Formato para Investigador

INVESTIGACIÓN Información detallada (2014-2018)

Proyecto de investigación externo (Se refiere a Proyectos CONACYT, FOMIX, Sectoriales y aquellos que cumplen con reglas de operación de Fondos CONACYT o Fondos Mixtos

Desarrollo de nano-compuesto polimérico en master batch a base de nanopartículas metálicas y cerámicas con propiedades antibacterianas para su uso en enseres domésticos , No. Proyecto: 20310, CONACYT PEI, NANOTECNOLOGIA, investigación DESARROLLO, CONCLUIDO (2014)

Multiferroicos No. Proyecto: 30059 CONACYT, NANOTECNOLOGIA, investigación BASICA, CONCLUIDO (2015)

Nanomultiferroicos No. Proyecto: 102171CONACYT Ciencia Básica, NANOTECNOLOGIA, investigación BASICA, CONCLUIDO (2016)

Escalamiento a nivel pre-industrial para la producción de nanocarbonato de calcio funcionalizado, con aplicación en sistemas de Poliolefinas/Nano-CaCO3 para mejora de propiedades fisicomecánicas  No. Proyecto: 20388, NANOMATERIALES, NANOTECNOLOGIA, investigación APLICADA, CONCLUIDO. (2017)

Desarrollo de un aditivo nanoestructurado de bajo costo con características hidrófobas para su aplicación en empaques y embalajes a base de derivados de celulosa y su escalamiento a nivel pre-industrial No. Proyecto: 20440, Poryecto PEI conacyt 242354, NANOTECNOLOGIA, investigación DESARROLLO, CONCLUIDO. (2017)

INVESTIGACIÓN Información detallada (2014-2018)

Reporte final de proyecto de investigación externo (sólo responsable)

Desarrollo de nano-compuesto polimérico en master batch a base de nanopartículas metálicas y cerámicas con propiedades antibacterianas para su uso en enseres domésticos , No. Proyecto: 20310, CONACYT PEI, NANOTECNOLOGIA, investigación DESARROLLO, CONCLUIDO. (2014)

Escalamiento a nivel pre-industrial para la producción de nanocarbonato de calcio funcionalizado, con aplicación en sistemas de Poliolefinas/Nano-CaCO3 para mejora de propiedades fisicomecánicas  No. Proyecto: 20388, NANOMATERIALES, NANOTECNOLOGIA, investigación APLICADA, CONCLUIDO. (2017)

Desarrollo de un aditivo nanoestructurado de bajo costo con características hidrófobas para su aplicación en empaques y embalajes a base de derivados de celulosa y su escalamiento a nivel pre-industrial No. Proyecto: 20440, Poryecto PEI conacyt 242354, NANOTECNOLOGIA, investigación DESARROLLO, CONCLUIDO.(2017)

Participación en proyectos de investigación con otras instituciones

1Colaboración de proyecto titulado Partículas multiferroicas y Aleaciones de alta entropía con UTSA.

2.- Colaboración de proyecto con la Universidad del Paso Texas (UTEP) médiate el proyecto titulado "Estudio depropiedades Multiferroicas y ópticas en cerámicos funcionales"

3.- Proyecto: CM-FQ-UJED-011 síntesis de partículas biogénicas a partir de variedad de pino endémicas del estado de Durango.

4.-Proyecto PROMEP DSA/103.5/16/10379. Ziolitas nanoestructuradas para la producción de hidrógeno empleando bentonita como materia prima.

5.- Proyecto de Investigación CONACYT CB-241622 Caracterización de las propiedades morfológicas, estructurales y nanomecánicas en materiales nanoestructurados.

Estancia de investigación en otras instituciones con reporte final aprobado

Estancia de Investigación (Año Sabático) En el departamento de Física y Astronomía de la Universidad de San Antonio Texas (UTSA) http://www.utsa.edu/physics/bajo la tutoría del Dr. Miguel José Yacamán, (2016-2017) Temas de Investigación;Materiales MultiferroicosY Aleaciones de Al 7570.

INVESTIGACIÓN Información detallada (2014-2018)

Artículo publicado en revista de cobertura internacional con arbitraje incluida en Citation Index o en el Padrón de Revistas CONACYT.

1. Multiferroic and Optical Properties of La0.05Li0.85NbO3 and LiNbO3 Nanocrystals, Carlos A. Díaz-Moreno, Jorge A. López, Yu Ding, A. Hurtado Macias, Chunqiang Li, and Ryan B. Wicker, Journal of Nanotechnology, Vol 2018.

2. Synthesis, characterization, and toxicity of hollow gold nanoshells, Sayma Adriana Rodriguez-Montelongo, Jesus Gonzalez-Hernandez, Abel Hurtado Macias, Ana Sonia Silva-Ramirez & Claudia G. Castillo Martin del Campo, Jose Manuel Gutierrez-Hernandez, Facundo Ruiz, Omar Gonzalez-Ortega. J Nanopart Res (2018) 20: 311.

3. A Direct Observation of Ordered Structures Induced by Cu Segregation at Grain Boundaries of Al 7075 Alloys, Prakash Parajuli, Ruben Mendoza-Cruz, Abel Hurtado-Macias, Ulises Santiago,and Miguel Jose Yacamán. Phys. Status Solidi A 180024 (2018).

4. Optical properties of ferroelectric lanthanum lithium niobate Carlos A. Diaz-Moreno, Yu Dingb , J. Portelles, J. Heiras, A. Hurtado Macias, A. Syeed, A. Paez, C. Lib , Jorge López, Ryan Wicker. Ceramics International 44 4727–4733 (2018).

5. Titanium butoxide molar ratio effect in the TiO2 nanoparticles size and methylene blue degradation, A. Castro-Beltrána, P.A. Luque , H.E. Garrafa-Gálvez, R.A. Vargas-Ortiz, A. Hurtado-Macías , A. Olivas, J.L. Almaral-Sánchez a, C.G. Alvarado-Beltrán, Optik 157 890–894 (2018).

6. Zn dopant effect on growth, morphology, texture and mechanical properties of SnO2 thin films, F. Paraguay-Delgado, A. Hurtado-Macías, O. Solís-Canto, Superficies y Vacío 31(1) 16-25, March 2018.

7. Nanomechanical properties of zirconia- yttria and alumina zirconia- yttria biomedical ceramics, subjected to low temperature aging, M.C. Aragon-Duarte, H.E. Esparza-Ponce, R.P. Talamantes, J. Mendez-Nonell, M.J. Yacamán, Alfredo Nevárez, Martina Margarita Nevárez Rascón, C. Ornelas, J. González-Hernández and Abel Hurtado-Macias. Ceramics International 43(5). (2017).

8. Relaxor ferroelectricity, ferromagnetic and Optical Second Harmonic properties in lanthanum lithium niobate (La 0.05 Li 0.85 NbO 3 ) nanoparticles, Carlos A. Díaz-Moreno, Chunqiang Li, J. Heiras, Rurik Farias, M.J. Yacamán, Yu Ding, Jorge Portelles, Abel Hurtado-Macias, J. González-Hernández and Jorge Lopez. Journal of Magnetism and Magnetic Materials 433. (2017).

INVESTIGACIÓN Información detallada (2014-2018)

9. Mechanical properties of RF-sputtering MoS2 thin films, Manuel Ramos, Manuela Ortíz-Díaz, Claudia Rodriguez, Carlos Ornelas, John Nogan, Jose Luis Enriquez, Jose Mireles Jr and Abel Hurtado-Macias. (2017).

10. Kinetics and statistical analysis of nickel leaching from spent catalyst in nitric acid solution, Juan Ramos Cano, Gregorio González-Zamarripa and A. Hurtado Macías, International of Mineral Processing 148. (2016).

11. Magnetocapacitance effect in ferroelectric LiNbO3 Nanoparticles, Jorge Lopez, Miguel J. Yacamán, Abel Hurtado-Macias. Journal of Magnetism and Magnetic, Vol 407 (2016) pp 291-298.

12. Nano-Mechanical and Structural study of WO3 thin films, Jose Luis Enriquez, Manuel Ramos, Jose Mireles, A. Hurtado-Macias., Thin Solid Film 606. (2016).

13. Evaluación de las Propiedades Mecánicas de Aluminuros de Hierro por la Técnica de Nanoindentación, Engelbert Huape, Ariosto Medina, L. Béjar Gomez and Abel Hurtado Macías. (2016).

14. Low loss Electron Energy Spectroscopy Characterization of Electronic Structure and Piezo-response of Ba0.9Ca0.1Ti0.9Zr0.1O3 Nanocrystals, Guillermo Manuel Herrera Pérez, Damasio Morales Cruz, Francisco Paraguay-Delgado, R. Borja-Urby, A. Reyes-Rojas, G. Tapia-Padilla, Luis Fuentes-Cobas and Abel Hurtado-Macías., Microscopy and Microanalysis (2016).

15. Effect of volumen fraction on mechanical propierties of Zr/ZrN multilayer systems, S. Payán-Díaz, R. Talamantes-Soto, Wilo Cruz, G.A. Hirata and Abel Hurtado-Macias. (2016).

16. “Nanomechanical properties of dehydrated enamel surface after bleaching treatment”, Abel Hurtado-Macías, Alfredo Nevarez-Rascon, Santiago González-López, Martina M. Nevarez-Rascon, Víctor A. Ríos-Barrera and Jesús González-Hernández International Journal of Innovative Science, Engineering & Technology, Vol. 2 Issue 8, August 2015 658-663.

17. Effect of Silver Nanoparticles in a Hydroxyapatite Coating applied by Atmospheric Plasma Spray., V. Orozco Carmona, C. Martínez Pérez, Renata de Lima, Leonardo Fernandes Fraceto, J. Romero García, A. Ledezma Pérez, Swen Marke. C. Rodríguez González. Abel Hurtado Macías and A. Martínez-Villafañe. International Journal of Electrochemical Science (2014), 9, 7471-7494.

18. “Structural aspects LiNbO3 nanoparticles and their ferromagnetic properties” Carlos A. Diaz-Moreno, Rurik Farias-Mancilla, Jesús González-Hernández, Abel Hurtado-Macías, Daniel Bahena, Miguel José-Yacamán, Manuel Ramos Materials, (2014), 7, 7217-7725.

