manual del mantenimiento preventivo de la siu 2013

COBERTURA Y CARACTERISTICAS DE MANTENIMIENTO ACCESO CELULAR DE ESTACIONES DE ENTEL

MANUAL

EQUIPOS DE TRANSMISION: SIU Y TCU

EDITADO POR:

REGIONAL LA PAZ MZ-1 SEPTIEMBRE 2013MANTENIMIENTO PREVENTIVO: SIU (TCU)

1.- CONFIGURAR TARJETA DE RED DE LA PC USADA:

IP:

192.168.1.20 ("20", puede ser cualquier HOST)

Mascara: 255.255.255.0

2.- USAR TELNET O EL PROGRAMA PUTTY:

telnet:

192.168.1.1 username: admin password: hidden

CUANDO SE INICIA LA PANTALLA DE COMANDOS, se activa el OSmon (Monitoreo del Sistema Operativo)

3.- INICIO DE TRANSACCION:" iniciar la transaccin en el OSmon, mediante las lneas de comando, que se indican:OSmon> startTransaction ENTEL4.- VERIFICACION DEL NOMBRE DE TRANSACCION:

OSmon> gettransactionid

ENTEL

Operation Suceeded

5.- VER CONTENIDO DE LA SIU Y SUS ATRIBUTOS DEL STN=0 (STN=0 ES EL NOMBRE LA SIU)getcontainment ENTEL stn=0

getmoattribute stn=0,

6.- VER EL CONTENIDO COMPLETO DE LA SIU, QUE SE LLAMA stn=0:

OSmon> getcontainment ENTEL stn=0--------------------------------------------------------------------------

STN=0;

STN=0,Equipment=0;

STN=0,EthernetInterface=0;

STN=0,IPInterface=0;

STN=0,Synchronization=0;

STN=0,MeasurementDefinition=0;

STN=0,E1T1Interface=0;

STN=0,TGTransport=PICOTOWER;

STN=0,TGTransport=PICOTOWER,SuperChannel=0;

STN=0,PingMeasurement=0;

OperationSucceeded

7.- VER CADA UNO DE LOS ATRIBUTOS CONFIGURADOS EN LA SIU: stn=0:

OSmon> getmoattribute ENTEL stn=0,EthernetInterface=0-------------------------------------------------

STN=0,EthernetInterface=0; instanceId= 0;

STN=0,EthernetInterface=0; operationalState= enabled;

STN=0,EthernetInterface=0; MAC_Address= C8:35:B8:0A:26:F6;

STN=0,EthernetInterface=0; port= WANFastEthernet;

STN=0,EthernetInterface=0; mode= AUTO;

STN=0,EthernetInterface=0; currentMode= 100MBitfullduplex;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,IPInterface=0----------------------------------------------------------

STN=0,IPInterface=0; instanceId= 0;

STN=0,IPInterface=0; operationalState= enabled;

STN=0,IPInterface=0; depEthernetInterface= 0;

STN=0,IPInterface=0; primaryIP_Address= 192.168.230.6;

STN=0,IPInterface=0; primarySubNetMask= 255.255.255.224;

STN=0,IPInterface=0; MTU= 1500;

STN=0,IPInterface=0; defaultGateway= 192.168.230.1;

STN=0,IPInterface=0; ipDefaultTTL= 64;

STN=0,IPInterface=0; depLinkLayer= STN=0,EthernetInterface=0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,Synchronization=0---------------------------------------------------

STN=0,Synchronization=0; instanceId= 0;

STN=0,Synchronization=0; TS_STN_SynchStatus= synchronized;

STN=0,Synchronization=0; TS_UsedTimeServer= ;

STN=0,Synchronization=0; calibrationExpireDate= 20110420;

STN=0,Synchronization=0; synchType= notDefined;

STN=0,Synchronization=0; DSCP_Synchronization= 0;

STN=0,Synchronization=0; depIP_Interface= stn=0,ipinterface=0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,MeasurementDefinition=0-----------------------------------------

STN=0,MeasurementDefinition=0; instanceId= 0;

STN=0,MeasurementDefinition=0; neIndex= 0;

STN=0,MeasurementDefinition=0; filePrefix= STN;

STN=0,MeasurementDefinition=0; granularityPeriod= 15;

STN=0,MeasurementDefinition=0; reportPeriod= 60;

STN=0,MeasurementDefinition=0; measurementActive= false;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,E1T1Interface=0-----------------------------------------------------

