tool storage - herramientas

7/28/2019 Tool Storage - Herramientas

1/18

ToolStorage

TOOLSTORAGE

G


2/18

TOOLS

TORAGE

TOOL STORAGE Heavy Duty Braces: Continuous piano hinge and lid braces

increase the strength of the lid, and provide easy opening and

closing action.

Full Length Drawer Pulls: Easy one-handed operation when

opening or closing drawers.

Reinforced Steel Channels: Heavy duty reinforced steel

channels support heavy weight load capacities.

Ball Bearing Drawer Slides: One piece heavy duty ball

bearing drawer slides offer full drawer extension for total drawer

access and smooth operation of fully loaded drawers.

Chrome Plated End Handle: Chrome plated end handle

mounts on either end of the roller cabinet to allow

maximum control when moving.

Double Wall Construction: Offers maximum chassis

strength and assures smooth, easy operation and alignment

of fully loaded drawers.

High Performance Casters: Allow smooth and reliable

mobility. Swivel casters have locking system.


3/18

TOOL

STORAGE

FEATURES

27

CONSTRUCTION Double wall construction provides structural strength

and assures smooth, easy operation and alignment of

fully loaded drawers.

Lids remain securely open until chest storage is in the closed

locked position. Heavy gauge, continuous piano hinge equipped with rust-

resistant stainless steel pin prevents punch-out and lid

removal while still allowing easy opening and closing action.

Locking lid stay provides support in open position, preventing

the lid from falling when locked in position on standard units.

Heavy duty gas struts featured on some models for assistance

and safety.

DRAWERS Heavy gauge steel is used in a two-piece construction which

adds load carrying strength and resists sagging. Built-in rear

stiffener strengthens drawer.

All drawers open to 100% full extension providing complete

front-to-back access of the drawer and its contents.

Full width drawer pulls provide simple, one-handed operation

when opening or closing drawers.

Commercial series utilizes ball-bearing slides with quick

disconnects featured on all drawers allowing additional

strength and carrying capacity for easy drawer movement.

Utility duty series utilizes welded slides to the drawer sides

and operates on the two-piece, I-beam drawer slides with

beveled channel edges providing smooth drawer movement.

This I-beam slide is stronger than a one-piece slide, which may

split under heavy loads.

EXTERIOR OF DRAWERS Pre-painted toolboxes are coated with iron phosphate that

provides better paint adhesion and corrosion protection.

Durable, baked-on polyester powder coat paint provides a top

quality fade-resistant finish.

CASTERS Swivel and rigid casters provide easy rolling mobility and

resistance to damaging effects of oil and solvents.

Swivel casters contain side-lock brakes.

Heavy duty large 6"x 2" casters are made of high

thermoplastic rubber. Roller bearings provide easy rolling

mobility and are resistant to gas, oil, and solvents.


4/18

TOOLSTORAGE

28

53" Professional Series Tool CabinetsDesigned for industrial useProduct Code Description

W53TC8 53" Wide x 20" Deep 8-Drawer Top ChestW53RC13 53" Wide x 20 Deep 13-Drawer Roll Cabinet

W53TC8 Top Chest Overall DimensionsCapacity(cu. in.) Width (inc hes) Depth (inches) Height (inc hes)

12970 53 1332 19 1316 19 716

Top Chest Drawer SizesNumber Width (inches) Depth (inches) Height (inches)

Top Compartment 52 516 18 732 4 23322 11 732 17 12 1 582 11 732 17 12 3 582 34 2332 17 12 1 582 34 2332 17 12 3 58

W53RC13 Roll Cabinet Overall DimensionsCapacity(cu. in.) Width (inc hes) Depth (inches) Height (inches)

20340 53 1332 19 1316 38 18

Roll Cabinet Drawer SizesNumber Width Depth Height

2 11 732 17 12 1 23323 11 732 17 12 3 23321 11 732 17 12 11 23322 34 2332 17 12 1 584 34 2332 17 12 3 581 34 2332 17 12 7 58

FeaturesMade of High-Quality Class I steel to enhance strength a nd finish.Double wall construction provides strength.

