hojas-calculo - caballete

Upload: juan-jose-ramirez-aparcana

Post on 02-Jun-2018

235 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/10/2019 Hojas-calculo - Caballete

    1/128

    COMPAA MINERA ANTAMINA S.A.PLAN DE TRABAJO REFORZAMIENTO DE LA

    FAJA 220-CVB-001

    SD-CO-INF-12389DBN-001

    Contrato:MOB2213Revisin : 0Fecha : DICIEMBRE 2013Pgina 1 de 1MEMORIA DE CLCULO

    COMPAA MINERA ANTAMINA S.A.

    MEMORIA DE CLCULO DE CABALLETE DE 1.5 TON DE CAPACIDAD

  • 8/10/2019 Hojas-calculo - Caballete

    2/128

    NDICE

    1.- DATOS DE OBRA................................................................................................................ 21.1.- Normas consideradas............................................................................................... 2

    2.- ESTRUCTURA..................................................................................................................... 2

    2.1.- Cargas..................................................................................................................... 22.1.1.- Nudos..............................................................................................................22.1.2.- Barras............................................................................................................. 2

    2.2.- Resultados............................................................................................................... 32.2.1.- Nudos..............................................................................................................32.2.2.- Barras............................................................................................................. 8

  • 8/10/2019 Hojas-calculo - Caballete

    3/128

    1.- DATOS DE OBRA1.1.- Normas consideradas

    Aceros laminados y armados: ANSI/AISC 360-10 (LRFD)

    2.- ESTRUCTURA2.1.- Cargas2.1.1.- Nudos

    Cargas en nudos

    Referencia Hiptesis Cargas puntuales(t)Direccin

    X Y ZN19 CM 1 1.650 0.000 0.000 -1.000

    2.1.2.- BarrasReferencias:

    'P1', 'P2':Cargas puntuales, uniformes, en faja y momentos puntuales: 'P1' es el valor de la carga. 'P2' no seutiliza.Cargas trapezoidales: 'P1' es el valor de la carga en el punto donde comienza (L1) y 'P2' es el valorde la carga en el punto donde termina (L2).Cargas triangulares: 'P1' es el valor mximo de la carga. 'P2' no se utiliza.Incrementos de temperatura: 'P1' y 'P2' son los valores de la temperatura en las caras exteriores oparamentos de la pieza. La orientacin de la variacin del incremento de temperatura sobre laseccin transversal depender de la direccin seleccionada.

    'L1', 'L2':Cargas y momentos puntuales: 'L1' es la distancia entre el nudo inicial de la barra y la posicindonde se aplica la carga. 'L2' no se utiliza.Cargas trapezoidales, en faja, y triangulares: 'L1' es la distancia entre el nudo inicial de la barra y laposicin donde comienza la carga, 'L2' es la distancia entre el nudo inicial de la barra y la posicindonde termina la carga.

    Unidades:Cargas puntuales: tMomentos puntuales: tm.Cargas uniformes, en faja, triangulares y trapezoidales: t/m.Incrementos de temperatura: C.

    Cargas en barras

    Barra Hiptesis TipoValores Posicin Direccin

    P1 P2 L1(m)L2

    (m) Ejes X Y Z

    N3/N4 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N4/N6 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N6/N1 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N2/N5 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N5/N7 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 2

  • 8/10/2019 Hojas-calculo - Caballete

    4/128

    Cargas en barras

    Barra Hiptesis TipoValores Posicin Direccin

    P1 P2 L1(m)L2

    (m) Ejes X Y Z

    N7/N1 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N4/N5 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000

    N6/N16 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000N16/N7 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000

    N10/N11 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N11/N13 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N13/N8 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N9/N12 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000

    N12/N14 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000N14/N8 Peso propio Uniforme 0.011 - - - Globales 0.000 0.000 -1.000

    N13/N18 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000N18/N14 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000N11/N12 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000N1/N15 Peso propio Uniforme 0.022 - - - Globales 0.000 0.000 -1.000

    N15/N19 Peso propio Uniforme 0.022 - - - Globales 0.000 0.000 -1.000N19/N17 Peso propio Uniforme 0.022 - - - Globales 0.000 0.000 -1.000N17/N8 Peso propio Uniforme 0.022 - - - Globales 0.000 0.000 -1.000

    N16/N15 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000N18/N17 Peso propio Uniforme 0.005 - - - Globales 0.000 0.000 -1.000

    2.2.- Resultados2.2.1.- Nudos2 .2 .1 .1 . - D es p la za m ie n t o s

    Referencias:Dx, Dy, Dz: Desplazamientos de los nudos en ejes globales.Gx, Gy, Gz: Giros de los nudos en ejes globales.

    2 .2 .1 .1 .1 . - H ip t es is

    Desplazamientos de los nudos, por hiptesis

    Referencia DescripcinDesplazamientos en ejes globales

    Dx(mm)

    Dy(mm)

    Dz(mm)

    Gx(mRad)

    Gy(mRad)

    Gz(mRad)

    N1 Peso propio 0.000 0.000 -0.002 -0.028 0.000 0.000

    CM 1 0.000 0.000 -0.024 -1.570 0.000 0.000N2 Peso propio 0.000 0.000 0.000 0.021 -0.002 0.008CM 1 0.000 0.000 0.000 1.173 -0.012 0.437

    N3 Peso propio 0.000 0.000 0.000 0.021 0.002 -0.008CM 1 0.000 0.000 0.000 1.173 0.012 -0.437

    N4 Peso propio 0.000 -0.015 -0.001 0.010 0.000 -0.005CM 1 0.000 -0.857 -0.012 0.562 -0.016 -0.298

    N5 Peso propio 0.000 -0.015 -0.001 0.010 0.000 0.005CM 1 0.000 -0.857 -0.012 0.562 0.016 0.298

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 3

  • 8/10/2019 Hojas-calculo - Caballete

    5/128

    Desplazamientos de los nudos, por hiptesis

    Referencia DescripcinDesplazamientos en ejes globales

    Dx(mm)

    Dy(mm)

    Dz(mm)

    Gx(mRad)

    Gy(mRad)

    Gz(mRad)

    N6 Peso propio 0.000 -0.015 -0.002 -0.013 0.002 -0.003CM 1 0.001 -0.875 -0.022 -0.748 0.078 -0.181

    N7 Peso propio 0.000 -0.015 -0.002 -0.013 -0.002 0.003CM 1 -0.001 -0.875 -0.022 -0.748 -0.078 0.181

    N8 Peso propio 0.000 0.000 -0.002 0.028 0.000 0.000CM 1 0.000 0.000 -0.024 1.570 0.000 0.000

    N9 Peso propio 0.000 0.000 0.000 -0.021 -0.002 -0.008CM 1 0.000 0.000 0.000 -1.173 -0.012 -0.437

    N10 Peso propio 0.000 0.000 0.000 -0.021 0.002 0.008CM 1 0.000 0.000 0.000 -1.173 0.012 0.437

    N11 Peso propio 0.000 0.015 -0.001 -0.010 0.000 0.005CM 1 0.000 0.857 -0.012 -0.562 -0.016 0.298

    N12 Peso propio 0.000 0.015 -0.001 -0.010 0.000 -0.005CM 1 0.000 0.857 -0.012 -0.562 0.016 -0.298

    N13 Peso propio 0.000 0.015 -0.002 0.013 0.002 0.003CM 1 0.001 0.875 -0.022 0.748 0.078 0.181

    N14 Peso propio 0.000 0.015 -0.002 0.013 -0.002 -0.003CM 1 -0.001 0.875 -0.022 0.748 -0.078 -0.181

    N15 Peso propio 0.000 0.000 -0.011 -0.024 0.000 0.000CM 1 0.000 0.001 -0.535 -1.477 0.000 0.000

    N16 Peso propio 0.000 -0.016 -0.002 -0.018 0.000 0.000CM 1 0.000 -0.901 -0.054 -0.938 0.000 0.000

    N17 Peso propio 0.000 0.000 -0.011 0.024 0.000 0.000CM 1 0.000 -0.001 -0.535 1.477 0.000 0.000

    N18 Peso propio 0.000 0.016 -0.002 0.018 0.000 0.000CM 1 0.000 0.901 -0.054 0.938 0.000 0.000

    N19 Peso propio 0.000 0.000 -0.019 0.000 0.000 0.000CM 1 0.000 0.000 -1.112 0.000 0.000 0.000

    2 .2 .1 .1 .2 . - Co m b in ac io n es

    Desplazamientos de los nudos, por combinacin

    Referencia

    Combinacin Desplazamientos en ejes globales

    Tipo Descripcin Dx(mm) Dy(mm) Dz(mm) Gx(mRad) Gy(mRad) Gz(mRad)N1 Desplazamientos PP+CM1 0.000 0.000 -0.026 -1.598 0.000 0.000N2 Desplazamientos PP+CM1 0.000 0.000 0.000 1.194 -0.013 0.445N3 Desplazamientos PP+CM1 0.000 0.000 0.000 1.194 0.013 -0.445N4 Desplazamientos PP+CM1 0.000 -0.872 -0.013 0.572 -0.016 -0.303N5 Desplazamientos PP+CM1 0.000 -0.872 -0.013 0.572 0.016 0.303N6 Desplazamientos PP+CM1 0.001 -0.890 -0.023 -0.761 0.080 -0.184N7 Desplazamientos PP+CM1 -0.001 -0.890 -0.023 -0.761 -0.080 0.184

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 4

  • 8/10/2019 Hojas-calculo - Caballete

    6/128

    Desplazamientos de los nudos, por combinacin

    ReferenciaCombinacin Desplazamientos en ejes globales

    Tipo Descripcin Dx(mm)Dy

    (mm)Dz

    (mm)Gx

    (mRad)Gy

    (mRad)Gz

    (mRad)N8 Desplazamientos PP+CM1 0.000 0.000 -0.026 1.598 0.000 0.000N9 Desplazamientos PP+CM1 0.000 0.000 0.000 -1.194 -0.013 -0.445

    N10 Desplazamientos PP+CM1 0.000 0.000 0.000 -1.194 0.013 0.445N11 Desplazamientos PP+CM1 0.000 0.872 -0.013 -0.572 -0.016 0.303N12 Desplazamientos PP+CM1 0.000 0.872 -0.013 -0.572 0.016 -0.303N13 Desplazamientos PP+CM1 0.001 0.890 -0.023 0.761 0.080 0.184N14 Desplazamientos PP+CM1 -0.001 0.890 -0.023 0.761 -0.080 -0.184N15 Desplazamientos PP+CM1 0.000 0.001 -0.546 -1.501 0.000 0.000N16 Desplazamientos PP+CM1 0.000 -0.917 -0.056 -0.956 0.000 0.000N17 Desplazamientos PP+CM1 0.000 -0.001 -0.546 1.501 0.000 0.000N18 Desplazamientos PP+CM1 0.000 0.917 -0.056 0.956 0.000 0.000N19 Desplazamientos PP+CM1 0.000 0.000 -1.131 0.000 0.000 0.000

    2 .2 .1 .1 .3 .- En v o lv en t es

    Envolvente de los desplazamientos en nudos

    ReferenciaCombinacin Desplazamientos en ejes globales

    Tipo Descripcin Dx(mm)Dy

    (mm)Dz

    (mm)Gx

    (mRad)Gy

    (mRad)Gz

    (mRad)N1 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 -0.026 -1.598 0.000 0.000

    Valor mximo de la envolvente 0.000 0.000 -0.026 -1.598 0.000 0.000N2 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 0.000 1.194 -0.013 0.445

    Valor mximo de la envolvente 0.000 0.000 0.000 1.194 -0.013 0.445

    N3 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 0.000 1.194 0.013 -0.445Valor mximo de la envolvente 0.000 0.000 0.000 1.194 0.013 -0.445N4 Desplazamientos Valor mnimo de la envolvente 0.000 -0.872 -0.013 0.572 -0.016 -0.303

    Valor mximo de la envolvente 0.000 -0.872 -0.013 0.572 -0.016 -0.303N5 Desplazamientos Valor mnimo de la envolvente 0.000 -0.872 -0.013 0.572 0.016 0.303

    Valor mximo de la envolvente 0.000 -0.872 -0.013 0.572 0.016 0.303N6 Desplazamientos Valor mnimo de la envolvente 0.001 -0.890 -0.023 -0.761 0.080 -0.184

    Valor mximo de la envolvente 0.001 -0.890 -0.023 -0.761 0.080 -0.184N7 Desplazamientos Valor mnimo de la envolvente -0.001 -0.890 -0.023 -0.761 -0.080 0.184

    Valor mximo de la envolvente -0.001 -0.890 -0.023 -0.761 -0.080 0.184N8 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 -0.026 1.598 0.000 0.000

    Valor mximo de la envolvente 0.000 0.000 -0.026 1.598 0.000 0.000N9 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 0.000 -1.194 -0.013 -0.445

