ●

Every time drive chain is replaced

Rear sprocket spring drive Check ● ● ● ● ● ●

Steering head tube ring Check / Adjust ● ● ● ●

km (mi) covered


- 100 -

MAINTENANCE 6

6


0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


Steering bearingsCheck / Adjust ● ● ● ●

Lubricate ●

Check pressure Every time vehicle is used; at least every 10 days

TyresCheck wear Every time vehicle is used; at least every 500 Km (300 mi)

Check pressure ● ● ● ● ● ● ● ●

Check wear ● ● ● ● ● ● ●

Wheel rims Inspect visually● ● ● ● ● ● ●

Every time tyre is replaced

Check● ● ● ● ●

Front wheel bearingsEvery time tyre is replaced

Replace ●

SidestandCheck operation Every time vehicle is used

Check operation ● ● ● ● ● ● ● ●

km (mi) covered


- 101 -

MAINTENANCE 6

6

0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


Side stand switchCheck operation Every time vehicle is used


Rear wheel hubCheck / ● ●

Replace / ●

Swingarm bearings Check / Lubricate ●

Drive chain pads on swingarm Check / Replace ● ● ● ● ● ● ●

Drive chain pads on frame plate Check / Replace ● ● ● ● ● ● ●

Rear shock absorber Check / Adjust ● ● ● ●

Front fork oil Renew ●

Battery connections Check and clean ● ● ● ● ● ● ●

Electrical equipment Check operation ● ● ● ● ● ● ● ●

Instrument panelCheck operation Every time vehicle is used


km (mi) covered



Lubricateneedle bearing

Lubricateneedle bearing

- 102 -

MAINTENANCE 6

6

0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


Lights / Visual signalsCheck operation Every time vehicle is used


HornCheck operation Every time vehicle is used



Headlight Check operation ● ● ● ● ● ● ● ●

Adjust Every time geometry is changed

Ignition switchCheck operation Every time vehicle is used


LocksCheck operation Every time vehicle is used


Screws and nuts Check / Tighten ● ● ● ● ● ● ● ●

Hose clamps Check / Tighten ● ● ● ● ● ● ● ●

km (mi) covered



- 103 -

MAINTENANCE 6

6

0 1000 6000 12000 18000 24000 30000 36000(600) (3800) (7500) (11200) (14900) (18600) (22400)

Pre-delivery


General lubrication ● ● ● ● ● ● ● ●

General test ● ● ● ● ● ● ● ●

km (mi) covered


In order to highlight symbols importance, remember the following information (already provided at § 1.2 of this manual):

Information on operations that can be carried out by the user.

Information on operations that must be performed only by your authorized MV Agusta dealer.

The “ ” symbol points out the requirement to use a tool or a special equipment in order to correctlyperform the described operation.

§ The “ § ” symbol refers the reader to the chapter identified by the number that follows.


- 104 -

MAINTENANCE 6

6

6.2. Tools and accessories supplied

A bag in the glove compartment contains the followingtools:- 1 hexagonal bar (10 mm hexagon);- 6 Allen keys (2,5 - 3 - 4 - 5 - 6 - 8 mm hexagons);- 1 spanner for rear wheel eccentric with extension;- 2 fuses (7.5 A and 15 A).

The following accessories are also supplied:- 1 rear stand;- 1 rear sprocket for drive chain (number of teeth

Z=37);- 1 rear sprocket for drive chain (number of teeth

Z=39);- 1 spark plug wrench (16 mm hexagon);- 1 motorcycle canvas cover;- 2 handgrip covers;- 1 document holder.

WARNINGThe rear sprockets with Z=37 andZ=39 have been expressly desi-gned for a specially competitiveuse of the vehicle. Their use isstrictly limited to areas closed totraffic. Failure to observe thisrestriction constitutes a breach ofthe Highway Code, for which MVAgusta cannot be held responsible.

- 105 -

MAINTENANCE 6

6

Description Recommended product SpecificationsEngine lubrication oil AGIP RACING 4T 10W/60 (*) SAE 10W/60 - API SJ

Ethylene glycol dilutedCoolant AGIP ECO - PERMANENT with 40 percent

distilled waterBrake and clutch fluid AGIP BRAKE FLUID DOT4 DOT4Drive chain lubrication oil AGIP CHAIN AND DRIVE SPRAY –

6.3. Table of lubricants and fluids

* : MV Agusta suggests to refer directly to its authorized dealers in order to purchase the recommendedproduct. The AGIP Racing 4T 10W/60 engine oil has been expressly produced for the F4 motorcycleengine. If the above described lubricant is not available, MV Agustasuggests to use a fully synthetic engine oil having characteristicsequal or better than the ones prescribed in the following standards:

– Consistent with: API SJ– Consistent with: ACEA A3– Consistent with: JASO MA– SAE Rating: SAE 20 W-50 or 10 W-60

NOTEThe above standard denominations must be written, alone ortogether, on the engine oil container label.

Engine oilSAE 10 W-60

API SJACEA A3JASO MA

- 106 -

MAINTENANCE 6

6

use and maintenance manual - mv agusta club schweiz · 3.1 location of controls and instruments 38...

Documents