Reinforcement corner gussets add strength and reduce racking.

2" mounting centers provide flexibility in arranging drawers toindividual needs

Drawers equipped with positive latching drawer retention to prevent

unwanted drawer opening.All dra wers equippe d with 75 poun d full ex tensio n ball b earing slides with

quick disconnect.All 4" a nd dee per dra wers p rovide for add ing addi tional slides to doub le

drawer capacity.

Rolled hem on all draw ers provide superior strength, rigidity and s afety.Casters absorb vibrations transmitted to frame w hile moving on

uneven surfaces.

Casters equipped with pedal brake and ball bearings for easy operation.High luster paint protects against scratches, pealing, blistering

and corrosion.

Paint pretreatment process both sprays and immerses boxes for addedcorrosion protected.

Drawer liners included at no extra charge.

Gas struts in lid of chest make lid easy to open and close.Two point locking design adds e xtra securit y on all chests.

W53RC13

W53TC8


5/18

TOOL

STORAGE

53"

PROFESSIONAL

SERIES

29

Designed for industrial use

Product Code Description

W53RC6BS 53" Wide x 20" Deep 6-Drawer Roll Cabinet

with Bulk Storage

W53RC6BS Roll Cabinet Overall DimensionsCapacity(cu. in .) Wid th ( inches) Depth (i nches) Height ( inches)

23972 53 1332 19 1316 38 18

Roll Cabinet Drawer SizesNumber Wid th ( inches) Depth (i nches) Height ( inches)

5 34 1332 17 12 3 581 34 2332 17 12 7 58Bulk Section 16 19 29

FeaturesWide drawers to hold long tools such as pry bars and extensions.Bulk section with adjustable shelf perfect for storing large, bulky tools.

Made of High-Quality Class I steel to enhance strength a nd finish.

Double wall construction provides strength.

Reinforcement corner gussets add strength and reduce racking.2" mounting centers provide flexibility in arranging drawers to

individual needs.Drawers equipped with positive latching drawer retention to prevent

unwanted drawer opening.All dra wers equippe d with 75 poun d full ex tensio n ball b earing slides

with quick disconnect.

All 4" a nd dee per dra wers p rovide for add ing addi tional slides to doub ledrawer capacity.

Rolled hem on all draw ers provide superior strength, rigidity and s afety.

Casters absorb vibrations transmitted to frame w hile moving onuneven surfaces.

Casters equipped with pedal brake and ball bearings for easy operation.

High luster paint protects against scratches, pealing, blisteringand corrosion.

Paint pretreatment process both sprays and immerses boxes for added

corrosion protected.Drawer liners included at no extra charge.

W53RC6BS

Bulk Storage Area

53" Professional Series Tool Cabinet


6/18

TOOLSTORAGE

30

40" Professional Series Tool CabinetsDesigned for industrial useProduct Code Description

W40TC4 40" Wide x 20" Deep 4-Drawer Top ChestW40RC7 40" Wide x 20" Deep 7-Drawer Roll Cabinet

W40TC4 Top Chest Overall DimensionsCapacity(c u. in.) Width (inches) Depth (inches) Height (inches)

9746 40 132 19 1316 19 716

Top Chest Drawer SizesNumber Width Depth Height

Top Compartment 39 2932 18 2332 4 23322 34 1116 17 1732 1 13322 34 1116 17 1732 3 1932

W40RC7 Roll Cabinet Overall DimensionsCapacity(c u. in.) Width (inches) Depth (inches) Height (inches)

15253 40 19 1316 37 78

Roll Cabinet Drawer Sizes

Number Width Depth Height2 34 1116 17 1732 1 13324 34 1116 17 1732 3 19321 34 1116 17 1732 7 2132

FeaturesMade of High-Quality Class I steel to enhance strength and finish.

Double wall construction provides strength.Reinforcement corner gussets add strength and reduce racking.

2" mounting centers provide flexibility in arranging drawers to

individual needs.Drawers equipped with positive latching drawer retention to prevent

unwanted drawer opening.