    Valor mximo de la envolvente 0.000 0.000 0.000 -1.194 -0.013 -0.445N10 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 0.000 -1.194 0.013 0.445

    Valor mximo de la envolvente 0.000 0.000 0.000 -1.194 0.013 0.445N11 Desplazamientos Valor mnimo de la envolvente 0.000 0.872 -0.013 -0.572 -0.016 0.303

    Valor mximo de la envolvente 0.000 0.872 -0.013 -0.572 -0.016 0.303N12 Desplazamientos Valor mnimo de la envolvente 0.000 0.872 -0.013 -0.572 0.016 -0.303

    Valor mximo de la envolvente 0.000 0.872 -0.013 -0.572 0.016 -0.303N13 Desplazamientos Valor mnimo de la envolvente 0.001 0.890 -0.023 0.761 0.080 0.184

    Valor mximo de la envolvente 0.001 0.890 -0.023 0.761 0.080 0.184

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 5

  • 8/10/2019 Hojas-calculo - Caballete

    7/128

    Envolvente de los desplazamientos en nudos

    ReferenciaCombinacin Desplazamientos en ejes globales

    Tipo Descripcin Dx(mm)Dy

    (mm)Dz

    (mm)Gx

    (mRad)Gy

    (mRad)Gz

    (mRad)

    N14 Desplazamientos Valor mnimo de la envolvente -0.001 0.890 -0.023 0.761 -0.080 -0.184Valor mximo de la envolvente -0.001 0.890 -0.023 0.761 -0.080 -0.184

    N15 Desplazamientos Valor mnimo de la envolvente 0.000 0.001 -0.546 -1.501 0.000 0.000Valor mximo de la envolvente 0.000 0.001 -0.546 -1.501 0.000 0.000

    N16 Desplazamientos Valor mnimo de la envolvente 0.000 -0.917 -0.056 -0.956 0.000 0.000Valor mximo de la envolvente 0.000 -0.917 -0.056 -0.956 0.000 0.000

    N17 Desplazamientos Valor mnimo de la envolvente 0.000 -0.001 -0.546 1.501 0.000 0.000Valor mximo de la envolvente 0.000 -0.001 -0.546 1.501 0.000 0.000

    N18 Desplazamientos Valor mnimo de la envolvente 0.000 0.917 -0.056 0.956 0.000 0.000Valor mximo de la envolvente 0.000 0.917 -0.056 0.956 0.000 0.000

    N19 Desplazamientos Valor mnimo de la envolvente 0.000 0.000 -1.131 0.000 0.000 0.000Valor mximo de la envolvente 0.000 0.000 -1.131 0.000 0.000 0.000

    2 .2 .1 .2 . - Re ac c io n es Referencias:

    Rx, Ry, Rz: Reacciones en nudos con desplazamientos coaccionados (fuerzas).Mx, My, Mz: Reacciones en nudos con giros coaccionados (momentos).

    2 .2 .1 .2 .1 . - H ip t es is

    Reacciones en los nudos, por hiptesis

    Referencia DescripcinReacciones en ejes globales

    Rx(t)

    Ry(t)

    Rz(t)

    Mx(tm)

    My(tm)

    Mz(tm)

    N2 Peso propio -0.008 0.001 0.039 0.000 0.000 0.000

    CM 1 -0.092 0.047 0.413 0.000 0.000 0.000N3 Peso propio 0.008 0.001 0.039 0.000 0.000 0.000CM 1 0.092 0.047 0.413 0.000 0.000 0.000

    N9 Peso propio -0.008 -0.001 0.039 0.000 0.000 0.000CM 1 -0.092 -0.047 0.413 0.000 0.000 0.000

    N10 Peso propio 0.008 -0.001 0.039 0.000 0.000 0.000CM 1 0.092 -0.047 0.413 0.000 0.000 0.000

    2 .2 .1 .2 .2 . - Co m b in ac io n es

    Reacciones en los nudos, por combinacin

    ReferenciaCombinacin Reacciones en ejes globales

    Tipo Descripcin Rx(t)Ry(t)

    Rz(t)

    Mx(tm)

    My(tm)

    Mz(tm)

    N2 Hormign en cimentaciones 0.9PP+0.9CM1 -0.090 0.043 0.406 0.000 0.000 0.0001.4PP+0.9CM1 -0.094 0.044 0.426 0.000 0.000 0.0000.9PP+1.4CM1 -0.135 0.067 0.613 0.000 0.000 0.0001.4PP+1.4CM1 -0.139 0.067 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno PP+CM1 -0.100 0.048 0.451 0.000 0.000 0.000N3 Hormign en cimentaciones 0.9PP+0.9CM1 0.090 0.043 0.406 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 6

  • 8/10/2019 Hojas-calculo - Caballete

    8/128

    Reacciones en los nudos, por combinacin

    ReferenciaCombinacin Reacciones en ejes globales

    Tipo Descripcin Rx(t)Ry(t)

    Rz(t)

    Mx(tm)

    My(tm)

    Mz(tm)

    1.4PP+0.9CM1 0.094 0.044 0.426 0.000 0.000 0.0000.9PP+1.4CM1 0.135 0.067 0.613 0.000 0.000 0.0001.4PP+1.4CM1 0.139 0.067 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno PP+CM1 0.100 0.048 0.451 0.000 0.000 0.000N9 Hormign en cimentaciones 0.9PP+0.9CM1 -0.090 -0.043 0.406 0.000 0.000 0.000

    1.4PP+0.9CM1 -0.094 -0.044 0.426 0.000 0.000 0.0000.9PP+1.4CM1 -0.135 -0.067 0.613 0.000 0.000 0.0001.4PP+1.4CM1 -0.139 -0.067 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno PP+CM1 -0.100 -0.048 0.451 0.000 0.000 0.000N10 Hormign en cimentaciones 0.9PP+0.9CM1 0.090 -0.043 0.406 0.000 0.000 0.000

    1.4PP+0.9CM1 0.094 -0.044 0.426 0.000 0.000 0.0000.9PP+1.4CM1 0.135 -0.067 0.613 0.000 0.000 0.0001.4PP+1.4CM1 0.139 -0.067 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno PP+CM1 0.100 -0.048 0.451 0.000 0.000 0.000

    Nota: Las combinaciones de hormign indicadas son las mismas que se utilizan para comprobar el estadolmite de equilibrio en la cimentacin.

    2 .2 .1 .2 .3 .- En v o lv en t es

    Envolventes de las reacciones en nudos

    ReferenciaCombinacin Reacciones en ejes globales

    Tipo Descripcin Rx

    (t)

    Ry

    (t)

    Rz

    (t)

    Mx

    (tm)

    My

    (tm)

    Mz

    (tm)N2 Hormign en cimentaciones Valor mnimo de la envolvente -0.139 0.043 0.406 0.000 0.000 0.000Valor mximo de la envolvente -0.090 0.067 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno Valor mnimo de la envolvente -0.100 0.048 0.451 0.000 0.000 0.000Valor mximo de la envolvente -0.100 0.048 0.451 0.000 0.000 0.000

    N3 Hormign en cimentaciones Valor mnimo de la envolvente 0.090 0.043 0.406 0.000 0.000 0.000Valor mximo de la envolvente 0.139 0.067 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno Valor mnimo de la envolvente 0.100 0.048 0.451 0.000 0.000 0.000Valor mximo de la envolvente 0.100 0.048 0.451 0.000 0.000 0.000

    N9 Hormign en cimentaciones Valor mnimo de la envolvente -0.139 -0.067 0.406 0.000 0.000 0.000Valor mximo de la envolvente -0.090 -0.043 0.632 0.000 0.000 0.000

    Tensiones sobre el terreno Valor mnimo de la envolvente -0.100 -0.048 0.451 0.000 0.000 0.000Valor mximo de la envolvente -0.100 -0.048 0.451 0.000 0.000 0.000

    N10 Hormign en cimentaciones Valor mnimo de la envolvente 0.090 -0.067 0.406 0.000 0.000 0.000Valor mximo de la envolvente 0.139 -0.043 0.632 0.000 0.000 0.000Tensiones sobre el terreno Valor mnimo de la envolvente 0.100 -0.048 0.451 0.000 0.000 0.000

    Valor mximo de la envolvente 0.100 -0.048 0.451 0.000 0.000 0.000

    Nota: Las combinaciones de hormign indicadas son las mismas que se utilizan para comprobar el estadolmite de equilibrio en la cimentacin.

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 7

  • 8/10/2019 Hojas-calculo - Caballete

    9/128

    2.2.2.- Barras2 .2 .2 .1 . - Esf u er zo s

    Referencias:

    N: Esfuerzo axil (t)Vy: Esfuerzo cortante segn el eje local Y de la barra. (t)Vz: Esfuerzo cortante segn el eje local Z de la barra. (t)Mt: Momento torsor (tm)My: Momento flector en el plano 'XZ' (giro de la seccin respecto al eje local 'Y' de la barra). (tm)Mz: Momento flector en el plano 'XY' (giro de la seccin respecto al eje local 'Z' de la barra). (tm)

    2 .2 .2 .1 .1 . - H ip t es is

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN3/N4 Peso propio N -0.040 -0.037 -0.035 -0.033 -0.031

    Vy -0.001 -0.001 -0.001 -0.001 -0.001Vz -0.001 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.000 0.000 0.000 0.001 0.001

    CM 1 N -0.423 -0.423 -0.423 -0.423 -0.423Vy -0.047 -0.047 -0.047 -0.047 -0.047Vz -0.002 -0.002 -0.002 -0.002 -0.002Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.002Mz 0.000 0.010 0.020 0.029 0.039

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN4/N6 Peso propio N -0.029 -0.027 -0.025 -0.023 -0.022

    Vy -0.001 -0.001 -0.001 -0.001 -0.001Vz 0.000 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.001 0.001 0.001 0.001 0.001

    CM 1 N -0.427 -0.427 -0.427 -0.427 -0.427Vy -0.047 -0.047 -0.047 -0.047 -0.047Vz 0.018 0.018 0.018 0.018 0.018Mt -0.005 -0.005 -0.005 -0.005 -0.005My 0.002 -0.001 -0.004 -0.007 -0.010Mz 0.038 0.045 0.053 0.060 0.068

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 8

  • 8/10/2019 Hojas-calculo - Caballete

    10/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    N6/N1 Peso propio N -0.014 -0.012 -0.010 -0.008 -0.006Vy 0.002 0.002 0.002 0.002 0.002Vz 0.000 0.000 0.001 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.001 0.001 0.001 0.000 0.000

    CM 1 N -0.113 -0.113 -0.113 -0.113 -0.113Vy 0.093 0.093 0.093 0.093 0.093Vz 0.024 0.024 0.024 0.024 0.024Mt 0.000 0.000 0.000 0.000 0.000My 0.011 0.007 0.003 -0.001 -0.005

    Mz 0.064 0.047 0.031 0.015 -0.001

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN2/N5 Peso propio N -0.040 -0.037 -0.035 -0.033 -0.031

    Vy 0.001 0.001 0.001 0.001 0.001Vz -0.001 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.000 0.000 0.000 -0.001 -0.001

    CM 1 N -0.423 -0.423 -0.423 -0.423 -0.423Vy 0.047 0.047 0.047 0.047 0.047Vz -0.002 -0.002 -0.002 -0.002 -0.002Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.002Mz 0.000 -0.010 -0.020 -0.029 -0.039

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN5/N7 Peso propio N -0.029 -0.027 -0.025 -0.023 -0.022

    Vy 0.001 0.001 0.001 0.001 0.001Vz 0.000 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz -0.001 -0.001 -0.001 -0.001 -0.001

    CM 1 N -0.427 -0.427 -0.427 -0.427 -0.427Vy 0.047 0.047 0.047 0.047 0.047Vz 0.018 0.018 0.018 0.018 0.018

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 9

  • 8/10/2019 Hojas-calculo - Caballete

    11/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 m

    Mt 0.005 0.005 0.005 0.005 0.005My 0.002 -0.001 -0.004 -0.007 -0.010Mz -0.038 -0.045 -0.053 -0.060 -0.068

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN7/N1 Peso propio N -0.014 -0.012 -0.010 -0.008 -0.006

    Vy -0.002 -0.002 -0.002 -0.002 -0.002Vz 0.000 0.000 0.001 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000

    My 0.000 0.000 0.000 0.000 0.000Mz -0.001 -0.001 -0.001 0.000 0.000CM 1 N -0.113 -0.113 -0.113 -0.113 -0.113

    Vy -0.093 -0.093 -0.093 -0.093 -0.093Vz 0.024 0.024 0.024 0.024 0.024Mt 0.000 0.000 0.000 0.000 0.000My 0.011 0.007 0.003 -0.001 -0.005Mz -0.064 -0.047 -0.031 -0.015 0.001

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra

    0.000 m 0.294 m 0.588 mN4/N5 Peso propio N -0.002 -0.002 -0.002

    Vy 0.000 0.000 0.000Vz -0.002 0.000 0.002Mt 0.000 0.000 0.000My 0.000 0.000 0.000Mz 0.000 0.000 0.000

