h de datos flujo.pdf
Post on 25-Dec-2015
222 Views
Preview:
TRANSCRIPT
0 20-Mar-13 JRB LDO JAR
A 05-Mar-13 JRB LDO JAR
P 19-Feb-13 JRB LDO JAR
REV FECHA ELABORÓ REVISÓ APROBÓAPROBÓ
CLIENTE
Aprobado para continuar a la siguiente fase
P15-09-101 SCO-5205334-12101-IB-INS-HD-226-0
Emitido para revisión y comentarios del cliente
Emitido para revisión interdisciplinaria
DESCRIPCIÓN
PROYECTO ENERGÉTICOS No. DOCUMENTO No.
AJUSTE INGENIERÍA BÁSICA DESARROLLO FACILIDADES
CAMPO TIBÚ - CPF SOCUAVÓ (K-27)
Hoja de Datos Indicadores de Flujo - Reubicación del
Sistema de Inyección
1 Tag number: 55 Orifice holding block: Yes No
2 Vessel, Line, or Equipment No.: 56 Gasket set: Yes No
3 Number required: 57
4 Service description: 58
5 Area: 59
6 P&ID No.: 60
7 Component type: Orifice plate Restriction orifice N/A
8 Integral orifice assembly Orifice plate-meter tube 61
9 Other: 62 End conn. nominal size: Rating:
63 End conn. terminal type: Style:
10 Fluid and state: 64 Flange facing finish:
11 Process design temp & units: 65 Upstream length: Pipe sch. No.:
12 Process design press & units: 66 Downstream length: Pipe sch. No.:
13 / / 67 Coupling quantity:
14 Flow rate. Max, Min & units: BPD 68 Coupling nominal size: Rating:
15 Temperat. Normal & units: °F 69 Coupling locations:
16 Inlet press.Normal & units: psig 70 Internal bore diameter & units: in
17 Density Sp. Grav. lb/ft3 71 Flow straightener type:
18 Viscosity at temp & units: cP 72 Pipe/tube material:
19 Molecular weight: 73 Bolting material:
20 Compressibility factor: 74 Exterior coating material:
21 Specific heat ratio (k-factor): 75 End termination material:
22 Corrosive compounds: 76 Gasket material:
23 Other: 77
24 78 Max. work press. at design temperature: at
25 Permanent pressure drop & units: 79 Design temperature & units: Min. Max.
26 80 Ambient working temp. & units: Min. Max.
27 81
28 82
29 83
30 84
31 Rating: 85
32 End connec. terminal. type: Style: 86
33 Flange facing finish: 87
34 End connection schedule no.: 88
35 Pressure tap conn. nominal size: Style: 89
36 90
37
38 91 Estimated weight & units:
39 Jack screw material: 92 Face-to-face dimension:
40 93 Overall height:
41 94 Removal clearance height:
42 Other: 95 Construction code:
43 96 Other:
44 97
45 98 Manufacturer: Vendor list ECP
46 Rating: 99 Model number: By Mfr
47 100 Other:
48 101
49 0.211 Internal Orifice bore diam.: 1.672 in
50 Plate outside diameter: By Vendor in 102
51 Vent/drain hole size: Vent/drain hole location: N/A 103
52 Stampings required: 104
53 Plate material: 316 SS Seal material: 105
54 Holder/Ring material: N/A 106
1.Seller shall provide the paddle plate permanently stamped with the following information : Orifice Plate Tag, Plate Material, line size, Rating,
Inlet ( on upstream side), & Bore.
2.Seller shall provide the sizing calculation for bore and material certificate.
3.Orifice flanges will be provided by others.
4.Pre-size data, shall be confirmed by vendor.
