Download - gcis-zenworks7.2
Zenworks
Bienes, servicio e infraestructura
Versión: 1.0
Fecha de Publicación: Julio 2008
Acuerdo de Confidencialidad del Documento.
Derechos reservados. El contenido de este documento es propiedad confidencial. Cualquier reproducción completa o de alguna de sus partes quedan estrictamente prohibidas sin el permiso por escrito de GCIS®.
En caso de que este documento sufra algún cambio, comentarios, correcciones o preguntas deberán ser notificados del autor.
Tabla de Revisiones
La siguiente tabla refiere la lista de revisiones efectuadas a este documento. Úsela para describir los cambios o agregados cada vez que este documento sea actualizado y publicado.
La descripción debe mostrar el mayor detalle posible, así como el nombre de quienes solicitaron/realizaron los cambios.
Fecha Autor Descripción de los cambios
Julio 2008 Martìnez Hernandez Edgar Creación
Julio 2008 Perez Ramos Jose Ramon Creacion
Julio 2008 Ramirez Torres Manuel Alejandro Creacion
Contenido
Tabla de Revisiones 1
Contenido 1
Objetivo 2
Objetivo
Describir la instalacion de Zenworks
Requisitos del sistema:
Hardware: Memoria RAM minimo de 1GB
Espacio libre de disco 500 MB minimo, se recomienda 4GB
Software: SUSE Linux Enterprise Server 10 SP1 o SP2
Novell Zenworks Server Management 7.2
eDirectory
ConsolOne
java-1-5-ibm, java GCC
Librerias de SLP
Librerias LDAP
Instalacion
*Instalacion de SLES 10 SP2
*Hacer la red multicast:
route add -net 224.0.0 netmask 240.0.0 eth0
*Instalacion de java:
Ingresar al yast e instalar los paquetes de java -GCC
java -1-5-ibm
java -1-5-devel
java -1-5-dvc
java -1-5-plugin
java-1-5-jre
*Instalacion de eDirectory:
Ingresar al cd de eDirectory/setup
Ejecutar ./nds-install
*Instalcion de ConsoleOne:
Ingresar al cd de ConsoleOne/Linux
Ejecutar ,c1-install (recomendacion instalar uno a la vez)
*Levantar NICI:
Ingresar a /var/novell/nici
Ejecutar ,/set_server_mode
Creacion de arbol de eDirectory
Ingresar /opt/novell/eDirectory/bin
Ejecutar ,/ndsmanage
linux-r31w:/opt/novell/eDirectory/bin # ./ndsmanage
Server instances management utility for
The following are the instances configured by root
for more options, [c] for creating a new instance or [q] to quit: c
(“c” es para crear y “q” pra salir de la instalacion)
You have opted to create a new instance of eDirectory. Ensure that you have all the configuration planned before you proceed further. (Refer to the eDirectory Installation Guide for more information on the configuration.)
If you choose to continue and if you are unsure of any of the configuration values, please abort and use the ndsconfig utility to create the new instance.
CINTINUAR CON LA CREACION DEL ARBOL
Do you want to continue? (y or [n]): y
CREAR UN NUEVO ARBOL
Create a new tree ? (y or [n]): y
Choose a tree name that can be unique in the network.
NOMBRE DEL ARBOL
TREE NAME: ejemplo
Server name is the representation of this instance's server object in the eDirectory tree. [Ex: linux-r31w-root-1]
NOMBRE DEL SERVIDOR
SERVER NAME: linux-r31w
Server context is the Fully Distinguished Name (FDN) of the container under with the server object resides. [Ex: ou=servers.o=myorg]
CONTEXTO DEL SERVIDOR
SERVER CONTEXT: cualquiera
You need the credentials of a user in the tree for configuring the server. (Refer to the eDirectory Administration Guide for the effective rights required for such a user). [Ex: cn=admin.ou=users.o=myorg]
ADMINISTRADOR DEL ARBOL
ADMIN USER: nombre.cualquiera
NUMERO DEL PUERTO NCP (SE RECOMIENDA 524)
NCP Port number to listen on: 524
Please specify the absolute location for this instance of eDirectory. The dib,log files and nds.conf go into this directory. [Ex: /home/root/instance1/]
DIRECCION DE LA INSTANCIA (SE RECOMIENDA SEGUIR EL EJEMPLO)
Instance location: /home/root/instance1/
Please specify the absolute location and filename of the configuration file. [Ex: /home/root/instance1/nds.conf]
DIRECCION DE LA CONFIGURACION DENTRO DE LA INSTANCIA
Configuration file: /home/root/instance1/nds.conf
CREAR PASWORD
Enter the password for nombre.algo:
Re-enter the password for nombre.algo:
INFO: Port "8030" is already in use on "192.168.1.164" network interface(s)
Enter HTTPS port no. [Range: 1 - 65535]: 65535
Done
Configuring the LDAP interfaces...
INFO: Port "389" is already in use on "all" network interface(s)
Enter LDAP port no. [Range: 1 - 65535]: 65000
INFO: Port "636" is already in use on "all" network interface(s)
Enter LDAPS port no. [Range: 1 - 65535]: 636
INFO: Port "636" is already in use on "all" network interface(s)
Enter LDAPS port no. [Range: 1 - 65535]: 65200
Done
Configuring Novell eDirectory server with the following parameters, Please wait...
Tree Name : ejemplo
Server DN : linux-r31w.algo
Admin DN : nombre.algo
NCP Interface(s) : 192.168.1.164@395
HTTP Interface(s) : 192.168.1.164@2008
HTTPS Interface(s) : 192.168.1.164@65535
LDAP TCP Port : 65000
LDAP TLS Port : 65200
LDAP TLS Required : Yes
Duplicate Tree Lookup : No
Configuration File : /home/root/instance1/nds.conf
Instance Location : /home/root/instance1/data
DIB Location : /home/root/instance1/data/dib
Starting the service 'ndsd'... Done.
Checking if server is ready to service requests... Done
Basic configuration is successful. Proceeding with additional configuration...
Extending schema... Done
For more details view schema extension logfile: /home/root/instance1/log/schema.log
Configuring HTTP service... Done
Configuring LDAP service... Done
Configuring SNMP service... Done
Configuring SAS service... Done
Associating certificate with the NCP server object... Done
Configuring NMAS service... Done
Configuring SecretStore... Done
Configuring LDAP Server with default SSL CertificateDNS certificate... Done
Updating LDAP TCP port with 65000... Done
Updating LDAP SSL port number with 65200... Done
The instance at /home/root/instance1/nds.conf is successfully configured.
/home/root/instance1/nds.conf
The following are the instances configured by root
ARBOL CREADO Y ACTIVO
[2] /home/root/instance1/nds.conf : .LINUX-R31W.ALGO.EJEMPLO. : 192.168.1.164@395 : ACTIVE
CREAR OTRO ARBOL, BORRAR O ACTUALIZAR
Enter [r] to refresh list, [1 - 2] for more options, [c] for creating a new instance or [q] to quit:
SUGERENCIA: Se recomienda ejecutar ConsoleOne para serciorarse de que el arbol esta actvivado ejecutando /usr/ConsoleOne/bin/ConsoleOne
*instalacion de Zenworks Server 7.2
Crear carpeta para montar las isos en /mnt
ejecutar el comando mkdir nombre de la carpeta
Montar la iso Zenworks7.2
ejecutar el comando mount -o loop nombre de la iso /mnt/carpeta creada
estando en la carpeta ejecuta ./ zlm-install