equipo panasonic

7/25/2019 Equipo Panasonic

1/2

These operating instructions are applicable for modelsSC-AKX800, SC-AKX600 and SC-AKX400.

Unless otherwise indicated, illustrations in these operatinginstructions are of SC-AKX400.Your system and the illustrations can look differently.

Safety precautions

WARNING!

Unit To reduce the risk of fire, electric shock or product

damage, Do not expose this unit to rain, moisture, dripping or

splashing. Do not place objects filled with liquids, such as vases,

on this unit. Use only the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to

qualified service personnel. Do not let metal objects fall inside this unit.

CAUTION!

Unit To reduce the risk of fire, electric shock or product

damage, Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit iswell ventilated.

Do not obstruct this units ventilation openings withnewspapers, tablecloths, curtains, and similar items.

Do not place sources of naked flames, such as lightedcandles, on this unit.

This unit is intended for use in moderate climates. This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, pleaseincrease separation between this unit and the mobiletelephone.

This unit utilizes a laser. Use of controls or adjustments orperformance of procedures other than those specifiedherein may result in hazardous radiation exposure.

Set the unit up on an even surface away from directsunlight, high temperatures, high humidity, and excessivevibration.

AC power supply cord The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from thesocket outlet immediately.

Battery Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by themanufacturer.

When disposing of the batteries, please contact your localauthorities or dealer and ask for the corr ect method ofdisposal.

Do not heat or expose to flame. Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windowsclosed.

Do not break open or short-circuit the battery. Do not charge the alkaline or manganese battery. Do not use the battery if the cover has peeled off. Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

SC-AKX800 :

SC-AKX600 :

SC-AKX400 :

Indicate features applicable to SC-AKX800.



System SC-AKX800 SC-AKX600 SC-AKX400

Main unit SA-AKX800 SA-AKX600 SA-AKX400

Speakers SB-AKX800 SB-AKX800 SB-AKX400

Subwoofer SB-AKW800

For CentralAmerica andtheCaribbean

Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and(2)this device must accept any interference received,including interference that may cause undesiredoperation.

About Bluetooth

Frequency band This system uses the 2.4 GHz frequency band.

Certification This system conforms to the frequency restrictions and

has received certification based on frequency laws. Thus,a wireless permit is not necessary.

The actions below are punishable by law: Taking apart or modifying the main unit. Removing specification indications.

Restrictions of use Wireless transmission and/or usage with all Bluetooth

equipped devices is not guaranteed. All devices must conform to standards set by

BluetoothSIG, Inc. Depending on the specifications and settings of a device,

it can fail to connect or some operations can be different. This system supports Bluetoothsecurity features. But

depending on the operating environment and/or settings,this security is possibly not sufficient. Transmit datawirelessly to this system with caution.

This system cannot transmit data to a Bluetoothdevice.

Range of use Use this device at a maximum range of 10 m. The range can decrease depending on the environment,

obstacles or interference.

Interference from other devices This system may not function properly and troubles such

as noise and sound jumps may arise due to radio waveinterference if this unit is located too close to otherBluetoothdevices or the devices that use the 2.4GHzband.

This system may not function properly if radio waves froma nearby broadcasting station, etc. is too strong.

Intended usage This system is for normal, general use only. Do not use this system near an equipment or in an

environment that is sensitive to radio frequencyinterference (example: airports, hospitals, laboratories,etc.).

Licenses

Customer Service Directory

Supplied accessories

Check and identify the supplied accessories.

1 AC power supply cord

1 AM loop antenna

1 FM indoor antenna

1 Remote control

(N2QAYB001022)

1 Remote control battery

Specifications

Amplifier sectionRMS output power stereo mode

SC-AKX800

Front Hi 295 W per channel (3 ), 1 kHz, 30% THD

Front Lo 470 W per channel (2), 100 Hz, 30% THD

Subwoofer Ch470 W per channel (2 ), 100 Hz, 30% THD

SC-AKX600

Front Hi 340 W per channel (3 ), 1 kHz, 30% THD

Front Lo 460 W per channel (2), 100 Hz, 30% THD

SC-AKX400

Front Ch (both ch driven)300 W per channel (3 ), 1 kHz, 30% THD

Total RMS stereo mode power

SC-AKX800 2000 W

SC-AKX600 1600 W

SC-AKX400 600 W

Tuner, terminals sectionPreset memory FM 30 stations

AM 15 stationsFrequency modulation (FM)

Frequency range

For SouthAmerica 87.50 MHz to 108.00 MHz (50 kHz step)


87.5 MHz to 108.0 MHz (100 kHz step)87.9 MHz to 107.9 MHz (200 kHz step)

Antenna terminals 75 (unbalanced)

Amplitude modulation (AM)

Frequency range

For SouthAmerica 522 kHz to 1629 kHz (9 kHz step)520 kHz to 1630 kHz (10 kHz step)


520 kHz to 1710 kHz (10 kHz step)AUX 1

Audio input Pin jack (1 system)

AUX 2

Sensitivity 100 mV, 4.7 k

Disc sectionDisc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )MPEG-1 Layer 3

Pick up

Wavelength 790 nm (CD)

USB sectionUSB port

USB standard USB 2.0 full speed

Media file format support MP3 ( *.mp3)

U SB d ev ic e fi le s ys te m F AT 12 , FAT1 6, F AT 32

USB recording

Bit rate 128 kbps

USB re cor ding speed 1x, 3x (CD only)

Recording file format MP3 ( *.mp3)