All draw ers eq uipped w ith 75 pound fu ll exten sion ba ll bear ing slid es wi thquick disconnect.

All 4" a nd deep er draw ers pro vide fo r adding additi onal sl ides to double

drawer capacity.Rolled hem on all drawers provide superior strength, rigidity and safety.

Casters absorb vibrations transmitted to frame while mov ing on

uneven surfaces.Casters equipped with pedal brake and ball bearings for easy operation.

High luster paint protects against scratches, pealing, blisteringand corrosion.

Paint pretreatment process both sprays and immerses boxes for added

corrosion protected.Drawer liners included at no extra charge.

Gas struts in lid of chest make lid easy to open and close.

Two point locking design adds ex tra se curity on all c hests .

W40RC7

W40TC4


7/18

TOOL

STORAGE

40" & 26"

PROFESSIONAL

SERIES

31

W26RC7

W26TC4

26" Professional Series Tool CabinetDesigned for industrial useProduct Code Description

W26TC4 26" Wide x 20" Deep 4-Drawer Top Chest

W26RC7 26" Wide x 20" Deep 7-Drawer Roll Cabinet

W26TC4 Top Chest Overall DimensionsCapacity (cu. in.) Width (inches) Depth (inches) Height (inches)

6180 26 2332 19 1316 19 1332

W26TC4 Roll Cabinet Overall DimensionsCapacity(cu. in .) Wid th ( inches) Depth (i nches) Height ( inches)

9374 26 19 1316 37 78


Top Compartment 26 1932 18 2332 4 23322 21 38 17 1732 1 13322 21 38 17 1732 3 1932


Number Wid th ( inches) Depth (i nches) Height ( inches)2 21 38 17 1132 1 15324 21 38 17 1132 3 19321 21 38 17 1132 7 2132

FeaturesMade of High-Quality Class I steel to enhance strength a nd finish.Double wall construction provides strength.

Reinforcement corner gussets add strength and reduce racking.

2" mounting centers provide flexibility in arranging drawers toindividual needs.

Drawers equipped with positive latching drawer retention to prevent

unwanted drawer opening.All dra wers equippe d with 75 poun d full ex tensio n ball b earing slides with

quick disconnect.

All 4" a nd dee per dra wers p rovide for add ing addi tional slides to doub ledrawer capacity.

Rolled hem on all draw ers provide superior strength, rigidity and s afety.Casters absorb vibrations transmitted to frame w hile moving onuneven surfaces.

Casters equipped with pedal brake and ball bearings for easy operation.

High luster paint protects against scratches, pealing, blistering andcorrosion.

Paint pretreatment process both sprays and immerses boxes for addedcorrosion protected.


Two point locking design adds e xtra securit y on all chests.


8/18

TOOLSTORAGE

32

Heavy-Industrial Series 42" Tool CabinetsExtra heavy duty industrial-grade tool cabinets with ballbearing drawer slides for rugged service in the toughestwork environmentsProduct Code Description

50860 42" Wide x 24 " Deep Indus tr ia l 4 -Drawer Top Chest50890 42" Wide x 24 " Deep Indus tr ia l 5 -Drawer Ro ll Cabinet

50860 Top Chest Overall DimensionsCapacity(cu. in.)

Width(inches)

Depth(inches)

Height(inches)

13798 41 12 24 12 22 34

Top Chest Drawer Sizes

NumberWidth

(inches)Depth

(inches)Height

(inches)

2 38 22 21 38 22 4 141 38 22 6 716

50890 Roll Cabinet Overall DimensionsCapacity(cu. in.)

Width(inches)

Depth(inches)

Height(inches)

21051 41 12 24 12 42 18


NumberWidth

(inches)Depth

(inches)Height

(inches)

3 38 22 4 141 38 22 6 7161 38 22 8 12

FeaturesFrame is reinforced using 14 gauge plates on the front of cabinet.Rigidity of frame is significantly increased with full height & width triple channel wall.