    CM 1 N 0.021 0.021 0.021Vy 0.000 0.000 0.000Vz 0.000 0.000 0.000Mt 0.000 0.000 0.000

    My 0.000 0.000 0.000Mz 0.006 0.006 0.006

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 mN6/N16 Peso propio N -0.003 -0.003 -0.003

    Vy -0.002 -0.002 -0.002

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 10

  • 8/10/2019 Hojas-calculo - Caballete

    12/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 m

    Vz -0.007 -0.007 -0.006Mt 0.000 0.000 0.000My 0.000 0.000 0.001Mz 0.000 0.000 0.000

    CM 1 N -0.064 -0.064 -0.064Vy -0.141 -0.141 -0.141Vz -0.308 -0.308 -0.308Mt -0.005 -0.005 -0.005My -0.021 0.003 0.026Mz -0.004 0.007 0.017

    Esfuerzos en barras, por hiptesisBarra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 m

    N16/N7 Peso propio N -0.003 -0.003 -0.003Vy 0.002 0.002 0.002Vz 0.006 0.007 0.007Mt 0.000 0.000 0.000My 0.001 0.000 0.000Mz 0.000 0.000 0.000

    CM 1 N -0.064 -0.064 -0.064Vy 0.141 0.141 0.141

    Vz 0.308 0.308 0.308Mt 0.005 0.005 0.005My 0.026 0.003 -0.021Mz 0.017 0.007 -0.004

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN10/N11 Peso propio N -0.040 -0.037 -0.035 -0.033 -0.031

    Vy 0.001 0.001 0.001 0.001 0.001Vz -0.001 0.000 0.000 0.001 0.001

    Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.000 0.000 0.000 -0.001 -0.001

    CM 1 N -0.423 -0.423 -0.423 -0.423 -0.423Vy 0.047 0.047 0.047 0.047 0.047Vz -0.002 -0.002 -0.002 -0.002 -0.002Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.002

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 11

  • 8/10/2019 Hojas-calculo - Caballete

    13/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    Mz 0.000 -0.010 -0.020 -0.029 -0.039

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN11/N13 Peso propio N -0.029 -0.027 -0.025 -0.023 -0.022

    Vy 0.001 0.001 0.001 0.001 0.001Vz 0.000 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz -0.001 -0.001 -0.001 -0.001 -0.001

    CM 1 N -0.427 -0.427 -0.427 -0.427 -0.427Vy 0.047 0.047 0.047 0.047 0.047Vz 0.018 0.018 0.018 0.018 0.018Mt 0.005 0.005 0.005 0.005 0.005My 0.002 -0.001 -0.004 -0.007 -0.010Mz -0.038 -0.045 -0.053 -0.060 -0.068

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN13/N8 Peso propio N -0.014 -0.012 -0.010 -0.008 -0.006

    Vy -0.002 -0.002 -0.002 -0.002 -0.002Vz 0.000 0.000 0.001 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz -0.001 -0.001 -0.001 0.000 0.000

    CM 1 N -0.113 -0.113 -0.113 -0.113 -0.113Vy -0.093 -0.093 -0.093 -0.093 -0.093Vz 0.024 0.024 0.024 0.024 0.024Mt 0.000 0.000 0.000 0.000 0.000My 0.011 0.007 0.003 -0.001 -0.005Mz -0.064 -0.047 -0.031 -0.015 0.001

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN9/N12 Peso propio N -0.040 -0.037 -0.035 -0.033 -0.031

    Vy -0.001 -0.001 -0.001 -0.001 -0.001Vz -0.001 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 12

  • 8/10/2019 Hojas-calculo - Caballete

    14/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    My 0.000 0.000 0.000 0.000 0.000Mz 0.000 0.000 0.000 0.001 0.001CM 1 N -0.423 -0.423 -0.423 -0.423 -0.423

    Vy -0.047 -0.047 -0.047 -0.047 -0.047Vz -0.002 -0.002 -0.002 -0.002 -0.002Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.002Mz 0.000 0.010 0.020 0.029 0.039

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra

    0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN12/N14 Peso propio N -0.029 -0.027 -0.025 -0.023 -0.022Vy -0.001 -0.001 -0.001 -0.001 -0.001Vz 0.000 0.000 0.000 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.001 0.001 0.001 0.001 0.001

    CM 1 N -0.427 -0.427 -0.427 -0.427 -0.427Vy -0.047 -0.047 -0.047 -0.047 -0.047Vz 0.018 0.018 0.018 0.018 0.018Mt -0.005 -0.005 -0.005 -0.005 -0.005

    My 0.002 -0.001 -0.004 -0.007 -0.010Mz 0.038 0.045 0.053 0.060 0.068

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN14/N8 Peso propio N -0.014 -0.012 -0.010 -0.008 -0.006

    Vy 0.002 0.002 0.002 0.002 0.002Vz 0.000 0.000 0.001 0.001 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000

    Mz 0.001 0.001 0.001 0.000 0.000CM 1 N -0.113 -0.113 -0.113 -0.113 -0.113

    Vy 0.093 0.093 0.093 0.093 0.093Vz 0.024 0.024 0.024 0.024 0.024Mt 0.000 0.000 0.000 0.000 0.000My 0.011 0.007 0.003 -0.001 -0.005Mz 0.064 0.047 0.031 0.015 -0.001

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 13

  • 8/10/2019 Hojas-calculo - Caballete

    15/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 m

    N13/N18 Peso propio N -0.003 -0.003 -0.003Vy 0.002 0.002 0.002Vz -0.007 -0.007 -0.006Mt 0.000 0.000 0.000My 0.000 0.000 0.001Mz 0.000 0.000 0.000

    CM 1 N -0.064 -0.064 -0.064Vy 0.141 0.141 0.141Vz -0.308 -0.308 -0.308Mt 0.005 0.005 0.005My -0.021 0.003 0.026

    Mz 0.004 -0.007 -0.017

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 mN18/N14 Peso propio N -0.003 -0.003 -0.003

    Vy -0.002 -0.002 -0.002Vz 0.006 0.007 0.007Mt 0.000 0.000 0.000My 0.001 0.000 0.000Mz 0.000 0.000 0.000

    CM 1 N -0.064 -0.064 -0.064Vy -0.141 -0.141 -0.141Vz 0.308 0.308 0.308Mt -0.005 -0.005 -0.005My 0.026 0.003 -0.021Mz -0.017 -0.007 0.004

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.294 m 0.588 mN11/N12 Peso propio N -0.002 -0.002 -0.002

    Vy 0.000 0.000 0.000Vz -0.002 0.000 0.002Mt 0.000 0.000 0.000My 0.000 0.000 0.000Mz 0.000 0.000 0.000

    CM 1 N 0.021 0.021 0.021Vy 0.000 0.000 0.000Vz 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 14

  • 8/10/2019 Hojas-calculo - Caballete

    16/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.294 m 0.588 m

    Mt 0.000 0.000 0.000My 0.000 0.000 0.000Mz -0.006 -0.006 -0.006

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.165 m 0.330 mN1/N15 Peso propio N 0.003 0.003 0.003

    Vy 0.000 0.000 0.000Vz -0.012 -0.008 -0.005Mt 0.000 0.000 0.000

    My 0.000 0.002 0.003Mz 0.000 0.000 0.000CM 1 N 0.187 0.187 0.187

    Vy 0.000 0.000 0.000Vz -0.210 -0.210 -0.210Mt 0.000 0.000 0.000My 0.002 0.036 0.071Mz 0.000 0.000 0.000

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra

    0.000 m 0.297 m 0.595 mN15/N19 Peso propio N -0.002 -0.002 -0.002

    Vy 0.000 0.000 0.000Vz -0.013 -0.007 0.000Mt 0.000 0.000 0.000My 0.003 0.006 0.007Mz 0.000 0.000 0.000

    CM 1 N -0.095 -0.095 -0.095Vy 0.000 0.000 0.000Vz -0.825 -0.825 -0.825Mt 0.000 0.000 0.000

    My 0.074 0.319 0.565Mz 0.000 0.000 0.000

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.297 m 0.595 mN19/N17 Peso propio N -0.002 -0.002 -0.002

    Vy 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 15

  • 8/10/2019 Hojas-calculo - Caballete

    17/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.297 m 0.595 m

    Vz 0.000 0.007 0.013Mt 0.000 0.000 0.000My 0.007 0.006 0.003Mz 0.000 0.000 0.000

    CM 1 N -0.095 -0.095 -0.095Vy 0.000 0.000 0.000Vz 0.825 0.825 0.825Mt 0.000 0.000 0.000My 0.565 0.319 0.074Mz 0.000 0.000 0.000

    Esfuerzos en barras, por hiptesisBarra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.165 m 0.330 m

    N17/N8 Peso propio N 0.003 0.003 0.003Vy 0.000 0.000 0.000Vz 0.005 0.008 0.012Mt 0.000 0.000 0.000My 0.003 0.002 0.000Mz 0.000 0.000 0.000

    CM 1 N 0.187 0.187 0.187Vy 0.000 0.000 0.000

    Vz 0.210 0.210 0.210Mt 0.000 0.000 0.000My 0.071 0.036 0.002Mz 0.000 0.000 0.000

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.188 m 0.376 m 0.564 m 0.751 mN16/N15 Peso propio N -0.013 -0.012 -0.011 -0.011 -0.010

    Vy 0.000 0.000 0.000 0.000 0.000Vz -0.001 -0.001 0.000 0.000 0.001

    Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.000 0.000 0.000 0.000 0.000

    CM 1 N -0.676 -0.676 -0.676 -0.676 -0.676Vy 0.000 0.000 0.000 0.000 0.000Vz -0.018 -0.018 -0.018 -0.018 -0.018Mt 0.000 0.000 0.000 0.000 0.000My -0.011 -0.007 -0.004 -0.001 0.003

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 16

  • 8/10/2019 Hojas-calculo - Caballete

    18/128

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.188 m 0.376 m 0.564 m 0.751 m

    Mz 0.000 0.000 0.000 0.000 0.000

    Esfuerzos en barras, por hiptesis

    Barra Hiptesis Esfuerzo Posiciones en la barra0.000 m 0.188 m 0.376 m 0.564 m 0.751 mN18/N17 Peso propio N -0.013 -0.012 -0.011 -0.011 -0.010

    Vy 0.000 0.000 0.000 0.000 0.000Vz -0.001 -0.001 0.000 0.000 0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.000 0.000 0.000Mz 0.000 0.000 0.000 0.000 0.000

    CM 1 N -0.676 -0.676 -0.676 -0.676 -0.676Vy 0.000 0.000 0.000 0.000 0.000Vz -0.018 -0.018 -0.018 -0.018 -0.018Mt 0.000 0.000 0.000 0.000 0.000My -0.011 -0.007 -0.004 -0.001 0.003Mz 0.000 0.000 0.000 0.000 0.000

    2 .2 .2 .1 .2 . - Co m b in ac io n es

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN3/N4 Acero laminado 1.4PP+1.4CM1 N -0.647 -0.644 -0.641 -0.638 -0.634

    Vy -0.067 -0.067 -0.067 -0.067 -0.067Vz -0.004 -0.003 -0.003 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002Mz 0.000 0.014 0.028 0.042 0.056

    1.2PP+1.2CM1 N -0.555 -0.552 -0.549 -0.547 -0.544Vy -0.058 -0.058 -0.058 -0.058 -0.058Vz -0.004 -0.003 -0.002 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002Mz 0.000 0.012 0.024 0.036 0.048

    0.9PP+0.9CM1 N -0.416 -0.414 -0.412 -0.410 -0.408Vy -0.043 -0.043 -0.043 -0.043 -0.043Vz -0.003 -0.002 -0.002 -0.001 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.001Mz 0.000 0.009 0.018 0.027 0.036

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 17

  • 8/10/2019 Hojas-calculo - Caballete

    19/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.159 m 0.317 m 0.476 m 0.635 m

    N4/N6 Acero laminado 1.4PP+1.4CM1 N -0.638 -0.636 -0.633 -0.631 -0.628Vy -0.067 -0.067 -0.067 -0.067 -0.067Vz 0.025 0.026 0.026 0.027 0.028Mt -0.008 -0.008 -0.008 -0.008 -0.008My 0.003 -0.001 -0.005 -0.010 -0.014Mz 0.054 0.065 0.075 0.086 0.097

    1.2PP+1.2CM1 N -0.547 -0.545 -0.543 -0.541 -0.539Vy -0.058 -0.058 -0.058 -0.058 -0.058Vz 0.022 0.022 0.023 0.023 0.024Mt -0.007 -0.007 -0.007 -0.007 -0.007My 0.002 -0.001 -0.005 -0.008 -0.012