Internal memory section

Memory

Memory size 2 GB

Media file format support MP3 ( *.mp3)

Memory recording

Bit rate 128 kbps

M em or y r ec or di ng sp ee d 1 x, 3x (C D o nl y)

Recording file format MP3 ( *.mp3)

BluetoothsectionVersion BluetoothVer. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP, SPP, OPP, FTP

Operating frequency 2.4 GHz band, FH-SS

Operation distance 10 m line of sight

Speaker sectionSB-AKX800

Speaker unit(s)

Super Woofer 20 cm cone type

Woofer 8 cm cone type

Tweeter 6 cm cone type

Impedance High 3 / Low 2

Dimensions (W x H x D) 300 mm x 401 mm x 292 mm

Mass 6.6 kg

SB-AKW800

Speaker unit(s)

Super Woofer 25 cm cone type

Impedance 2


Mass 8.3 kg

SB-AKX400

Speaker unit(s)

Woofer 20 cm cone type

Tweeter 6 cm cone type

Impedance 3


Mass 4.3 kg

GeneralPower supply

For SouthAmerica AC 220 V to 240 V, 50/60 Hz

For CentralAmerica andtheCaribbean AC 120 V, 60 Hz

Power consumption

SC-AKX800 SC-AKX600 173 W

SC-AKX400

For SouthAmerica 86 W

For CentralAmericaand theCaribbean 71 W

Dimensions (W x H x D)

SC-AKX800 SC-AKX600 348 mm x 192 mm x 303 mm

SC-AKX400 348 mm x 193 mm x 251 mm

Mass

SC-AKX800 SC-AKX600 3.6 kg

SC-AKX400 2.5 kg

Operating temperature range 0C to +40C

Operating humidity range35% to 80% RH (no condensation)

Recording and playback of content on this or any otherdevices may require permission from the owner of thecopyright or other such rights of that content. Panasonichas no authority to and does not grant you that p ermissionand explicitly disclaims any right, ability or intention toobtain such permission on your behalf. It is yourresponsibility to ensure that your use of this or any otherdevices complies with applicable copyright legislation inyour country. Please refer to that legislation for moreinformation on the relevant laws and regulations involvedor contact the owner of the rights of the content you wishto record or playback.

Panasonic bears no responsibility for data and/orinformation that can possibly be compromised during awireless transmission.

The Bluetoothword mark and logos are registeredtrademarks owned by Bluetooth SIG, Inc. and any use ofsuch marks by Panasonic Corporation is under license.Other trademarks and trade names are those of theirrespective owners.

Google Play and Android are trademarks of Google Inc.

MPEG Layer-3 audio coding technology licensed fromFraunhofer IIS and Thomson.

Obtain product information and operative assistant;localize the closer distributor or Service Center; buy spareparts and accessories by our web site to Latin Amer ican:http://www.lar.panasonic.com

Also you may contact us directly by our Contact Center:

P an am a 8 00 -P ANA ( 80 0- 72 62 )

Colombia 01-8000-94PANA (01-8000-947262)

Ecuador 1800-PANASONIC (1800-726276)

Costa Rica 800-PANA737 (800-7262737)

El Salvador 800-PANA (800-7262)

Guatemala 1-801-811-PANA (1-801-811-7262)

Chile 800-390-602From a cell phone: 797-5000

Venezuela 800-PANA-800 (800-7262-800)

Uruguay 0-800-PANA (0-800-7262)

P er u 0 -8 00 -0 0- PA N ( 0- 80 0- 00 72 6)

Argentina 0800-333-PANA (0800-333-7262)0810-321-PANA (0810-321-7262)

Paraguay 0800-11-PANA (0800-11-7262)

Dominican

Republic

809-200-8000

Operating Instructions

CD Stereo System

Model No.SC-AKX800

SC-AKX600

SC-AKX400

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

Panasonic CorporationWeb Site: http://panasonic.net

Panasonic Corporation 2015

PN

RQT9974-BL0115LC0

EnPS

This illustration shows SC-AKX400.

Note:

Specificationsaresubjectto changewithoutnotice.Massand dimensionsareapproximate.

Totalharmonic distortion ismeasuredby thedigitalspectrumanalyzer.

Troubleshooting

Before requesting service, make the following checks. If youare in doubt about some of the check points, or if thesolutions indicated do not solve the problem, consult yourdealer for instructions.

Common problemsThe unit does not work.

The safety devicehas been activated. Dothe following:1. Press [1]on themainunittoswitchtheunitto standby

mode.If theunitdoesnotswitchtostandbymode,

Pressandholdthe buttonfora minimumof 10seconds.

Or, DisconnecttheAC powersupplycord and thenconnectitagain.

2. Press [1]again to switch on the unit. Iftheproblempersists, consultyour dealer.

The display panel lights up and changes continuously instandby mode. Press andhold [8]on themainunittoselectDEMOOFF.

No operations can be done with the remote control. Examinethatthe battery is installedcorrectly.

Sound isdistorted orno sound. Adjustthevolume ofthe system. Switchoff thesystem,determine andcorrectthe cause,and

thenswitchonagain.Itcanbecausedbystrainingofthespeakers through excessivevolumeor power, andwhen usingthe systemin ahot environment.

A humming sound canbe heard during playback. An ACpower supply cordor fluorescentlightis near the

cables.Keepother appliancesandcords awayfrom thecablesof thissystem.