Three l ayers of meta l guard the co rners w ith interlock corner design .TWO p airs of 120 lb. r ated ba ll bear ing dra wer sl ides on all dra wers except2" drawers.

6"x2" precision ball bearing casters m ade of high tech thermoplastic rubber.

Casters absorb vibrations transmitted to frame while mov ing on uneven surfaces.Casters equipped with pedal brake and ball bearings for easy operation.

All draw ers eq uipped w ith safe -lock syste m & m ade of 1 8 gauge heavy duty s teel.Extruded aluminum drawer handle trim.

Red high gloss powder coat paint is scratch resistant.

Drawer liners included at no extra charge.Gas struts in lid of chest make lid easy to open and close.

50890

50860


9/18

TOOL

STORAGE

HEAVY INDUSTRIAL

& COMMERCIAL

SERIES TOP CHESTS& ROLL CABINETS

33

Do not open more than one loaded drawer at a time. Close lid and lock drawers and doors before moving. Apply brakes on locking casters when not moving unit. Do not step in or on drawers. Secure units together with fasteners.

WARNING

Read and follow instruction manual. Do not pull; push to move. Wear gloves when lifting by edges. Keep feet and fingers clear of edges when stacking,

hanging or moving units.

Commercial Series 53" Tool Cabinets

Designed for use in commercial applications.Equipped with quadra level ball bearing drawer slides.Product Code Description

50861 53" 9-Drawer Heavy DutyRo ll er Bear ing Top Chest50891 53" 14 -Drawer Heavy Duty Ro ll erBear ing Rol l Cab inet

Color Options: Standard color is red. To order in an optional color, simply add the appropriatecolor code to the end of the product code. Example: To order #50861 in Blue, specify product

code 50861BL


Width(inches)

Depth(inches)

Height(inches)

13542 52 1732 17 78 22 14


NumberWidth

(inches)Depth

(inches)Height

(inches)

5 23 16 23 23 16 4 141 23 16 6 716


Width(inches)

Depth(inches)

Height(inches)

21000 53 1732 18 34 42 38


NumberWidth

(inches)Depth

(inches)Height

(inches)

4 23 16 27 23 16 4 142 23 16 67161 23 16 8 12

Features

Frame is reinforced for rigidity using 14 gauge channel on bottom.High gloss powder coat paint is scratch & chemical resistant.

Stronghold drawer detents help keep drawers shut.Heavy gauge metal for a lifetime of use.

Double wall construction for greater strength and durability.

Heavy duty 5" x 2" casters on c abinets.Drawer liners included at no extra charge.

Gas struts in lid for easy and safe opening.

Ball bearing drawer slides for smooth drawer operation.

Color Options

Red: StandardBlack: BBlue: BL

Yellow: Y

50891

50861


10/18

TOOLSTORAGE

34

Commercial Series 42" Tool CabinetsDesigned for commercial applications. Equipped withquadra level ball bearing drawer slides.Product Code Descrip tion

50865 42" 7 -Drawer Heavy Duty Ro ll er Bearing Top Chest

50895 42" 15-Drawer Heavy Duty Rol le r Bearing Rol l Cab inet50855 37" 1-Shelf Heavy Duty Tall Side Ca binet

Color Options: Standard color is red. To order in an optional color, simply add the appropriatecolor code to the end of the product code. Example: To order #50865 in Blue, specify product

code 50865BL


Width(inches)

Depth(inches)

Height(inches)

9205 40 12 17 78 20 12


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 38 16 4 142 23 16 22 11 16 21 23 16 4 14

1 11 16 41

4


Width(inches)

Depth(inches)

Height(inches)

14623 41 12 18 34 42 38


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 38 16 4 144 23 16 22 23 16 4 141 23 16 6 7164 11 16 22 11 16 4 141 11 16 6 716

FeaturesFrame is reinforced for rigidity using 14 gauge channel on bottom.

High gloss powder coat paint is scratch & chem ical resistant.Stronghold drawer detents help keep drawers shut.

Heavy gauge metal for a lifetime of use.

Double wall construction for greater strength and durability.Heavy duty 5" x 2" casters on cabinets.