STN=0,E1T1Interface=0; instanceId= 0;

STN=0,E1T1Interface=0; operationalState= enabled;

STN=0,E1T1Interface=0; type= E1;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,TGTransport=PICOTOWER--------------------------------------

STN=0,TGTransport=PICOTOWER; instanceId= PICOTOWER;

STN=0,TGTransport=PICOTOWER; operationalState= disabled;

STN=0,TGTransport=PICOTOWER; PGW_IP_Address= 192.168.231.4;

STN=0,TGTransport=PICOTOWER; depIP_Interface= stn=0,ipinterface=0;

STN=0,TGTransport=PICOTOWER; STN_PGW_LinkStatus= lost;

STN=0,TGTransport=PICOTOWER; overloadThreshold= 10;

STN=0,TGTransport=PICOTOWER; overloadReportInterval= 1;

STN=0,TGTransport=PICOTOWER; DSCP_L2TP_CP= 46;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,TGTransport=PICOTOWER,SuperChannel=0---------------

STN=0,TGTransport=PICOTOWER,SuperChannel=0; instanceId= 0;

STN=0,TGTransport=PICOTOWER,SuperChannel=0; operationalState= enabled;

STN=0,TGTransport=PICOTOWER,SuperChannel=0; depE1T1Interface= 0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,PingMeasurement=0------------------------------------------------

STN=0,PingMeasurement=0; instanceId= 0;

STN=0,PingMeasurement=0; pingDestination= 192.168.231.4;..........PARA EL PING...............STN=0,PingMeasurement=0; pingDSCP= 46;

STN=0,PingMeasurement=0; depIP_Interface= stn=0,ipinterface=0;

STN=0,PingMeasurement=0; pingInterval= 107;

STN=0,PingMeasurement=0; pingPacketSize= 0;

STN=0,PingMeasurement=0; pingTimeout= 20;

OperationSucceeded

8.- PING AL GATEWAY:

OSmon>ping 192.168.230.1------------------------------------------------------------------------------------------

PING (192.168.230.1) 56(84) bytes of data.

64 bytes from 192.168.230.1: icmp_seq=0 ttl=128 time=3.233 ms





--- 192.168.230.1 ping statistics ---

5 packets transmitted, 5 received, 0.0% packet loss

round-trip min/avg/max = 1.000/3.329/3.399 ms

9.- PING AL DESTINO:

OSmon> ping 192.168.231.4----------------------------------------------------------------------------------

PING (192.168.231.4) 56(84) bytes of data.






--- 192.168.231.4 ping statistics ---

5 packets transmitted, 5 received, 0.0% packet loss

round-trip min/avg/max = 1.000/3.246/3.365 ms

10.- PARA VER LAS ALARMAS ACTIVAS EN LA SIU:

OSmon>getalarmlist-----------------------------------------------------------------------------------------

STN=0,TGTransport=PICOTOWER;

alarmId= 1;

eventTime= 1970-01-01 T00:00:36;

eventType= "communicationsAlarm(2)";

perceivedSeverity= "major(2)";

probableCause= "m3100ConnectionEstablishmentError(22)";

specificProblem= "STN-to-BSC Link Down";

additionalText= "The Primary Control Connection to the BSC is disconnected.";

OperationSucceeded

11.- VER LA VERSION DEL SOFTWARE DE LA SIU:

OSmon> getirpversion

12.- VER LA FECHA DE INICIO DEL CLOCK: Ao 2011, mes 01, dia 26OSmon> caldate20110126

OperationSucceeded

13.- VER LA FECHA DE EXPIRACION DEL CLOCK: Ao 2012, mes 01, dia 26OSmon> calexpdate

20120126

OperationSucceeded14.- FINALIZAR TRANSACCION: "si no cierra la transaccion con el nombre de usuario, en este

ejemplo ENTEL, no podrn ingresar nuevos usuarios"

OSmon> endtransaction ENTELCREACION DE BACKUP DE LA CONFIGURCION DE LA SIU (TCU)

1.- CONFIGURAR TARJETA DE RED DE LA PC USADA:

IP:

192.168.1.20 ("20" puede ser cualquier HOST)

Mascara: 255.255.255.02.- HACER CORRER EL PROGRAMA FTP MINI sftp-server, activndolo en START

User:

siu

Password:siu

Port:

22

Routh Path: C:/ ****el disco donde se guarda la copia

C:/siu/ ****en la direccin que se quiera, en este caso

se creo una carpeta de nombre siu3.- HACER CORRER EL PROGRAMA PUTTY (telnet)

4.- CREAR EL BACKUP DE LA CONFIGURCION DEL SIU INDICADO, COPIADO EN EL DISCO DE DESTINO:BACKUP CONFIGURACION SIU (TCU) Login:

admin Password: hidden

**********************************************************************************************************NOTA.- ENTEL es el nombre genrico que usamos como transaccin entre la PC y la SIU.