The sound level reduces. The protectioncircuithas beenactivateddueto the

continuoususeat high volumeoutput.Thisistoprotectthesystemand maintainthesound quality.

DiscDisplay notshown correctly.Playback doesnot start. You havenotputinthedisccorrectly.Putitincorrectly. Disc isdirty. Cleanthe disc. Replacethedisc ifit is scratched, warped, or non-standard. Thereiscondensation.Letthesystemdryfor1 to2 hours.

The total number of tracks displayed is incorrect.The disc cannot be read.Distorted sound is heard.

You putinadiscthatthesystemcannotplay.Changetoaplayabledisc.

You putinadiscthathasnotbeenfinalized.

USBTheUSB deviceorthe contentsinit cannotbe read.

The formatoftheUSBdeviceorthecontents in itarenotcompatiblewiththe system.

USB devices with storagecapacity ofmorethan 32 GB cannotwork in someconditions.

Slow operationof the USB device. Largecontentsize or largememory USB devicetakes longer

timetoread.

Bluetooth

Pairing cannot be done. Checkthe Bluetoothdevice condition. The deviceisout ofthe10m communicationrange.Movethe

devicenearerto thesystem.

Thedevicecannotbe connected. The pairingof thedevicewas unsuccessful.Do pairingagain. The pairingof thedevicehas beenreplaced.Do pairingagain. This systemmight beconnectedto adifferent device.

Disconnecttheother deviceandtry pairingthe deviceagain. The systemmayhaveaproblem.Switchoffthesystemand

thenswitchon again.

Thedeviceis connected butaudio cannotbe heard throughthe system. Forsome built-inBluetooth devices,youhavetosetthe

audiooutputto SC-AKX800, SC-AKX600orSC-AKX400manually. Readthe operatinginstructions ofthe devicefordetails.

Sound from the device is interrupted. The deviceisout ofthe10m communicationrange.Movethe

devicenearerto thesystem. Removeany obstaclebetweenthesystem andthe device. Other devices thatuse the2.4 GHz frequency band(wireless

router, microwaves, cordless phones, etc.)areinterfering.Movethe devicenearerto thesystem anddistance itfrom theother devices.

SelectMODE1 forstable communication.

RadioSound isdistorted. UseanoptionalFMoutdoorantenna.Theantennashouldbe

installedbya competenttechnician.

A beatsound isheard. Switch offtheTV or moveit away from thesystem. Movemobiletelephonesawayfromthesystemifthe

interferenceisapparent. WheninAMtunermode,selecttheB.PROOFsettingthat

providesthebest reception.

A low hum is heard during AM broadcasts. Movethe antennaawayfrom othercablesand cords.

Main unit displaysADJUSTCLOCK Theclockisnotset.Adjusttheclock.

ADJUSTTIMER Theplaytimerand/orrecordtimerisnot set.Adjusttheplay

timer and/or recordtimer.

ALBFULL Thenumber ofalbums hasexceeded thesupportedlimit.

AUTOOFF Thesystemhasnotbeenusedfor20 minutesandwillswitch

offwithinaminute.To cancel,pressanybutton.

CANTRECDEVICEFULL Youcannot dorecording becausetheremaining recording

timeoftheUSBdeviceislessthanthetotaltimeof themusicsource. Changetoa USB device which has enough recordingtimeanddotherecordingagain.

ERROR Anincorrectoperationwas done.Readthe instructionsandtry

again.

ERROR (during recording) Youcannot selectotherplayback source (example:radio,

USB etc.) or press [2] or [6]during recording. Stoptherecordingfunction.

Youcannotopenthedisctraywhenrecordingfroman AMsource.

F61 Examineand correct thespeakercords connection. DisconnecttheUSB device.Switchoff thesystem andthen

switch on again.

F70 Examinethe Bluetoothconnection. DisconnecttheBluetooth device.Switchoff the systemand

then switch on again.

F76 Thereis aproblem with thepower supply. DisconnecttheAC power supply cordand consultyour

dealer.

F77

DisconnecttheAC power supply cordand consultyourdealer.

NODEVICE TheUSB deviceis not connected.Examinetheconnection. You cannotdorecording or check available storagespace

becausethereis no USBdeviceconnected to USBB .

NODISC

Youhavenotput ina disc.

NOPLAYUNSUPPORT Examinethe content.Youcan onlyplay supportedformat. Thefiles in the USB device can becorrupted. FormattheUSB

deviceandtry again. Thesystemmay haveaproblem.Switchoff thesystemand

then switch on again.

NOTRACK Thereis no album or track in theUSB deviceor the internal

memory.

PLAYERROR

AnunsupportedMP3 filehas beenplayed.The system willskipthattrackandplaythenextone.

RECERROR Youdisconnectedthe USBdeviceduring recording.Connect

theUSB deviceand dorecordingagain. An error occurredduringUSB recording. Disconnectthe USB

deviceandthen connectit again.

REMOTE1REMOTE2 Theremotecontrolandthemainunitareusingdifferent

codes.Changethe codeof theremote control. WhenREMOTE1isshown,pressandhold[OK]and [1]

foraminimum of 4seconds. WhenREMOTE2isshown,pressandhold[OK]and [2]

foraminimum of 4seconds.

TEMPNG Thetemperatureprotectioncircuithas beenactivated,andthe

system will switch off. Let the unit cool down before switchingitonagain.

Checkthattheventilationopeningoftheunitis notobstructed.

Ensurethis unitis wellventilated.

TRKFULL

Thenumber offiles hasexceededthe supportedlimit.