Gas struts in lid for easy and safe opening.Ball bearing drawer slides for smooth drawer operation.


50855 Side Cabinet Overall DimensionsCapacity(cu. in.)

Width(inches)

Depth(inches)

Height(inches)

8200 15 18 34 37 116

FeaturesHigh gloss powder coat paint is scratch & chem ical resistant.Heavy gauge metal for a lifetime of use.

Adjusta ble she lf for ve rsatil e tool s torage options .

Can be used on all Williams Commercial Series roll cabinets.

Color Options

Red: Standard

Black: B

Blue: BL

Yellow: Y

Orange: O

50865

50855

50865BL50895BL50855BL

50865B50895B50855B

50865O50895O50855O

50865Y50895Y50855Y

50895


11/18

TOOL

STORAGE

COMMERCIAL

SERIES TOOL

CHESTS &

ROLL CABINETS

35


Product Code Description

50867 34" 10-Drawer Heavy Duty Roller Bearing Top Chest50897 34" 8-Drawer Heavy Duty Rol ler Bearing Rol l Cabinet


Width(inches)

Depth(inches)

Height(inches)

8845 34 17 78 20 12


6 11 16 21 7 16 6 7162 31 16 21 31 16 4 14


Width(inches)

Depth(inches)

Height(inches)

14292 35 18 34 42 38


NumberWidth

(inches)Depth

(inches)Height

(inches)

4 31 16 23 31 16 4 141 31 16 8 12

FeaturesRoll cab frames are reinforced for rigidity using 14 gauge channel on bottom.

High gloss powder coat paint is scratch & chemical resistant.Stronghold drawer detents help keep drawers shut.

Heavy gauge metal for a lifetime of use.Double wall construction for greater strength and durability.Heavy duty 5" x 2" casters on c abinets.

Wide drawers are ideal for storing torque wrenches, prybars, etc.Drawer liners included at no extra charge.



WARNING



50896

50867

50897

Commercial Series 42" Tool CabinetsDesigned for commercial applications. Equippedwith quadra level ball bearing drawer slides. Fullwidth drawers.Product Code Description

50896 42" 6-Drawer Heavy Duty Rol ler Bearing Rol l Cabinet


Width(inches)

Depth(inches)

Height(inches)

17242 41 12 18 34 42 38


NumberWidth

(inches)Depth

(inches)Height

(inches)

2 38 16 6 7164 38 16 4 14


12/18

TOOLSTORAGE

36


WARNING




Designed for commercial applications. Equippedwith quadra level ball bearing drawer slides.Product Code Description

50871 27" 10-Drawer Heavy Duty Rol ler Bearing Top Chest50901 27" 8-Drawer Heavy Duty Roller Bearing Rol l Cabinet


Width(inches)

Depth(inches)

Height(inches)

6571 26 17 78 20 12


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 23 16 4 142 23 16 26 7 16 21 7 16 6 716


Width(inches)

Depth(inches)

Height(inches)

10560 27 18 34 42 38


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 23 16 8 123 23 16 4 144 23 16 2

FeaturesFrame is reinforced for rigidity using 14 gauge channel on bottom.

High gloss powder coat paint is scratch & chem ical resistant.

Stronghold drawer detents help keep drawers shut.

Heavy gauge metal for a lifetime of use.Double wall construction for greater strength and durability.

Heavy duty 5" x 2" casters on cabinets.Drawer liners included at no extra charge.


50871

50901


13/18

TOOL

STORAGE

COMMERCIAL &UTILITY SERIES

TOP CHESTS &ROLL CABINETS

37

Utility Series 26" Tool CabinetsUtility duty units, equipped with I-Beam frictiondrawer slides for everyday commercial use.

Product Code Descrip tion50805 26" 12-Drawer Top Chest50837 27" 5-Drawer Roll Cabinet


Width(inches)

Depth(inches)

Height(inches)

6507 26 17 78 20 12


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 23 16 4 142 23 16 29 7 16 2


Width(inches)

Depth(inches)

Height(inches)

13364 27 1834 42 38


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 23 16 24 23 16 4 14

FeaturesHeavy bottom support rails.