19. “Characterization of morphology and mechanical properties of Au-Cu thin film alloys by AFM and Nanoindentation”Joel Odelin Novelo Segura, Gerardo Manuel Alonzo Medina,Rubén Domínguez Maldonado, Juan Ramos Cano y Abel Hurtado Macias International Journal of Science and Advanced Technology (2014) Vol. 4 No. 10 27-32.

20. “Mechanical characterization of optical glass fiber coated with a thin film of silver nanoparticles by nanoindentation” A. Nevarez-Rascon, E. Orrantia-Borunda, J. González-Hernández, S. Flores-Gallardo, A. Hurtado-Macías., Materials Letters 136 (2014) 63–66.

INVESTIGACIÓN Información detallada (2014-2018)

INVESTIGACIÓN Información detallada (2014-2018)

21. “Magnetic behavior in LiNbO3 nanocrystallites caused by oxygen vacancies” C.A.Díaz-Moreno, R. Farías-Mancilla , J.A.Matutes-Aquino, J.Elizalde-Galindo, F. Espinosa-Magaña, J González-Hernández, A. Hurtado-Macías, Journal of Magnetism and Magnetic Materials 356 (2014) 82–86.

22. “Study of cantilever structures based on piezoelectric materials for energy harvesting at low frequency of vibration” AMBROSIO Roberto, GONZALEZ Hector, MORENO Mario, TORRES Alfonso, MARTINEZ Rafael, ROBLES Efren, SAUCEDA Angel, HURTADO Abel, HEREDIA, Advanced Materials Research Vol. 976 (2014) pp 159-163.

INVESTIGACIÓN Información detallada (2014-2018)

Artículo in extenso con arbitraje publicado en congreso internacional.

1. Análisis de las propiedades mecánicas de aleaciones intermetálicas Ti-Al por la técnica de nanoindentación, E. Huape, J. Bencomo, A. Hurtado, L. Bejar, M. Espinosa, J. Chacón, A. Martínez, CONGRESO INTERNACIONAL DE METALURGIA Y MATERIALES 2014, SAM-CONAMET/IBEROMAT, (2014)

2. EVALUACIÓN DE LAS PROPIEDADES MECÁNICAS DE ALUMINUROS DE HIERRO POR LA TECNICA DE NANOINDENTACIÓN, E. HUAPE-PADILLA, L. BEJAR-GOMEZ, A. MEDINA-FLORES y A. HURTADO-MACIAS. 2vo Foro de Ingeniería e Investigación en Materiales, Cuerpo Académico Consolidado de Ingeniería y Tecnología de Metales, Cerámicos y Aleaciones (2015)

3. nteresting Properties in LiNbO3 Nanoparticles, Carlos Diaz, Abel Hurtado, Jesús González, Jesús Eiras, Roberto Escudero y Miguel Yacaman, Jorge López and José Farias, MRS San Francisco (2015)

4. Low loss Electron Energy Spectroscopy Characterization of Electronic Structure and Piezo-response of Ba 0.9 Ca 0.1 Ti 0.9 Zr 0.1 O3 Nanocrystals, G Herrera-Pérez, F Paraguay-Delgado, A Hurtado-Macias, R Borja Urby, G Tapia-Padilla, A Reyes-Rojas, LE Fuentes-Cobas, Microsocopy and microanalysis 2016, Microscopy Society of America (2016)

5. NTERFAZ GRáFICA EN COMSOL PARA SIMULACIÓN DE COSECHA DE ENERGíA POR UN DISPOSITIVO TIPO VIGA CANTILEVER, Pedro David Mares Castro, Alberto Díaz Díaz, Abel Hurtado Macías , ICM 2018 (10o. congreso internacional de investigación científica multidisciplinaria), ITESM (2018)

Artículo in extenso con arbitraje publicado en congreso nacional

INVESTIGACIÓN Información detallada (2014-2018)

Capítulo en libro publicado (internacional)

1. Novel Synthesis of 4nm Anatase Nanoparticles at Room Temperature Obtained from TiO 2 Nanotube Structures by Anodizing Ti, Rafia Bashir (National Institute of Technology, Srinagar, India) and Hamida Chisti (National Institute of Technology, Srinagar, India). C. Y. Torres López, J. J. Pérez Bueno, I. Zamudio Torres, M. L. Mendoza-López, A. Hurtado Macías, J. E. Urbina. DOI: 10.4018/978-1-4666-6304-6.ch004

2. Procesamiento de películas ferroelectricas PT y PZT mediante CVDAA, Juan Ramos Cano, Mario Miki y Abel Hurtado, Editorial Académica Española, ISBN 978-3-659-08296-2

3. DISEÑO DE UN MICRO-COSECHADOR DE ENERGÍA BASADO EN TECNOLOGÍA MEMS Y MATERIALES PIEZOELÉCTRICOS PZT C.R., Ascencio Hurtado, J. Ramos Cano, R.C. Ambrosio Lázaro, P. Amézaga Madrid, M. Miki Yoshida, J. González Hernández , F. Espinosa Magaña y A. Hurtado Macías, 12/12/2014 Facultad de Metalurgia ISBN 978-607-506-202-0.

4. PELÍCULAS DELGADAS FERROELÉCTRICAS BASE PB-TI-ZR UNA NUEVA ERA EN LA INDUSTRIA MICROELECTRÓNICA, Ramos-Cano J., Amézaga-Madrid P.., Hurtado-Macías A., González-Hernández J., González- Zamarripa G. Soria- Aguilar M., Carrillo-Pedroza Fco. R., Miki-Yoshida M, Facultad de metalurgia, ISBN 978-607-506-202-0.

Capítulo en libro publicado (nacional)

Libro publicado (internacional)

Libro publicado (nacional)

Citas durante el período evaluado. (autocitas no válidas)

Effect of Silver Nanoparticles in a Hydroxyapatite Coating applied by Atmospheric Plasma Spray., V. Orozco Carmona, C. Martínez Pérez, Renata de Lima, Leonardo Fernandes Fraceto, J. Romero García, A. Ledezma Pérez, Swen Marke. C. Rodríguez González. Abel Hurtado Macías and A. Martínez-Villafañe. International Journal of Electrochemical Science (2014), 9, 7471-7494.

1. “Metal-based nanosystems for diagnosis”; Roxana Cristina Popescu, Mariana Oana Mihaela Fufă1, Alexandru Mihai Grumezescu; Romanian Journal of Morphology & Embryology; 2015; Vol 56 (2 Suppl); page 635–649. http://www.rjme.ro/RJME/resources/files/561215635649.pdf

2. Properties of calcium phosphates ceramic composites derived from natural materialsAuthor links open overlay panel .LertcumfuaP .JaitaabcS.ManothamaP .Jarupoomd S. EitssayeamaK.PengpataG.Rujijanagula. https://doi.org/10.1016/j.ceramint.2016.03.162

3. Effect of micron sized silver particles concentration on the adhesion induced by sintering and antibacterial properties of hydroxyapatite microcomposites, A. Maidaniuc, M. Miculescu,S. I. Voicu,L. T. Ciocan,M. Niculescu,M. C. Corobea; Pages 1829-1841 | Received 29 Jan 2016, Accepted 06 Mar 2016, Published online: 24 Mar 2016, https://doi.org/10.1080/01694243.2016.1163808

4. Chapter 1 - Specifically targeted imaging using functionalized nanoparticles; Roxana Cristina Popescu12Mariana Oana MihaelaFufă13EcaterinaAndronescu1Alexandru MihaiGrumezescu. https://doi.org/10.1016/B978-0-323-41736-5.00001-7

5. Optimisation of micro-arc oxidation electrolyte for fabrication of antibacterial coating on titanium; Dilek Teker Aydogan,Faiz Muhaffel,Meryem Menekse Kilic,Ozge Karabiyik Acar,Grzegorz; Materials Technology; Vol 33; 2018; Pages 1-8; https://doi.org/10.1080/10667857.2017.1391931

6. Chapter 16 - Silver-based nanostructures for cancer therapy; Oana Fufă, Roxana C. Popescu, Tudor G. Gherasim, Alexandru M. Grumezescu, Ecaterina Andronescu; Book chapter; Nanostructures for Cancer Therapy; Micro and Nano Technologies; 2017, Pages 405-428. https://doi.org/10.1016/B978-0-323-46144-3.00016-7

7. Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications; Noam Eliaz and Noah Metoki; Materials (Basel). 2017 Mar 24; Vol 10(4); pii: E334; https://doi.org/10.3390/ma10040334

8. Europium-Doped Hydroxyapatite Nanorods: Influence of Silver Doping; S. Asha, Nimrodh Ananth, Sujin P. Jose and M. A. Jothi Rajan; International Journal of Nanoscience; Vol. 17; No. 03; 760034 (2018). https://doi.org/10.1142/S0219581X17600341

9. Nanostructurated Composites Based on Biodegradable Polymers and Silver Nanoparticles; Oana Fufă, Oana Fuf, George Mihail Vlăsceanu, Georgiana Dolete, Daniela Cabuzu, Rebecca Alexandra Puiu, Andreea Cîrjă Bogdan, Nicoară Alexandru, Mihai Grumezescu; Book chapter; 2017; https://doi.org/10.1002/9781119441632.ch144

10. Optimisation of micro-arc oxidation electrolyte for fabrication of antibacterial coating on titanium; D Teker Aydogan, F Muhaffel, M Menekse Kilic… - Materials …, 2018 - Taylor & Francis; https://doi.org/10.1080/10667857.2017.1391931

11. Europium-Doped Hydroxyapatite Nanorods: Influence of Silver Doping; S Asha, N Ananth, SP Jose… - International Journal of …, 2018 - World Scientific; https://doi.org/10.1142/S0219581X17600341

12. A NEW COMPOSITE COATING FOR 316 L STAINLESS STEEL IMPLANT; AS Hameed - Pak. J. Biotechnol. Vol, 2018 - pjbt.org; http://www.pjbt.org/uploads/2018/Vol-5/PJBT-VOL-15-NO-2-OF-YEAR-2018%20(22).pdf

13. Advanced review on extraction of nickel from primary and secondary sources; P Meshram, Abhilash, BD Pandey - Mineral Processing and …, 2018 - Taylor & Francis; https://doi.org/10.1080/08827508.2018.1514300