***********************************************************************************************************OSmon> startsession ENTEL

OperationSucceeded

OSmon> uselocalsftp on

SFTP already set to local OP Port.

OSmon> backup ENTEL sftp://siu:[email protected]/sanandres.xml abcd

OperationSucceeded

*************************************************************************************************************NOTA.- La direccin 192.168.1.20 corresponde a la tarjeta de red de la PC de usuario NOTA.- sanandres es el nombre que uno le asigna a la copia de la configuracin de la siu

Salvada. NOTA.- toda copia salvada se la guarda con extensin .xmlNOTA.- "abcd" es el password requerido para salvar la copia el mismo se requiere para la

RESTAURACION NOTA.- ENTEL es el nombre de usuario*************************************************************************************************************OSmon> getsessionstatus ENTEL

UploadCompleted

OperationSucceeded

OSmon> endsession ENTEL

OperationSucceeded

5.- LA COPIA DEL GUARDADA EN LA COMPUTADORA, SE LA COPIA EN LA MEMORIA DEL SIU, MEDIANTE EL PROCESO DE RESTAURACION, RESTORE:RESTORE CONFIGURACION SIU (TCU)OSmon> startsession ENTEL

OperationSucceeded

OSmon> getsessionstatus ENTEL

Idle

OperationSucceeded



OSmon> download ENTEL sftp://siu:[email protected]/sanandres.xml

OperationSucceeded


DownloadCompleted

OperationSucceeded

OSmon> restore ENTEL abcd

OperationSucceeded


ActivationCompleted

OperationSucceeded


OperationSucceeded

EJEMPLOS DE ALGUNAS ESTACIONES:Ejemplo 1

ESTACION ZONGO:

Description:

Displays Managed Object(MO) attribute values

OSmon> getcontainment ENTEL stn=0

STN=0;

STN=0,VLANGroup=0;

STN=0,Equipment=0;



STN=0,RoutingTable=0;



STN=0,VLANGroup=0,VLAN=22;



STN=0,TGTransport=ZONGO-0;

STN=0,EthernetInterface=LAN;


STN=0,RoutingTable=0,IpRouteSys=0;


STN=0,TGTransport=ZONGO-0,SuperChannel=0;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,VLANGroup=0

STN=0,VLANGroup=0; instanceId= 0;

STN=0,VLANGroup=0; operationalState= enabled;

STN=0,VLANGroup=0; depLinkLayer= STN=0,EthernetInterface=0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,Equipment=0

STN=0,Equipment=0; instanceId= 0;

STN=0,Equipment=0; serialNumber= CB4G298511;

STN=0,Equipment=0; productRevision= R1E;

STN=0,Equipment=0; productNumber= KDU 137 596/2;

STN=0,Equipment=0; manufacturingDate= 20110126;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,IPInterface=0









STN=0,IPInterface=0; depLinkLayer= STN=0,VLANGroup=0,VLAN=2 2;

STN=0,IPInterface=0; depTrafficManager= ;

STN=0,IPInterface=0; trustDSCP= true;

STN=0,IPInterface=0; depDHCPRelayServerGroup= ;

OperationSucceeded










STN=0,IPInterface=1; depLinkLayer= STN=0,VLANGroup=0,VLAN=2 3;




OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,RoutingTable=0

STN=0,RoutingTable=0; instanceId= 0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,E1T1Interface=0




STN=0,E1T1Interface=0; transmitClockSource= localTiming;

STN=0,E1T1Interface=0; receiveClockSource= notUsed;

STN=0,E1T1Interface=0; loopbackMode= off;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,Synchronization=0







STN=0,Synchronization=0; depIP_Interface= ;

STN=0,Synchronization=0; usedSynchSource= ;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,VLANGroup=0,VLAN=22

STN=0,VLANGroup=0,VLAN=22; instanceId= 22;

STN=0,VLANGroup=0,VLAN=22; tagValue= 22;

STN=0,VLANGroup=0,VLAN=22; tagged= true;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,VLANGroup=0,,VLANGroup=0, VLAN=23