USBOVERCURRENTERROR TheUSB deviceis usingtoo much power. Disconnectthe

USB device, switch offthesystem andthen switch on again.

VBR Thesystemcannotshowtheremainingplaytimeforvariable

bitrate (VBR)tracks.

Remote control code

When other Panasonic equipment responds to the remotecontrol of this system, change the remote control code forthis system.

PreparationPress [CD/RADIO/AUX] to select AUX1 or AUX 2.

To set the code to REMOTE 2

1 Press and hold [CD/RADIO/AUX] on the main unitand [2] on the remote control until REMOTE2 isshown.

2 Press and hold [OK] and [2] f or a minimum of4seconds.

To set the code to REMOTE 1

1 Press and hold [CD/RADIO/AUX] on the main unitand [1] on the remote control until REMOTE1 isshown.

2 Press and hold [OK] and [1] f or a minimum of4seconds.

System memory reset

Reset the memory when the following situations occur: There is no response when buttons are pressed. You want to clear and reset the memory contents.

1 Disconnect the AC power supply cord.

2 While you press and hold [1] on the main unit,connect the AC power supply cord again.Continue to press and hold the button until is shown.

3 Release [1].

All the settings are set back to the factory preset.It is necessary to set the memory items again.

Power consumption in standby mode (approximate)

For SouthAmerica

SC-AKX800 SC-AKX600 0.4 W

SC-AKX400 0.5 W

For CentralAmerica andtheCaribbean 0.3 W

Power consumption in standby mode (approximate)(With BLUETOOTHSTANDBY set to ON)

For SouthAmerica 0.6 W

For CentralAmerica andtheCaribbean 0.4 W

Note on disc This system can play CD-R/RW with CD-DA or MP3

format content. Before playback, finalize the disc on the device it was

recorded on. Some CD-R/RW cannot be played because of the

condition of the recording.

Note on USB device This system does not guarantee connection with all USB

devices. This system supports USB 2.0 full speed. This system can support USB devices of up to 32 GB. Only FAT 12/16/32 file system is supported.

Note on MP3 file Files are defined as tracks and folders are defined as

albums. Tracks must have the extension .mp3 or .MP3. Tracks will not necessarily be played in the order you

recorded them. Some files can fail to work because of the sector size.

MP3 file on disc This system can access up to:

255 albums (including root folder) 999 tracks 20 sessions

Disc must conform to ISO9660 level 1 or 2 (except forextended formats).

MP3 file on USB device This system can access up to:

800 albums (including root folder) 8000 tracks 999 tracks in one album

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and ) align with thosein the remote control.

Placement of speakers

SC-AKX800

Front speakersPut the speakers so that the tweeter is on the outside.

SubwooferPut on the floor or a sturdy shelf to reduce vibration.

SC-AKX600

Put the speakers so that the tweeter is on the outside.

SC-AKX400

The left and right speakers are the same.You cannot remove the net of the speakers.

Use only the supplied speakers.You can cause damage to the system and decrease thesound quality if you use other speakers.

Note:

Keepyourspeakersmorethan 10mmfrom themainunitforventilation.

Putthe speakers on aflatsafe surface. Thesespeakersdonothavemagneticshielding.Donotput

themnearTVs,PCsorotherequipmenteasilyinfluencedbymagnetism.

Whenyou playathighlevelsfora longperiod,itcancausedamagetothespeakersanddecreasethelifeofthespeakers.

Decreasethevolume inthese conditionstoprevent damage: Whenthe soundis distorted. Whenyou adjustthesound quality.

Maintenance

To clean this system, wipe with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this

system. Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Making the connections

Connect the AC power supply cord only after all theother connections have been made.

SC-AKX800 SC-AKX600

SC-AKX400

1 Connect the AM loop antenna.Stand the antenna up on its base until it clicks.

2 Connect the FM indoor antenna.Put the antenna where reception is best.

3 Connect the speakers.Connect the speaker cables to the terminals of the samecolor.SC-AKX400

4 Connect the AC power supply cord.

Do not use an AC power supply cord from otherequipment.

Conserving powerThe system consumes a small amount of power evenwhen it is in standby mode. Disconnect the powersupply if you do not use the system.Some settings will be lost after you disconnect thesystem. You have to set them again.

CAUTION! Use the speakers only with the recommended

system. If not, you can cause damage to theamplifier and speakers and can cause a fire. Consultan approved service personnel if damage occurs orif there is a sudden apparent change in performance.

Do the procedures included in these instructionswhen you attach the speakers.

Do not touch the speaker cones reverberatingsurfaces: This may damage the speaker cone. The speaker cone may be hot.

Tweeter

Tweeter

Adhesive tape(not supplied)

To householdAC outlet

7/25/2019 Equipo Panasonic

2/2

Overview of controls

Do the procedures with the remote control. You can alsouse the buttons on the main unit if they are the s ame.

A Standby/on switch[`],[1]Press to switch the unit from on to standby mode or viceversa. In standby mode, the unit is still consuming asmall amount of power.

B View the content information

C Numeric buttonsTo select a 2-digit numberExample: 16: [ 10]=[1]=[6]

D Auto preset the radio station

E Select the audio sourceOn the main unit:

To startBluetoothpairing, pressand hold[ PAIRING].

F Basic playback control

G Select the sound effects

H Select the illumination effects

I View the setup menu

J Recording operation control

K Open or close the disc tray

L Decrease the brightness of the display panel

To cancel, press the button again.

