d 150 presentation

Semi automatic machine the D150 and the 150M

The strong Points

Trade mark DUBUITA world wide known model D_150

5000 units solde world wideUnmatched Universality

Build for lasting some model manufactured in 1964 are still in use

Main feature

Level of the screen always constantPneumatic squeegeeLift of the screen through a parallelogram linkage

Main feature

Central cam fora) Lifting screenb) Screen stroke

Unmatched Universality

• Chnaging from falt to cylinder in less than 5 minutes

• In two clics


Only four screws too loosen for changing from screen movement to squegee movement

Registration with a pointer for rigid cylinders

Object is fixed in the horizontal plane

Printing on plastic bottles between chuck and counter point with roller ware holders and inflating device

The same with auto registration

Oval printing

Oval two side attachment

Oval two side attachment shift of the screen

Conical printing with special counterpoint

Registration on the side

of the bottle through electro magnet

Printing two colors

Double stroke attachment

Registration for double or triple stroke

Triple stroke attachment

Triple stroke attachment:drive of the mandrel

Triple stroke attachment:drive of the screen

Conical for large object

Long object device for burette ski poles etc..

Printing flats

• In few minutes the machine can be turned to flat printing mode

• It can print on various objects but can also have its stroke increased to 600mm and even 700mm .

• The machine can be also dedicated to special applications like crate printing with or without automatic flip device to print on two opposite sides


Flat printing possibilitiesUnmatched Universality

Standard flat support

When the machine stops the level of the screen is 70mm from the object (lift stroke)Therefore for each object it is necessary to set its height as the level of the screen in down position is always the same This setting is made through a hand wheel (Standard device on DFE machines)

Holders are specific to the object and made on demand

Flat bottle holder

Fholding device for flat plastic container

Double stroke attachment increasing the stroke to 600mm or 700mm

Impression de courroie à plat

Printing on chanpagne wooden box

Printing on crate one side

Printing on crate two sides

Two side printing device

Drive of the two side printing device for crates

Dwell screen drive

Dwell screen drive

Ensure a vertical lift at both ends of the stroke during 60° of the machine cycleDevice not manufactured in Thailand

Special device for printing four sides of an object

Printing of heavy container

• Possible because• The main frame is in cast iron versus

aluminium for the Chinese machine which give to the machine its strongness

• Because the object is fixed• It wide possibilities in term of length of the

stroke gives a wide variety of possibilities

Printing of heavy containers like gas bottle or fire extinguishers

Drive by the screenStrongly builtPrinting on heavy containers

Positioning in height and rotationStrongly builtPrinting on heavy containers

Screen driveStrongly builtPrinting on heavy containers

Chuck drive with sliding tableStrongly builtPrinting on heavy containers

Chuck drive by gear and rackStrongly builtPrinting on heavy containers

Drive through the rollers with sliding table

Strongly builtPrinting on heavy containers

The sliding table with driven rollersStrongly builtPrinting on heavy containers

Dirve of the rollerStrongly builtPrinting on heavy containers

Sliding table with longt object printing attachment with an increased stroke of

300mm

ROBUSTESSEIMPRESSION D’OBJETS LOURDS

Drive of the screenStrongly builtPrinting on heavy containers

Machine in working conditions Dryers

d 150 presentation

Engineering