14. Leaching kinetic of Nd. Y, Pr and Sm in rare earth hydroxide (REOH) use nitric acid; MV Purwani - Journal of Physics: Conference Series, 2018 - iopscience.iop.org; http://iopscience.iop.org/article/10.1088/1742-6596/962/1/012061/meta

15. Optimisation of micro-arc oxidation electrolyte for fabrication of antibacterial coating on titanium; D Teker Aydogan, F Muhaffel, M Menekse Kilic… - Materials …, 2018 - Taylor & Francis; https://doi.org/10.1080/10667857.2017.1391931

16. Europium-Doped Hydroxyapatite Nanorods: Influence of Silver Doping; S Asha, N Ananth, SP Jose… - International Journal of …, 2018 - World Scientific; https://doi.org/10.1142/S0219581X17600341

17. A NEW COMPOSITE COATING FOR 316 L STAINLESS STEEL IMPLANT; AS Hameed - Pak. J. Biotechnol. Vol, 2018 - pjbt.org; http://www.pjbt.org/uploads/2018/Vol-5/PJBT-VOL-15-NO-2-OF-YEAR-2018%20(22).pdf

18. Advanced review on extraction of nickel from primary and secondary sources; P Meshram, Abhilash, BD Pandey - Mineral Processing and …, 2018 - Taylor & Francis; https://doi.org/10.1080/08827508.2018.1514300

19. Leaching kinetic of Nd. Y, Pr and Sm in rare earth hydroxide (REOH) use nitric acid; MV Purwani - Journal of Physics: Conference Series, 2018 - iopscience.iop.org; http://iopscience.iop.org/article/10.1088/1742-6596/962/1/012061/meta

“Mechanical characterization of optical glass fiber coated with a thin film of silver nanoparticles by nanoindentation” A. Nevarez-Rascon, E. Orrantia-Borunda, J. González-Hernández, S. Flores-Gallardo, A. Hurtado-Macías., Materials Letters 136 (2014) 63–66.

20. “Effect of fiber surface modification on water absorption and hydrothermal aging behaviors of GF/pCBT composites”; Bin Yang, Ji feng Zhang, Limin Zhou, Mingkun Lu, Wenyan Liang, Zhenqing Wang; Composites Part B: Engineering; Volume 82; December 2015; Pages 84-91. https://doi.org/10.1016/j.compositesb.2015.08.056

21. “Mapping the local modulus of Sylramic silicon carbide fibers by nanoindentation”; F.Solá, R.Bhatt; Materials Letters; Volume 159; November 2015; Pages 395-398. https://doi.org/10.1016/j.matlet.2015.07.025

22. Improved adhesion between nickel–titanium SMA and polymer matrix via acid treatment and nano-silica particles coating; Bin Yang, Yong chao Zhang, Fu-Zhen Xuan, Biao Xiao, Liang He & Yang Gao; Advanced Composite Materials ; volume 27, 2018 - Issue 3. https://doi.org/10.1080/09243046.2017.1346881

23. Development and Performance Evaluation of Anti-cavitation Paint with a Lamella Glass-flake; Park, Hyeyoung; Kim, Sung-gil; Kim, Sang-suk; Choi, I-chan; Kim, Byungwoo; Kim, Seung-jin; Korean Chemical Engineering Research ; Volume 54, Issue 2; Pages.145-151; 2016. https://doi.org/10.9713/kcer.2016.54.2.145

24. Improved adhesion between nickel–titanium SMA and polymer matrix via acid treatment and nano-silica particles coating; B Yang, Y Zhang, FZ Xuan, B Xiao, L He… - Advanced Composite, 2018 - Taylor & Francis.

“Study of cantilever structures based on piezoelectric materials for energy harvesting at low frequency of vibration” AMBROSIO Roberto, GONZALEZ Hector, MORENO Mario, TORRES Alfonso, MARTINEZ Rafael, ROBLES Efren, SAUCEDA Angel, HURTADO Abel, HEREDIA, Advanced Materials Research Vol. 976 (2014) pp 159-163.

25. "Improvements in energy harvesting capabilities by using different shapes of piezoelectric bimorphs"; R. Hosseini, M. Hamedi; Journal of Micromechanics and Microengineering; Vol. 25; p. 125008; 2015. https://doi.org/10.1088/0960-1317/25/12/125008

26. Improving Power Density of Piezoelectric Vibration Based Energy Scavengers; R. Hosseini, O. Zargar, M. Hamedi; Journal of Solid Mechanics ; Vol. 10, No. 1; 2018; pp. 98-10. http://jsm.iau-arak.ac.ir/article_539696_79670b78c8fb31c02ab4753916b77fc4.pdf

27. (Vibration Energy Harvesting Using Bimorph Piezoelectric Cantilever) ارتعاشی انرژی بر�داشت ; حسینی اله روح پیزوالک�تریک دوالیه با سر�درگیر یک تیر� از استفاده لطافتی 1 با محمدحسن ؛ 2 ؛

مقدم حسینی دوره 1 مقاله; 3 سیدسجاد شماره 7 ، بهار 1 ، صفحه 1396 ، ، 1 - 9 . https://doi.org/10.22044/jsfm.2017.945

28. Improving Power Density of Piezoelectric Vibration-Based Energy Scavengers; R Hosseini, O Zargar, M Hamedi - Journal of Solid Mechanics Vol, 2018 - jsm.iau-arak.ac.ir; http://jsm.iau-arak.ac.ir/article_539696_79670b78c8fb31c02ab4753916b77fc4.pdf

"Characterization of Nanomechanical, Ferroelectric, and Piezoelectric Properties by Nanoindentation and Piezoresponse Force Microscopy of PbTiO3” Thin Films.Juan Ramos-Cano, Mario Miki-Yoshida, André Marino Goncalves, José Antonio Eiras, Jesús González-Hernández, José Antonio Rodríguez-López, Patricia Amézaga-Madrid, and Abel Hurtado-Macías, Ind. Eng. Chem. Res., 52, 14328−14334 (2013).

29. “Surface free energy effect on electro-mechanical behavior of piezoelectric thin film with square nanofibers under anti-plane shear”; Xue-Qian Fang, Ming-Juan Huang, Zi-Tao Zhu, Jin-Xi Liu; Acta Mechanica; January 2015; Volume 226, Issue 1; pp 149–156. https://doi.org/10.1007/s00707-014-1174-5

Hardness and Elastic Modulud on Six-Fold Symmetry Gold Nanoparticles Manuel Ramos, Luis Ortiz Jordan, Abel Hurtado-Macias Jose T. Elizalde Galindo, Carmen Rocha, Brenda Torres, Maryam Zarei-Chaleshtori, and Russell. R. Chianelli, Materials, 6, 198-205 (2013)

30. “Influence of surface energy on the elastic compression of nanosphere “; Long, J.M.; Qin, X.; Wang, G.F.; Journal of Applied Physics; 2015; Vol 117; Page 054310. https://doi.org/10.1063/1.4907689

31. “Compressive behavior of crystalline nanoparticles with atomic-scale surface steps”; Wang, G.; Bian, J.; Feng, J.; Feng, X.; Materials Research Express; 2014; Vol 2; page 015006. https://doi.org/10.1088/2053-1591/2/1/015006

32. “Mechanical properties of nanoparticles: basics and applications”; Guo, D.; Xie, G.; Luo, J.; Journal of Physics D: Applied Physics; 2014; Vol 47; page 013001. https://doi.org/10.1088/0022-3727/47/1/013001

33. “Structured strengthening by two-wave optical ablation in silica with gold nanoparticles.”; Torres-Torres, D.; Torres-Torres, C.; Vega-Becerra, O.; Cheang-Wong, J.; Rodríguez-Fernández, L.; Crespo-Sosa, A.; Oliver, A; Optics & Laser Technology; 2015; Vol 75; page 115. https://doi.org/10.1016/j.optlastec.2015.06.027

34. “Elastic compression of nanoparticles with surface energy. “; Ding, Y.; Niu, X.-R.; Wang, G.-F; Journal of Physics D: Applied Physics; 2015; Vol 48; page 485303. https://doi.org/10.1088/0022-3727/48/48/485303

35. “Efficient Fabrication Process of Metal Nanodot Arrays Using Direct Nanoimprinting Method with a Polymer Mold “; Potejanasak, P.; Yoshino, M.; Terano, M.; Mita, M.; International Journal of Automation Technology; 2015; Vol 9; page 629. https://doi.org/10.20965/ijat.2015.p0629

36. An analytical description for the elastic compression of metallic polyhedral, nanoparticles. AIP Advances 6, 085113 (2016); https://doi.org/10.1063/1.4961638, L. Yang, J. Feng, Y. Ding, J. J. Bian, and  G. F. Wanga)

37. Domain switching characteristics of lead zirconate titanate piezoelectric ceramics on a nanoscopic scale; Mitsuhiro Okayasu, Kohei Bamba; Journal of the European Ceramic Society; Volume 37, Issue 1; January 2017, Pages 145-159. https://doi.org/10.1016/j.jeurceramsoc.2016.07.034

38. Electrical conduction at domain walls in lead titanate (PbTiO3) single crystals; N. Faraji1, Z. Yan and J. Seidel; Applied Physics Letters; Volume 110, Issue 21; 2017. https://doi.org/10.1063/1.4983642

39. Impact of atomic-scale surface morphology on the size-dependent yield stress of gold nanoparticles; Liang Yang, Jian-Jun Bian and Gang-Feng Wang; Journal of Physics D: Applied Physics; Volume 50, Number 24; Published 25 May 2017. https://doi.org/10.1088/1361-6463/aa7096

40. Determination of pore size distributions of virus filtration membranes using gold nanoparticles and their correlation with virus retention; Peter Kosiol, Björn Hansmann, Mathias Ulbricht, Volkmar Thom; Journal of Membrane Science, Volume 533, July 2017, Pages 289-301. https://doi.org/10.1016/j.memsci.2017.03.043

41. Mechanical properties and dislocation nucleation in nanocrystals with blunt edges; JonathanAmodeoaKhalidLizoulab; Materials & Design; Volume 135, 5 December 2017; Pages

223-231. https://doi.org/10.1016/j.matdes.2017.09.00942. Metastable phase transformation and deformation twinning induced hardening-stiffening

mechanism in compression of silicon nanoparticles; Y Hong, N Zhang, MA Zaeem - Acta Materialia, 2018 – Elsevier; https://doi.org/10.1016/j.actamat.2017.11.034

43. Synthesis and characterization of hollow gold nanoparticles by recovery of gold from secondary resources; ZL Nia, M Naderi - Journal of the Iranian Chemical Society, 2018 – Springer; https://doi.org/10.1007/s13738-017-1254-2

44. Investigations on the elasticity of functional gold nanoparticles using single-molecule force spectroscopy; L Sun, R Riedel, SG Stanciu, F Yang… - Journal of Materials …, 2018. DOI:10.1039/C7TB03309E

“Multiferroic response of nanocrystalline lithium niobate” A Carlos Díaz-Moreno, Rurik Farias, Abel Hurtado-Macias, Jose Elizalde-Galindo, and Juan Hernandez-Paz, Journal of Physics. D: Applied Physics 111, 07D907 (2012).