M Set the sleep timer

N Adjust the volume level

O Mute the sound

To cancel, press the button again.MUTE is also canceled when you adj ust the volume orwhen you switch off the system.

P Select MP3 album or track

Q Select DJ jukebox

R Select or confirm the option

S View the play menu

T Remote control sensor

Distance: Within approximately 7 mAngle: Approximately 20 up and down, 30 left and right

U Select MP3 album or trackPress [ALBUM/TRACK] to select album or track.Browse tracks or albumsTurn [MULTICONTROL] to browse.To start playback from the selection, press [4/9].Select the illumination effectsPress and hold [ILLUMINATION] and then turn[MULTICONTROL] to select the setting.

V USBA

U SB po rt ( )USB status indicatorPlay MP3 tracks.

W USBB

U SB po rt ( )USB status indicatorPlay MP3 tracks.Record sound or music tracks.

X AUX IN 2 jack

Y Display panel

Z Disc tray

a Select the DJ functions

Preparing media

Disc

1 Press [CDx] (main unit: [x OPEN/CLOSE]) to open

the disc tray.Put in a disc with the labe l facing up.Press again to close the disc tray.

2 Press [CD/RADIO/AUX] to select CD.

USB

PreparationBefore you connect a USB device to the system, make sureyou do a backup of the data.

1 Decrease the volume and connect the USB device tothe USB port.Hold the main unit when connecting or disconnectingthe USB device.

2 Press [USB] (main unit: [MEMORY/USB]) to selectUSBA or USBB.USB status indicator lights up in red when selected.

Note:

Donot usea USB extension cable. Thesystem cannotrecognizeUSBdeviceconnectedthrough acable.

Bluetooth

You can connect and play an audio device wirelesslythrough Bluetooth.

Preparation Switch on the Bluetoothfeature of the device and put the

device near the system. Read the operating instructions of the device for details.

Pairing a devicePreparationIf this system is connected to a Bluetoothdevice,disconnect it (ZDisconnecting a device).

1 Press [ ].If PAIRING is shown, continue with step 4.

2 Press [PLAYMENU] to select PAIRING.

3 Press [Y, U] to select OK?YES and then press[OK].PAIRING is shown.To cancel, select OK?NO.

4 Select SC-AKX800, SC-AKX600 or SC-AKX400from the Bluetoothmenu of the device.If prompted for a passkey, input 0000.The device connects with this system automatically afterpairing is complete.The name of the connected device is shown for a fewseconds.

Using the main unit

1 Press and hold [ PAIRING] until PAIRING is

shown.

2 Select SC-AKX800, SC-AKX600 or SC-AKX400from the Bluetoothmenu of the device.

Note:

Youcanpairupto8 deviceswiththissystem.Ifa 9thdevice ispaired, thedevicethat has notbeen usedfor thelongesttime willbereplaced.

Connecting a devicePreparationIf this system is connected to a Bluetoothdevice,disconnect it (ZDisconnecting a device).

1 Press [ ].BLUETOOTHREADY is shown.

2 Select SC-AKX800, SC-AKX600 or SC-AKX400from the Bluetoothmenu of the device.The name of the connected device is shown for a fewseconds.

3 Start playback on the device.

Note:

Adevice mustbe pairedto connect. Thissystemcanonlyconnecttoonedeviceata time. WhenBLUETOOTHis selectedasthe source,this system

willautomaticallytry toconnect tothe lastconnecteddevice.

Disconnecting a device

1 Press [ ].

2 Press [PLAYMENU] to select DISCONNECT?.

3 Press [Y, U] to select OK?YES and then press[OK].BLUETOOTHREADY is shown.To cancel, select OK?NO.

Using the main unit

Press and hold [ PAIRING] until PAIRING is shown.

Note:

Adevice isdisconnectedwhen you: Selecta differentsource. Movethedeviceoutofthemaximumrange. Disablethe Bluetoothtransmission ofthedevice. Switch offthesystem or the device.

Media playback

The following marks indicate the availability of the feature.

Basic playback

CD USB BLUETOOTH MEMORY

Note:

Dependingonthe Bluetoothdevice,someoperations maynotwork.

Viewing available information

CD USB BLUETOOTH MEMORY

You can view the available information, such as MP3 albumand track number, on the display panel.

Press [DISPLAY].

Note:

Maximum charactersthatcan beshown: Approximately32 Thissystem supportsver.1.0, 1.1and 2.3 ID3tags. Textdatathatthesystemdoesnotsupportcan show

differently.

Play menuCD USB MEMORY

1 Press [PLAYMENU].

2 Press [Y, U] to select the setting and then press[OK].

Note:

Duringrandom playback,youcannot skipto trackswhichhavebeen played.

Thesetting iscanceledwhen you openthe disctray.

Link mode

BLUETOOTH

You can change the link mode to suit the connection type.

PreparationIf this system is connected to a Bluetoothdevice,disconnect it (ZDisconnecting a device).

1 Press [PLAYMENU] to select LINKMODE.

2 Press [Y, U] to select the mode and then press [OK].

Note:

SelectMODE1 ifthe soundis interrupted.

Radio

PreparationPress [CD/RADIO/AUX] to select FM or AM.

Manual tuning

Press [3] or [5] to tune in to the station.To tune automatically, press and hold the button until thefrequency starts changing quickly.ST is shown when a stereo broadcast is being received.