    Mz 0.046 0.055 0.065 0.074 0.0830.9PP+0.9CM1 N -0.410 -0.409 -0.407 -0.406 -0.404Vy -0.043 -0.043 -0.043 -0.043 -0.043Vz 0.016 0.017 0.017 0.017 0.018Mt -0.005 -0.005 -0.005 -0.005 -0.005My 0.002 -0.001 -0.003 -0.006 -0.009Mz 0.035 0.042 0.048 0.055 0.062

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    N6/N1 Acero laminado 1.4PP+1.4CM1 N -0.178 -0.175 -0.172 -0.170 -0.167Vy 0.133 0.133 0.133 0.133 0.133Vz 0.033 0.033 0.034 0.035 0.035Mt 0.000 0.000 0.000 0.000 0.000My 0.016 0.010 0.004 -0.002 -0.008Mz 0.091 0.068 0.045 0.022 -0.001

    1.2PP+1.2CM1 N -0.152 -0.150 -0.148 -0.145 -0.143Vy 0.114 0.114 0.114 0.114 0.114Vz 0.028 0.028 0.029 0.030 0.030Mt 0.000 0.000 0.000 0.000 0.000My 0.014 0.009 0.004 -0.001 -0.007

    Mz 0.078 0.058 0.038 0.019 -0.0010.9PP+0.9CM1 N -0.114 -0.113 -0.111 -0.109 -0.107Vy 0.085 0.085 0.085 0.085 0.085Vz 0.021 0.021 0.022 0.022 0.023Mt 0.000 0.000 0.000 0.000 0.000My 0.010 0.006 0.003 -0.001 -0.005Mz 0.058 0.043 0.029 0.014 -0.001

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 18

  • 8/10/2019 Hojas-calculo - Caballete

    20/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    N2/N5 Acero laminado 1.4PP+1.4CM1 N -0.647 -0.644 -0.641 -0.638 -0.634Vy 0.067 0.067 0.067 0.067 0.067Vz -0.004 -0.003 -0.003 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002Mz 0.000 -0.014 -0.028 -0.042 -0.056

    1.2PP+1.2CM1 N -0.555 -0.552 -0.549 -0.547 -0.544Vy 0.058 0.058 0.058 0.058 0.058Vz -0.004 -0.003 -0.002 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002

    Mz 0.000 -0.012 -0.024 -0.036 -0.0480.9PP+0.9CM1 N -0.416 -0.414 -0.412 -0.410 -0.408Vy 0.043 0.043 0.043 0.043 0.043Vz -0.003 -0.002 -0.002 -0.001 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.001Mz 0.000 -0.009 -0.018 -0.027 -0.036

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.159 m 0.317 m 0.476 m 0.635 m

    N5/N7 Acero laminado 1.4PP+1.4CM1 N -0.638 -0.636 -0.633 -0.631 -0.628Vy 0.067 0.067 0.067 0.067 0.067Vz 0.025 0.026 0.026 0.027 0.028Mt 0.008 0.008 0.008 0.008 0.008My 0.003 -0.001 -0.005 -0.010 -0.014Mz -0.054 -0.065 -0.075 -0.086 -0.097

    1.2PP+1.2CM1 N -0.547 -0.545 -0.543 -0.541 -0.539Vy 0.058 0.058 0.058 0.058 0.058Vz 0.022 0.022 0.023 0.023 0.024Mt 0.007 0.007 0.007 0.007 0.007My 0.002 -0.001 -0.005 -0.008 -0.012

    Mz -0.046 -0.055 -0.065 -0.074 -0.0830.9PP+0.9CM1 N -0.410 -0.409 -0.407 -0.406 -0.404Vy 0.043 0.043 0.043 0.043 0.043Vz 0.016 0.017 0.017 0.017 0.018Mt 0.005 0.005 0.005 0.005 0.005My 0.002 -0.001 -0.003 -0.006 -0.009Mz -0.035 -0.042 -0.048 -0.055 -0.062

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 19

  • 8/10/2019 Hojas-calculo - Caballete

    21/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    N7/N1 Acero laminado 1.4PP+1.4CM1 N -0.178 -0.175 -0.172 -0.170 -0.167Vy -0.133 -0.133 -0.133 -0.133 -0.133Vz 0.033 0.033 0.034 0.035 0.035Mt 0.000 0.000 0.000 0.000 0.000My 0.016 0.010 0.004 -0.002 -0.008Mz -0.091 -0.068 -0.045 -0.022 0.001

    1.2PP+1.2CM1 N -0.152 -0.150 -0.148 -0.145 -0.143Vy -0.114 -0.114 -0.114 -0.114 -0.114Vz 0.028 0.028 0.029 0.030 0.030Mt 0.000 0.000 0.000 0.000 0.000My 0.014 0.009 0.004 -0.001 -0.007

    Mz -0.078 -0.058 -0.038 -0.019 0.0010.9PP+0.9CM1 N -0.114 -0.113 -0.111 -0.109 -0.107Vy -0.085 -0.085 -0.085 -0.085 -0.085Vz 0.021 0.021 0.022 0.022 0.023Mt 0.000 0.000 0.000 0.000 0.000My 0.010 0.006 0.003 -0.001 -0.005Mz -0.058 -0.043 -0.029 -0.014 0.001

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.294 m 0.588 m

    N4/N5 Acero laminado 1.4PP+1.4CM1 N 0.027 0.027 0.027Vy 0.000 0.000 0.000Vz -0.002 0.000 0.002Mt 0.000 0.000 0.000My -0.001 0.000 -0.001Mz 0.008 0.008 0.008

    1.2PP+1.2CM1 N 0.023 0.023 0.023Vy 0.000 0.000 0.000Vz -0.002 0.000 0.002Mt 0.000 0.000 0.000My -0.001 0.000 -0.001

    Mz 0.007 0.007 0.0070.9PP+0.9CM1 N 0.017 0.017 0.017Vy 0.000 0.000 0.000Vz -0.001 0.000 0.001Mt 0.000 0.000 0.000My 0.000 0.000 0.000Mz 0.005 0.005 0.005

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 20

  • 8/10/2019 Hojas-calculo - Caballete

    22/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.077 m 0.153 m

    N6/N16 Acero laminado 1.4PP+1.4CM1 N -0.095 -0.095 -0.095Vy -0.200 -0.200 -0.200Vz -0.441 -0.440 -0.439Mt -0.008 -0.008 -0.008My -0.030 0.004 0.038Mz -0.006 0.009 0.025

    1.2PP+1.2CM1 N -0.081 -0.081 -0.081Vy -0.172 -0.172 -0.172Vz -0.378 -0.377 -0.377Mt -0.007 -0.007 -0.007My -0.025 0.003 0.032

    Mz -0.005 0.008 0.0210.9PP+0.9CM1 N -0.061 -0.061 -0.061Vy -0.129 -0.129 -0.129Vz -0.283 -0.283 -0.282Mt -0.005 -0.005 -0.005My -0.019 0.003 0.024Mz -0.004 0.006 0.016

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.077 m 0.153 m

    N16/N7 Acero laminado 1.4PP+1.4CM1 N -0.095 -0.095 -0.095Vy 0.200 0.200 0.200Vz 0.439 0.440 0.441Mt 0.008 0.008 0.008My 0.038 0.004 -0.030Mz 0.025 0.009 -0.006

    1.2PP+1.2CM1 N -0.081 -0.081 -0.081Vy 0.172 0.172 0.172Vz 0.377 0.377 0.378Mt 0.007 0.007 0.007My 0.032 0.003 -0.025

    Mz 0.021 0.008 -0.0050.9PP+0.9CM1 N -0.061 -0.061 -0.061Vy 0.129 0.129 0.129Vz 0.282 0.283 0.283Mt 0.005 0.005 0.005My 0.024 0.003 -0.019Mz 0.016 0.006 -0.004

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 21

  • 8/10/2019 Hojas-calculo - Caballete

    23/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    N10/N11 Acero laminado 1.4PP+1.4CM1 N -0.647 -0.644 -0.641 -0.638 -0.634Vy 0.067 0.067 0.067 0.067 0.067Vz -0.004 -0.003 -0.003 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002Mz 0.000 -0.014 -0.028 -0.042 -0.056

    1.2PP+1.2CM1 N -0.555 -0.552 -0.549 -0.547 -0.544Vy 0.058 0.058 0.058 0.058 0.058Vz -0.004 -0.003 -0.002 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002

    Mz 0.000 -0.012 -0.024 -0.036 -0.0480.9PP+0.9CM1 N -0.416 -0.414 -0.412 -0.410 -0.408Vy 0.043 0.043 0.043 0.043 0.043Vz -0.003 -0.002 -0.002 -0.001 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.001Mz 0.000 -0.009 -0.018 -0.027 -0.036

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.159 m 0.317 m 0.476 m 0.635 m

    N11/N13 Acero laminado 1.4PP+1.4CM1 N -0.638 -0.636 -0.633 -0.631 -0.628Vy 0.067 0.067 0.067 0.067 0.067Vz 0.025 0.026 0.026 0.027 0.028Mt 0.008 0.008 0.008 0.008 0.008My 0.003 -0.001 -0.005 -0.010 -0.014Mz -0.054 -0.065 -0.075 -0.086 -0.097

    1.2PP+1.2CM1 N -0.547 -0.545 -0.543 -0.541 -0.539Vy 0.058 0.058 0.058 0.058 0.058Vz 0.022 0.022 0.023 0.023 0.024Mt 0.007 0.007 0.007 0.007 0.007My 0.002 -0.001 -0.005 -0.008 -0.012

    Mz -0.046 -0.055 -0.065 -0.074 -0.0830.9PP+0.9CM1 N -0.410 -0.409 -0.407 -0.406 -0.404Vy 0.043 0.043 0.043 0.043 0.043Vz 0.016 0.017 0.017 0.017 0.018Mt 0.005 0.005 0.005 0.005 0.005My 0.002 -0.001 -0.003 -0.006 -0.009Mz -0.035 -0.042 -0.048 -0.055 -0.062

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 22

  • 8/10/2019 Hojas-calculo - Caballete

    24/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    N13/N8 Acero laminado 1.4PP+1.4CM1 N -0.178 -0.175 -0.172 -0.170 -0.167Vy -0.133 -0.133 -0.133 -0.133 -0.133Vz 0.033 0.033 0.034 0.035 0.035Mt 0.000 0.000 0.000 0.000 0.000My 0.016 0.010 0.004 -0.002 -0.008Mz -0.091 -0.068 -0.045 -0.022 0.001

    1.2PP+1.2CM1 N -0.152 -0.150 -0.148 -0.145 -0.143Vy -0.114 -0.114 -0.114 -0.114 -0.114Vz 0.028 0.028 0.029 0.030 0.030Mt 0.000 0.000 0.000 0.000 0.000My 0.014 0.009 0.004 -0.001 -0.007

    Mz -0.078 -0.058 -0.038 -0.019 0.0010.9PP+0.9CM1 N -0.114 -0.113 -0.111 -0.109 -0.107Vy -0.085 -0.085 -0.085 -0.085 -0.085Vz 0.021 0.021 0.022 0.022 0.023Mt 0.000 0.000 0.000 0.000 0.000My 0.010 0.006 0.003 -0.001 -0.005Mz -0.058 -0.043 -0.029 -0.014 0.001

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    N9/N12 Acero laminado 1.4PP+1.4CM1 N -0.647 -0.644 -0.641 -0.638 -0.634Vy -0.067 -0.067 -0.067 -0.067 -0.067Vz -0.004 -0.003 -0.003 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002Mz 0.000 0.014 0.028 0.042 0.056

    1.2PP+1.2CM1 N -0.555 -0.552 -0.549 -0.547 -0.544Vy -0.058 -0.058 -0.058 -0.058 -0.058Vz -0.004 -0.003 -0.002 -0.002 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.001 0.001 0.002 0.002

    Mz 0.000 0.012 0.024 0.036 0.0480.9PP+0.9CM1 N -0.416 -0.414 -0.412 -0.410 -0.408Vy -0.043 -0.043 -0.043 -0.043 -0.043Vz -0.003 -0.002 -0.002 -0.001 -0.001Mt 0.000 0.000 0.000 0.000 0.000My 0.000 0.000 0.001 0.001 0.001Mz 0.000 0.009 0.018 0.027 0.036

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 23

  • 8/10/2019 Hojas-calculo - Caballete

    25/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.159 m 0.317 m 0.476 m 0.635 m

    N12/N14 Acero laminado 1.4PP+1.4CM1 N -0.638 -0.636 -0.633 -0.631 -0.628Vy -0.067 -0.067 -0.067 -0.067 -0.067Vz 0.025 0.026 0.026 0.027 0.028Mt -0.008 -0.008 -0.008 -0.008 -0.008My 0.003 -0.001 -0.005 -0.010 -0.014Mz 0.054 0.065 0.075 0.086 0.097

    1.2PP+1.2CM1 N -0.547 -0.545 -0.543 -0.541 -0.539Vy -0.058 -0.058 -0.058 -0.058 -0.058Vz 0.022 0.022 0.023 0.023 0.024Mt -0.007 -0.007 -0.007 -0.007 -0.007My 0.002 -0.001 -0.005 -0.008 -0.012

