1n4000 data sheet

5
MOTOROLA DATOS TÉCNICOS DEL SEMICONDUCTOR Rectificadores de recuperación estándar de Conduccion Axial Esta hoja de datos proporciona información sobre el tamaño subminiatura, rectificadores montados de conduccion axial para aplicaciones de baja potencia para fines generales. Características Mecánicas. Encapsulado: Epoxy, Moldeado Peso: 0.4 gram (aproximadamente) Acabado: Todas las Superficies exteriores resistentes a la corrosión y terminales conductores son fácilmente Solderable Direccion y Montaje en Superficie Temperatura para Propósitos de soldadura: 220°C Max. durante 10 segundos, 1 / 16’’ del encapsulado Seentrega en bolsas plasticas , 1000 por bolsa. disponible en madejas, 5000 por carrete, añadiendo un sufijo "RL" al número de pieza Polaridad: Catodo Indicado por la Banda de Polaridad. Marcado: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 CLASIFICACIONES MAXIMAS Order this document by 1N4001/D 1N400 1 A 1N400 7 1N4004 Y 1N4007 son Dispositivos Preferidos de Motorola RECTIFICADORES PLOMO MONTADO 50-1000 VOLTIOS CONEXION DIFUNDIDA ENCAPSULADO 59–03 DO–41 clasificacion SImbolo 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unidad *Tension Inversa Repetitiva Tension Inversa de V RRM V RWM V R 50 100 200 400 600 800 1000 Volts *Tension inversa no repetitive maxima (media onda, monofasico, 60 V RSM 60 120 240 480 720 1000 1200 Volts *RMS tension inversa V R(RMS) 35 70 140 280 420 560 700 Volts *Corrientente Directa Rectificada Promedio (monofasico, carga resistiva, 60 Hz, ver Figura 8, T = I O 1. 0 Amp *corriente pico de sobrecorriente no repetitiva (aumento aplicado en condiciones de carga nominal, ver Figura 2) I FSM 30 (por 1 ciclo) Amp Rango de union de temperature de funcionamiento y almacenamiento T J T st – 65 a +175 C CARACTERISTICAS ELECTRICAS * clasificacion SImbolo Typ Max Unit Maxima caida dentension Instantanea (i F = 1.0 Amp, T J = 25C) Figura 1 v F 0.93 1. 1 Volts Maxima caida de tension de ciclo complete promedio (I O = 1.0 Amp, T L = 75C, 1 pulgada leads) V F(AV) 0. 8 Volts Maxima carriente inversa(tension nominal de C.D.) (T J = 25C) (T J = 100C) I R 0.0 5 10 50 A Maxima corriente inversa de ciclo completo (I O = 1.0 Amp, T L = 75C, 1 inch leads) I R(AV) 30 A *Indica datos registrados JEDEC

Upload: juan-andres-buchan-colin

Post on 10-Feb-2016

3 views

Category:

Documents


0 download

DESCRIPTION

hoja de datos del funcionamiento de un diodo 1n4000

TRANSCRIPT

Page 1: 1N4000 data sheet

Rectifier Device Data 1

MOTOROLA

DATOS TÉCNICOS DEL SEMICONDUCTOR

Rectificadores de recuperación estándar de Conduccion Axial

Esta hoja de datos proporciona información sobre el tamaño subminiatura, rectificadores montados de conduccion axial para aplicaciones de baja potencia para fines generales.

Características Mecánicas. Encapsulado: Epoxy, Moldeado Peso: 0.4 gram (aproximadamente) Acabado: Todas las Superficies exteriores resistentes a la corrosión y terminales conductores son fácilmente Solderable Di r ec c i on y M o n ta je en S up er f i c ie Te mp era tu ra p a ra P r opó s i t o s d e so ld adu r a :220 °C M ax . d u ran te 10 s e gu nd o s , 1 / 1 6 ’ ’ de l e n c aps u l ado S ee n t r e ga e n bo l s as p l as t i ca s , 1000 por bolsa. d i s p o n i b l e e n m a d e j a s , 5 00 0 p o r c a r r e t e , añ a d i en do u n s u f i j o " R L " a l n ú m e r o

d e p i e z a Polaridad: Catodo Indicado por la Banda de Polaridad. Marcado: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

CLASIFICACIONES MAXIMAS

Order this document by 1N4001/D

1N4001 A

1N4007 1N4004 Y 1N4007 son

Dispositivos Preferidos de Motorola

RECTIFICADORESPLOMO MONTADO50-1000 VOLTIOS

CONEXION DIFUNDIDA

ENCAPSULADO 59–03DO–41

clasificacion SImbolo 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unidad

*Tension Inversa RepetitivaTension Inversa de Trabajo picoBloqueo de Tension C.D.

VRRM VRWM

VR

50 100 200 400 600 800 1000 Volts

*Tension inversa no repetitive maxima(media onda, monofasico, 60 Hz)

VRSM 60 120 240 480 720 1000 1200 Volts

*RMS tension inversa VR(RMS) 35 70 140 280 420 560 700 Volts

*Corrientente Directa Rectificada Promedio(monofasico, carga resistiva,60 Hz, ver Figura 8, TA = 75C)

IO 1.0 Amp

*corriente pico de sobrecorriente no repetitiva (aumento aplicado en condiciones de carga nominal, ver Figura 2)

IFSM 30 (por 1 ciclo) Amp

Rango de union de temperature de funcionamiento y almacenamiento

TJ Tstg

– 65 a +175 C

CARACTERISTICAS ELECTRICAS *clasificacion SImbolo Typ Max Unit

Maxima caida dentension Instantanea(iF = 1.0 Amp, TJ = 25C) Figura 1

vF 0.93 1.1 Volts

Maxima caida de tension de ciclo complete promedio(IO = 1.0 Amp, TL = 75C, 1 pulgada leads)

VF(AV) — 0.8 Volts

Maxima carriente inversa(tension nominal de C.D.) (TJ = 25C)

(TJ = 100C)

IR0.051.0

1050

A

Maxima corriente inversa de ciclo completo(IO = 1.0 Amp, TL = 75C, 1 inch leads)

IR(AV) — 30 A

*Indica datos registrados JEDEC

Los dispositivos preferidos son recomendaciones de Motorola para uso futuro y mejor valor total recomendado.Rev 5

Motorola, Inc. 1996

Page 2: 1N4000 data sheet

2 Rectifier Device Data

DIMMILIMETROS PULGADASMIN MAX MIN MAX

A 4.07 5.20 0.160 0.205B 2.04 2.71 0.080 0.107D 0.71 0.86 0.028 0.034F ––– 1.27 ––– 0.050K 27.94 ––– 1.100 –––

PACKAGE DIMENSIONS

B NOTES:1. T O D A S L A S R E G L A S Y

N O T A S A S O C I A D A S C O N E L E S Q U E M S JEDEC DO–41 SE APLICARAN..

2. POLARIDAD DENOTADO POR LA BANDA DE CATODO.3. DIAMETRO DE LEAD NO ESTA CONTROLADO POR LA DIMENSION F..

K D

F

A

FK

CAPSULA 59–03 (DO–41) ISSUE M

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

How to reach us:Mfax is a trademark of Motorola, Inc.

USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488

Mfax: [email protected] – TOUCHTONE 602–244–6609 ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

INTERNET: http://motorola.com/sps

1N4001/

Page 3: 1N4000 data sheet