Download - SEPD1683 New Product Link Software
Cerrar SIS
Pantalla anterior
Bienvenido: r080mmv
Producto: NO SE HA ESCOGIDO NINGUN EQUIPO
Modelo: NO SE HA ESCOGIDO NINGUN EQUIPO
Configuración: NO SE HA ESCOGIDO NINGUN EQUIPO
Información Técnica2013/10/21
Número de medio -SEPD1683-00 Fecha de publicación -21/10/2013 Fecha de actualización -21/10/2013
i05466084
New Product Link Software for PL300 Is Now Available for
All Cat ®
Products {7606, 7620}
SMCS - 7606; 7620
Caterpillar Products:
All
ReferenceSystems Operation, Troubleshooting, Testing and Adjusting Manual, RENR7911, "Product Link 121S/300"
New Product Link software for PL300 is now available for all Cat ® Products. The new software is available for PL321SR systems with the Electronic Control Module (PL300). The new software contains improvements and enhancements that are listed below:
Improved fuel information reporting accuracy by providing the correct fuel information on the expected day
•
Enhanced utilization messaging reporting for data accuracy•
Enlarged message queue to enable coping with longer periods of limited satellite coverage•
If needed, adjust the internal Product Link clock to agree with Service Meter Hours (SMH) of the machine as indicated on the hour meter after flashing the new software.
The new software part number is listed in Table 1.
New Product Link PL300 Software
New
Part
Number
Part
Name Description
Product Link ECM to
be Flashed
Table 1
Página 1 de 2Búsqueda avanzada de texto completo - SEPD1683 - 2013/10/21
14/01/2014https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s...
445-2631 CommunicationSoftware Gp
PL300 Software (Gateway)(A4:N1)
285-1133 and 239-9954
Notes
Note: To obtain the full benefits of the improvements and enhancements, both the radio and the gateway software must be flashed. The latest software for the PL121 radio can be found in SIS
Web. This radio firmware is updated using Caterpillar Electronic Technician (Cat® ET) Subsystem Module Programming.
Note: Prior to service trip, launch SIS Web and ensure that the new flash file part number is the latest flash file part number. A newer flash file part number may be available
Note: Additional information including a list of Product Link flash files can be found at the "Service Technician's Toolbox" web page found on dealer.cat.com. Product Link website -https://dealer.cat.com/pl.
Note: Before using Communications Adapter 3 (CA3), make sure that the PC drivers and CA3 firmware have been updated. CA3 news, drivers, and firmware are available at "https://dealer.cat.com".
Note: The new software is flashed onto the Module using "WinFlash". Always use the latest
version of Cat ® ET for the optimal machine software support.
Note: Queue a registration message after successfully flashing the software.
Copyright 1993 - 2014 Caterpillar Inc.
Todos los derechos reservados.
Red privada para licenciados del SIS.
Tue Jan 14 10:14:18 EST 2014
r080mmv
Página 2 de 2Búsqueda avanzada de texto completo - SEPD1683 - 2013/10/21
14/01/2014https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s...