45. “Multiferroicity in polar phase LiNbO3 at room temperature”; M. Manikandan, K. Saravana Kumar, N. Aparnadevi, N. Praveen Shanker, C. Venkateswaran.; (2015); Journal of Magnetism and Magnetic Materials; Vol 391; Page: 156-160. https://doi.org/10.1016/j.jmmm.2015.04.099

46. “Room temperature ferromagnetism of nonmagnetic element Ca-doped LiNbO3 films”; Hua-rui Liu, Min Li, Peng Sun, Shi-qi Wang, Xin Jin, Xian-ke Sun, Yu-kai An, Ji-wen Liu; 2014; Optoelectronics Letters ; Vol 10:2; page: 115-118. https://doi.org/10.1007/s11801-014-3225-5 .

47. Journal of Advanced Ceramics, March 2016, Volume 5, Issue 1, pp 84–92| Cite as, Structural, dielectric, and electrical properties of lithium niobate microfibers, Cícero Rafael Cena, Ajay Kumar Behera, Banarji Behera, Research Article, First Online: 31 March 2016.

48. Ferromagnetism in chemically reduced LiNbO3 and LiTaO3crystals, Tao Yan1, Ning Ye1, Liuwei Xu1, Yuanhua Sang2,4, Yanxue Chen3, Wei Song5, Xifa Long1, Jiyang Wang2 and Hong Liu2,4, Published 14 April 2016 • © 2016 IOP Publishing LtdJournal of Physics D: Applied Physics, Volume 49, Number 19

49. Structural, dielectric, and electrical properties of lithium niobate microfibers; Cícero Rafael Cena, Ajay Kumar Behera, Banarji Behera; Journal of Advanced Ceramics; March 2016, Volume 5, Issue 1, pp 84–92. https://doi.org/10.1007/s40145-015-0176-7

50. LiNbO3 films: Potential application, synthesis techniques, structure, properties; M. P. Sumets, V. A. Dybov; V. M. Ievlev; Materials 2017, 10(4), 380. https://doi.org/10.3390/ma10040380

51. Structural and Magnetic Behavior of Oxidized and Reduced Fe Doped LiNbO3 Powders; CD Fierro-Ruiz, O Sánchez-Dena, EM Cabral-Larquier; Crystals, 2018; https://doi.org/10.3390/cryst8030108

Measurement of Mechanical Properties of an Electroless Ni−B Coating Using Nanoindentation”Carlos Domínguez-Ríos, Abel Hurtado-Macías, Roal Torres-Sánchez, Manuel A. Ramos, and Jesús González-Hernández “Ind. Eng. Chem. Res., 51, 7762−7768 (2012).

52. “Synthesis and properties of electrodeposited Ni–B–CeO2 composite coatings”; R.A. Shakoor, Ramazan Kahraman, Umesh S.Waware, YuxinWang, Wei Gao; Materials & Design; Volume 59; July 2014; Pages 421-429. https://doi.org/10.1016/j.matdes.2014.03.024

53. “Properties of electrodeposited Ni–B–Al2O3 composite coatings”; R.A. Shakoor, Ramazan Kahraman, Umesh Waware, Yuxin Wang, Wei Gao; Materials & Design; Volume 64; December 2014; Pages 127-135. https://doi.org/10.1016/j.matdes.2014.07.026

54. “Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni–B–TiO2 composite coatings”; Vahid Niksefat, Mohammad Ghorbani; Journal of Alloys and Compounds; Volume 633; 5 June 2015; Pages 127-136. https://doi.org/10.1016/j.jallcom.2015.01.250

55. “A study of nanoindentation for mechanical characterization of chromium and nickel borides’ mixtures formed by laser boriding”; M.Kulka, N.Makuch, P.Dziarski, A.Piasecki; Ceramics International; Volume 40; Issue 4; May 2014; Pages 6083-6094 https://doi.org/10.1016/j.ceramint.2013.11.059

56. “Synthesis and Properties of Electrodeposited Ni-B-Zn Ternary Alloy Coatings”; R. A. Shakoor, Ramazan Kahraman, Umesh S. Waware, Yuxin Wang, Wei Gao; International Journal of Electrochemical Science; Vol 9; (2014); page: 5520 – 5536. http://www.electrochemsci.org/papers/vol9/91005520.pdf

57. “Effect Of Annealing Temperature On Hardness And Wear Resistance Of Electroless Ni–B–Mo Coatings”; Ihsan Gökhan Serin And Ali Göksenli; Surface Review and Letters; Vol. 22; No. 05, 1550058; 2015. https://doi.org/10.1142/S0218625X15500584

58. “Effect of Annealing Temperature on the Corrosion Resistance of Electroless Ni-B-Mo Coatings”; Ihsan Gökhan Serin, Ali Göksenli, Behiye Yüksel, Rasid Ahmed Yildiz; Journal of Materials Engineering and Performance; August 2015; Volume 24, Issue 8; pp 3032–3037. https://doi.org/10.1007/s11665-015-1568-0

59. “Teaching “Design-for-Corrosion” to Engineering Undergraduates: A Case Study of Novel Ni-B Coatings for High Wear and Corrosive Applications”; Ramazan Kahraman, and R. A. Shakoor; Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education; Book charpter; 2015. https://doi.org/10.4018/978-1-4666-8183-5.ch002

60. “Electrodeposition of Ni-B-Zn Alloy Coatings and their Characterization”; R.A.Shakoor, Ramazan Kahraman, U.S. Wawarea, Yuxin Wang, Wei Gao; Proceedings of the 4th International Gas Processing Symposium, Advances in Gas Processing; October 2014; Vol 2015; Pages 149-157. https://doi.org/10.1016/B978-0-444-63461-0.50016-X .

61. “Hardness and wear behaviour of electroless Ni–B coatings”, J. N. Balaraju,A. Priyadarshi,Vinod Kumar,N. T. Manikandanath,P. Praveen Kumar &B. Ravisankar, Pages 1654-1665 | Received 10 Sep 2015, Accepted 26 Dec 2015, Published online: 08 Mar 2016, https://doi.org/10.1080/02670836.2015.1137683.

62. “Corrosion and tribological performance of PTFE-coated electroless nickel boron coatings”. Author links open overlay panelYWanaY.YuaL.CaoaM.ZhangaJ.GaobC.Qic. https://doi.org/10.1016/j.surfcoat.2016.09.001. Int. J. Electrochem. Sci., 11 (2016) 4231 – 4244, doi: 10.20964/2016.06.23..

63. International Journal of ELECTROCHEMICAL SCIENCE www.electrochemsci.org The Effect of Boron Content, Crystal Structure, Crystal Size on the Hardness and the Corrosion Resistance of Electrodeposited Ni-B Coatings J.R. López1,2, P.F. Méndez1,2, J. J. Pérez-Bueno1 , G. Trejo1 , G. Stremsdoerfer , Y. Meas1,

Artículo I. https://doi.org/10.4028/www.scientific.net/AMR.1133.391.64. H. Kahar et al., "Deposition of Electroless Nickel Boron as Printed Circuit Board Surface

Finish", Advanced Materials Research, Vol. 1133, pp. 391-395, 2016Artículo II. Online since: January 2016. Authors:Hardinnawirda Kahar, Zetty Akhtar A. Malek,  Siti Rabiatull Aisha Idris *, Mahadzir Ishak

65. Tribological Characterization of Electroless Ni–B Coatings Formed on Commercial Purity Magnesium; E. Correa, J. F. Mejía, J. G. Castaño, F. Echeverría and M. A. Gómez; Journal of Tribology; Volume 139; Issue 5; 051302; 2017. https://doi.org/10.1115/1.4036169

66. MEMS-based Ni–B probe with enhanced mechanical properties for fine pitch testing; Kyong tae Kim, Hong-Beom Kwon, Hye-Rin Ahn and Yong-Jun Kim; Micro and Nano Systems Letters; 20175:3; 2017. https://doi.org/10.1186/s40486-016-0039-1

67. Microstructure And Properties Of The Ni–B And Ni–B–Ce Ultrasonic-Assisted Electroless Coatings; Wei Qian, Hao Tian Chen, Chen Qi Feng, Li Ying Zhu; Huan Ming Wei, Sheng Han; Surface Review and Letters; Vol. 25, No. 06; 1950006; 2018. https://doi.org/10.1142/S0218625X19500069

68. PREPARATION AND CHARACTERIZATION OF ALKALINE ELECTROLESS Ni-B NANO DEPOSITION ON MILD STEEL IN THE PRESENCE OF AZADIRACHTA; S Dheenadhayalan, V Nijarubini, J Mallika - rasayanjournal.co.in 2018; http://dx.doi.org/10.31788/RJC.2018.1122085

69. MICROSTRUCTURE AND PROPERTIES OF THE Ni–B AND Ni–B–Ce ULTRASONIC-ASSISTED ELECTROLESS COATINGS; W Qian, H Chen, C Feng, L Zhu, H Wei… - Surface Review and …, 2018 - World Scientific; https://doi.org/10.1142/S0218625X19500069

70. The Importance of Electroless Metallic Build-Up on Surface Modified Substrates for Multifunctional Engineering Applications: A Recent Progress Update; S Gharde, B Kandasubramanian - Transactions of the Indian Institute of …, 2018 – Springer; https://link.springer.com/article/10.1007/s12666-018-1397-6

“In situ TEM study of mechanical behaviour of twinned nanoparticles” Gilberto Casillas, Juan Pedro Palomares-Báez, José Luis Rodríguez-López, Junhang Luo, Arturo Ponce, Rodrigo Esparza, J. Jesús Velázquez-Salazar, Abel Hurtado-Macias, Jesús González-Hernández and Miguel José-Yacaman, Philosophical Magazine, 1–17, iFirst (2012).