High gloss powder coat paint is scratch & chemical resistant.

Heavy gauge metal for a lifetime of use.Double wall construction for greater strength.

Heavy duty 5" x 2" casters on 42" c abinet & 5" x 1-1/4" on 26" cabinets.

Full width drawer on 42" cabinet has ball bearing slides for smoothdrawer operation.

Standard compound friction slides.

Utility Series 42" Tool CabinetsUtility duty units, equipped with I-Beam frictiondrawer slides for everyday commercial use.Product Code Description

50801 42" 9-Drawer Top Chest50831 42" 15-Drawer Roll Cabinet

Color Options: Standard color is red. To order in an optional color, simply add the appropriate color

code to the end of the product code. Example: To order #50801 in Blue, specify product code 50801BL


Width(inches)

Depth(inches)

Height(inches)

9205 40 12 17 78 20 12


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 38 16 4 144 11 16 24 23 16 2


Width(inches)

Depth(inches)

Height(inches)

14623 41 12 18 34 42 38

Roll Cabinet Drawer SizesNumber

Width(inches)

Depth(inches)

Height(inches)

1 38 16 4 144 23 16 22 23 16 4 141 23 16 6 7164 11 16 22 11 16 4 141 11 16 6 716

50801

50831

50805

50837

Color Options

Red: Standard

Black: B

Blue: BL


14/18

TOOLSTORAGE

38

Utility Series 26" Tool CabinetsUtility duty units, equipped with I-Beam frictiondrawer slides for everyday commercial use.Product Code Description

50803 26" 10-Drawer Top Chest50833 27" 5-Drawer Roll Cabinet

Color Options: Standard color is red. To order in an optional color, simply add the appropriate color

code to the end of the product code. Example: To order #50803 in Blue, specify productcode 50803BL


Width(inches)

Depth(inches)

Height(inches)

4000 26 12 18 78


NumberWidth

(inches)Depth

(inches)Height

(inches)

1 23 10 12 2122 23 10 12 26 7 10 12 21 7 10 12 6 716

50833 Roll Cabinet Overall DimensionsCapacity

(cu. in.)

Width

(inches)

Depth

(inches)

Height

(inches)8228 27 18 34 35 58


NumberWidth

(inches)Depth

(inches)Height

(inches)

4 23 16 4 141 23 16 6 716

Utility Series 26" Tool CabinetsProduct Code Description

50807 26" 6-Drawer Top ChestTB-6024RA 26" 6-Drawer Top Chest with Drop Front50835 27" 3-Drawer Roll Cabinet

TB-6024RA & 50807 Top Chests, Overall DimensionsCapacity(cu. in.)

Width(inches)

Depth(inches)

Height(inches)

3.073 26 12 14 12

Top Chests, Drawer Sizes

NumberWidth

(inches)Depth

(inches)Height

(inches)

3 23 10 12 23 7 10 12 2


Width(inches)

Depth(inches)

Height(inches)

10472 27 18 34 35 58


Number Width(inches) Depth(inches) Height(inches)

1 23 16 21 23 16 4 141 23 16 6

FeaturesHeavy bottom support rails.

High gloss powder coat paint is scratch & chem ical resistant.Heavy gauge metal for a lifetime of use.

Double wall construction for greater strength.Heavy duty 5" x 1-1/4" casters on cabinets.

Standard compound friction slides.

TB-602 4A pictured w ith opti onal to te try.

50803

50833

50807

50835

TB-6024RA

Pictured with optional tote tray

Color Options

Red: Standard

Black: B

Blue: BL


15/18

TOOL

STORAGE

UTILITY SERIESTOP CHESTS,

ROLL CABINETS& ADDITIONALSTORAGE

39

Heavy-Duty Road BoxDesigned with extra heavy-duty features for mobileuse in the factory or on the road in service trucks.Available in black only.Product Code Description

50946B 26" 5-Drawer Heavy Duty Road Box / Top Chest

50946B Road Box Overall DimensionsCapacity(cu. in.)

