Adaptador USBa serial DB9,de 1,8 m
Manual de instrucciones
Antes de utilizar el producto, lea el siguiente instructivo para evitar cualquier mal funcionamiento.• Este aparato no se destina para utilizarse por personas (incluyendo niños), cuyas capacidades físicas, sensoriales o mentales sean diferentes o estén reducidas, o carezcan de experiencia o conocimiento.
• Los niños deben supervisarse para asegurar que no empleen el aparato como juguete.
• No exponga el producto a temperaturas extremas.
• No lo use ni almacene en lugares donde existan goteras o salpicaduras de agua. Puede causar un mal funcionamiento
- CPU con una velocidad de 100 MHz o superior
- 1 puerto USB disponible
- Lector de CD - ROM
- Windows Vista
Instale los controladores antes de conectar el adaptador a la computadora.
1. Abra el archivo comprimido ZIP donde encontrará el archivo Vista Driver Installer
2. Haga doble clic sobre el archivo para comenzar la instalación.
3. Aparecerá la siguiente pantalla, presione “ Next ” para empezar con la instalación de los controladores.
Alimentación: 5V --- 100 mA
4. Por último, presione Finish para terminar con la instalación
Conecte un equipo serial al adaptador y el extremo contrario a un puerto USB de la computadora.
V1.0
USB-SER
1117A
REQUERIMiENTOS DE SISTEMA
ESPECIFICACIONES
INSTALACION DE DRIVERS EN WINDOWS vista
www.steren.com
´
1.8 m USB to DB9 serial adapter
INSTRUCTION MANUAL
Before using the product, read the following instructions to avoid any malfunction.• This device is not intended for use by people (including children), whose physical, sensory or mental abilities are different or reduced, or who lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Do not expose the product to extreme temperatures.
• Do not use or store it in places where there are leaks or splashes of water. It can cause a malfunction.
-CPU with a speed of 100 MHz or higher
- 1 available USB port
- CD-ROM reader
- Windows Vista
Install the drivers before connecting the adapter to the computer.
1. Open the ZIP compressed file where you will find the Vista Driver Installer file
2. Double-click on the file to begin the installation.
3. The following screen will appear, press "Next" to begin with the installation of the drivers.
Input: 5 V --- 100 mA
4. Finally, press Finish to finish the installation
Connect a serial device to the adapter and the opposite end to a USB port on the computer.
V1.0
USB-SER
1117A
SYSTEM REQUIREMENTS
SPECIFICATIONS
INSTALLATION OF DRIVERS IN WINDOWS vista
www.steren.com