Using the main unit

1 Press [TUNEMODE] to select MANUAL.

2 Press [2/3] or [5/6] to tune in to thestation.

Memory presetting

You can preset up to 30 FM and 15 AM stations.

Automatic presetting

1 Press [AUTOPRESET] to select LOWEST orCURRENT.

2 Press [OK] to start presetting.

The tuner presets all the stations it can receive into thechannels in ascending order.To cancel, press [8].

Manual presetting

1 Press [3] or [5] (main unit: [2/3] or[5/6]) to tune in to the station.

2 Press [OK].PGM is shown.

3 Press the numeric buttons to select a preset number.Do steps 1 through 3 again to preset more stations.The new station replaces any station that occupies thesame preset number.

Selecting a preset stationPress the numeric buttons, [2] or [6] to select thepreset station.

Using the main unit

1 Press [TUNEMODE] to select PRESET.

2 Press [2/3] or [5/6] to select the presetstation.

Improving the sound quality

When FM is selected

1 Press [PLAYMENU] to select FMMODE.

2 Press [Y, U] to select MONO and then press [OK].To cancel, select STEREO.MONO is also canceled when you change the

frequency.To memorize the settingContinue with step 2 of Manual presetting.

When AM is selected

1 Press [PLAYMENU] to select B.PROOF.

2 Press [Y, U] to select the setting that provides thebest reception and then press [OK].

AM/FM allocation setting

By main unit only

ForSouthAmerica

This system can also receive AM broadcasts allocated in10kHz steps.

ForCentralAmericaand theCaribbean

This system can also receive FM broadcasts allocated in0.2MHz steps.

1 Press [CD/RADIO/AUX] to select FM or AM.

2 Press and hold [CD/RADIO/AUX].

After a few seconds, the display panel shows the currentminimum radio frequency. Release the button when theminimum frequency changes. To go back to the initial setting, do the above steps again. Preset frequencies are erased after you change the

setting.

Recording

This system can record up to 800 folders (maximum 999tracks in an album) or a total of 8000 tracks, depending on

the available storage capacity of the internal memory or theUSB device in USBB .

To check storage space

In the stop mode, press [DISPLAY]. UPDATE is shown when the system is reading the

device. NODEVICE is shown if there is no USB device

connected to USBB .

Note:

Allrecordingsare in.mp3 format. Youcannot dorecording when youare usingrandom

playbackmode. TheDJ function is switched offduringrecording. Repeat playbackmode is canceledduringrecording. Anew albumis addedeachtime youdo arecording. Thesequenceof albummay changeafterthe recording. Therecordingsare keptin afolder namedREC_DATAin the

USBdeviceor theinternalmemory. USB status indicator blinks in redduring USB recording.

CD :

USB :

BLUETOOTH :MEMORY:

CD-R/RW in CD-DA format or with MP3 files.

USB device with MP3 files.

Bluetoothdevice.

2 GB internal memory (refer to Recording foradding tracks to the internal memory).

P la y P re ss [4/9].

S to p P re ss [8].

USB MEMORY

The position is memorized.RESUME is shown.Press again to stop fully.

Pau se Pre ss [4/9].Press again to continue playback.

S ki p P re ss [2] or [6] (main unit: [2/3] or[5/6]) to skip track.CD USB MEMORY

Press [R,T] to skip MP3 album.

Search Press and hold [3] or [5](main unit: [2/3] or [5/6]).

OFFPLAYMODE Cancel the setting.

1-TRACK1-TR

Play one selected track.Press the numeric buttons to selectthe track.

1-ALBUM1-ALB

Play one selected MP3 album.Press [R, T] to select the MP3 album.

RANDOMRND

Play all tracks randomly.

1-ALBUMRANDOM1-ALBRND

Play all tracks in one selected MP3album randomly.Press [R, T] to select the MP3 album.

ALLREPEAT Repeat all tracks.

1-TRACKREPEAT1-TR

Repeat 1-TRACK.

1-ALBUMREPEAT1-ALB

Repeat 1-ALBUM.

RANDOMREPEATRND

Repeat random playback.

1-ALBUMRANDOMREPEAT

1-ALBRND

Repeat 1-ALBUMRANDOM.

M ODE 1 E mp ha si s o n c on ne ct iv it y.

M ODE 2 E mp ha si s o n s ou nd q ua li ty .

LOWEST Tuning begins from the lowest frequency.

CURRENT Tuning begins from the current frequency.

Basic recording

1 Select the source you want to record.

CD-DAPrepare the disc playback mode.

Make sure the disc is stopped.

RadioTune in to the radio station.

External equipmentConnect and play the equipment(ZExternal equipment).

2 Press [MEMORYREC7/9] or [USBREC7/9] to

start recording.The name of the folder that keeps the recording i sshown.

Note:

Wait for afew seconds for thesystem topreparethe USBdevicebeforeyou startrecording.

When thenext track ofthe discis beingrecorded, itwill beshown onthedisplay.

High-speed recordingCD-DA disc recording speed:CD, CD-R: Three times (3x) the normal speed.CD-RW: Two times (2x) the normal speed.

1 Put in the disc you want to record.

2 Press [RECMODE] to select NORMAL orHI-SPEED and then press [OK].

3 Press [USBREC7/9] or [MEMORYREC 7/9] tostart recording.

Note:

Ifyou cannotrecordathigh-speedbecauseof thecondition ofthe disc,recordat normalspeed.

The soundis muted duringhigh-speed recording.

Adding track marksWhen recording from radio or external equipment, you candivide tracks using various modes.