Width(inches)

Depth(inches)

Height(inches)

6749 26 17 78 22

Road Box Drawer Sizes

NumberWidth

(inches)Depth

(inches)Height

(inches)

2 23 16 4 143 23 16 2

FeaturesDrop front panel has neoprene water & dust resistant seal.Shielded hinges for long life in harsh env ironments.

Cushion feet pads attached to bottom for protection.Extra heavy duty metal w ith 75 lb load rating per drawer.

Secure key internal locking system.

3-Drawer Service Cart with LidEasy and convenient access to tools when andwhere you need them.Product Code Description

50721 3-Drawer Service Cart with Lid

50721 Service Cart Overall DimensionsWidth

(inches)Depth

(inches)Height

(inches)

33 58 19 58 35 58

Service Cart Drawer Sizes

NumberWidth

(inches)Depth

(inches)Height

(inches)

2 12 316 17 12 3 1161 25 58 17 12 3 116

FeaturesHigh gloss powder coat paint is scratch & chemical resistant.

Storage drawers for frequently used tools.Heavy duty side handles.

Heavy duty undercarriage to help support bottom tray load.

Lockable lid for security.18 gauge heavy duty steel.

4" x 1" swivel casters.

7-Drawer Side CabinetEasily extend tool storage capacityProduct Code Description

50851 30" 7-Drawer Heavy Duty Side Box

50851 Side Cabinet Overall Dimensions

Capacity(cu. in.) Width(inches) Depth(inches) Height(inches)

3921 15 18 34 30 12

Side Cabinet Drawer Sizes

NumberWidth

(inches)Depth

(inches)Height

(inches)

1 11 16 6 7162 11 16 4 144 11 16 2

FeaturesFits on both 50835 & 50833 27" wide roll cabinets.High gloss powder coat paint is scratch & chemical resistant.

Heavy gauge metal for a lifetime of use.

Double wall construction for greater strength.

Do not open more than one loaded drawer at a time. Close lid and lock drawers and doors before moving.

WARNING

50946B

50721

50851


16/18

TOOLSTORAGE

40

TB-6119A

19" Flat Top Toolbox

Product Code Width(Inches) Depth(Inches) Height(Inches) Cubic InchCapacity

TB-6119A 19 6 6 12 741

Ideal lor general use.

Steel tote tray keeps smaller Items handy.Combination drawbolt and padlock eye provide security.

26" Flat Top Toolbox

Product CodeWidth

(Inches)Depth

(Inches)Height

(Inches)Cubic InchCapacity

TB-6124A 26 8 34 9 1980

Ruggedly constructed hand tool box.Extra long tools up to 25" fit neatly inside.

Three c ompart ment t ray w ith soc ket div ider to keep small t ools be tter

organized and close at hand.Double drawbolts keep the lid tightly closed.

Padlock eye with slotted hasp provides security.

21" Four Tray Cantilever Toolbox

Product CodeWidth

(Inches)Depth

(Inches)Height


TB-6218A 21 14 8 34 12 1971

Four trays cantilever outward when box is open providing access to the

exceptionally deep box.Two of the trays featur e mova ble div iders a nd ano ther ha s a pro tective

cover to prevent small tools or parts from spilling into the box.

Formed feet in the box bottom add to strength and keep the box aw ay fromwet, dirty surfaces.

20" Hip Roof Toolbox

Product CodeWidth

(Inches)Depth

(Inches)Height


TB-6220A 20 7 8 959

Hip roof design for fitting bulky tools.Ideal for tradesman who carries bulky drills or 3/4 inch drive sets.

Extra large tote tray with deeper space betw een handle and tray bottom.Combination drawbolt and padlock eye provide security.