OperationFailed CLI syntax error ','

Syntax:

getMOAttribute

Description:


OSmon> getmoattribute ENTEL stn=0,,EthernetInterface=0 OperationFailed CLI syntax error ','

Syntax:

getMOAttribute

Description:


OSmon> getmoattribute ENTEL stn=0,EthernetInterface=0



STN=0,EthernetInterface=0; MAC_Address= 90:55:AE:47:CE:6C;




STN=0,EthernetInterface=0; portNumber= 0;

STN=0,EthernetInterface=0; sendLinkAlarmAllowed= true;

STN=0,EthernetInterface=0; depTrafficManager= ;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,TGTransport=ZONGO-0

STN=0,TGTransport=ZONGO-0; instanceId= ZONGO-0;

STN=0,TGTransport=ZONGO-0; operationalState= enabled;

STN=0,TGTransport=ZONGO-0; PGW_IP_Address= 10.159.199.4;

STN=0,TGTransport=ZONGO-0; depIP_Interface= STN=0,IPInterfa ce=0;

STN=0,TGTransport=ZONGO-0; STN_PGW_LinkStatus= up;

STN=0,TGTransport=ZONGO-0; overloadThreshold= 1000;

STN=0,TGTransport=ZONGO-0; overloadReportInterval= 1;

STN=0,TGTransport=ZONGO-0; DSCP_L2TP_CP= 46;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,EthernetInterface=LAN

STN=0,EthernetInterface=LAN; instanceId= LAN;

STN=0,EthernetInterface=LAN; operationalState= disabled;

STN=0,EthernetInterface=LAN; MAC_Address= 90:55:AE:47:CE:73 ;

STN=0,EthernetInterface=LAN; port= WANFastEthernet;

STN=0,EthernetInterface=LAN; mode= AUTO;

STN=0,EthernetInterface=LAN; currentMode= 10MBithalfduplex;

STN=0,EthernetInterface=LAN; portNumber= 7;

STN=0,EthernetInterface=LAN; sendLinkAlarmAllowed= true;

STN=0,EthernetInterface=LAN; depTrafficManager= ;

OperationSucceeded





STN=0,TGTransport=ZONGO-0; depIP_Interface= STN=0,IPInterface=0;





OperationSucceeded




STN=0,EthernetInterface=LAN; MAC_Address= 90:55:AE:47:CE:73;







OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,MeasurementDefinition=0







OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,RoutingTable=0,IpRouteSys=0

STN=0,RoutingTable=0,IpRouteSys=0; instanceId= 0;

STN=0,RoutingTable=0,IpRouteSys=0; Active= true;

STN=0,RoutingTable=0,IpRouteSys=0; destIpSubnet= 10.159.197.2/30;

STN=0,RoutingTable=0,IpRouteSys=0; nextHopIpAddress= 10.159.197.2;

STN=0,RoutingTable=0,IpRouteSys=0; forwardingInterface= STN=0,IPInter face=0;

STN=0,RoutingTable=0,IpRouteSys=0; routeType= Connected;

STN=0,RoutingTable=0,IpRouteSys=0; admDistance= 0;

OperationSucceeded









OperationSucceeded


STN=0;

STN=0,VLANGroup=0;

STN=0,Equipment=0;

OperationSucceeded



OperationSucceeded








OperationSucceeded










OperationSucceeded





OperationSucceeded




STN=0,EthernetInterface=0; MAC_Address= 90:55:AE:47:CE:6C;







OperationSucceeded





STN=0,TGTransport=ZONGO-0; depIP_Interface= STN=0,IPInterfa ce=0;





OperationSucceeded




STN=0,EthernetInterface=LAN; MAC_Address= 90:55:AE:47:CE:73 ;







OperationSucceeded





STN=0,TGTransport=ZONGO-0; depIP_Interface= STN=0,IPInterface=0;





OperationSucceeded




STN=0,EthernetInterface=LAN; MAC_Address= 90:55:AE:47:CE:73;







OperationSucceeded








OperationSucceeded









OperationSucceeded









OperationSucceeded







OperationSucceeded






STN=0,RoutingTable=0,IpRouteSys=1; forwardingInterface= STN=0,IPInterface=1;



OperationSucceeded









OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,TGTransport=ZONGO-0,SuperChannel=0

STN=0,TGTransport=ZONGO-0,SuperChannel=0; instanceId= 0;