    Mz 0.046 0.055 0.065 0.074 0.0830.9PP+0.9CM1 N -0.410 -0.409 -0.407 -0.406 -0.404Vy -0.043 -0.043 -0.043 -0.043 -0.043Vz 0.016 0.017 0.017 0.017 0.018Mt -0.005 -0.005 -0.005 -0.005 -0.005My 0.002 -0.001 -0.003 -0.006 -0.009Mz 0.035 0.042 0.048 0.055 0.062

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    N14/N8 Acero laminado 1.4PP+1.4CM1 N -0.178 -0.175 -0.172 -0.170 -0.167Vy 0.133 0.133 0.133 0.133 0.133Vz 0.033 0.033 0.034 0.035 0.035Mt 0.000 0.000 0.000 0.000 0.000My 0.016 0.010 0.004 -0.002 -0.008Mz 0.091 0.068 0.045 0.022 -0.001

    1.2PP+1.2CM1 N -0.152 -0.150 -0.148 -0.145 -0.143Vy 0.114 0.114 0.114 0.114 0.114Vz 0.028 0.028 0.029 0.030 0.030Mt 0.000 0.000 0.000 0.000 0.000My 0.014 0.009 0.004 -0.001 -0.007

    Mz 0.078 0.058 0.038 0.019 -0.0010.9PP+0.9CM1 N -0.114 -0.113 -0.111 -0.109 -0.107Vy 0.085 0.085 0.085 0.085 0.085Vz 0.021 0.021 0.022 0.022 0.023Mt 0.000 0.000 0.000 0.000 0.000My 0.010 0.006 0.003 -0.001 -0.005Mz 0.058 0.043 0.029 0.014 -0.001

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 24

  • 8/10/2019 Hojas-calculo - Caballete

    26/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.077 m 0.153 m

    N13/N18 Acero laminado 1.4PP+1.4CM1 N -0.095 -0.095 -0.095Vy 0.200 0.200 0.200Vz -0.441 -0.440 -0.439Mt 0.008 0.008 0.008My -0.030 0.004 0.038Mz 0.006 -0.009 -0.025

    1.2PP+1.2CM1 N -0.081 -0.081 -0.081Vy 0.172 0.172 0.172Vz -0.378 -0.377 -0.377Mt 0.007 0.007 0.007My -0.025 0.003 0.032

    Mz 0.005 -0.008 -0.0210.9PP+0.9CM1 N -0.061 -0.061 -0.061Vy 0.129 0.129 0.129Vz -0.283 -0.283 -0.282Mt 0.005 0.005 0.005My -0.019 0.003 0.024Mz 0.004 -0.006 -0.016

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.077 m 0.153 m

    N18/N14 Acero laminado 1.4PP+1.4CM1 N -0.095 -0.095 -0.095Vy -0.200 -0.200 -0.200Vz 0.439 0.440 0.441Mt -0.008 -0.008 -0.008My 0.038 0.004 -0.030Mz -0.025 -0.009 0.006

    1.2PP+1.2CM1 N -0.081 -0.081 -0.081Vy -0.172 -0.172 -0.172Vz 0.377 0.377 0.378Mt -0.007 -0.007 -0.007My 0.032 0.003 -0.025

    Mz -0.021 -0.008 0.0050.9PP+0.9CM1 N -0.061 -0.061 -0.061Vy -0.129 -0.129 -0.129Vz 0.282 0.283 0.283Mt -0.005 -0.005 -0.005My 0.024 0.003 -0.019Mz -0.016 -0.006 0.004

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 25

  • 8/10/2019 Hojas-calculo - Caballete

    27/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.294 m 0.588 m

    N11/N12 Acero laminado 1.4PP+1.4CM1 N 0.027 0.027 0.027Vy 0.000 0.000 0.000Vz -0.002 0.000 0.002Mt 0.000 0.000 0.000My -0.001 0.000 -0.001Mz -0.008 -0.008 -0.008

    1.2PP+1.2CM1 N 0.023 0.023 0.023Vy 0.000 0.000 0.000Vz -0.002 0.000 0.002Mt 0.000 0.000 0.000My -0.001 0.000 -0.001

    Mz -0.007 -0.007 -0.0070.9PP+0.9CM1 N 0.017 0.017 0.017Vy 0.000 0.000 0.000Vz -0.001 0.000 0.001Mt 0.000 0.000 0.000My 0.000 0.000 0.000Mz -0.005 -0.005 -0.005

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.165 m 0.330 m

    N1/N15 Acero laminado 1.4PP+1.4CM1 N 0.266 0.266 0.266Vy 0.000 0.000 0.000Vz -0.310 -0.305 -0.300Mt 0.000 0.000 0.000My 0.003 0.053 0.103Mz 0.000 0.000 0.000

    1.2PP+1.2CM1 N 0.228 0.228 0.228Vy 0.000 0.000 0.000Vz -0.266 -0.262 -0.257Mt 0.000 0.000 0.000My 0.002 0.046 0.088

    Mz 0.000 0.000 0.0000.9PP+0.9CM1 N 0.171 0.171 0.171Vy 0.000 0.000 0.000Vz -0.199 -0.196 -0.193Mt 0.000 0.000 0.000My 0.002 0.034 0.066Mz 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 26

  • 8/10/2019 Hojas-calculo - Caballete

    28/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.297 m 0.595 m

    N15/N19 Acero laminado 1.4PP+1.4CM1 N -0.135 -0.135 -0.135Vy 0.000 0.000 0.000Vz -1.173 -1.164 -1.155Mt 0.000 0.000 0.000My 0.107 0.455 0.799Mz 0.000 0.000 0.000

    1.2PP+1.2CM1 N -0.115 -0.115 -0.115Vy 0.000 0.000 0.000Vz -1.006 -0.998 -0.990Mt 0.000 0.000 0.000My 0.092 0.390 0.685

    Mz 0.000 0.000 0.0000.9PP+0.9CM1 N -0.087 -0.087 -0.087Vy 0.000 0.000 0.000Vz -0.754 -0.748 -0.742Mt 0.000 0.000 0.000My 0.069 0.292 0.514Mz 0.000 0.000 0.000

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.297 m 0.595 m

    N19/N17 Acero laminado 1.4PP+1.4CM1 N -0.135 -0.135 -0.135Vy 0.000 0.000 0.000Vz 1.155 1.164 1.173Mt 0.000 0.000 0.000My 0.799 0.455 0.107Mz 0.000 0.000 0.000

    1.2PP+1.2CM1 N -0.115 -0.115 -0.115Vy 0.000 0.000 0.000Vz 0.990 0.998 1.006Mt 0.000 0.000 0.000My 0.685 0.390 0.092

    Mz 0.000 0.000 0.0000.9PP+0.9CM1 N -0.087 -0.087 -0.087Vy 0.000 0.000 0.000Vz 0.743 0.748 0.754Mt 0.000 0.000 0.000My 0.514 0.292 0.069Mz 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 27

  • 8/10/2019 Hojas-calculo - Caballete

    29/128

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.165 m 0.330 m

    N17/N8 Acero laminado 1.4PP+1.4CM1 N 0.266 0.266 0.266Vy 0.000 0.000 0.000Vz 0.300 0.305 0.310Mt 0.000 0.000 0.000My 0.103 0.053 0.003Mz 0.000 0.000 0.000

    1.2PP+1.2CM1 N 0.228 0.228 0.228Vy 0.000 0.000 0.000Vz 0.257 0.262 0.266Mt 0.000 0.000 0.000My 0.088 0.046 0.002

    Mz 0.000 0.000 0.0000.9PP+0.9CM1 N 0.171 0.171 0.171Vy 0.000 0.000 0.000Vz 0.193 0.196 0.199Mt 0.000 0.000 0.000My 0.066 0.034 0.002Mz 0.000 0.000 0.000

    Esfuerzos en barras, por combinacin

    Barra Combinacin Esfuerzo Posiciones en la barraTipo Descripcin 0.000 m 0.188 m 0.376 m 0.564 m 0.751 m

    N16/N15 Acero laminado 1.4PP+1.4CM1 N -0.965 -0.964 -0.963 -0.961 -0.960Vy 0.000 0.000 0.000 0.000 0.000Vz -0.026 -0.026 -0.025 -0.024 -0.024Mt 0.000 0.000 0.000 0.000 0.000My -0.015 -0.010 -0.006 -0.001 0.004Mz 0.000 0.000 0.000 0.000 0.000

    1.2PP+1.2CM1 N -0.827 -0.826 -0.825 -0.824 -0.823Vy 0.000 0.000 0.000 0.000 0.000Vz -0.023 -0.022 -0.021 -0.021 -0.020Mt 0.000 0.000 0.000 0.000 0.000My -0.013 -0.009 -0.005 -0.001 0.003

    Mz 0.000 0.000 0.000 0.000 0.0000.9PP+0.9CM1 N -0.621 -0.620 -0.619 -0.618 -0.617Vy 0.000 0.000 0.000 0.000 0.000Vz -0.017 -0.016 -0.016 -0.016 -0.015Mt 0.000 0.000 0.000 0.000 0.000My -0.010 -0.007 -0.004 -0.001 0.002Mz 0.000 0.000 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 28

  • 8/10/2019 Hojas-calculo - Caballete

    30/128

  • 8/10/2019 Hojas-calculo - Caballete

    31/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 m

    Vymn -0.067 -0.067 -0.067 -0.067 -0.067Vymx -0.043 -0.043 -0.043 -0.043 -0.043Vzmn 0.016 0.017 0.017 0.017 0.018Vzmx 0.025 0.026 0.026 0.027 0.028Mtmn -0.008 -0.008 -0.008 -0.008 -0.008Mtmx -0.005 -0.005 -0.005 -0.005 -0.005Mymn 0.002 -0.001 -0.005 -0.010 -0.014Mymx 0.003 -0.001 -0.003 -0.006 -0.009Mzmn 0.035 0.042 0.048 0.055 0.062Mzmx 0.054 0.065 0.075 0.086 0.097

    Envolventes de los esfuerzos en barrasBarra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN6/N1 Acero laminado Nmn -0.178 -0.175 -0.172 -0.170 -0.167

    Nmx -0.114 -0.113 -0.111 -0.109 -0.107Vymn 0.085 0.085 0.085 0.085 0.085Vymx 0.133 0.133 0.133 0.133 0.133Vzmn 0.021 0.021 0.022 0.022 0.023Vzmx 0.033 0.033 0.034 0.035 0.035Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000

    Mymn 0.010 0.006 0.003 -0.002 -0.008Mymx 0.016 0.010 0.004 -0.001 -0.005Mzmn 0.058 0.043 0.029 0.014 -0.001Mzmx 0.091 0.068 0.045 0.022 -0.001

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN2/N5 Acero laminado Nmn -0.647 -0.644 -0.641 -0.638 -0.634

    Nmx -0.416 -0.414 -0.412 -0.410 -0.408Vymn 0.043 0.043 0.043 0.043 0.043

    Vymx 0.067 0.067 0.067 0.067 0.067Vzmn -0.004 -0.003 -0.003 -0.002 -0.001Vzmx -0.003 -0.002 -0.002 -0.001 -0.001Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000Mymn 0.000 0.000 0.001 0.001 0.001Mymx 0.000 0.001 0.001 0.002 0.002Mzmn 0.000 -0.014 -0.028 -0.042 -0.056

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 30

  • 8/10/2019 Hojas-calculo - Caballete

    32/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    Mzmx 0.000 -0.009 -0.018 -0.027 -0.036

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN5/N7 Acero laminado Nmn -0.638 -0.636 -0.633 -0.631 -0.628

    Nmx -0.410 -0.409 -0.407 -0.406 -0.404Vymn 0.043 0.043 0.043 0.043 0.043Vymx 0.067 0.067 0.067 0.067 0.067Vzmn 0.016 0.017 0.017 0.017 0.018Vzmx 0.025 0.026 0.026 0.027 0.028

    Mtmn 0.005 0.005 0.005 0.005 0.005Mtmx 0.008 0.008 0.008 0.008 0.008Mymn 0.002 -0.001 -0.005 -0.010 -0.014Mymx 0.003 -0.001 -0.003 -0.006 -0.009Mzmn -0.054 -0.065 -0.075 -0.086 -0.097Mzmx -0.035 -0.042 -0.048 -0.055 -0.062

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN7/N1 Acero laminado Nmn -0.178 -0.175 -0.172 -0.170 -0.167

    Nmx -0.114 -0.113 -0.111 -0.109 -0.107Vymn -0.133 -0.133 -0.133 -0.133 -0.133Vymx -0.085 -0.085 -0.085 -0.085 -0.085Vzmn 0.021 0.021 0.022 0.022 0.023Vzmx 0.033 0.033 0.034 0.035 0.035Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000Mymn 0.010 0.006 0.003 -0.002 -0.008Mymx 0.016 0.010 0.004 -0.001 -0.005Mzmn -0.091 -0.068 -0.045 -0.022 0.001Mzmx -0.058 -0.043 -0.029 -0.014 0.001