TB-6124A

TB-6218A

TB-6220A


17/18

TOOL

STORAGE

HAND CARRYBOXES,TOTE BAGS

41

Metal Socket Set ToolboxesRugged storage for Williams premium socket sets

Product CodeLength(Inches)

Width(Inches)

Height(Inches)

TB-101 10 7 1 12TB-102 13 9 1 34

TB-103 18 8 2TB-104 25 9 2TB-12 30 14 11 12 4 34TB-35 14 12 5 12 1 34TB-49 30 14 11 12 4 34

FeaturesRuggedly constructed for long life.

Ideal for storing socket sets, other tools, and small parts.

Custom Rugged-Case-System Tool CaseIdeal for Configuring Custom Tool Sets and SampleCases, and for Component StorageProduct Code Description

50650 Custom Rugged-Case-System Tool Case

FeaturesRugged high-density polyethylene (HDPE) cases are st rong and durable yet

light in weight.Case is shock proof at both high and low tem peratures, equipped with

heavy-duty metal latches and hinges.

Two-com ponent handles are ea sy to g rip and comfor table to carr y.Hollow storage area can be used as is or configured with a custom

foam insert.

Rugged Case System

Replacement Tool Boxes

Designed specifically for the Rugged Case SystemTools Sets

Product CodeFits RCS Set

NumberLength(Inches)

Width(Inches)

Height(Inches)

50629 50601 14 12 8 14 3 7850625 50603 11 6 14 2 5850627 50605 14 12 12 12 4 1450630 50607 14 12 12 12 4 1450626 50609 14 12 8 12 450628 50611 14 12 16 78 4 18

FeaturesDurable two component handle makes the case easy to grip and

comfortable to carry.Heavy-duty and easy to handle all-metal latch. Spring-loaded mechanism

completely disengages the lid.

The ne w str ong hing e cons tructio n makes the case m ore dura ble.

Tool Tote Bags

Product CodeLength(Inches)

Width(Inches)

Height(Inches)

JHW TOTE BAG 14 11 22530-R651-F 11 3/4 8 3/4 1/42530-1-R651-F 15 1/2 6 3/4 1/4

FeaturesConstructed from heavy Cordura for maximum durability.

Ideal for storing and toting tools, parts, and supplies.Heavy duty zippers for extra long life.

TB-103

50650

50627

2530-R651-F 2530-1-R651-FJHW TOTE BAG


18/18

TOOLSTORAGE

42

Roll PouchesCustomize Your Own Tool Sets

Product CodeNumber of

PocketsWidth

(Inches)Height

(Inches)

R-1 5 6 7 12R-2 5 8 12R-3 5 11 12 15 12R-4 5 12 12 18 12R-5 5 16 25R-8 15 17 14 10 12R-10 10 19 34 17 14R-11 10 26 12 25R-13 10 34 12 32R-14 14 20 14 9 34R-15 14 15 14 16 34R-20 14 14 12 8R-23 8 23 14 26R-24 4 8 34 11R-27 17 23 14 17 34R-28 26 19 12 27R-29 8 11 12 34R-30 9 14 58 13R-30X 9 14 34 8 12R-31 6 13 14 16R-36 9 9 14 10 12

R-37 15 37 261

2R-38 7 13 16 34R-41 11 24 20R-42 7 12 34 16R-43 7 13 16 12R-47 7 12 34 14 12R-48 3 15 14 9 14R-49 12 25 58 29

Features

Heavy construction for long life.

Ideal for storing a variety of tools such as wrenches, extensions,and ratchets.

R-9

See-Through Roll Pouches withVelcro Fastening

Product CodeNumber of

PocketsWidth

(Inches)Height

(Inches)

23051 3 11 1211991 9 17 12 1411941 7 13 13 14

Features

Extra heavy construction with velcro fastening.

Clear plastic front panels allows full visibility to tools.

Socket Rails and ClipsProduct Code Description Length (Inches)

R-9 Socket Rail 9R-13R Socket Rail 13R-17 Socket Rail 17Product Code Description Drive Size (Inches)

RC-25 Socket Clip 14RC-37 Socket Clip 38RC-50 Socket Clip 12RC-75 Socket Clip 34

Features

Socket clips sold individually.

All rails hold an y size clips.

R-4

23051

tool storage - herramientas

Documents