actividad comandos switch

Upload: djsoulcolombia

Post on 03-Apr-2018

232 views

Category:

Documents


6 download

TRANSCRIPT

  • 7/28/2019 Actividad Comandos Switch

    1/13

    ACTIVIDAD COMANDOS SWITCH

    1. Determinar cuntas interfaces tiene de fastEthernet y GigabitEthernet y nombre que

    comienzan las interfaces.

    >show running-config

  • 7/28/2019 Actividad Comandos Switch

    2/13

    Los SWITCH Tiene 23 interfaces

    fastEthernet Y 2 GigabitEthernet

  • 7/28/2019 Actividad Comandos Switch

    3/13

    2. Crear 2 vlan, vlan 100(principal) y vlan 200(sucursal), adicione 2 puertos a cada una.

    que vlan creadas, que puertos estn asociados a estas vlan que nombre tiene estas

    vlan. (>show vlan)

    -Switch principal

    Observamos la configuracin

    de la vlan 100(principal) con

    dos puertos Fa 0/1, Fa 0/2

  • 7/28/2019 Actividad Comandos Switch

    4/13

    -switch Sucursal

    3. show flash(Que nombre tiene e indique las partes del archivo)

    Switch principal

    Observamos la configuracin de

    la vlan 200(sucursal) con tres

    puertos Fa 0/1, Fa 0/2, F0/3

    Nombre del archivo

  • 7/28/2019 Actividad Comandos Switch

    5/13

    Switch Sucursal

    Nombre

    de switch

    VersinIOS

  • 7/28/2019 Actividad Comandos Switch

    6/13

    4. Show versin

    Muestra las caractersticas switch,puerto sw version

  • 7/28/2019 Actividad Comandos Switch

    7/13

    5- show interface fastEthernet 0/3 y GigabitEthernet 1/1

    Que ancho de banda tiene(BW)?

    Determine si la interface es full dplex o half dplex?

    Ancho de banda BW

    La interface es Full Duplex

  • 7/28/2019 Actividad Comandos Switch

    8/13

    5. Show mac-address-table

    Ancho de banda BW

    Interface es full Duplex

    Se observa 1 direccin mac

  • 7/28/2019 Actividad Comandos Switch

    9/13

    6. Uso de describe de interfacesSwitch principal utiliza las siguientes interfaces

    Se observa 1 direccin mac

  • 7/28/2019 Actividad Comandos Switch

    10/13

    Switch sucursal Estas son las interfaces que utiliza.

  • 7/28/2019 Actividad Comandos Switch

    11/13

  • 7/28/2019 Actividad Comandos Switch

    12/13

    7. Configuracin ssh

    Esta es el procedimiento para realizar la conexin remoto

    8. Switch(config)#enable secret cisco9. Switch(config)#interface vlan2

    10.%LINK-5-CHANGED: Interface Vlan2, changed state to up

    11.12. %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to up13. Switch(config-if)#ip address 192.168.1.12 255.255.255.014. Switch(config-if)#exit15. Switch(config)#line vty 0 1516. Switch(config-line)#password cisco17. Switch(config-line)#login18. Switch(config-line)#end19. Switch#20. %SYS-5-CONFIG_I: Configured from console by console21.22. Switch#configure terminal23. Configuring from terminal, memory, or network [terminal]?24. Enter configuration commands, one per line. End with CNTL/Z.25. Switch(config)#ip domain-name26. Switch(config)#ip domain-namekathe.com27. Switch(config)#crypto key generate rsa28. The name for the keys will be:kathe.com29. Choose the size of the key modulus in the range of 360 to 2048 for your30. General Purpose Keys. Choosing a key modulus greater than 512 may take31. a few minutes.32.33.

    How many bits in the modulus [512]: 1024

    34. % Generating 1024 bit RSA keys, keys will be non-exportable...[OK]35.36. Switch(config)#ip ssh version 237. Switch(config)#line v38. Switch(config)#line vty 0 1539. Switch(config-line)#tr40. Switch(config-line)#transport input ssh41. Switch(config-line)#end42. Switch#43. %SYS-5-CONFIG_I: Configured from console by console44. copy running-config startup-config45. Destination filename [startup-config]?46. Building configuration...47. [OK]

    http://jqar.com/http://jqar.com/http://jqar.com/http://switch.jqar.com/http://switch.jqar.com/http://switch.jqar.com/http://switch.jqar.com/http://jqar.com/
  • 7/28/2019 Actividad Comandos Switch

    13/13

    Esta pantalla nos indica la configuracin realizada