71. “Mechanical behaviour of nanoparticles: Elasticity and plastic deformation mechanisms; Celine Gerard, Laurent Pizzagalli; (2015); Pramana; vol 84:6; pages 1041-1048. https://doi.org/10.1007/s12043-015-0998-4

72. “Mechanical properties of nanoparticles: basics and applications”; Dan Guo, Guoxin Xie, Jianbin Luo; (2014); Journal of Physics D: Applied Physics; vol 47:1, pages 013001. https://doi.org/10.1088/0022-3727/47/1/013001

73. “Atomistic deformation mechanisms in twinned copper nanospheres”; Jianjun Bian, Xinrui Niu, Hao Zhang, Gangfeng Wang. (2014); Nanoscale Research Letters; Vol 9:1, pages 335.

https://doi.org/10.1186/1556-276X-9-335 .

74. In situ transmission electron microscopy mechanical deformation and fracture of a silver nanowire. Author links open overlay panelDiegoAlducinaRaulBorjaaEduardoOrtegaaJ. JesusVelazquez-Salazara, MarioCovarrubias, Fernando MendozaSantoyo,LourdesBazán-Díaza, Miguel José-Yacamán.. https://doi.org/10.1016/j.scriptamat.2015.10.011.

75. In situ transmission electron microscopy experimentation of nanostructured materials, Alducin, Diego.The University of Texas at San Antonio, ProQuest Dissertations Publishing, 2016. 10151236.

76. Orientation-dependent deformation mechanisms of bcc niobium nanoparticles; J. J. Bian, L. Yang, X. R. Niu & G. F. Wang; Philosophical Magazine; Volume 98, 2018 - Issue 20; Pages 1848-1864; 2018. https://doi.org/10.1080/14786435.2018.1459059

77. Anisotropic Deformation in the Compressions of Single Crystalline Copper Nanoparticles; Jianjun Bian, Hao Zhang, Xinrui Niu, Gangfeng Wang; Condensed Matter Materials Science; 2018; Vol 8; 116. https://doi.org10.3390/cryst8030116

78. Bionanocomposites: Integrating Biological Processes for Bioinspired Nanotechnologies; Carole Aimé (Editor), Thibaud Coradin (Editor); book chapter; ISBN: 978-1-118-94222-2 September 2017 400 Pages. https://www.wiley.com/en-us/Bionanocomposites%3A+Integrating+Biological+Processes+for+Bioinspired+Nanotechnologies-p-9781118942222

79. Orientation-dependent deformation mechanisms of bcc niobium nanoparticles; JJ Bian, L Yang, XR Niu, GF Wang - Philosophical Magazine, 2018 - Taylor & Francis; https://doi.org/10.1080/14786435.2018.1459059

80. Anisotropic Deformation in the Compressions of Single Crystalline Copper Nanoparticles; J Bian, H Zhang, X Niu, G Wang - Crystals, 2018 - mdpi.com; https://doi.org/10.3390/cryst8030116

81.

“Characterization of Kevlar-29 fibers by tensile tests and nanoindentation” J.A. Bencomo-Cisneros, A. Tejeda-Ochoa, J.A. García-Estrada, C.A. Herrera-Ramírez, A. Hurtado-Macías, R. Martínez-Sánchez, J.M. Herrera-Ramírez, Journal of Alloys and Compounds 536S pp4 (2012).

82. “A high-performance spectrally-selective solar absorber based on a yttria-stabilized zirconia cermet with high-temperature stability”; Feng Cao, Daniel Kraemer, Lu Tang, Yang Li, Alexander P. Litvinchuk, Jiming Bao, Gang Chen and Zhifeng Ren; Energy & Environmental Science; 2015; Vol 8; pag 3040-3048. https://doi.org/10.1039/C5EE02066B

83. “Single and multi-layered core-shell structures based on ZnO nanorods obtained by aerosol assisted chemical vapor deposition; A.Sáenz-Trevizo, P.Amézaga-Madrid, P.Pizá-Ruiz, W.Antúnez-Flores, C.Ornelas-Gutiérrez, M.Miki-Yoshida; Materials Characterization; Volume 105; July 2015; Pages 64-70. https://doi.org/10.1016/j.matchar.2015.04.020

84. “Preparation and characterization of epitaxially grown unsupported yttria-stabilized zirconia (YSZ) thin films” Thomas Götscha, Lukas Mayr; Michael Stöger-Pollach; Bernhard Klötzer; Simon Penner; Applied Surface Science; Volume 331; 15 March 2015; Pages 427-436.

https://doi.org/10.1016/j.apsusc.2015.01.06885. DOI: 10.1039/C5RA22620A (Review Article) RSC Adv., 2016, 6, 1076-1089

The degradation of mechanical properties in polymer nano-composites exposed to liquid media – a review.

86. Mohd Shahneel Saharudin   ab,   Rasheed Atif   b,   Islam Shyha   b   and   Fawad Inam   *b Strength and toughness of structural fibres for composite material reinforcementM. Herráez , A. Fernández , C. S. Lopes , and   C. González Published:13 July 2016 https://doi.org/10.1098/rsta.2015.0274

87. International Advanced Research Journal in Science, Engineering and Technology ISO 3297:2007 Certified Vol. 3, Issue 12, December 2016 Copyright to IARJSET DOI 10.17148/IARJSET.2016.31217 83 Effect of Stacking Sequence on Mechanical/ Vibration Characteristics of Kevlar/Glass Hybrid Reinforced Polymer Composites Sandesh K. J. 1 , Umashankar K.S. 2 , Chethan Madappady3 , Mohan Kumar N.M.4 , Thejesh C.K.5

88. Investigation of Flexural Response of Kevlar Composite S. Rajesh   1*,   B. VijayaRamnath   2,   V. Sudharsanan   2,   K. Yuvaraj   2,   R. Samsen Daniel   2 Affiliations, Department of Mechanical Engineering, St. Peter's University, Chennai − 600054, Tamil Nadu, India, Department of Mechanical Engineering, Sri Sai Ram Engineering College, Chennai − 600 044, Tamil Nadu, India, DOI:   10.17485/ijst/2016/v9iS1/108441

89. Caractérisation du comportement mécanique longitudinale d'un fil de para-aramide en sollicitation dynamique, Caroline Chevalier   1   Détails   LAMIH - Laboratoire d'Automatique, de Mécanique et d'Informatique industrielles et Humaines - UMR 8201Mécanique des matériaux [physics.class-ph]. Université de Valenciennes et du Hainaut-Cambresis, 2016. Francais.   〈 NNT : 2016VALE0030 〉 Domaine   : Sciences de l'ingénieur [physics]   /   Mécanique [physics.med-ph]   /   Mécanique des matériaux [physics.class-ph]

90.利用 TG-FTIR 联用技术对 Kevlar 纤维的热解过程的分析 杨铭 ， 朱小玲 ， 梁国正   - 光 谱学与光谱分析 , 2016 - manu13.magtech.com.cn 摘要 现代工业应用与技术领域要求材料具有良好的机械性质与热学性质 , Kevlar   纤维做为近年来材料领域研究的热点纤维材料 , 具有高 强度 , 耐高温等良好的性能 .   纤维材料的性质依赖于自身的结构和组成 , 热分解过程对于研究材料的结构和热学性质有 着十分   …

91. Characterization of antibacterial silver nanocluster/silica composite coating on high performance Kevlar® textile; Cristina Balagna, Muhammad Irfan, Sergio Perero, Marta Miola, Giovanni Maina, Daniela Santella, Antonia Simone; Surface and Coatings Technology; Volume 321; July 2017; Pages 438-447. https://doi.org/10.1016/j.surfcoat.2017.05.009

92. Modeling the Fibrillation of Kevlar® KM2 Single Fibers Subjected to Transverse Compression; JM Staniszewski, S Sockalingam, TA Bogetti… - Fibers and …, 2018 – Springer; https://link.springer.com/article/10.1007/s12221-018-8127-x

93. Two different modelling approaches for fabric composites subjected to ballistic impact; R Scazzosi, A Manes, G Petrone… - IOP Conference Series …, 2018 - iopscience.iop.org;

http://iopscience.iop.org/article/10.1088/1757-899X/406/1/012051/meta

94. Mechanical characterization and damage mechanism of a new flax-Kevlar hybrid/epoxy composite; C Audibert, AS Andreani, É Lainé, JC Grandidier - Composite Structures, 2018 – Elsevier; https://doi.org/10.1016/j.compstruct.2018.04.061

95. Experimental research on the mechanism of non-monotonic characteristic between curing temperature and mechanical behaviors of Kevlar/epoxy composite; L Liu, DA Hu, YM Zhang, X Han - Science China Technological Sciences, 2018 – Springer; https://link.springer.com/article/10.1007/s11431-017-9254-1

96. Mild Solvothermal Growth of Robust Carbon Phosphonitride Films; BL Chaloux, JM Shockley, KJ Wahl, S Tsoi… - Chemistry of …, 2018 - ACS Publications; DOI: 10.1021/acs.chemmater.8b02508

97. Processamento por infusão a vácuo de compósitos espessos aramida/epóxi e análise do desempenho sob impacto; SG Nunes - 2018 - lume.ufrgs.br; https://www.lume.ufrgs.br/handle/10183/180659

Inter Laboratory Comprarison and Analysis on Mechanical Properties By Nanoindentation J. M. Alvarado-Orozco, C. Cárdenas-Jaramillo, D. Torres-Torres, R. Herrera-Basurto, A. Hurtado-Macias, J. Muñoz-Saldaña and G. Trápaga-Martinez. Inter Laboratory Research Society. Vol.1243. No.1243. pp6 (2010).

