configuración de raid mediante smartstart cd
Post on 14-Feb-2016
10 Views
Preview:
DESCRIPTION
TRANSCRIPT
Configuración de RAID mediante
SmartStart CD
A. Cambiar configuración RAID de discos utilizando SmartStart CD (por conexión física)
Para ello necesitamos primero arrancar la máquina con HP Smartstart CD que tiene la pantalla de
configuración de Array Configuration Utility (ACU):
De Asistente de la OIT, el primer lanzamiento de consola remota "Integrado de consola remota" (sólo
funciona en IE).
Vamos a encender la máquina: Ir al Estado del sistema -> pantalla Resumen. Haga clic en
"momentáneo de Prensa"
Una vez el botón de encendido del equipo es "on", inserte inmediatamente el CD SmartStart de HP para
que la máquina arranca desde el mismo.
Siga las instrucciones hasta que aparezca "SmartStart Home"
Haga clic en "Deploy Server" -> "Launch ACU"
* Haga clic en "SAS Array A" y eliminarlo (o usted puede hacer clic en Borrar configuración).
* Después de la eliminación se mostrará todos los discos duros físicos disponibles para su uso.
* Ahora crearemos new Array usando "Asistentes de configuración" disponible en la parte inferior derecha de
la pantalla. En la siguiente pantalla, haga clic en "Create Array" -> Comience
* Select Drive Tipo de Array -> SAS
Check "Seleccionar todo". Será "crear SAS Array A" con el espacio no utilizado, 69ES.Haga clic en fin.
* Haga clic en "Crear una unidad lógica" -> siguiente pantalla tiene Array A selected Ir "Siguiente"
* Seleccione una tolerancia a fallos para la nueva unidad lógica: seleccione 0 RAID
Seguimiento de configuración, ya que es hasta que vea el "enter tamaño para la nueva unidad lógica:
"Introduzca el tamaño máximo como es: 69,399
Una vez más siguen configuración predeterminada hasta que vea el final. No se olvide de guardar la
configuración.
////////////////////////////////////////////////////////////////////////////////////////////////////////
Configure hardware RAID using HP Array Configuration
Utility 2
BY MARTINO RENATO ON MAY 10, 2014SERVER
What is RAID? RAID stands for Redundant Array of Independent Disks. So what is it? The answer
will be, it is a technology or feature which gives fault tolerance and reliability through hard drive
redundancy. In a RAID configuration, multiple physical hard disk drives are combined to one logical
drive and the data is distributed evenly across multiple physical hard drives. As multiple hard drives are
combined in RAID, you will be able to achieve high level of Redundancy. Moreover, if one of the hard
drive fails, then you would be able to restore the data.
Hardware RAID is one of the basic feature you would expect from any enterprise Server. In our
Dataceneter, we do have lots of HP Servers. They are very reliable and robust. Most of the HP Servers
are shipped with HP Smart Array Controller which allows you to configure different RAID levels on
your Server. HP P400, HP P410 and HP P420 are some of the HP Smart Array Controller which I have
worked with.
If you need to setup Hardware RAID on your Server, you need to use a utility which will help you to do
it. HP Array configuration Utility (ACU) is one of the HP utility which helps you to configure RAID on
your Server. Another utility you could use is HP Smart Storage Administrator. In this article, we will
stick with HP ACU. ACU provides easy to use graphical user interface which will allow you to
configure/change RAID levels of your HP Server. You need to ensure that you create a Hardware RAID
on your Server using HP ACU or ORCA before you try installing any OS on your Server.
NOTE: ACU works only with HP Smart Array controllers. It will not work with entry level Embedded
SATA controller installed on your HP Server.
If you are using Cisco UCS, IBM or Dell Servers, then you should use the RAID configuration utility
provided by respective manufactures. ACU helps you to Create an array, Create a logical drive, Delete logical drives, Delete array, Expand an array, Extend an array, Migrate Raid level of the array and Spare
drive management.
HP Array configuration Utility (ACU) is available in both Online and Offline version. You can use the
online version of ACU if you server is installed with Windows and Linux operating system. If the
operating system is not yet installed then you need to configure RAID using Offline version of ACU or
using ORCA. ACU is tool available in HP SmartStart CD and you can launch it by booting to SmartStart
CD.