Before recordingPress [RECMODE] to select the mode.

Note:

Duringrecording, ifyou press [OK] or pauserecordingwhileusingTIME MARKmode,the 5-minutecounteris reset.

You cannotaddtrack marksmanually inSYNCHROmode.

Recording MP3 tracks

You can record MP3 tracks from:

MP3 disc to USBB or internal memory

USBAto USBB or internal memory

USBB to internal memory or vice versa

1 Prepare the source you want to record.

2 Press [MEMORYREC7/9] or [USBREC7/9] tostart recording.

Note:

Sometracks can usea longer timetorecord. Sometracks cannotberecorded becauseof theconditionofthe source.

Whenrecordingfroman MP3disc,therecordedfilenameisdifferentfrom theoriginal file.

Whenrecordingfrom USBA,therecordedfilenameisthesameas theoriginal file(maximum 32 characters).

Deleting the recorded tracks

1 MEMORY

Press [MEMORY] (main unit: [MEMORY/USB]) toselect MEMORY.

USBB

Press [USB] (main unit: [MEMORY/USB]) to selectUSBB.

2 Press [R,T] to select the album.

3 Press [2] or [6] to select the track.

4 Press [EDITMODE] to select the mode.

5 Press [OK].The selected item to be deleted is shown.

6 Press [OK].SURE?NO is shown.

7 Press [Y, U] to select SURE? YES and then press[OK].WRITING is shown.To cancel, select SURE?NO.

Sound and illumination effects

Sound effects

Preset EQ

1 Press [EQ] (main unit: [LATINEQ]) to selectPRESETEQ.

2 Press [R,T] to select the desired preset EQ settingand then press [OK].Or turn [MULTICONTROL] to select the desired presetEQ setting.

Manual EQ

1 Press [EQ] (main unit: [LATINEQ]) to selectMANUALEQ.

2 Press [R,T] to select the sound effect.Or turn [MULTICONTROL] to select the sound effect.

3 Press [Y, U] to select the setting and then press[OK].Or press [2/3] or [5/6] to select the setting.

D.Bass

1 Press [D.BASS] to select D.BASSLEVEL or

D.BASSBEAT.To cancel, select OFFD.BASS.

2 Press [R,T] to select the setting and then press[OK].Or turn [MULTICONTROL] to select the setting.

Illumination effects

You can change the illumination effect on the system.Press [ILLUMINATION] to select the desired effect.

You can also press [R,T]to select the next or previouseffect.

Using the main unit

1 Press and hold [ILLUMINATION].

2 Turn [MULTICONTROL] to select the setting.

DJ functions

You can use the DJ functions to add sound effect or samplesound between songs.

Note:

TheDJ function is switchedoff when you switch offthesystem,changeto another sourceor duringrecording.

DJ jukebox

USB MEMORY

Press [JUKEBOX] to select ON JUKEBOX.To cancel, select OFFJUKEBOX.

Using the main unit

Press [DJ JUKEBOX/SAMPLER] to selectONJUKEBOX.To cancel, select OFF.

Changing the repeat setting

1 Press [PLAYMENU].


Using the main unit

In the stop mode, turn [MULTICONTROL] to select thesetting.

Record al l t racks Select OFFPLAYMODE(ZPlay menu).

Record a specifiedtrack

Select 1-TRACK(ZPlay menu).

Stop recording Press [8]. WRITING is shown.

Pause recording Press [MEMORYREC 7/9] or[USBREC7/9] during recording.Press again to continue recording.

Note:

You can pauseduring recordingfrom theradio, AUX 1 or AUX 2 (except inSYNCHROmode).Atrack markis addedeverytimeyou pause(ZAddingtrack

marks).

M AN UAL Add a t r ac k ma rk m an ua ll y.Press [OK] during recording to add atrack mark.

SYNCHRO(For AUX 1 orAUX 2 source)

Recording starts automatically when theother equipment starts to play.Recording pauses when it detectssilence for 3 seconds.

TIMEMARK A track is automatically divided at5-minute intervals.

Record al l t racks Select OFFPLAYMODE(ZPlay menu).

Record a specifiedalbum or track

Select 1-ALBUM or1-TRACK (ZPlay menu).

Stop recording Press [8].Recording stops at the last fully recordedtrack in the album. For example, if youstop recording during the fourth track,only the first three tracks are recorded.NOFILE RECORDED is shown if notrack is recorded.

TRKDEL Delete a s ingle t rack.

ALBDEL Delete one album (maximum 999 tracks).

FORMAT Format the USB device.

ALLDEL Delete all albums in the internal memory.

COLOR Illuminate in one color.

AUTO Illuminate in one color. The color changesautomatically.

O FF C an ce l t he e ff ec t.

Using the Panasonic MAX Juke appYou can download and install the free Android appPanasonic MAX Juke on Google Play for additionalfeatures, such as to request song playback from multipledevices simultaneously.

RANDOMREPEATRND

Repeat random playback.

ALLTITLE REPEAT Repeat all tracks.

RANDOMMIX REPEATRND

Repeat random playback.Sample sound is added to theintervals of all tracks.

Changing the DJ jukebox effect

1 Press [JUKEBOX] (main unit:[DJJUKEBOX/SAMPLER]) to select ONJUKEBOX.

2 Press [Y, U] to select the effect and then press [OK].

Or press [2/3] or [5/6] on the main unit toselect the effect.

Note:

YoucannotselecttheDJjukeboxeffectwhenyouareusingRANDOMMIXREPEAT mode.