98. “Resonance tracking atomic force acoustic microscopy quantitative modulus mapping of carbon nanotubes-reinforced acrylonitrile-butadiene-styrene polymer; Flores-Ruiz Francisco Luis, Reyes-Reyes José Fernando, Chiñas-Castillo and Espinoza-Beltrán Francisco; “Journal of Applied Polymer Science”; 2014; Vol. 131, Issue. 16, p. n/a. https://doi.org/10.1002/app.40628

99. Instrumented indentation of fused silica by Berkovich indenter; Chenghui Gao, Ming Liu; Journal of Non-Crystalline Solids; Volume 475, November 2017, Pages 151-160. https://doi.org/10.1016/j.jnoncrysol.2017.09.006

Geometry and bluntness tip effects on elastic-plastic behaviour during nanoindentation of fused silica: experimental and FE simulation. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Vol.18. No.075006. pp16 (2010)D Torres-Torres, J Muñoz-Saldaña, L A Gutierrez-Ladron-de Guevara, A Hurtado-Macías and M V Swain.

100. “An experimental study of solid matrix weakening in water-saturated Savonnières limestone”; M. Lebedev, M.E.J. Wilson and V. Mikhaltsevitch; “; Geophysical Prospecting; Vol 62, No 6, November 2014 pp. 1253 – 1265. https://doi.org/10.1111/1365-2478.12168

101. “Influencing factor analysis of shale micro-indentation measurement”; Qiang Han, Ping Chen, Tianshou Ma; Journal of Natural Gas Science and Engineering; Volume 27, Part 2; November 2015; Pages 641-650. https://doi.org/10.1016/j.jngse.2015.09.010 .

102. Extraction of elastic modulus of porous ultra-thin low-k films by two-dimensional finite-element simulations of nanoindentation. Journal of Applied Physics 119, 025302 (2016); https://doi.org/10.1063/1.4939284, O. O. Okudur1,2, a), K. Vanstreels2,   I. De Wolf1,2, and U. Hangen3

103. Deformation, failure and removal mechanisms of thin film structures in abrasive

machining; Cheng-Wei Kang, Han Huang; Advances in Manufacturing; March 2017; Volume 5, Issue 1, pp 1–19. https://doi.org/10.1007/s40436-016-0165-2

104. Finite element simulation based‐on atomic force microscopy and nanoindentation for spruce wood microstructure analysis; David Torres‐Torres, Jesús A. Torres, Alejandra García‐García; Microscopy research and technique; 2018; page 1–10. https://doi.org/10.1002/jemt.23194

105. Berkovich nanoindentation of borosilicate K9 glass; C Gao, L Yao, M Liu - Optical Engineering, 2018 - spiedigitallibrary.org; https://doi.org/10.1117/1.OE.57.3.034104

106. Artificial Neural Network and Finite Element Modeling of Nanoindentation Tests on Silica; K KOOCHEKI - 2018 - digitalcommons.unl.edu; https://digitalcommons.unl.edu/civilengdiss/124/

Surface texture and tetragonality of mechanically affected powders and sintered ceramics of BaTiO3 A. Hurtado-Macias, V. Torres-Heredia, J. Muñoz-Saldaña, F. J. Espinoza Beltrán, R.A.Vargas Ortiz, M. A. Hernández Landaverde and J. González-Hernández. Materials Research Innovations. Vol.13. No.03. pp5 (2009).

107. “Characteristics of BaTiO 3 –carbon nanotube composite synthesised by mechanical milling”; J. G. Sriram, N. Nivas, S. Balasivanandha Prabu, M. Pradeep Kumar. (2015). Materials Research Innovations; Vol 19:4; pages 265-269. https://doi.org/10.1179/1433075X14Y.0000000261

Nanoindentation of BaTiO3: dislocation nucleation and mechanical twinning Y. Gaillard, A Hurtado Macías, J Muñoz-Saldaña, M Anglada and G Trápaga. J. Phys. D: Appl. Phys. 42 (2009) 085502 (8pp).

108. “Influence of epitaxial strain on elastocaloric effect in ferroelectric thin films”; Yang Liu, Jie Wei, Xiaojie Lou, L. Bellaiche, James F. Scott, Brahim Dkhil; 2015, Applied Physics Letters; Vol 106; issue 3. https://doi.org/10.1063/1.4906198

109. “Ferroelastic domain switching dynamics under electrical and mechanical excitations”; Peng Gao, Jason Britson, Christopher T. Nelson, Jacob R. Jokisaari, Chen Duan, Morgan Trassin, Seung-Hyub Baek, Hua Guo, Linze Li, Yiran Wang, Ying-Hao Chu, Andrew M. Minor, Chang-Beom Eom, Ramamoorthy Ramesh, Long-Qing Chen, Xiaoqing Pan; 2014; Nature Communications; Vol 5; N° 3801; 2014. https://doi.org/10.1038/ncomms4801

110. “Theoretical Methods of Domain Structures in Ultrathin Ferroelectric Films: A Review”; Jianyi Liu, Weijin Chen, Biao Wang, Yue Zheng; 2014, Materials; Vol 7; pag 6502-6568. . https://doi.org/10.3390/ma7096502

111. “Giant Room‐Temperature Elastocaloric Effect in Ferroelectric Ultrathin Films”; Yang Liu, Ingrid C. Infante, Xiaojie Lou, Laurent Bellaiche, James F. Scott, Brahim Dkhil; Advanced Material; Vol 26; Issue35; September 17, 2014; Pages 6132-6137. https://doi.org/10.1002/adma.201401935

112. “Strain induced low mechanical switching force in ultrathin PbZr0.2Ti0.8O3 films”; E. J. Guo, R. Roth, S. Das, K. Dörr; 2014; Applied Physics Letters; Vol 105; pag 012903. https://doi.org/10.1063/1.4889892

113. “Mechanical switching of ferroelectric polarization in ultrathin BaTiO 3 films: The

effects of epitaxial strain”; Zheng Wen, Xiangbiao Qiu, Chen Li, Chunyan Zheng, Xiaohui Ge, Aidong Li, Di Wu; 2014; Applied Physics Letters; Vol 104; pag 042907. https://doi.org/10.1063/1.4863855

114. “Giant mechanically-mediated electrocaloric effect in ultrathin ferroelectric capacitors at room temperature”; Yang Liu, Ingrid C. Infante, Xiaojie Lou, Doru C. Lupascu, Brahim Dkhil; 2014; Applied Physics Letters; Vol 104; pag 012907. https://doi.org/10.1063/1.4861456 .

115. Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ31, Author links open overlay panel, Tingting, Guoa M.R.Barnetta.,https://doi.org/10.1016/j.scriptamat.2015.07.034

116. Nanoindentation and Scratch test on Thin Film Energy Materials; S. Bhattacharyya, Arnab; P. Kumar, Ramgiri; Acharya, Gaurav; Ranjan, Vivek; Source: Current Smart Materials, Volume 2, Number 1, June 2017, pp. 39-43(5): Publisher: Bentham Science Publishers; https://doi.org/10.2174/2405465801666161130154515

117. Giant electrocaloric effect in ferroelectric ultrathin films at room temperature mediated by flexoelectric effect and work function; Ye Qiu, Huaping Wu, Jie Wang, Jia Lou, Zheng Zhang, Aiping Liu, Takayuki Kitamura, and Guozhong Chai; Journal of Applied Physics 122, 024103 (2017). https://doi.org/10.1063/1.4992811.

118. Kinetics of Domain Switching by Mechanical and Electrical Stimulation in Relaxor-Based Ferroelectrics; Zibin Chen, Liang Hong, Feifei Wang, Xianghai An, Xiaolin Wang, Simon Ringer, Long-Qing Chen, Haosu Luo, and Xiaozhou Liao; Phys. Rev. Applied 8, 064005 – Published 6 December 2017. https://doi.org/10.1103/PhysRevApplied.8.064005

119. In-situ electron microscopy investigation of ferroelectric domain switching kinetics; Z Chang; 2017; PhD Thesis; https://ses.library.usyd.edu.au/bitstream/2123/16688/2/chen_z_thesis.pdf

120. Ultra-high specific strength and deformation behavior of nanostructured Ti/Al multilayers; Kunkun Fu, Xianghai An, Li Chang, Leigh Sheppard, Chunhui Yang, Hongjian Wang and Lin Ye; Journal of Physics D: Applied Physics, Volume 50, Number 36. https://doi.org/10.1088/1361-6463/aa7f92

121. Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals; M Gruber, A Leitner, D Kiener, P Supancic, R Bermejo - Materials & Design, 2018 – Elsevier; https://doi.org/10.1016/j.matdes.2018.04.082

122. Response of oxide nanoparticles in an oxide dispersion strengthened steel to dynamic plastic deformation; Z Zhang, W Pantleon - Acta Materialia, 2018 – Elsevier; https://doi.org/10.1016/j.actamat.2018.02.042

123. Anisotropic slip activation via homogeneous dislocation nucleation in ZrB2ceramic grains during nanoindentation; T Csanádi, A Naughton-Duszová, J Dusza - Scripta Materialia, 2018 – Elsevier; https://doi.org/10.1016/j.scriptamat.2018.04.025

“Composition and mechanical properties of AlC, AlN, and AlCN thin films obtained by r.f. magnetron sputtering technique” L. Yate, J. C. Caicedo, A. Hurtado Macias, F. J. Espinoza Beltran, G. Zambrano, J. Muñoz-Saldaña, P. Prieto. , Surface and Coatings Technology. 203 1904–1907 (2009).

124. “Structural and Morphological Properties of Titanium Aluminum Nitride Coatings

Produced by Triode Magnetron Sputtering”; D.M.Devia, E. Restrepo-Parra , J.M.Velez-Restrepo; Ingeniería y Ciencia; Vol 10; N° 20; 2014; http://ref.scielo.org/ys74cd.