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.294 m 0.588 mN4/N5 Acero laminado Nmn 0.017 0.017 0.017

    Nmx 0.027 0.027 0.027Vymn 0.000 0.000 0.000Vymx 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 31

  • 8/10/2019 Hojas-calculo - Caballete

    33/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.294 m 0.588 m

    Vzmn -0.002 0.000 0.001Vzmx -0.001 0.000 0.002Mtmn 0.000 0.000 0.000Mtmx 0.000 0.000 0.000Mymn -0.001 0.000 -0.001Mymx 0.000 0.000 0.000Mzmn 0.005 0.005 0.005Mzmx 0.008 0.008 0.008

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra

    0.000 m 0.077 m 0.153 mN6/N16 Acero laminado Nmn -0.095 -0.095 -0.095Nmx -0.061 -0.061 -0.061Vymn -0.200 -0.200 -0.200Vymx -0.129 -0.129 -0.129Vzmn -0.441 -0.440 -0.439Vzmx -0.283 -0.283 -0.282Mtmn -0.008 -0.008 -0.008Mtmx -0.005 -0.005 -0.005Mymn -0.030 0.003 0.024Mymx -0.019 0.004 0.038

    Mzmn -0.006 0.006 0.016Mzmx -0.004 0.009 0.025

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 mN16/N7 Acero laminado Nmn -0.095 -0.095 -0.095

    Nmx -0.061 -0.061 -0.061Vymn 0.129 0.129 0.129Vymx 0.200 0.200 0.200Vzmn 0.282 0.283 0.283

    Vzmx 0.439 0.440 0.441Mtmn 0.005 0.005 0.005Mtmx 0.008 0.008 0.008Mymn 0.024 0.003 -0.030Mymx 0.038 0.004 -0.019Mzmn 0.016 0.006 -0.006Mzmx 0.025 0.009 -0.004

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 32

  • 8/10/2019 Hojas-calculo - Caballete

    34/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 m

    N10/N11 Acero laminado Nmn -0.647 -0.644 -0.641 -0.638 -0.634Nmx -0.416 -0.414 -0.412 -0.410 -0.408Vymn 0.043 0.043 0.043 0.043 0.043Vymx 0.067 0.067 0.067 0.067 0.067Vzmn -0.004 -0.003 -0.003 -0.002 -0.001Vzmx -0.003 -0.002 -0.002 -0.001 -0.001Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000Mymn 0.000 0.000 0.001 0.001 0.001Mymx 0.000 0.001 0.001 0.002 0.002Mzmn 0.000 -0.014 -0.028 -0.042 -0.056

    Mzmx 0.000 -0.009 -0.018 -0.027 -0.036

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN11/N13 Acero laminado Nmn -0.638 -0.636 -0.633 -0.631 -0.628

    Nmx -0.410 -0.409 -0.407 -0.406 -0.404Vymn 0.043 0.043 0.043 0.043 0.043Vymx 0.067 0.067 0.067 0.067 0.067Vzmn 0.016 0.017 0.017 0.017 0.018Vzmx 0.025 0.026 0.026 0.027 0.028

    Mtmn 0.005 0.005 0.005 0.005 0.005Mtmx 0.008 0.008 0.008 0.008 0.008Mymn 0.002 -0.001 -0.005 -0.010 -0.014Mymx 0.003 -0.001 -0.003 -0.006 -0.009Mzmn -0.054 -0.065 -0.075 -0.086 -0.097Mzmx -0.035 -0.042 -0.048 -0.055 -0.062

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN13/N8 Acero laminado Nmn -0.178 -0.175 -0.172 -0.170 -0.167

    Nmx -0.114 -0.113 -0.111 -0.109 -0.107Vymn -0.133 -0.133 -0.133 -0.133 -0.133Vymx -0.085 -0.085 -0.085 -0.085 -0.085Vzmn 0.021 0.021 0.022 0.022 0.023Vzmx 0.033 0.033 0.034 0.035 0.035Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000Mymn 0.010 0.006 0.003 -0.002 -0.008

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 33

  • 8/10/2019 Hojas-calculo - Caballete

    35/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    Mymx 0.016 0.010 0.004 -0.001 -0.005Mzmn -0.091 -0.068 -0.045 -0.022 0.001Mzmx -0.058 -0.043 -0.029 -0.014 0.001

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.207 m 0.413 m 0.620 m 0.827 mN9/N12 Acero laminado Nmn -0.647 -0.644 -0.641 -0.638 -0.634

    Nmx -0.416 -0.414 -0.412 -0.410 -0.408Vymn -0.067 -0.067 -0.067 -0.067 -0.067Vymx -0.043 -0.043 -0.043 -0.043 -0.043

    Vzmn -0.004 -0.003 -0.003 -0.002 -0.001Vzmx -0.003 -0.002 -0.002 -0.001 -0.001Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000Mymn 0.000 0.000 0.001 0.001 0.001Mymx 0.000 0.001 0.001 0.002 0.002Mzmn 0.000 0.009 0.018 0.027 0.036Mzmx 0.000 0.014 0.028 0.042 0.056

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra

    0.000 m 0.159 m 0.317 m 0.476 m 0.635 mN12/N14 Acero laminado Nmn -0.638 -0.636 -0.633 -0.631 -0.628

    Nmx -0.410 -0.409 -0.407 -0.406 -0.404Vymn -0.067 -0.067 -0.067 -0.067 -0.067Vymx -0.043 -0.043 -0.043 -0.043 -0.043Vzmn 0.016 0.017 0.017 0.017 0.018Vzmx 0.025 0.026 0.026 0.027 0.028Mtmn -0.008 -0.008 -0.008 -0.008 -0.008Mtmx -0.005 -0.005 -0.005 -0.005 -0.005Mymn 0.002 -0.001 -0.005 -0.010 -0.014Mymx 0.003 -0.001 -0.003 -0.006 -0.009

    Mzmn 0.035 0.042 0.048 0.055 0.062Mzmx 0.054 0.065 0.075 0.086 0.097

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 mN14/N8 Acero laminado Nmn -0.178 -0.175 -0.172 -0.170 -0.167

    Nmx -0.114 -0.113 -0.111 -0.109 -0.107

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 34

  • 8/10/2019 Hojas-calculo - Caballete

    36/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.173 m 0.346 m 0.519 m 0.692 m

    Vymn 0.085 0.085 0.085 0.085 0.085Vymx 0.133 0.133 0.133 0.133 0.133Vzmn 0.021 0.021 0.022 0.022 0.023Vzmx 0.033 0.033 0.034 0.035 0.035Mtmn 0.000 0.000 0.000 0.000 0.000Mtmx 0.000 0.000 0.000 0.000 0.000Mymn 0.010 0.006 0.003 -0.002 -0.008Mymx 0.016 0.010 0.004 -0.001 -0.005Mzmn 0.058 0.043 0.029 0.014 -0.001Mzmx 0.091 0.068 0.045 0.022 -0.001

    Envolventes de los esfuerzos en barrasBarra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 m

    N13/N18 Acero laminado Nmn -0.095 -0.095 -0.095Nmx -0.061 -0.061 -0.061Vymn 0.129 0.129 0.129Vymx 0.200 0.200 0.200Vzmn -0.441 -0.440 -0.439Vzmx -0.283 -0.283 -0.282Mtmn 0.005 0.005 0.005Mtmx 0.008 0.008 0.008

    Mymn -0.030 0.003 0.024Mymx -0.019 0.004 0.038Mzmn 0.004 -0.009 -0.025Mzmx 0.006 -0.006 -0.016

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 mN18/N14 Acero laminado Nmn -0.095 -0.095 -0.095

    Nmx -0.061 -0.061 -0.061Vymn -0.200 -0.200 -0.200

    Vymx -0.129 -0.129 -0.129Vzmn 0.282 0.283 0.283Vzmx 0.439 0.440 0.441Mtmn -0.008 -0.008 -0.008Mtmx -0.005 -0.005 -0.005Mymn 0.024 0.003 -0.030Mymx 0.038 0.004 -0.019Mzmn -0.025 -0.009 0.004

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 35

  • 8/10/2019 Hojas-calculo - Caballete

    37/128

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.077 m 0.153 m

    Mzmx -0.016 -0.006 0.006

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.294 m 0.588 mN11/N12 Acero laminado Nmn 0.017 0.017 0.017

    Nmx 0.027 0.027 0.027Vymn 0.000 0.000 0.000Vymx 0.000 0.000 0.000Vzmn -0.002 0.000 0.001Vzmx -0.001 0.000 0.002

    Mtmn 0.000 0.000 0.000Mtmx 0.000 0.000 0.000Mymn -0.001 0.000 -0.001Mymx 0.000 0.000 0.000Mzmn -0.008 -0.008 -0.008Mzmx -0.005 -0.005 -0.005

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.165 m 0.330 mN1/N15 Acero laminado Nmn 0.171 0.171 0.171

    Nmx 0.266 0.266 0.266Vymn 0.000 0.000 0.000Vymx 0.000 0.000 0.000Vzmn -0.310 -0.305 -0.300Vzmx -0.199 -0.196 -0.193Mtmn 0.000 0.000 0.000Mtmx 0.000 0.000 0.000Mymn 0.002 0.034 0.066Mymx 0.003 0.053 0.103Mzmn 0.000 0.000 0.000Mzmx 0.000 0.000 0.000

    Envolventes de los esfuerzos en barras

    Barra Tipo de combinacin Esfuerzo Posiciones en la barra0.000 m 0.297 m 0.595 mN15/N19 Acero laminado Nmn -0.135 -0.135 -0.135

    Nmx -0.087 -0.087 -0.087Vymn 0.000 0.000 0.000Vymx 0.000 0.000 0.000

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 36

  • 8/10/2019 Hojas-calculo - Caballete

    38/128

  • 8/10/2019 Hojas-calculo - Caballete

    39/128

  • 8/10/2019 Hojas-calculo - Caballete

    40/128

    GS: Gravitatorias + sismoGVS: Gravitatorias + viento + sismo

    : Aprovechamiento de la resistencia. La barra cumple con las condiciones de resistencia de la norma si secumple que 100 %.

    Comprobacin de resistencia

    Barra (%)Posicin

    (m)

    Esfuerzos psimosOrigen EstadoN

    (t)Vy(t)

    Vz(t)

    Mt(tm)

    My(tm)

    Mz(tm)

    N3/N4 7.57 0.827 -0.634 -0.067 -0.001 0.000 0.002 0.056 G CumpleN4/N6 13.53 0.635 -0.628 -0.067 0.028 -0.008 -0.014 0.097 G CumpleN6/N1 12.35 0.000 -0.178 0.133 0.033 0.000 0.016 0.091 G CumpleN2/N5 7.57 0.827 -0.634 0.067 -0.001 0.000 0.002 -0.056 G CumpleN5/N7 13.53 0.635 -0.628 0.067 0.028 0.008 -0.014 -0.097 G CumpleN7/N1 12.35 0.000 -0.178 -0.133 0.033 0.000 0.016 -0.091 G CumpleN4/N5 3.10 0.000 0.027 0.000 -0.002 0.000 -0.001 0.008 G Cumple

    N6/N16 22.43 0.153 -0.095 -0.200 -0.439 -0.008 0.038 0.025 G CumpleN16/N7 22.43 0.000 -0.095 0.200 0.439 0.008 0.038 0.025 G Cumple

    N10/N11 7.57 0.827 -0.634 0.067 -0.001 0.000 0.002 -0.056 G CumpleN11/N13 13.53 0.635 -0.628 0.067 0.028 0.008 -0.014 -0.097 G CumpleN13/N8 12.35 0.000 -0.178 -0.133 0.033 0.000 0.016 -0.091 G CumpleN9/N12 7.57 0.827 -0.634 -0.067 -0.001 0.000 0.002 0.056 G Cumple

    N12/N14 13.53 0.635 -0.628 -0.067 0.028 -0.008 -0.014 0.097 G CumpleN14/N8 12.35 0.000 -0.178 0.133 0.033 0.000 0.016 0.091 G Cumple

    N13/N18 22.43 0.153 -0.095 0.200 -0.439 0.008 0.038 -0.025 G CumpleN18/N14 22.43 0.000 -0.095 -0.200 0.439 -0.008 0.038 -0.025 G CumpleN11/N12 3.10 0.000 0.027 0.000 -0.002 0.000 -0.001 -0.008 G CumpleN1/N15 3.98 0.330 0.266 0.000 -0.300 0.000 0.103 0.000 G Cumple

    N15/N19 29.32 0.595 -0.135 0.000 -1.155 0.000 0.799 0.000 G CumpleN19/N17 29.32 0.000 -0.135 0.000 1.155 0.000 0.799 0.000 G CumpleN17/N8 3.98 0.000 0.266 0.000 0.300 0.000 0.103 0.000 G Cumple

    N16/N15 8.68 0.000 -0.965 0.000 -0.026 0.000 -0.015 0.000 G CumpleN18/N17 8.68 0.000 -0.965 0.000 -0.026 0.000 -0.015 0.000 G Cumple

    2 .2 .2 .3 . - Fle ch as Referencias:

    Pos.: Valor de la coordenada sobre el eje 'X' local del grupo de flecha en el punto donde se produce elvalor psimo de la flecha.L.: Distancia entre dos puntos de corte consecutivos de la deformada con la recta que une los nudosextremos del grupo de flecha.