STN=0,TGTransport=ZONGO-0,SuperChannel=0; operationalState= enabled;

STN=0,TGTransport=ZONGO-0,SuperChannel=0; depE1T1Interface= 0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,RoutingTable=0,IpRouteSys=DefaultGateway

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; instanceId= DefaultGateway;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; Active= true;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; destIpSubnet= 0.0.0.0/0;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; nextHopIpAddress= 10.159.197.1;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; forwardingInterface= STN=0,IPInterface=0;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; routeType= Default;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; admDistance= 1;

OperationSucceeded

EJEMPLO 2: Este ejemplo es completo, con creacin de backup, en un equipo SIUSIU: SAN ANDRES DE MACHACA 05-09-13


STN=0;

STN=0,VLANGroup=0;

STN=0,Equipment=0;



STN=0,RoutingTable=0;









STN=0,TGTransport=ANDRESDEMACHACA-0;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway;

STN=0,TGTransport=ANDRESDEMACHACA-0,SuperChannel=0;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,VLANGroup=0

STN=0,VLANGroup=0; instanceId= 0;

STN=0,VLANGroup=0; operationalState= enabled;

STN=0,VLANGroup=0; depLinkLayer= STN=0,EthernetInterface=0;

OperationSucceeded







OperationSucceeded










STN=0,IPInterface=0; depLinkLayer= STN=0,VLANGroup=0,VLAN=2201;




OperationSucceeded










STN=0,IPInterface=1; depLinkLayer= STN=0,VLANGroup=0,VLAN=2202;




OperationSucceeded



OperationSucceeded








OperationSucceeded




STN=0,EthernetInterface=0; MAC_Address= 90:55:AE:47:C5:CA;



STN=0,EthernetInterface=0; currentMode= 100MBithalfduplex;




OperationSucceeded










OperationSucceeded





OperationSucceeded





OperationSucceeded








OperationSucceeded









OperationSucceeded









OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,TGTransport=ANDRESDEMACHACA-0

STN=0,TGTransport=ANDRESDEMACHACA-0; instanceId= ANDRESDEMACHACA-0;

STN=0,TGTransport=ANDRESDEMACHACA-0; operationalState= enabled;

STN=0,TGTransport=ANDRESDEMACHACA-0; PGW_IP_Address= 10.159.199.4;

STN=0,TGTransport=ANDRESDEMACHACA-0; depIP_Interface= STN=0,IPInterface=0;

STN=0,TGTransport=ANDRESDEMACHACA-0; STN_PGW_LinkStatus= up;

STN=0,TGTransport=ANDRESDEMACHACA-0; overloadThreshold= 1000;

STN=0,TGTransport=ANDRESDEMACHACA-0; overloadReportInterval= 1;

STN=0,TGTransport=ANDRESDEMACHACA-0; DSCP_L2TP_CP= 46;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,RoutingTable=0,IpRouteSys=DefaultGateway

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; instanceId= DefaultGateway;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; Active= true;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; destIpSubnet= 0.0.0.0/0;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; nextHopIpAddress= 10.159.92.1;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; forwardingInterface= STN=0,IPInterface=0;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; routeType= Default;

STN=0,RoutingTable=0,IpRouteSys=DefaultGateway; admDistance= 1;

OperationSucceeded

OSmon> getmoattribute ENTEL stn=0,TGTransport=ANDRESDEMACHACA-0,SuperChannel=0

STN=0,TGTransport=ANDRESDEMACHACA-0,SuperChannel=0; instanceId= 0;

STN=0,TGTransport=ANDRESDEMACHACA-0,SuperChannel=0; operationalState= enabled;

STN=0,TGTransport=ANDRESDEMACHACA-0,SuperChannel=0; depE1T1Interface= 0;

OperationSucceeded

OSmon> CALDATE

20110126

OperationSucceeded

OSmon> CALEXPDATE

20120126

OperationSucceeded


OperationSucceeded

Copia de backup de san Andres de machaca SIU

OSmon> startsession ENTEL

OperationSucceeded

OSmon> uselocalsftp onSFT



OSmon> backup test1 sftp://siu:[email protected]/sanandreslp.xml abcd

OperationFailed

OperationFailed Session 'test1' not started

OSmon> backup ENTEL sftp://siu:[email protected]/sanandreslp.xml abcd

OperationSucceeded


UploadCompleted

OperationSucceeded


OperationSucceeded

3

manual del mantenimiento preventivo de la siu 2013

Documents