In Windows you can launch ACU by Clicking Start –> Programs ->HP System Tools –> HP Array
Configuration Utility. Apart from creating RAID, ACU also allows you to expand Array, extend
logical drive and migrate RAID levels on your HP Server.
If you are using HP Gen8 Servers, then SmartStart CD could not be used to launch HP ACU. Instead,
you need to use HP Intelligent Provisioning which is an embedded software. Intelligent Provisioning
does comes with ACU and you can launch ACU from Intelligent Provisioning.
As per my understanding, HP has stopped developing Array Configuration Utility. But the good news is,
they released a new utility which is called HP Smart Storage Manager. This new utility looks almost
similar to HP ACU but does provide more features.
In this post, I will explain how to configure RAID on your Server using ACU (Offline). If Operating
System is already installed and ACU is installed as an application, then you can use the online version of
ACU on your Server. As my server does not have any Operating System installed, I am going to follow
offline method. here, I will boot the server from SmartStart CD, then I will launch the ACU. It is not
mandatory to boot server to SmartStart CD to create an Array or Logical Drive. I am using SmartStart
CD here because there is no Operating System installed on my Server. Let us go ahead and see how to
create a simple RAID volume on your server.
Configure RAID using HP Array configuration Utility (ACU):
1. At first, you need to boot the server using HP SmartStart CD (this might take some time!)
2. Now select language as English (US), keyboard layout as US English, click Next button.
3. Accept HP End User License Agreement by clicking Agree button.
4. Now you will be at the Main Page of HP SmartStart CD.
NOTE: If there is no Logical Drive present on your server, then the SmartStart CD home page will
looks like the one provided below. Both Install and Run Saved Installation options will be unavailable
as there is no Logical drives defined. You can create a logical drive using HP ACU now and these
options will be enabled.
5. Now go ahead and click on Maintenance from the main page of HP SmartStart CD
6. Click on HP Array Configuration and Diagnostics from the Maintenance Option screen of
SmartStart CD.
7. You should see the HP Array Configuration Utility (ACU) opened in your server now.
8. First you need to select the controller, So select the HP Smart Array Controller from the list.
NOTE: If there are multiple Storage controllers available, select the right controller from the list.
Example of Array Controllers are HP Smart Array E200 Controller, HP Smart Array P400 Controller
etc.
9. You are at the main page of HP Array Configuration utility.
10. You could find the available Hard Drives in the list in the left pane of the window.
11. To create an Array, Click on Create Array button as shown above.
12. The Screen will like the one provided below.
NOTE: In our case, we only have 1 Hard drive connected to the Server. Hence you will find only one
hard drive listed. Moreover I will be creating RAID 0 here (RAID 1 needs minimum 2 HDDs).
13. Select the Hard Drives from the list and click OK. The new Array will be created.
14. Next step is to create a new logical drive. So let us do it.
15. To create logical drive, click on Create Logical Drive button.
16. Select the RAID level (Fault Tolerance), also ensure that Array Accelerator is Enabled.
17. Click on Save button to create the logical drive.
NOTE: As we have only one HDD, the only available RAID level is RAID 0, if we had 2 HDD, then
we will get the RAID 1 option as well. If you have 2 HDD installed, then you will find RAID 1 also as
an option. Likewise, If 3 HDDs are installed in your server, then you will find RAID 5 listed in this
window.
18. Success, now you have created RAID 0 logical drive.
19. Click on Exit ACU button to exit Array Configuration Utility.
NOTE: The newly created logical drive will be visible to the Operating System only after it is
formatted inside the OS. Simply creating a logical drive in ACU will not create a new partition inside the
Operating System.
If you are using Windows, then you can use the Windows Disk Management utility to format the new
logical drive/partition you have just created. If you use Linux operating system , then you can
use fdiskcommand to re-partition and mkfs command to format with appropriate file system.
If you require any assistance with RAID inside your HP Server, I would be able to provide some help.
You may leave a comment and I will respond to it. Feel free to share this article with your friends and
family.
top related