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 39

  • 8/10/2019 Hojas-calculo - Caballete

    41/128

    Flechas

    Grupo

    Flecha mxima absoluta xyFlecha mxima relativa xy

    Flecha mxima absoluta xzFlecha mxima relativa xz

    Flecha activa absoluta xyFlecha activa relativa xy

    Flecha activa absoluta xzFlecha activa relativa xz

    Pos.

    (m)

    Flecha

    (mm)

    Pos.

    (m)

    Flecha

    (mm)

    Pos.

    (m)

    Flecha

    (mm)

    Pos.

    (m)

    Flecha

    (mm)N3/N1 1.144 0.99 1.634 0.01 0.000 0.00 0.000 0.001.144 L/(>1000) 1.634 L/(>1000) - L/(>1000) - L/(>1000)

    N2/N1 1.144 0.99 1.634 0.01 0.000 0.00 0.000 0.001.144 L/(>1000) 1.634 L/(>1000) - L/(>1000) - L/(>1000)

    N4/N5 0.294 0.04 0.294 0.00 0.000 0.00 0.000 0.000.294 L/(>1000) 0.294 L/(>1000) - L/(>1000) - L/(>1000)

    N6/N7 0.153 0.03 0.153 0.03 0.000 0.00 0.000 0.000.153 L/(>1000) 0.153 L/(>1000) - L/(>1000) - L/(>1000)

    N10/N8 1.144 0.99 1.634 0.01 0.000 0.00 0.000 0.001.144 L/(>1000) 1.634 L/(>1000) - L/(>1000) - L/(>1000)

    N9/N8 1.144 0.99 1.634 0.01 0.000 0.00 0.000 0.001.144 L/(>1000) 1.634 L/(>1000) - L/(>1000) - L/(>1000)

    N13/N14 0.153 0.03 0.153 0.03 0.000 0.00 0.000 0.000.153 L/(>1000) 0.153 L/(>1000) - L/(>1000) - L/(>1000)

    N11/N12 0.294 0.04 0.294 0.00 0.000 0.00 0.000 0.000.294 L/(>1000) 0.294 L/(>1000) - L/(>1000) - L/(>1000)

    N1/N8 0.628 0.00 0.925 1.11 0.000 0.00 0.000 0.00- L/(>1000) 0.925 L/(>1000) - L/(>1000) - L/(>1000)

    N16/N15 0.376 0.00 0.376 0.05 0.000 0.00 0.000 0.00- L/(>1000) 0.376 L/(>1000) - L/(>1000) - L/(>1000)

    N18/N17 0.376 0.00 0.376 0.05 0.000 0.00 0.000 0.00- L/(>1000) 0.376 L/(>1000) - L/(>1000) - L/(>1000)

    2 .2 .2 .4 . - Co m p r o b ac io n es E.L.U . ( Com p let o) Nota: Se muestra el listado completo de comprobaciones realizadas para las 10 barras con mayor coeficientede aprovechamiento.

    Barra N19/N17Perfil: P127Material: Acero (A36)

    X

    Y

    Nudos Longitud(m)

    Caractersticas mecnicas

    Inicial Final rea(cm)Ix(1)

    (cm4)Iy(1)

    (cm4)It(2)

    (cm4)N19 N17 0.595 27.87 630.74 630.74 1261.47

    Notas:(1) Inercia respecto al eje indicado(2) Momento de inercia a torsin uniforme

    Pandeo Pandeo lateralPlano ZX Plano ZY Ala sup. Ala inf. 1.00 1.00 0.00 0.00LK 0.595 0.595 0.000 0.000Cb - 1.000

    Notacin:: Coeficiente de pandeoLK : Longitud de pandeo (m)C b: Factor de modificacin para el momento crtico

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 40

  • 8/10/2019 Hojas-calculo - Caballete

    42/128

    Resistencia a traccin (Chapter D)La comprobacin no procede, ya que no hay axil de traccin.

    Slenderness limitation for compression (Chapter E)The maximum allowable slenderness ratio for a member subject to axial compressionshall be*:

    : 1 3

    Donde:

    : Slenderness parameter

    : 13

    Donde:L: Length of member L : 1850 mmK: The effective length factor. K : 0r: Governing radius of gyration, taken as the least of r x and r y r : 4.76 cm

    Donde:

    rx : 4.76 cm

    ry : 4.76 cm

    Donde:I x: Moment of inertia about the X-axis I x : 630.74 cm4I y: Moment of inertia about the Y-axis I y : 630.74 cm4A: Total cross-sectional area of member. A : 27.87 cm

    Notas:*: Maximum allowable slenderness ratio is based on User's Note found in section E2.

    Resistencia a compresin (Chapter E)All members must comply with the LRFD scenarios outlined in Chapter E of ANSI/AISC 360-10 (LRFD).The member must then meet the following criteria:

    T : 0 .0 0 2

    El axil de compresin solicitante de clculo psimo P r se produce para lacombinacin de hiptesis 1.4PP+1.4CM1.Donde:

    Pr: The required compressive strength using LRFD load combinations Pr : 0.135 tPc: The design axial compressive strength Pc : 63.388 t

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 41

  • 8/10/2019 Hojas-calculo - Caballete

    43/128

    The design compressive strength of compression members shall bethe lower value obtained according to the limit states outlined in

    Chapter E.Donde:p: Resistance factor for compression, taken as: p : 0.90

    Pn: The nominal compressive strength, determined according toArticle E7-2-C: Pn : 70.431 t

    for members with slender elements (ANSI/AISC 360-10 (LRFD), Chapter E -E7-2-C).

    A: Gross area of member. A : 27.87 cmFcr: Flexural buckling stress, taken as: Fcr : 2527.38 kp/cm

    a) When:

    Donde:Fy: Specified minimum yield stress of steel member Fy : 2548.42 kp/cmi) for doubly symmetric members, F e is the lowest value of: Fe : 128641.59 kp/cm

    Fe :

    Donde:

    E: Modulus of elasticity of steel E : 2038735.98 kp/cmCw: Warping constant Cw : 0.00 cm6Kz: The effective length factor taken about theZ-axis Kz : 0.00L: Length of member L : 1850 mmG: Shear modulus of elasticity of steel G : 815494.39 kp/cmJ: Torsional constant J : 1261.47 cm4I x: Moment of inertia about the X-axis I x : 630.74 cm4I y: Moment of inertia about the Y-axis I y : 630.74 cm4

    Fe: Elastic critical buckling stress, taken as the least of: Fe : 128641.59 kp/cm

    Fex : 128641.59 kp/cm

    Fey : 128641.59 kp/cmDonde:

    E: Modulus of elasticity of steel E : 2038735.98 kp/cmK: The effective length factor. Kx : 0.32

    Ky : 0.32L: Length of member L : 1850 mm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 42

  • 8/10/2019 Hojas-calculo - Caballete

    44/128

  • 8/10/2019 Hojas-calculo - Caballete

    45/128

    Resistencia a flexin eje X (Chapter F)All members must comply with the LRFD scenarios outlined in Chapter F of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: M : 0 .2 9 2

    El momento flector solicitante de clculo psimo, M r, se produce en el nudo N19,para la combinacon de acciones 1.4PP+1.4CM1.Donde:

    Mr: The required flexural strength using LRFD load combinations Mr : 0.799 tmMc: The design flexural strength Mc : 2.737 tm

    The design flexural strength of members subjected to bending shall bethe lower value obtained according to the limit states outlined in ChapterF:Donde:

    b: The resistance factor for flexure b : 0.90Mn: The nominal flexural strength calculated with Article 8, Section 1 Mn : 3.041 tm

    1. Yielding Mn : 3.041 tm

    Donde:Fy: Specified minimum yield stress Fy : 2548.42 kp/cmZ: Plastic section modulus Z : 119.31 cm

    2. Flange local bucklinga) for compact sections, the limit state of flange local buckling does not apply

    Resistencia a flexin eje Y (Chapter F)La comprobacin no procede, ya que no hay momento flector.

    Resistencia a corte X (Chapter G)La comprobacin no procede, ya que no hay esfuerzo cortante.

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 44

  • 8/10/2019 Hojas-calculo - Caballete

    46/128

    Resistencia a corte Y (Chapter G)All members must comply with the LRFD scenarios outlined in Chapter G of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: V : 0 .0 0 6

    El esfuerzo cortante solicitante de clculo psimo V r se produce en el nudo N17,para la combinacin de hiptesis 1.4PP+1.4CM1.Donde:

    Vr: The required shear strength using LRFD load combinations Vr : 1.173 tVc: The design shear strength

    Vc : 209.553 tThe design shear strength shall be determined as follows:Donde:

    v: Resistance factor for shear v : 0.90Vn: is defined according to the provisions of Chapter G, asfollows:

    for round HSS members, the nominal shear strength shall be calculated asfollows (ANSI/AISC 360-10 (LRFD), Chapter G - G-6).

    Vn : 232.836 t

    Donde:Fcr: Critical stress, taken as the greatest of: Fcr : 17906.65 kp/cm

    Fcr : 17906.65 kp/cm

    Donde:E: Modulus of elasticity of steel E : 2038735.98 kp/cmLv: The distance from maximum to zero shear force,conservatively taken as the length of the beam Lv : 1850.00 mmD: Outside diameter D : 141.00 mmt: Design wall thickness, taken as 0.93 times the nominalthickness t : 6.14 mm

    Fcr : 14443.33 kp/cm

    Donde:E: Modulus of elasticity of steel E : 2038735.98 kp/cmD: Outside diameter D : 141.00 mmt: Design wall thickness, taken as 0.93 times the nominalthickness t : 6.14 mm

    A: Gross area of the HSS section, based on design wall tickness A : 26.01 cm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 45

  • 8/10/2019 Hojas-calculo - Caballete

    47/128

    Combined forces and torsion (Chapter H)The following criterion must be satisfied:

    : 0 .2 9 3

    Los esfuerzos solicitantes de clculo psimos se producen en el nudo N19, para lacombinacin de acciones 1.4PP+1.4CM1.Donde: 1: calculated with Article 1, Section 11. Doubly and singly symmetric members in flexure and compression

    b) For

    1 : 0.29

    Donde:Pr: Required axial compressive strength Pr : 0.135 tPc: The design axial compressive strength, determined according toChapter E Pc : 63.388 tMrx: Required flexural strength for strong axis bending Mrx : 0.799 tmMcx: Design flexural strength for strong axis bending, determinedaccording to Chapter F Mcx : 2.737 tmMry: Required flexural strength for weak axis bending Mry : 0.000 tmMcy: Design flexural strength for weak axis bending, determinedaccording to Chapter F Mcy : 2.737 tm

    2: calculated with Article 1, Section 33. Doubly symmetric members in single axis flexure and compression

    b) For the limit state of out-of-plane buckling

    2 : 0.09

    Donde:Pr: Required compressive strength Pr : 0.135 tPco: Design compressive strength out of the plane of bending determinedaccording to Chapter E Pco : 63.388 tMrx: Required flexural strength for strong axis bending Mrx : 0.799 tm

    Mcx: Design flexural strength for strong axis bending, determinedaccording to Chapter F Mcx : 2.737 tm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 46

  • 8/10/2019 Hojas-calculo - Caballete

    48/128

    Barra N15/N19Perfil: P127Material: Acero (A36)

    X

    Y

    NudosLongitud(m)

    Caractersticas mecnicas

    Inicial Final rea(cm)Ix(1)

    (cm4)Iy(1)

    (cm4)It(2)

    (cm4)N15 N19 0.595 27.87 630.74 630.74 1261.47

    Notas:(1) Inercia respecto al eje indicado(2) Momento de inercia a torsin uniforme

    Pandeo Pandeo lateralPlano ZX Plano ZY Ala sup. Ala inf.

    1.00 1.00 0.00 0.00LK 0.595 0.595 0.000 0.000Cb - 1.000

    Notacin:

    : Coeficiente de pandeoLK : Longitud de pandeo (m)C b: Factor de modificacin para el momento crtico

    Resistencia a traccin (Chapter D)La comprobacin no procede, ya que no hay axil de traccin.

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 47

  • 8/10/2019 Hojas-calculo - Caballete

    49/128

  • 8/10/2019 Hojas-calculo - Caballete

    50/128

    Donde:p: Resistance factor for compression, taken as: p : 0.90

    Pn: The nominal compressive strength, determined according toArticle E7-2-C: Pn : 70.431 t

    for members with slender elements (ANSI/AISC 360-10 (LRFD), Chapter E -E7-2-C).