125. “Modeling of very thin aluminum nitride film mechanical properties from nanoindentation measurements”; F.Roudet, D.Chicot, X.Decoopman, A.Iosta, J.Bürgi, J.Garcia-Molleja, L.Nosei, J.Feugeas; Thin Solid Films; Volume 594, Part A; 2 November 2015; Pages 129-137. https://doi.org/10.1016/j.tsf.2015.10.010

126. “ВЫРАЩИВАНИЕ ПЛЕНОК НИТРИДА АЛЮМИНИЯ МЕТОДОМ ПЛАЗМОАКТИВИРОВАННОГО ОСАЖДЕНИЯ С РАЗДЕЛЬНОЙ ПОДАЧЕЙ РЕАГЕНТОВ”; ТАРАЛА В.А, АЛТАХОВ А.С, ШЕВЧЕНКО М.Ю, ВАЛЮХОВ Д.П, ЛИСИЦЫН С.В, МАРТЕНС В.Я; ИНФОРМАЦИЯ О ПУБЛИКАЦИИ; Том:51, Номер: 7, Год: 2015, Страницы: 795. https://doi.org/10.7868/S0002337X15070155

127. “Growth of aluminum nitride films by plasma-enhanced atomic layer deposition”; V. A. Tarala. A. S. Altakhov, M. Yu. Shevchenko, D. P. Valyukhov, S. V. Lisitsyn, V. Ya. Martens; Inorganic Materials; July 2015; Volume 51, Issue 7; pp 728–735. https://doi.org/10.1134/S0020168515070158

128. “Evaluación electroquímica de recubrimientos nanoestructurados de AIHfN obtenidos por sputtering”; Courrech Arias, Ayesha Margarita; Tesis de maestría, 2014. http://cdigital.uv.mx/handle/123456789/41524

129. “Propriétés mécaniques par indentation d’un film mince nanometrique de nitrure d’aluminium”; Francine Roudet, Didier Chicot, Xavier Decoopman, Alain Iost, Juan Bürgi, Javier García Molleja et Jorge Feugeas; Matériaux & Techniques; Vol 103; 605; 2015. https://doi.org/10.1051/mattech/2015054 .

130. Influence of the negative R.F. bias voltage on the structural, mechanical and electrical properties of Hf–C–N coatings. Author links open overlay panelWill F.PiedrahitaaL. EmersonCoybCésarAmayacIrantzuLlarenadJulio CésarCaicedoaLuisYated, https://doi.org/10.1016/j.surfcoat.2015.12.050.

131. MECHANICAL AND TRIBOLOGICAL PROPERTIES OF AlN HARD FILMS DEPOSITED BY REACTIVE MAGNETRON SPUTTERING NIKOLAY PETKOV1 , TOTKA BAKALOVA2 , TETIANA CHOLAKOVA1 , LUKÁŠ VOLESKÝ2 , PETR LOUDA, Copyright © 2016 by Technical University of Sofia, Plovdiv branch, Bulgaria ISSN 1310 – 8271.

132. DEPOSITION OF AlCN THIN FILMS BY REACTIVE DC MAGNETRON SPUTTERING AND TRIBOLOGY NIKOLAY PETKOV1 , TOTKA BAKALOVA2, Copyright © 2016 by Technical University of Sofia, Plovdiv branch, Bulgaria ISSN 1310 – 8271.

133. A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics; A Seyyed Amin Rounaghia Danny, E.P. Vanpouckeb, Hossein Eshghi, Sergio Scudino, Elaheh Esmaeili Steffen, Oswal de Jürgen Eckertgh; Journal of Alloys and Compounds; Volume 729, 30 December 2017, Pages 240-248. https://doi.org/10.1016/j.jallcom.2017.09.168

134. Fixing PAN nanofiber mats during stabilization for carbonization and creating novel metal/carbon composites; L Sabantina, M Rodríguez-Cano, M Klöcker… - Polymers, 2018 - mdpi.com; https://doi.org/10.3390/polym10070735

135. Effect of Pulsed Biasing on the Droplet Formation and the Properties of Cylindrical Cathodic Arc–Grown Erosion-Resistant TiN Coatings; K Valleti, K Sai Jyotheender… - Tribology …, 2018 - Taylor & Francis; https://doi.org/10.1080/10402004.2018.1502856

136. Effect of cutting parameters on tool wear, cutting force and surface roughness in machining of MDN431 alloy using Al and Fe coated tools; PV Badiger, V Desai, MR Ramesh… - Materials Research …, 2018 - iopscience.iop.org; http://iopscience.iop.org/article/10.1088/2053-1591/aae2a3/pdf

Kinetics and statistical analysis of nickel leaching from spent catalyst in nitric acid solution, Juan Ramos Cano, Gregorio González-Zamarripa and A. Hurtado Macías, International of Mineral Processing 148. (2016).

137. Khalid and Athraa, J Powder Metall Min 2016, 5:1 DOI: 10.4172/2168-9806.1000146 Research Article Open Access Journal of oJ Powder Metallurgy & Mining urnal ofPowder Metallurgy & Minni g ISSN: 2168-9806 Experimental Study on Factors Affecting the Recovery of Nickel from Spent Catalyst Khalid MM and Athraa BA* Chemical Engineering Department, Collage of Engineering, University of Nahrain, Iraq.

Nano-Mechanical and Structural study of WO3 thin films, Jose Luis Enriquez, Manuel Ramos, Jose Mireles, A. Hurtado-Macias., Thin Solid Film 606. (2016).

138. Enhanced mechanical properties of W1−yMoyO3 nanocomposite thin filmsJournal of Applied Physics 120, 245103 (2016); https://doi.org/10.1063/1.4971257 , G. A. Lopez, G. Martinez, and C. V. Ramanaa). Published Online: 30 December 2016. Accepted: November 2016.

139. Transparent heat regulating (THR) materials and coatings for energy saving window applications: Impact of materials design, micro-structural, and interface quality on; GK Dalapati, AK Kushwaha, M Sharma… - Progress in materials …, 2018 – Elsevier; https://doi.org/10.1016/j.pmatsci.2018.02.007

140. Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings; E Besozzi, D Dellasega, V Russo, M Passoni… - arXiv preprint arXiv …, 2018 - arxiv.org;https://arxiv.org/abs/1810.01201

“Structural aspects LiNbO3 nanoparticles and their ferromagnetic properties” Carlos A. Diaz-Moreno, Rurik Farias-Mancilla, Jesús González-Hernández, Abel Hurtado-Macías, Daniel Bahena, Miguel José-Yacamán, Manuel Ramos Materials, (2014), 7, 7217-7725.

141.  Preparation of Nanophotonics LiNbO3 Thin Films and Studying Their Morphological and Structural Properties by Sol-Gel Method for Waveguide ApplicationsAFN MaNram, MS Alwazni, AD Yarub, ET Salim… - World Academy of …, 2016 -

waset.org. Lithium niobate (LiNbO3) nanostructures are prepared on quartz substrate by the sol-gel method. They have been deposited with different molarity concentration and annealed at 500 C. These samples are characterized and analyzed by X-ray diffraction (XRD), Scanning …

142. Effects of Chemical Stirring Time on the Physical Properties for LiNbO3 Photonic Film Using of Optical Waveguide ApplicationsAuthor links open overlay panel Makram. A.FakhriabY. Al-Douriac Evan. T.SalimdUda.HashimaYushamdanYusofd, https://doi.org/10.1016/j.proche.2016.03.049Get rights and content

“Mechanical characterization of optical glass fiber coated with a thin film of silver nanoparticles by nanoindentation” A. Nevarez-Rascon, E. Orrantia-Borunda, J. González-Hernández, S. Flores-Gallardo, A. Hurtado-Macías., Materials Letters 136 (2014) 63–66.

143. 판상형 Glass-flake를 이용한 내캐비테이션 도료 개발 및 성능평가Development and Performance Evaluation of Anti-cavitation Paint with a Lamella Glass-flake. 박혜영 ( Hyeyoung Park ) , 김성길 ( Sung-gil Kim ) , 김상석 ( Sang-suk Kim ) , 최이찬 ( I-chan Choi ) , 김병우 ( Byungwoo Kim ) , 김승진 ( Seung-jin Kim ), 발행기관 : 한국화학공학회 발행년도 :2016, 간행물 : Korean Chem.Eng.Res.(화학공학), 54권 2호 페이지 : pp.145-151 ( 총 7 페이지 ).

Synthesis by aerosol assisted chemical vapor deposition and microstructural characterization of PbTiO3 thin films., J. Ramos-Cano, A. Hurtado-Macías, W. Antúnez-Flores, L. Fuentes-Cobas, J. González-Hernández, P. Amézaga-Madrid, M. Miki-Yoshida Thin Solid Films 531 179–184 (2013).

144. Prospects and challenges of perovskite type transparent conductive oxides in photovoltaic applications. Part II – Synthesis and deposition. Author links open overlay panel Muhammad ArifRiza Mohd Adib Ibrahim Ubani Charles Ahamefula Mohd Asri Mat Teridi Norasikin Ahmad Ludin Suhaila Sepeai Kamaruzzaman Sopianhttps://doi.org/10.1016/j.solener.2016.08.045

145. In situ deposition of PbTiO3 thin films by direct current reactive magnetron sputtering, Author links open overlay panel Aleksandras IljinasLiutauras MarcinauskasV yt autasStankus, https://doi.org/10.1016/j.apsusc.2015.12.124

“Synthesis, microstructural, optical and mechanical properties of yttria stabilized zirconia thin films” P. Amézaga-Madrid, A. Hurtado-Macías, W. Antúnez-Flores, F. Estrada-Ortiz, P. Pizá-Ruiz, M. Miki-Yoshida, Journal of Alloys and Compounds 536S pp1-4 (2012).

146. Open Published Online: 22 February 2016, Accepted: February 2016From zirconia to yttria: Sampling the YSZ phase diagram using sputter-deposited thin films. AIP Advances 6, 025119 (2016);  Thomas Götsch1, Wolfgang Wallisch2, Michael Stöger-Pollach2, Bernhard Klötzer1, and Simon Penner. https://doi.org/10.1063/1.4942818

147. Impurity-Governed Modification of Optical and Structural Properties of ZrO2-Based Composites Doped with Cu and Y; N. Korsunska, M. Baran, I. Vorona, V. Nosenko, S. Lavoryk, X. Portier and L. Khomenkova; Nanoscale Research Letters201712:157; 2017.

https://doi.org/10.1186/s11671-017-1920-4148. Characteristics of selected methods for the synthesis of nanometric zirconium oxide –

critical review; Kwaśny, J. , Balcerzak, W.; Technical Transactions; 2017; vol. 2; 105- https://doi.org/118. 10.4467/2353737XCT.17.021.6214

“Structural characterization of Silver Doped Silica Prepared by Two different Wet Chemical Methods” J.Angelito B., L.M.R. Avilés A., G. Barreiro R., R. Flores F., S. Flores F., N.A. Gerbero. G., M. A. Hernández L., A. Hurtado-Macías, A. M. López B., M. López Gómez, J. González Hernández. Journal of Sol Gel Science and Technology 30. 89-94 (2004).