5. ISO 5176 to be used as standard calculation method.
6. Seller shall ensure the operability of the equipment to the process conditions and must deliver the calculations
Mat. size, rating, bore, tag
NOTES:
Diameter ratio (Beta d/D): ADDITIONAL REQUIREMENTS
Plate thickness: 0.4761
Orifice bore type: Concentric
Orifice inlet edge style: Square Edge
Plate type: Universal Type
Holder/seal unit style: Yes / Doublecamera
API ring No.: N/A 150#
By Vendor
ORIFICE PLATE AND HOLDER COMPONENTS IDENTIFICATIONS
Trim material: N/A Bolting/Nuts material: ASTM A193 Grb7 / A194 Gr2H By Vendor
Gasket material:SPRL CUND 304 SST
w/ graphiteLubrication mtl: By Vendor
Centering / Dowels pin: N/A By Vendor
N/A Flange/fitting mtl: A-105 By Vendor
Pressure tap orientation: N/A
Tap connection plug type: N/A PHYSICAL DATA
20 Construction code: By Vendor
1/2 in NPT(F)
RF Compliance standard: N/A
N/A Calculation report: Required
Pressure tap style: Flange taps Reference specification: N/A
End conn. nominal size: 8" 150# Special preparation: N/A
ORIFICE FLANGE OR FITTING SPECIAL REQUIREMENTS
Flange / fitting type: FLG WN (Note 3) Custom tag type: N/A
Line Reynolds number: 306956 Flow coefficient uncertainty:
Calculated uncertainty: 0.5843
Pressure differential & units: 5 psig 160 °F
140 °F 160 °F
Line fluid velocity & units: 64,4 °F 100, 4 °F
270 psig
CALCULATED VARIABLES PERFORMANCE CHARACTERISTICS
0.76 0.68 0.61
40 43 48
62.54 62.28 62.01
11200 16000 19200
90 100 110
130 psig
Operating ConditionsMIN NORMAL MAX
OPERATING CONDITIONS
Water
150 °F
SCO-5205334-12101-IB-PRO-PID-220_1
METER TUBE
Bore type:
Agua desde pozos abastecedores
Bombas de transferencia de crudo
GENERAL PERFORMANCE CHARACTERISTICS
FE-2001 (Orifice plate)
8"-CLW-1202-AA1A33
AJUSTE INGENIERÍA BÁSICA DESARROLLO FACILIDADES CAMPO TIBÚ - CPF
SOCUAVÓ (K-27)
SCO-5205334-12101-IB-INS-HD-226-0
Documento No.
Hoja de Datos Indicadores de Flujo - Reubicación del Sistema de Inyección Revision: 0
One (1)
SCO-5205334-12101-IB-INS-HD-226-0.xls 1 de 2
1
2
3 SCO-5205334-12101-IB-PRO-PID-220_1
4 8"-CLW-1202-AA1A33
5 Line size and schedule 8" 150#
6
7
8
9
10
11
12
13 Speed:
14
15
16 Action
17
18
19
20
21
22 No. Of Inputs
23
24
25 N/A
26
27
NOTES 28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
1. Sizing calculation shall be confirmed and submitted by vendor. Meter body shall reduce line size as required by meter.
2. Seller shall provide all engineering; installation, operation and maintenance manuals, drawings; and shall quote engineering Installation, start-up assistance and training.
3. Seller shall quote spare parts for two years operation, consumable for start-up and commissioning activities.
4. Manufacturer shall confirm required straight runs upstream and downstream of the meter.
5. Seller shall ensure the operability of the equipment to the process conditions and must deliver the calculations
MFR & Model No. By MFR
INPUTS
Input Signals Liquid pressure
2 (H and L pressure connections)
Power for XMTRS
ALARMS
Alarm Switches NO
Function
Output N/A
N/A
Options N/A
Scales BPD
CONTROLLER
Control Modes
N/A
Auto-Man Switch N/A
Set Point Adj.
GENERAL
Function Register
Tag Number FQI-2001
N/A
Enclosure Class Weather Proof
Power Supply N/A
Chart CIRCULAR Range: 0 - 20000 BPD
Manual Reg N/A
Mounting Panel
Service Agua desde pozos abastecedores
P&ID
Line No./Eqpt. No.
Manufacturer By vendor list ECP
Chart Drive Power: Spring-woundBy Mfr
AJUSTE INGENIERÍA BÁSICA DESARROLLO FACILIDADES CAMPO TIBÚ - CPF
SOCUAVÓ (K-27)
SCO-5205334-12101-IB-INS-HD-226-0
Documento No.
Hoja de Datos Indicadores de Flujo - Reubicación del Sistema de Inyección Revisión: 0
Model By Mfr
Case Mfr STD
P PI PID If Df Is Ds
SCO-5205334-12101-IB-INS-HD-226-0.xls 2 de 2
top related