DJ sampler(Except for AUX 1 and AUX 2 source)

By main unit only

By turning [MULTICONTROL], you can apply a scratchsound or sample sound to the track you are playing.

1 Press [DJ JUKEBOX/SAMPLER] to selectONSAMPLER.

2 Press [2/3] or [5/6] to select the desiredsound.

3 Turn [MULTICONTROL].

To cancel DJ sampler

Press [DJ JUKEBOX/SAMPLER] to select OFF.

Clock and timers

Setting the clock

For SouthAmerica

This is a 24-hour clock.For CentralAmerica andtheCaribbean

This is a 12-hour clock.

1 Press [SETUP] to select CLOCK.

2 Press [Y, U] to set the time and then press [OK].

To check the time

Press [SETUP] to select CLOCK and then press [OK].In standby mode, press [DISPLAY].

Note:

Resetthe clock regularly tomaintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.

Press [SLEEP] to select the setting (in minutes).SLEEP is shown.To cancel, select OFF.

To check the remaining time

Press [SLEEP].

Note:

Theplaytimerandsleeptimerortherecordtimerandsleeptimercan beused together.

Thesleep timer always comes first. Besurenot toset anoverlapof timers.

Play timer and record timer(Except for Bluetooth, AUX 1 and AUX 2 source)

You can set the timer to come on at a certain time to: Wake you up (play timer). Record from the radio (record timer).Play timer and record timer cannot be used together.

PreparationSet the clock.

1 Press [SETUP] to select TIMERADJ.

2 Press [Y, U] to select #PLAY or #REC and thenpress [OK].

3 Press [Y, U] to set the start time and then press [OK].

4 Do step 3 again to set the end time.

5 Press [Y, U] to select the s ource you want to play orrecord and then press [OK].

6 For record timer, press [Y, U] to select MEMORY orUSBB to keep the recording and then press [OK].

To start the timer

1 Prepare the source.

2 Press [SETUP] to select TIMERSET.


The system must be switched off for the timer tooperate.

To check the setting

1 Press [SETUP] to select TIMERADJ.

2 Press [Y, U] to select #PLAY or #REC and thenpress [OK].

In standby mode, press [DISPLAY] two times.

Note:

Theplay timer starts atalow volume andincreases graduallytothepresetlevel.

Therecord timer starts 30 seconds beforethe settime withthevolume muted.

Thetimercomeson atthesettimeeverydayifthetimeris on. Ifyou switch off thesystem andthen switch on again whilea

timerisinoperation,thetimerwillnotstopattheendtime.

External equipment

Preparation Disconnect the AC power supply cord. Switch off all equipment and read the appropriate

operating instructions.

Note:

Componentsandcables aresold separately.

Using the auxiliary input

You can connect a VCR, DVD player etc. and listen to theaudio through this system.

1 Connect the external equipment.

2 Press [CD/RADIO/AUX] to select AUX1.

3 Play the external equipment.

Note:

Ifyou wantto connectequipmentotherthan thosedescribed,refer tothe audiodealer.

Sound distortioncanoccur whenyou usean adapter.

Connecting a portable audio equipment

You can play music from a portable audio equipment.

Preparation Switch off the equalizer (if any) of the portable audio

equipment to prevent sound distortion. Decrease the volume of the system and the portable

audio equipment before you connect or disconnect theportable audio equipment.

1 Connect the portable audio equipment.Plug type: 3.5 mm stereo

2 Press [CD/RADIO/AUX] to select AUX2.

3 Play the portable audio equipment.

To adjust the input level

1 Press [PLAYMENU] to select INPUTLEVEL.

2 Press [Y, U] to select NORMAL or HIGH and thenpress [OK].

Note:

Youcannot adjusttheinput levelduring recording. SelectNORMALif thesound isdistortedduring HIGH

input level. Readthe operatinginstructionsof theportableaudio

equipmentfor details.

Others

Auto off

This system automatically switches off when you do not useit for approximately 20 minutes.

1 Press [SETUP] to select AUTOOFF.

2 Press [Y, U] to select ON and then press [OK].AUTOOFF is shown.

To cancel, select OFF.

Note:

This function does notwork when you arein radio sourceorwhen aBluetoothdeviceisconnected.

Bluetoothstandby

This function automatically switches on the system whenyou establish a Bluetooth connection from a paired device.

1 Press [SETUP] to select BLUETOOTHSTANDBY.

2 Press [Y, U] to select ON and then press [OK].To cancel, select OFF.

Note:

Somedevicesmaytakelongertorespond.If youareconnectedtoa Bluetoothdevicebeforeswitching offthesystem, waitfor aminimumof5 secondsbeforeconnectingtothissystemfromyour Bluetoothdeviceagain.

Software version

You can check the software version of the system.

1 Press [SETUP] to select SW VER. and then press[OK].The software version is shown.

2 Press [OK] again to exit.

Play timer Prepare the source you want to listen to(disc, USB, internal memory or radio) andset the volume.

Record timer Connect the USB device to USBB (forUSB recording) and tune in to the radiostation.

PLAYON Start the play t imer. #PLAY is shown.

PLAYOFF Cancel the play timer.

RECON Start the record timer. #REC is shown.

RECOFF Cancel the record t imer.

Rear panel of this main unit

Rear panel of this main unit

Audio cable(not supplied)


DVD player(not supplied)


Portable audio equipment(not supplied)

equipo panasonic

Documents