149. Research Regarding a Correlation Core–Shell Morphology–Thermal Stability of Silica–Silver Nanoparticles, Paraschiva Postolache,Valentin Petrescu,Dan Dumitru Dumitrascu,Cristina Rimbu,Narcisa Vrînceanu &Calin Remus Cipaian, Pages 649-659 | Accepted author version posted online: 24 Aug 2015, Published online: 24 Aug 2015 https://doi.org/10.1080/00986445.2015.1078795

150. Method of manufacturing the silica nanopowders with biocidal properties, especially for polymer composites, M Zielecka, E Bujnowska, M Wenda… - US Patent …, 2016 - ,Silica nanopowders with biocidal properties, especially for polymer composites, are produced by sol-gel method. The silica sol is produced from the aqueous mixture containing tetraalkoxysilane, in which alkoxy group contains from C 1 to C 4 carbon atoms, an alcohol.

151. NANOCOMPOSITE OF Ag0NPs SUPPORTED ON SIO2 MICROSPHERES INDUCES WOUND HEALING IN EXPERIMENTAL SKIN INCISIONS.; I Yanez-Sanchez, FJ Galvez-Gastelum… - Digest Journal of …, 2018 - chalcogen.ro.

Arbitraje de artículo nivel internacional

1. Ms. Ref. No.:  TRIBINTD1500709 Title: Tribological characterization of electroless Ni-B coatings on commercial purity magnesium, Tribology International

2. Ref. No.:  MATCHEMPHYSD1501553, Title: Gaining new insight into low-temperature aqueous photochemical solution deposited ferroelectric PbTiO3 films, Materials Chemistry and Physics.

3. TITLE: Lattice distortion and orbital hybridization in NdFeO3PbTiO3 ferroelectric thin films, DTART-092015003611

4. Ms. Ref. No.: JALCOMD1601687 Title: Fabrication and Mechanical Characterization of High Performance Rare Earth Permanent Magnet SmCo5 films Journal of Alloys and Compounds.

5. Ms. Ref. No.: MATCHEMPHYSD1501553R1 Title: Gaining new insight into lowtemperature aqueous photochemical solution deposited ferroelectric PbTiO3 films Materials Chemistry and Physics.

Arbitraje de artículo nivel nacional

Effect of annealing temperature on the microstructure of hyperduplex stainless steels, Revista Ingeniería Investigación y Tecnología.

Arbitraje de proyectos científicos o tecnológicos

1. " 000000000270878 " con el titulo " Laboratorio Nacional de Materiales Grafénicos (consolidación) " perteneciente al Fondo " F0003 " en su convocatoria " F0003201603 ".

2.  "000000000252296", con titulo "Síntesis, estructura y caracterización física de algunas películas delgadas ferroicas", del proponente "CASTELLANOS GUZMAN,ALEJO GUILL", presentado en respuesta a la Convocatoria "Investigación Científica Básica 2015" del Fondo "Fondo SEP - CONACYT"

Pertenencia al Sistema Nacional de Investigadores

SIN I

Pertenecer a un Comité Evaluador Externo como: SNI, Fondos Sectoriales, CONACYT

PEI CONAYT, CIENCIA BASICA CONACYT

Obtención de Doctorado o Posdoctorado en el período evaluado

Registro de patente Fibra óptica recubierta con nanopartículas de plata como material de obturación de conductos

radiculares de piezas dentales. Alfredo Nevárez Rascón, Erasmo Orrantia Borunda, Sergio Gabriel Flores Gallardo, Abel Hurtado Macías, Gustavo Camacho Villarello, MX/a/2014/015383.

Título de patente

Registro de Derechos de Autor

Editor de Revistas o Libros publicados.

Artículos en Revistas de Difusión Científica, incluyen solo: Revista ciencia de la Academia Mexicana de Ciencias, Avance y Perspectiva del CINVESTAV, CiENCiA UANL de la Universidad Autónoma de Nuevo León y Ciencia y Desarrollo del CONACYT.

Otros Méritos (premios o reconocimientos)

FORMACIÓN DE RECURSOS HUMANOS

Curso CIMAV: curricular o propedéutico

Caracterización de Materiales, Maestría en Ciencia de materiales

Temas Selectos de Nanotecnología, Maestría en Ciencia de materiales

Termodinámica, Maestría en Ciencia de materiales

Temas Selectos de Metales 1, Maestría en Ciencia de materiales

Seminario curricular

Taller curricular o coordinador de curso o seminarios de investigación semestrales

Coordinador de Verano de Investigación Científica 2014 y 2015.

Dirección de tesis de doctorado (proceso)

Dirección de tesis de doctorado interna terminada

Juan Ramos Cano con el tema “Procesamiento de Películas PZT Mediante CVD-AA, Cerca a la Zona Morfotrópica y Caracterización de sus Propiedades Microestructurales, Ferroeléctricas y

Mecánicas” Joel Odelín Novelo Segura con el tema ““ESTUDIO DE PROPIEDADES

MICROESTRUCTURALES, MECÁNICAS Y TÉRMICAS DE ALEACIONES NANOESTRUCTURADAS AuCu EN FORMA DE PELÍCULA DELGADA”

Dirección de tesis de doctorado externa terminada

Carlos Alejando Días Moreno estudiante de doctorado con el tema"Comportamiento magnético en LiNbO3 nano-cristalino causado por vacancias de oxígeno." (2014)

Dirección de tesis de Maestría (proceso)

Pedro David Mares Castro, DISEÑO Y SIMULACIÓN DE UN MICRO-COSECHADOR DE ENERGÍA POR EL EFECTO PIEZOELÉCTRICO BASADO EN TECNOLOGÍA MEMS

Anery Suarez Vasquez, Estudio de las propiedades piezoeléctricas y mecánicas en materiales ferro eléctricos, Maestría en Nanotecnología

Dirección de tesis de maestría interna terminada

Isaac Osuna Marmolejo, Maestría en Nanotecnología, Jun 06 2014

Carlos Roberto Ascencio Hurtado, Maestría en Ciencia de Materiales, May 30 2014,

Dirección de tesis de maestría externa terminada

Sergio David Villalobos Mendoza  con el tema:"Magnetismo En Nanocristales De Tantalato De Litio".  (2015). Estudiante de la CIMAV-UACJ

José Ramón Orduño Apodaca, con el tema Propiedades Físicas de Morteros elaborados con materiales reciclados UAS-CIMAV, (2018)

Dirección de tesis de licenciatura terminadas

Mónica Galván Cabello con el tema Caracterización estructural, química y nano mecánica de PZT dopados con Ag y La. CIMAV-ULSA

Diseño de plan de estudio aprobado

Diseño de programa de estudio aprobado

Rediseño de programa de estudio aprobado

Participación en comités tutorales

Josué Javier Martínez Flores, Doctorado en Ciencia de Materiales 2014

Ángel Fabián Mijangos, Doctorado en Ciencia de Materiales 2015

Felipe Carlos Vásquez, Doctorado en Ciencia de Materiales 2015

Sinodal de examen de grado de maestría o doctorado, interno o externo

1. Manuel de Jesús Palacios Gallegos Doctorado en Ciencia de Materiales 13 de febrero de 2014

2. Miguel Ángel González Trujillo Doctorado en Ciencia de Materiales 11 de marzo de 2014

3. Víctor Manuel Carrillo Vázquez Doctorado en Ciencia de Materiales 12 de septiembre de 2014

4. Gonzalo Guízar Martínez Maestría en Nanotecnología 30 de mayo de 2014

5. Carlos Alberto Partida Carvajal Maestría en Nanotecnología 30 de mayo de 2014

6. Héctor Ulises Cabrera Villaseñor Maestría en Nanotecnología 30 de mayo de 2014

7. Javier Garnica Soria Maestría en Nanotecnología 11 de agosto de 2014

8. Edgar Fernando Pacheco Escalante Maestría en Nanotecnología 11 de agosto de 2014

9. Sergio Ricardo de Jesús Medina Cámara Maestría en Nanotecnología 18 de agosto de 2014

10. Jesús Humberto Peet Manzón Maestría en Nanotecnología 18 de agosto de 2014

11. José Laureano Rodríguez Alonzo Maestría en Nanotecnología 18 de agosto de 2014

12. Temístocles Mendivil Reynoso Doctorado en Ciencia de Materiales 12 de junio de 2015

13. Juan Carlos Rodríguez Gómez Maestría en Energías Renovables 14 de diciembre de 2015

14. Julio César Lemus Hernández Maestría en Energías Renovables 14 de diciembre de 2015

15. Gabriela Pineda Chacón Doctorado en Ciencia y Tecnología Ambiental, 19 de febrero de 2016

16. Rogelio Rodríguez Maese Doctorado en Ciencia y Tecnología Ambiental 26 de mayo de 2016

17. Felipe Carlos Vásquez Doctorado en Ciencia de Materiales 1 de julio de 2016

18. Hansel Manuel Medrano Prieto Doctorado en Ciencia de Materiales 27 de febrero de 2017

19. Eduardo Uriza Vega Maestría en Ciencia de Materiales 4 de agosto de 2017

Organización de Congresos Locales, Nacionales o Internacionales o eventos similares

VINCULACIÓN

Ingresos facturados por derechos de patentes, proyectos, cursos, asesorías.

Proyecto Año Monto FacturadoDesarrollo de nano-compuesto polimérico en master batch a base de nanopartículas metálicas y cerámicas con propiedades antibacterianas para su uso en enseres domésticos (2014).

$431,034.48

Escalamiento a nivel pre-industrial para la producción de nanocarbonato de calcio funcionalizado, con aplicación en sistemas de Poliolefinas/Nano-CaCO3 para mejora de propiedades fisicomecánicas (2016).

$480,000.00

Desarrollo de un aditivo nanoestructurado de bajo costo con características hidrófobas para su aplicación en empaques y embalajes a base de derivados de celulosa y su escalamiento a nivel pre-industrial (2017)

$689,655.17