    A: Gross area of member. A : 27.87 cmFcr: Flexural buckling stress, taken as: Fcr : 2527.38 kp/cm

    a) When:

    Donde:Fy: Specified minimum yield stress of steel member Fy : 2548.42 kp/cmi) for doubly symmetric members, F e is the lowest value of: Fe : 128641.59 kp/cm

    Fe :

    Donde:E: Modulus of elasticity of steel E : 2038735.98 kp/cmCw: Warping constant Cw : 0.00 cm6Kz: The effective length factor taken about theZ-axis Kz : 0.00L: Length of member L : 1850 mmG: Shear modulus of elasticity of steel G : 815494.39 kp/cmJ: Torsional constant J : 1261.47 cm4I x: Moment of inertia about the X-axis I x : 630.74 cm4I y: Moment of inertia about the Y-axis I y : 630.74 cm4

    Fe: Elastic critical buckling stress, taken as the least of: Fe : 128641.59 kp/cm

    Fex : 128641.59 kp/cm

    Fey : 128641.59 kp/cmDonde:

    E: Modulus of elasticity of steel E : 2038735.98 kp/cm

    K: The effective length factor. Kx : 0.32 Ky : 0.32L: Length of member L : 1850 mmr: Governing radius of gyration rx : 4.76 cm

    ry : 4.76 cm

    Donde:

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 49

  • 8/10/2019 Hojas-calculo - Caballete

    51/128

    I : Moment of inertia I x : 630.74 cm4 I y : 630.74 cm4

    A: Total cross-sectional area of member. A : 27.87 cm

    Q : 1.00

    2) for members composed of solely unstiffened elements: Qs : 1.00

    c) for axially-loaded circular sections:

    i) When:

    Qa : 1.00Donde:

    D: Outside diameter D : 141.00 mmt: Wall thickness t : 6.60 mmE: Modulus of elasticity of steel E : 2038735.98 kp/cmFy: Specified minimum yield stress of steel member Fy : 2548.42 kp/cm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 50

  • 8/10/2019 Hojas-calculo - Caballete

    52/128

    Resistencia a flexin eje X (Chapter F)All members must comply with the LRFD scenarios outlined in Chapter F of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: M : 0 .2 9 2

    El momento flector solicitante de clculo psimo, M r, se produce en el nudo N19,para la combinacon de acciones 1.4PP+1.4CM1.Donde:

    Mr: The required flexural strength using LRFD load combinations Mr : 0.799 tmMc: The design flexural strength Mc : 2.737 tm

    The design flexural strength of members subjected to bending shall bethe lower value obtained according to the limit states outlined in ChapterF:Donde:

    b: The resistance factor for flexure b : 0.90Mn: The nominal flexural strength calculated with Article 8, Section 1 Mn : 3.041 tm

    1. Yielding Mn : 3.041 tm

    Donde:Fy: Specified minimum yield stress Fy : 2548.42 kp/cmZ: Plastic section modulus Z : 119.31 cm

    2. Flange local bucklinga) for compact sections, the limit state of flange local buckling does not apply

    Resistencia a flexin eje Y (Chapter F)La comprobacin no procede, ya que no hay momento flector.

    Resistencia a corte X (Chapter G)La comprobacin no procede, ya que no hay esfuerzo cortante.

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 51

  • 8/10/2019 Hojas-calculo - Caballete

    53/128

    Resistencia a corte Y (Chapter G)All members must comply with the LRFD scenarios outlined in Chapter G of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: V : 0 .0 0 6

    El esfuerzo cortante solicitante de clculo psimo V r se produce en el nudo N15,para la combinacin de hiptesis 1.4PP+1.4CM1.Donde:

    Vr: The required shear strength using LRFD load combinations Vr : 1.173 tVc: The design shear strength

    Vc : 209.553 tThe design shear strength shall be determined as follows:Donde:

    v: Resistance factor for shear v : 0.90Vn: is defined according to the provisions of Chapter G, asfollows:

    for round HSS members, the nominal shear strength shall be calculated asfollows (ANSI/AISC 360-10 (LRFD), Chapter G - G-6).

    Vn : 232.836 t

    Donde:Fcr: Critical stress, taken as the greatest of: Fcr : 17906.65 kp/cm

    Fcr : 17906.65 kp/cm

    Donde:E: Modulus of elasticity of steel E : 2038735.98 kp/cmLv: The distance from maximum to zero shear force,conservatively taken as the length of the beam Lv : 1850.00 mmD: Outside diameter D : 141.00 mmt: Design wall thickness, taken as 0.93 times the nominalthickness t : 6.14 mm

    Fcr : 14443.33 kp/cm

    Donde:E: Modulus of elasticity of steel E : 2038735.98 kp/cmD: Outside diameter D : 141.00 mmt: Design wall thickness, taken as 0.93 times the nominalthickness t : 6.14 mm

    A: Gross area of the HSS section, based on design wall tickness A : 26.01 cm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 52

  • 8/10/2019 Hojas-calculo - Caballete

    54/128

    Combined forces and torsion (Chapter H)The following criterion must be satisfied:

    : 0 .2 9 3

    Los esfuerzos solicitantes de clculo psimos se producen en el nudo N19, para lacombinacin de acciones 1.4PP+1.4CM1.Donde: 1: calculated with Article 1, Section 11. Doubly and singly symmetric members in flexure and compression

    b) For

    1 : 0.29

    Donde:Pr: Required axial compressive strength Pr : 0.135 tPc: The design axial compressive strength, determined according toChapter E Pc : 63.388 tMrx: Required flexural strength for strong axis bending Mrx : 0.799 tmMcx: Design flexural strength for strong axis bending, determinedaccording to Chapter F Mcx : 2.737 tmMry: Required flexural strength for weak axis bending Mry : 0.000 tmMcy: Design flexural strength for weak axis bending, determinedaccording to Chapter F Mcy : 2.737 tm

    2: calculated with Article 1, Section 33. Doubly symmetric members in single axis flexure and compression

    b) For the limit state of out-of-plane buckling

    2 : 0.09

    Donde:Pr: Required compressive strength Pr : 0.135 tPco: Design compressive strength out of the plane of bending determinedaccording to Chapter E Pco : 63.388 tMrx: Required flexural strength for strong axis bending Mrx : 0.799 tm

    Mcx: Design flexural strength for strong axis bending, determinedaccording to Chapter F Mcx : 2.737 tm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 53

  • 8/10/2019 Hojas-calculo - Caballete

    55/128

    Barra N16/N7Perfil: P51Material: Acero (A36)

    X

    Y

    NudosLongitud(m)

    Caractersticas mecnicas

    Inicial Final rea(cm)Ix(1)

    (cm4)Iy(1)

    (cm4)It(2)

    (cm4)N16 N7 0.153 6.87 27.17 27.17 54.34

    Notas:(1) Inercia respecto al eje indicado(2) Momento de inercia a torsin uniforme

    Pandeo Pandeo lateralPlano ZX Plano ZY Ala sup. Ala inf.

    1.00 1.00 0.00 0.00LK 0.153 0.153 0.000 0.000Cb - 1.000

    Notacin:

    : Coeficiente de pandeoLK : Longitud de pandeo (m)C b: Factor de modificacin para el momento crtico

    Resistencia a traccin (Chapter D)La comprobacin no procede, ya que no hay axil de traccin.

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 54

  • 8/10/2019 Hojas-calculo - Caballete

    56/128

  • 8/10/2019 Hojas-calculo - Caballete

    57/128

    Donde:p: Resistance factor for compression, taken as: p : 0.90

    Pn: The nominal compressive strength, determined according toArticle E7-2-C: Pn : 17.461 t

    for members with slender elements (ANSI/AISC 360-10 (LRFD), Chapter E -E7-2-C).

    A: Gross area of member. A : 6.87 cmFcr: Flexural buckling stress, taken as: Fcr : 2540.40 kp/cm

    a) When:

    Donde:Fy: Specified minimum yield stress of steel member Fy : 2548.42 kp/cmi) for doubly symmetric members, F e is the lowest value of: Fe : 338364.33 kp/cm

    Fe :

    Donde:E: Modulus of elasticity of steel E : 2038735.98 kp/cmCw: Warping constant Cw : 0.00 cm6Kz: The effective length factor taken about theZ-axis Kz : 0.00L: Length of member L : 307 mmG: Shear modulus of elasticity of steel G : 815494.39 kp/cmJ: Torsional constant J : 54.34 cm4I x: Moment of inertia about the X-axis I x : 27.17 cm4I y: Moment of inertia about the Y-axis I y : 27.17 cm4

    Fe: Elastic critical buckling stress, taken as the least of: Fe : 338364.33 kp/cm

    Fex : 338364.33 kp/cm

    Fey : 338364.33 kp/cmDonde:

    E: Modulus of elasticity of steel E : 2038735.98 kp/cm

    K: The effective length factor. Kx : 0.50 Ky : 0.50L: Length of member L : 307 mmr: Governing radius of gyration rx : 1.99 cm

    ry : 1.99 cm

    Donde:

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 56

  • 8/10/2019 Hojas-calculo - Caballete

    58/128

    I : Moment of inertia I x : 27.17 cm4 I y : 27.17 cm4

    A: Total cross-sectional area of member. A : 6.87 cm

    Q : 1.00

    2) for members composed of solely unstiffened elements: Qs : 1.00

    c) for axially-loaded circular sections:

    i) When:

    Qa : 1.00Donde:

    D: Outside diameter D : 60.00 mmt: Wall thickness t : 3.90 mmE: Modulus of elasticity of steel E : 2038735.98 kp/cmFy: Specified minimum yield stress of steel member Fy : 2548.42 kp/cm

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 57

  • 8/10/2019 Hojas-calculo - Caballete

    59/128

    Resistencia a flexin eje X (Chapter F)All members must comply with the LRFD scenarios outlined in Chapter F of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: M : 0 .1 3 4

    El momento flector solicitante de clculo psimo, M r, se produce en el nudo N16,para la combinacon de acciones 1.4PP+1.4CM1.Donde:

    Mr: The required flexural strength using LRFD load combinations Mr : 0.038 tmMc: The design flexural strength Mc : 0.282 tm

    The design flexural strength of members subjected to bending shall bethe lower value obtained according to the limit states outlined in ChapterF:Donde:

    b: The resistance factor for flexure b : 0.90Mn: The nominal flexural strength calculated with Article 8, Section 1 Mn : 0.313 tm

    1. Yielding Mn : 0.313 tm

    Donde:Fy: Specified minimum yield stress Fy : 2548.42 kp/cmZ: Plastic section modulus Z : 12.29 cm

    2. Flange local bucklinga) for compact sections, the limit state of flange local buckling does not apply

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 58

  • 8/10/2019 Hojas-calculo - Caballete

    60/128

    Resistencia a flexin eje Y (Chapter F)All members must comply with the LRFD scenarios outlined in Chapter F of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: M : 0 .0 8 7

    El momento flector solicitante de clculo psimo, M r, se produce en el nudo N16,para la combinacon de acciones 1.4PP+1.4CM1.Donde:

    Mr: The required flexural strength using LRFD load combinations Mr : 0.025 tmMc: The design flexural strength Mc : 0.282 tm

    The design flexural strength of members subjected to bending shall bethe lower value obtained according to the limit states outlined in ChapterF:Donde:

    b: The resistance factor for flexure b : 0.90Mn: The nominal flexural strength calculated with Article 8, Section 1 Mn : 0.313 tm

    1. Yielding Mn : 0.313 tm

    Donde:Fy: Specified minimum yield stress Fy : 2548.42 kp/cmZ: Plastic section modulus Z : 12.29 cm

    2. Flange local bucklinga) for compact sections, the limit state of flange local buckling does not apply

    ListadosCaballete-1.5Ton Fecha: 27/12/13

    Pgina 59

  • 8/10/2019 Hojas-calculo - Caballete

    61/128

    Resistencia a corte X (Chapter G)All members must comply with the LRFD scenarios outlined in Chapter G of ANSI/AISC 360-10 (LRFD).

    The member must then meet the following criteria: V : 0 .0 0 2

    El esfuerzo cortante solicitante de clculo psimo V r se produce para lacombinacin de hiptesis 1.4PP+1.4CM1.Donde:

    Vr: The required shear strength using LRFD load combinations Vr : 0.200 tVc: The design shear strength

    Vc : 125.016 tThe design shear strength shall be determined as follows:Donde:

    v: Resistance factor for shear v : 0.90Vn: is defined according to the provisions of Chapter G, asfollows:

    for round HSS members, the nominal shear strength shall be calculated asfollows (ANSI/AISC 360-10 (LRFD), Chapter G - G-6).

    Vn : 138.907 t

    Donde:Fcr: Critical stress, taken as the greatest